Test & Measurement

172 products

  • JOY-iT PSG9080 Programmable Signal Generator (80 MHz)

    JOY-iT JOY-iT PSG9080 Programmable Signal Generator (80 MHz)

    1 review

    The PSG9080 programmable signal generator can generate many different waveforms such as sine, square, triangle, pulse and custom waves. The signal generator has a wide frequency range from 1 nHz to 80 MHz and a sampling rate of 300 MSa/s. The housing is of high quality and offers non-slip feet for comfortable working. Different signal modulation methods, such as frequency modulation, phase modulation, amplitude modulation, pulse width modulation, frequency shift keying, are no longer a challenge with this device. The integrated measuring function also makes it possible to measure the frequency, period and duty cycle of external signals and display them on the screen in real time. The signal generator is very easy to operate with its intuitive key layout and high-resolution 3.5-inch colour LCD. Different settings can be saved in groups and thus recalled very quickly. In addition, the menu can be displayed in English, German and French. Features Modulation functions AM, FM, PM, ASK, FSK, PSK, PWM, Burst Sample rate 300 MSa/s Vertical wave resolution 14 bit Signal forms Lorentz pulse, pulse, half-wave, noise, exponential rise/fall, etc. Frequency rangesSineSquare, PulseTriangle, arbitraryTTL 1 nHz - 80 MHz1 nHz - 30 MHz1 nHz - 50 MHz1 nHz - 20 MHz Min. Frequency resolution 1 nHz Frequency accuracy ± 5 ppm Frequency stability ± 3 ppm / 1 year Permis. operation temp. 0 - 40°C Permis. operation humidity < 80% Permis. operation temp. 0 - 40°C Voltage / input 85 V - 264 VAC / 47 - 63 Hz Display 3.5' TFT colour LCD Connection BNC signal clips Dimensions 219 x 240 x 160 mm Scope of delivery JOY-iT PSG9080 signal generator 2x BNC signal clips Connection cable

    € 279,00

    Members € 251,10

  • Elektor 2 MHz LCR-meter Kit

    Eurocircuits Elektor 2 MHz LCR Meter Kit

    Out of stock

    Would you like to add an LCR Meter to your electronics workbench? Build your own! The Elektor 2 MHz LCR Meter Kit is an automatic impedance measuring bridge with extended functionality. Features Measures the resistance, capacitance and inductance of components with an impedance of 10 mΩ to 100 MΩ Test frequency from 50 Hz to 2 MHz Four possible test voltages (0.1, 0.2, 0.5 and 1 Vrms) Additional DC polarization up to 5 V for capacitors and 50 mA for inductors Two configurations possible: Standalone mode with main board + display extension Main board (without display) connected via USB to a computer running the user program (Windows, Linux, MacOS) Specifications Display Parameter valuesEquivalent circuitFrequencyImpedance ∣Z∣Phase ΦQ or DVoltage and current of DUTTest voltage (AC) and polarisation (DC)Range hold statusLabels for multi-function buttons Display size 4.1' (10.5 cm) | 240 x 128 dots Measurement range Parameter Value Inductance L 10 nH - 100 H Capacity C 1 pF - 100 mF Resistance R 10 mΩ - 100 MΩ Q 0 - 5000 for display Phase Φ -90° / +90° Test frequency 50 Hz to 2 MHz in 54 predefined stepsor any frequency within the range Accuracy Up to ± 0.1% ±1 of last digit Total current (MCU board + backlit display board) without polarization420 mA when polarizing DUTup to 650 mA Power supply 5 VDC/1 A USB A (not included)e.g. mobile phone mains charger PC software Windows, Linux, MacOS Dimensions (Hammond case) 6.5 x 4.2 x 2.1' (166 x 106 x 53 mm) Weight 1 kg All the necessary components are included for assembly and calibration: 2 populated PCBs (pushbuttons, rotary switch, and LCD)Note: Before shipping the operation of both assembled boards is carefully checked according to a protocol developed by the original designer Jean-Jacques Aubry. 4 BNC sockets (not assembled) 4 jumpers Hammond case drilled, machined, with printed front and side panels Kelvin cables with clips and 4 plugs Mini-USB / USB-A cable 24-way flat cable (15 cm) Aluminium button for rotary switch Full-color printed assembly manual (32 pages) Adjustment tool for trimmers Required tools Screwdriver, multimeter, and soldering iron. Time Total assembly and calibration time (depending on your skill): 60 to 90 minutes Downloads More downloads are available on the Elektor Labs platform. Elektor Jumpstarter This product is the result of a successful campaign on our electronics project support platform Elektor Jumpstarter. Readers and interested parties can submit their product ideas and, together with the Elektor development team, a finished product can be brought to market after extensive consideration and many tests. Note that these are always small series production runs, so the products are considered 'Elektor Collector Items'.

    Out of stock

    € 799,00

    Members € 719,10

  • Last stock! LabNation Logic Analyzer Cable for SmartScope

    LabNation LabNation Logic Analyzer Cable for SmartScope

    2 in stock

    LabNation’s multifunctional SmartScope is not only a full-featured oscilloscope, but also a Logic Analyzer for digital-signal capturing. Optimal results though are only achieved with the use of shielded cables. Exactly for this purpose LabNation has developed a high-quality shielded cable, which prevents interference.

    2 in stock

    € 34,95

    Members € 31,46

  • Peak Atlas DCA55 Semiconductor Analyser

    Peak Peak Atlas DCA55 Semiconductor Analyser

    The DCA55 is great for automatically identifying the type of semiconductor on the test leads as well as the pinout and many other parameters. Supports transistors MOSFETs, JFETs (gate pin only can be identified), diodes, LEDs and lots more. Automatically identifies type of component, pinout and other important parameters. Now features transistor leakage measurement and Germanium/Silicon identification. Component Support Bipolar transistors (NPN/PNP inc Silicon/Germanium) Darlington transistors (NPN/PNP) Enhancement mode MOSFETs (N-Ch and P-Ch) Depletion mode MOSFETs (N-Ch and P-Ch) Junction FETs (N-Ch and P-Ch). Only gate lead identified. Diodes and diode networks (2 and 3 lead types). LEDs and bi-colour LEDs (2 lead and 3 lead types). Low power sensitive Triacs and Thyristors (<5 mA trigger and hold) Measurements Part type identification Pinout identification BJT current gain (hFE) BJT base emitter voltage (Vbe) BJT collector leakage current MOSFET gate threshold voltage Diode forward voltage drop (Vf) Specifications Analyser type Transistors, Diodes, LEDs, MOSFETs, JFETs Pinout detection Full pinout (only Gate on JFETs) Pinout configuration Connect any way round Transistor measurements Vbe, hFE, Iceo MOSFET measurements Vgs(on) Diode measurements Vf Probe type Universal grabber type Battery Single AAA cell (supplied). Life typically 1300 ops Test conditions Typically 5 mA, 5 V peak Display type Alphanumeric LCD (with backlight) Included DCA55 Semiconductor Component Analyser instrument Comprehensive illustrated user guide Fitted universal hook probes AAA Alkaline battery Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (DE) User Guide (IT)

    € 59,95

    Members € 53,96

  • JOY-iT DPH5005 Programmable Buck & Boost Power Supply

    JOY-iT JOY-iT DPH5005 Programmable Buck & Boost Power Supply

    2 reviews

    The DPH5005 meets many requirements of a lab power supply. This power supply combines analog and digital technologies in an advanced design with outstanding precision and accuracy. The adjustable output reaches up to 50 V or 5 A and can be precisely configured in 10 mV or 1 mA steps. The power supply unit is additionally equipped with a switch-off parameter memory and ten programmable data memories. The operation of the unit has been optimized for particularly easy operation and the colour display offers particularly detailed and comprehensive information. Among other things, the current voltage and current values, presettings and output powers can be displayed here. Dynamic notification symbols also facilitate clarity. The additional settings menu offers maximum control of overcurrent and overvoltage values as well as other parameters. The DPH5005 offers modern design and advanced technology in a compact package, making it the ideal power supply. In addition, you can supplement the laboratory power supply with the optionally available housing. Specifications Display Type LCD Input Voltage 6-50 V (DC) Output Voltage 0-50 V Output Current 0-5 A Output Power 0-250 W Voltage Resaolution 0.01 V Current Resolution 0.001 A Special Features Programmable, slim Ripple 100 mVpp Size (Display Module) 43 x 79 x 38 mm Size (Power Module) 93 x 35 x 72 mm Display Size 1.5' (3.8 cm) Weight 202 g Items Shipped Display and power module, 2 connection wires Downloads Datasheet Manual PC Software / Android APK

    € 74,95

    Members € 67,46

  • Hioki DT4256 Digitale Multimeter

    Hioki Hioki DT4256 Multimeter

    1 review

    Multi-function DMM for a wide range of applications The multi-functional Hioki DT4256 provides voltage, current, resistance, capacitance, frequency, continuity check, and diode test functionality. It can also measure signals ranging from 4 to 20 mA and display results as a percentage. Multi-functional capability makes this DMM suitable for use in a broad range of measurement applications. Features ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics Measure up to 10 A with direct input Dual display lets you check voltage and frequency simultaneously Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms) USB communications function supports PC measurements (optional) Broad -25°C to 65°C (-13°F to 149°F) operating temperature range Specifications Measurement items DC voltage 600.0 mV to 1000 V AC voltage 6.000 V to 1000 V DCA current 60.00 mA to 10.00 A ACA current 600.0 mA to 10.00 A AC clamp 10.00 A to 1000 A Resistance 600.0 Ω to 60.00 MΩ Capacitance 1.000 μF to 10.00 mF Frequency 99.99 Hz to 99.99 kHz Continuity check Yes Diode check Yes Voltage check Yes AUTO AC/DCV Yes Basic characteristics Display count 6000 DCV basic accuracy 0.3% rdg. ±3 dgt. ACV bandwidth 1 kHz True RMS Yes Power supply 4x LR03 alkaline batteriesContinuous use: 130 hours (backlight OFF) Safety standard categories CAT III 1000V / CAT IV 600V Additional functions Back light Yes Drop proof Yes Max/Min/Avg display Yes From 4 to 20 mA Percentage conversion display Yes Fuse at voltage terminal Yes General Dimensions (W x H x D) 84 x 174 x 52 mm (3.31 x 6.85 x 2.05') Weight 390 g (including batteries and holster) Downloads Manual (English) Manual (Spanish) Software

    € 209,00

    Members € 188,10

  • JOY-iT AT34 USB Multimeter

    JOY-iT JOY-iT AT34 USB Multimeter

    Screen 0.96' IPS Display Refresh Rate 2 Hz Interface USB 3.0 (2.0 compatible) Quick Charge Recognition QC2.0, QC3.0, Apple 2.4 A /2.1 A / 1 A / 0.5 A, Android DCP, Samsung Voltage Measurement Range 3.7 V - 30 V Voltage Resolution 0.01 V Voltage Accuracy ±0,8 % (+4 digits) Current Measurement Range 0 A - 4 A Current Resolution 0.001 A Current Accuracy ±1 % (+4 digits) Power Measurement Range 0 W - 120 W Capacity Accumulation Range 0 mAh - 99999 mAh Energy Accumulation Range 0 Wh - 999,99 Wh Load Impedance Range 1 Ω - 9999.9 Ω Temperature Measurement Range 0 °C - 80 °C Operating Temperature Range 0 °C - 45 °C Temperature Measurement Error ± 3 °C Dimensions 64 mm x 22 mm x 12mm Weight 28 g

    € 17,50

    Members € 15,75

  • OWON XDM2041 Digital Multimeter

    OWON OWON XDM2041 Multimeter

    The OWON XDM2041 is an extremely low-cost, high-precision benchtop multimeter. The meter has a True RMS function to measure the AC voltage and current and it has a reading speed of up to 65 values per second. Also, the XDM2041 is equipped with functions such as measuring 2-wire and 4-wire resistance.The XDM2041 is able to store data internally in the memory of the meter and display it on the 3.7' high-resolution LCD display. Up to 1000 points can be stored and the time interval can be varied from 15ms to 9999s. By means of the RS232 port on the back of the device, the meter can be programmed and controlled via SCPI.Specifications Measuring Properties Measurement Range Precision DC voltage 0.001 mV - 1000 V ±0.1%±10 True RMS Voltage AC 1 mV - 750 V ±2.0%±0.10 Current DC 0.01 µA - 10 A ±0.15%±20 True RMS Current AC 1 µA - 10 A ±0.5%±20 Resistance 0.01 Ω - 5 MΩ ±0.1%±10 Capacity 1 nF - 50mF ±2.5%±5 Frequency 0.001 Hz - 60 MHz ±0.2%±8 Diode Test 1000 Ω Temperature Thermocouple Other functionality Max, Min, Average, REL_%, dBm/dB, Pass/Fail, Table Data logger function Duration: 5 ms - 9999sLength: 1 kPts Digits 4 ⅘ digits Display 3.7' LCD Connectivity RS232 Dimensions 235 mm x 110 mm x 295 mm Weight 3.06 kg For more information, check out the User Manual here.You can find the PC software here.

    € 154,95

    Members € 139,46

  • Peak LCR45 LCR- en impedantiemeter

    Peak Peak Atlas LCR45 - LCR Meter with LCR Impedance Measurement

    The LCR45 does everything that the popular LCR40 does, but it has some significant enhancements. The LCR45 features a new high capacity micro and high resolution ADCs. LCR45 incorporates advanced maths, based on Complex Impedance analysis. This allows for enhanced component value measurement as well as a comprehensive and detailed impedance display. Features Supplied with gold plated removable hook probes. Fluid measurements with hold function. Automatic or manual component type. Automatic or manual test frequency, DC, 1 kHz, 15 kHz or 200 kHz. Enhanced measurement resolution: 0.2 µH, 0.2 pF and 0.2 Ohms. Easy menu system for user settings. Enhanced compensation for component parasitics and losses (such as core losses etc). Automatic or manual power-off. Specifications Analyser type LCR and component impedance Component types Auto/Manual for L,C & R Measurement types Inductance, Capacitance and Resistance Other measurements Complex impedance/admittance More measurements Magnitude and Phase of impedance Inductance range 0uH to 2H Capacitance range 0 pF to 10000 uF Resistance range 0R to 2MR Test frequency Auto and manual: DC, 1 kHz, 15 kHz, 200 kHz Display type Alphanumeric LCD (not backlit) Measurement scheme Continuous (with optional hold) Battery GP23 (12 V/55 mAH type), ~700 ops Included LCR45 Passive Component Impedance Meter 2 mm plugs and sockets and removeable hook probes Comprehensive illustrated user guide 2 Batteries, one installed and one spare. GP23 Alkaline battery. (12 V/55 mAH) Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (IT)

    € 109,95

    Members € 98,96

  • Last stock! FNIRSI S1 Smart Multimeter

    FNIRSI FNIRSI S1 Smart Multimeter

    1 in stock

    The FNIRSI S1 portable digital multimeter can accurately measure AC/DC voltage, resistance, NCV, diode, continuity, capacitance, temperature, frequency and live wire. It is a really useful tool for solving electrical issues in industry and the home. It is suitable for household sockets, fuses, batteries (including vehicles), troubleshooting automotive circuits, charging systems, testing electronics in cars, etc. Smart Multimeter The multimeter can automatically detect AC/DC voltage, resistance and continuity, which is suitable for both beginners and professionals. Specifications AC voltage 0~1000 V ±(0.8% +3) DC voltage 0~1000 V ±(0.8% +3) Resistance 0~100 MΩ ±(1.2% +3) Capacitance 0 nF~10 mF ±(4.5% +5) Frequency 0 Hz~10 Mhz ±(0.1% +3) Temperature −20~1000°C ±(2% +5) Diode Yes Automatic OFF Yes Lighting Yes On-off buzzer Yes Auto range Yes NCV induced voltage Yes Live mode Yes Data hold Yes Analog Yes Low voltage indication Yes Max range 9999 counts Valid value 50 Hz~1 kHz Material ABS Display VA color screen Power supply via USB-C (1000 mA rechargeable lithium battery) Dimensions 143 x 75 x 19 mm Weight 135 g Included FNIRSI S1 Multimeter Tip table pen Temperature probe USB cable Manual Downloads Manual

    1 in stock

    € 34,95

    Members € 31,46

  • Atlas ESR70 Plus – ESR Tester

    Peak Peak Atlas ESR70 Gold - Low Resistance and Capacitance Meter

    The Peak Atlas ESR70 Gold is an enhanced version of the previous Peak Atlas ESR70 Plus. It does everything that the ESR70 Plus did but better. It now measures capacitance up to 10x faster, and over a wider range, thanks to new test algorithms. The capacitance measurement is also much less influenced by parallel resistances or leakage current thanks to our new Triple-Slope measurement system. Using the supplied gold plated probes (removable), the Atlas ESR70 Gold can measure ESR down to a resolution of 0.01 ohms, up to 40 ohms. It can even measure ESR for capacitors that are in-circuit. Probes are removable, allowing 2 mm compatible probes to be fitted. Audible alerts are produced for various ESR levels allowing you to perform many tests in succession without having to look at the display. The ESR70 automatically takes capacitive reactance into account, so even low value capacitors (down to 0.3 uF) can have the ESR measured accurately. Features Uses a single AAA Alkaline cell (included). Alphanumeric LCD with backlight. Automatic analysis-start when you apply the probes. Automatic capacitor discharge using controlled discharge function. ESR (and low DC resistance) measurement (even in-circuit). Capacitive reactance automatically taken into account to ensure accurate ESR. Capacitance measurement (if testing out-of-circuit). Audible alerts for various ESR levels. Extended ESR measurement range up to 40 Ohms. Optional probe alternatives easily fitted. New Gold Features Improved LCD with better backlight. 10x faster capacitance measurement for large capacitors. Enhanced user options system. New triple-slope measurement system to vastly reduce the influence of parallel resistance and/or leakage current on capacitance measurements. Much wider capacitance measurement range now 0.3 uF to 90,000 uF (was 1uF to 22,000uF). Specifications Analyser type ESR and Capacitance Component types Capacitors (>0.3 uF) ESR range 0.00 Ohms to 40.0 Ohms ESR resolution From 0.01 Ohms In-circuit use ESR only Capacitance range 0.3 uF to 90000 uF Battery type 1.5 V Alkaline AAA Cell (supplied). Life typically 1500 ops Display type Alphanumeric LCD (with backlight) Included ESR70 Equivalent Series Resistance Meter Extra-long and extra-flexible test cables (450 mm of Silicone covered cable) 2 mm gold plated plugs and sockets with removeable gold plated crocodile clips Comprehensive illustrated user guide AAA Alkaline cell Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (IT)

    € 99,95

    Members € 89,96

  •  -17% FNIRSI SG-003A Signal Generator

    FNIRSI FNIRSI SG-003A Signal Generator

    The FNIRSI SG-003A Multi-Functional Signal Generator a.k.a. Process Meter/Calibrator is a high-precision voltage/current generator and meter. The SG-003A provides highly accurate reference voltages or currents for testing and calibrating other measurement instruments like multimeters and oscilloscopes. Besides voltages and currents, the SG-003A also generates rectangular pulse signals with precisely programmable frequencies and duty cycles. Its converter mode turns the SG-003A into a precision voltage-controlled current source, or current-controlled voltage source, and even a voltage- or current-controlled frequency generator. The SG-003A is a great tool for checking your multimeter’s accuracy and precision, and for testing e.g. LEDs. Features Accuracy (voltage/current) 0.1% ±0.005 Resolution (current) 0.01 mA Frequency 0-10 kHz Resolution 5 digits Output power 24 V Display 2.4' TFT LCD (320 x 240) Dimensions 92 x 72 x 30 mm Weight 165 g Specifications Signal Range Precision Resolution Max load External power supply Active current output 0~24 mA ±(0.1% + 0.005) 0.01 mA 750 Ω Passive current output (XMT) 0~24 mA ±(0.1% + 0.005) 0.01 mA 0~30 V Voltage output 0~24 V ±(0.1% + 0.005) 0.01 V 24 V loop 0~24 mA ±(0.1% + 0.005) 0.01 mA Frequency output 0~9999 Hz ±2% 5 digits Current input 0~24 mA ±(0.1% + 0.005) 0.01 mA Voltage input 0~30 V ±(0.1% + 0.005) 0.01 V Included 1x FNIRSI SG-003A signal generator 4x Test clips 1x USB charger 1x USB-C cable 1x Manual Downloads Manual

    € 89,95€ 74,95

    Members identical

  • USB Logic Analyzer (8-ch, 24 MHz)

    USB Logic Analyzer (8-ch, 24 MHz)

    This USB Logic Analyzer is an 8-channel logic analyzer with each input dual purposed for analog data recording. It is perfect for debugging and analyzing signals like I²C, UART, SPI, CAN and 1-Wire. It operates by sampling a digital input connected to a device under test (DUT) at a high sample rate. The connection to the PC is via USB. Specifications Channels 8 digital channels Maximum sampling rate 24 MHz Maximum input voltage 0 V ~ 5 V Operating temperature 0°C ~ 70°C Input impedance 1 MΩ || 10 pF Supported protocols I²C, SPI, UART, CAN, 1-Wire, etc. PC connection USB Dimensions 55 x 28 x 14 mm Included USB Logic Analyzer (8-ch, 24 MHz) USB Cable Jumper Wire Ribbon Cable Downloads Software

    € 12,95

    Members € 11,66

  • Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    Sensepeek Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.The dual pin header connector fits directly on a 2.54 mm (0.100”) connector.The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.Included 4x PCBite holder 1x Large base plate (A4) 4x PCBite probe with pin tipped test needle 4x Extra crown tipped test needle 1x Set of yellow insulation washers 5x Dupont to dupont test wire 2x Banana to dupont test wire 1x Microfiber cloth DownloadsUser Guide

    € 144,95

    Members € 130,46

  • Peak Atlas ZEN50 Zener Diode Analyser

    Peak Peak Atlas ZEN50 Zener Diode Analyser

    The Atlas ZEN is ideal for testing Zener diodes (including avalanche diodes), transient suppressors, LEDs and LED strings. It generates constant current pulses (selectable from 2 mA, 5 mA, 10 mA and 15 mA) at voltages from 0V to 50V. So even high voltage Zeners or high voltage LED strings can be tested. Test currents are supplied in narrow pulses to ensure that the component under test remains at a constant temperature. The voltage of the part is displayed on the screen together with the test current and also a measure of the component's slope resistance (also known as dynamic impedance). Specifications Analyser type Zeners, LEDs, TVS etc Test currents 2 mA, 5 mA, 10 mA, 15 mA Voltage range 0.00 to 50.00 V Slope resistance range 0 to 8000 Ohms Battery type Single AAA (supplied). Life typically 1400 ops Test method Triple pulse burst @ 10pps (typ) Test current duty cycle 3% Display type Alphanumeric LCD (with backlight) Included ZEN50 Instrument Fitted flexible test leads with gold plated crocs Comprehensive illustrated user guide AAA Alkaline battery Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (DE) User Guide (IT)

    € 69,95

    Members € 62,96

  • OWON HDS272S 2-kanaals oscilloscoop (70 Mhz) + Multimeter + Signaalgenerator

    OWON OWON HDS272S 2-ch Oscilloscope (70 MHz) + Multimeter + Signal Generator

    The OWON HDS272S is the perfect solution all-in-one solution! Oscilloscope, multimeter and waveform generator in the same battery-powered device, to work on the go. Features Oscilloscope + multimeter + waveform generator, multifunction in one 3.5-inch high-resolution, high-contrast colour LCD display, suitable for outdoor use 18650 lithium battery, comprehensive power consumption ≤3 W, can work continuously for about 6 hours USB Type-C interface, support power bank, support PC software connection Self-calibration function SCPI supported, facilitate secondary development Specifications Oscilloscope Bandwidth 70 MHz Channels 2-ch Oscilloscope + 1-ch Generator Sample Rate 250 MSa/s Acquisition Model Normal, Peak detect Record Length 8K Display 3.5-inch LCD Waveform Refresh Rate 10,000 wfrms/s Input Coupling DC, AC, and Ground Input Impedance 1 MΩ ±2%, in parallel with 16pF±10pF Probe Attenuation Factors 1X,10X,100X,1000X,10000X Max. input Voltage 400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation) Bandwidth Limit (typical) 20 MHz Horizontal Scale 5 ns/div - 1000 s/div, step by 1 - 2 - 5 Vertical Sensitivity 10 mV/div - 10 V/div Vertical Resolution 8 bits Trigger Type Edge Trigger Modes Auto, Normal, single Automatic Measurement Period, Frequency, Mean, PK-PK, Max, Min Cursor Measurement ΔV, ΔT, ΔT& ΔV between cursors Communication Interface USB Type-C Multimeter Max. Resolution 20,000 counts Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test Input Impedance 10 MΩ Max Input Voltage AC: 750 V | DC: 1000 V Max Input Current DC: 10 A | AC: 10 A Diode 0-2 V Waveform Generator Frequency Output Sine 0.1 Hz - 25 MHz Square 0.1 Hz - 5 MHz Ramp 0.1 Hz - 1 MHz Pulse 0.1 Hz - 5 MHz Arbitrary 0.1 Hz - 5 MHz Sampling Rate 125 MSa/s Channel 1-ch Amplitude Range 20 mVpp - 5 Vpp Waveform Length 8K Vertical Resolution 14 bits Output Impedance 50Ω Downloads User Manual for HDS200 Series SCPI Protocol for HDS200 Series Quick Guide for HDS200 Series PC Software for OWON HDS200 Series

    € 229,00

    Members € 206,10

  • Last stock! JOY-iT HD35 USB Load Resistor (35 W)

    JOY-iT JOY-iT HD35 USB Load Resistor (35 W)

    2 in stock

    The HD35 offers you a compact electronic USB-load-resistor with a performance capability up to 35 Watt. The present current can be easily read on the LCD-Display. Moreover, the device has an adjustable trimmer and is because of this capable of simulating different charging electronics like QC2.0, QC3.0, FCP and AFC 9V. The maximal voltage is up tp 25 V and the maximal current is up to 5 A. This is the reason that it is suitable for nearly every area of application. The built-in cooling component in connection with the temperature controlled fan unit is very effective in cooling down the complete device. With the help of the integrated button it is possible to activate or deactivate the configurated load very fast. Features USB Load Resistor up to 35 W Adjustable via built-in trimmer LCD display of actual current strength Buttons for switching the load on/off Simulation of different charging electronics: QC2.0 (5 V, 9 V, 20 V), QC3.0, FCP, AFC 9V Technical Details Operating Voltage 4 V - 25 V Operating Current 0.25 A - 5 A Power 35 W Measuring Temperature Range -10 °C - 40 °C Display 4 Digit Segment Display Display Color Red Fan Speed 8000 RPM ± 10% | Temperature-controlled Connections USB 2.0, MicroUSB, USB Type-C Dimensions 84 mm x 41 mm x 28 mm Weight 52 g

    2 in stock

    € 24,95

    Members € 22,46

  • JYE Tech DSO138mini Oscilloscope DIY Kit incl. BNC Probe & Enclosure

    JYE Tech JYE Tech DSO138mini Oscilloscope DIY Kit incl. BNC Probe & Enclosure

    Features USB or battery powered External trigger input Built-in 1KHz/3.3V test signal Waveform frozen (HOLD) function available Save/recall waveform Serial waveform data output Specifications Number of Channel 1 Analog Bandwidth 0 - 200 kHz Sensitivity 10 mV/Div - 5 V/Div Sensitivity error < 5% Resolution 12-bit Input Impedance 1 MΩ Maximum Input Voltage 50 Vpk Coupling DC, AC, GND Max Real-time Sampling Rate 1 Msps Timebase 10 us/Div - 500 s/Div Record Length 1024 Trigger Modes Auto, Normal, Single Trigger Types Rising / falling edge Trigger Position 1/2 of buffer size fixed Display 2.4-inch color TFT LCD with 320 x 240 resolution Power Supply 3.5 V - 6 V DC Supply Current 120 mA @ 5 V Dimension 85 x 75 x 15 mm Weight 50 g Note Power supply is not included. The user needs to prepare a USB cable with micro-USB style plug to run the oscilloscope. Any USB port with higher than 150 mA current capacity can be used as a power source for the oscilloscope. Included 1x DSO138mini kit with all SMD parts pre-soldered 1x User Manual Downloads Manual Enclosure Assembly Firmware

    € 42,95

    Members € 38,66

  • PeakTech 6227 DC Switching Power Supply (0-60 V, 0-6 A) with colour LCD & 2x USB

    PeakTech PeakTech 6227 DC Switching Power Supply (0-60 V, 0-6 A) with colour LCD & 2x USB

    3 in stock

    This laboratory power supply offers a controllable 0...60 V or 0...6 A DC main output with a maximum continuous power of 150 W. For developers, this laboratory power supply offers two switchable USB outputs with their own LCD display with voltage and current values.If you use a load up to 2.5 A, you can set the output voltage up to 60 V. If you want to use a higher current up to 6 A, set the load to a maximum of 25 V. Of course, all stages are also adjustable in between, e.g. 30 V/5 A, 40 V/3.7 A or 50 V/3 A.The current and voltage setting also can be done when the output is switched off. By pressing the knob for current or voltage, the setting resolution can be fine/coarse switched from 1 mA to 100 mA or 10 mV to 1 V.Due to the high range of functions and the simple operation with the best price-performance ratio, this laboratory power supply is ideal for the education, hobby, development and service sector. Blue LCD display showing the output voltage and current values Green LCD display showing the USB output voltage and current values 150 W constant output power Adjustable voltage range: 0~60 V at 0~2.5 A and 0~25 V at 2.5~6 A Voltage and current pre-selection with switchable output C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load Protection against short circuit, overload and overtemperature Accessories: Power cable, Connection Leads and Manual Output Voltage 0 ~ 60 V DC (@2,5 A) Output Current 0 ~ 6 A DC (@ 25 V) Output Power 150 W Display Resolution (V) 10 mV Display Resolution (A) 1 mA Setting Resolution (V) 10 mV / 1 V switchable Setting Resolution (A) 1 mA / 100 mA switchable Ripple & noise ≤ 5 mV RMS; ≤ 20 mA RMS Load regulation ≤ 0.05% + 5 mV, ≤ 0.5% + 5 mA Line regulation ≤ 0.1% + 3 mV, ≤ 0.2% + 3 mA Display accuracy +/- 0,5% + 5 dgt. Protection Overload, overtemperature, short circuit Operating voltage 115 / 240 V AC; 50/60 Hz Dimensions (WxHxD) 80 x 160 x 260 mm Weight 1.6 kg

    3 in stock

    € 129,95

    Members € 116,96

  • Great Scott Gadgets Opera Cake – Antenneschakelaar voor HackRF One

    Great Scott Gadgets Great Scott Gadgets Opera Cake - Antenna Switch for HackRF One

    Opera Cake is an antenna switching add-on board for HackRF One that is configured with command-line software either manually, or for automated port switching based on frequency or time. It has two primary ports, each connected to any of eight secondary ports, and is optimized for use as a pair of 1x4 switches or as a single 1x8 switch. Its recommended frequency range is 1 MHz to 4 GHz. When HackRF One is used to transmit, Opera Cake can automatically route its output to the appropriate transmit antennas, as well as any external filters, amplifiers, etc. No changes are needed to the existing SDR software, but full control from the host is available. Opera Cake also enhances the HackRF One’s use as a spectrum analyzer across its entire operating frequency range of 1 MHz to 4 GHz. Antenna switching works with the existing hackrf_sweep feature, which can sweep the whole tuning range in less than a second. Automatic switching mid-sweep enables the use of multiple antennas when sweeping a wide frequency range. Downloads Documentation GitHub

    € 199,95

    Members € 179,96

  • Last stock! Siglent SDL1020X-E Programmable DC Electronic Load (200 W)

    Siglent Siglent SDL1020X-E Programmable DC Electronic Load (200 W)

    2 in stock

    The Siglent SDL1020X-E DC Load leads with measurement resolution of 0.1 mV/0.1 mA and the base SDL1000X-E series resolution is 1 mV/1 mA and adjustable current rise times from 0.001 A/μs~2.5 A/μs. For remote communication and control, the SDL series includes S232/USB/LAN interface types. The SDL1020X-E delivers stability over a wide range of applications and can meet all kinds of testing requirements. including: Power, battery/handheld device design, industry, LED lighting, automotive electronics, and aerospace. Features SDL1020X-E (Single channel): DC 150 V/30 A, total power 200 W 4 static modes / Dynamic mode: CC/CV/CR/CP CC Dynamic mode: Continuous, pulsed, toggled CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode: 0.5 Hz Measuring speed of voltage and current: up to 500 kHz Adjustable current rise time range: 0.001 A/us~2.5 A/us Min. readback resolution: 0.1 mV, 0.1 mA Short-circuit, Battery test, CR-LED mode, and factory test functions 4-wire SENSE compensation mode function List function supports editing as many as 100 steps Program function supports 50 groups of steps OCP, OVP, OPP, OTP and LRV protection External analog control Voltage, Current monitoring via 0-10 V 3.5 inch TFT-LCD display, capable of displaying multiple parameters and states simultaneously Built-in RS232/USB/LAN communication interface, USB-GPIB module (optional) Waveform trend chart and easy-to-use file storage and call functions Includes PC software: Supports SCPI, LabView driver Included 1x Siglent SDL1020X-E DC Programmable Load 1x Quick start guide 1x Guarantee Card 1x Power Cord 1x USB Cable

    2 in stock

    € 529,00

    Members € 476,10

  • QuantAsylum QA403 24-bit Audio Analyzer

    QuantAsylum QuantAsylum QA403 24-bit Audio Analyzer

    Out of stock

    The QA403 is QuantAsylum's fourth-generation audio analyzer. The QA403 extends the functionality of the QA402 with improved noise and distortion performance, in addition to a flatter response at band edges. The compact size of the QA403 means you can take it just about anywhere. Features 24-bit ADC/DAC Up to 192 kSPS Fully isolated from PC Differential Input/Output USB powered Built-in Attenuator Fast Bootup and Driverless The QA403 is a driverless USB device, meaning it’s ready as soon as you plug it in. The software is free and it is quick and easy to move the hardware from one machine to the next. So, if you need to head to the factory to troubleshoot a problem or take the QA403 home for a work-from-home day, you can do it without hassle. No-Cal Design The QA403 comes with a factory calibration in its flash memory, ensuring consistent unit-to-unit performance. On your manufacturing line you can install another QA403 and be confident what you read on one unit will be very similar to the next unit. It is not expected that re-calibration will be required at regular intervals. Measurements Making basic measurements is quick and easy. In a few clicks you will understand the frequency response, THD(+N), gain, SNR and more of your device-under test. Dynamic Range The QA403 offers 8 gain ranges on the input (0 to +42 dBV in 6 steps), and 4 gain ranges on the output (-12 to +18 dBV in 10 dB steps). This ensures consistent performance over very wide ranges of input and output levels. The maximum AC input to the QA403 is +32 dBV = 40 Vrms. The maximum DC is ±40 V, and the maximum ACPEAK + DC = ±56 V. Easy Programmability The QA403 supports a REST interface, making it easy to automate measurements in just about any language you might anticipate. From Python to C++ to Visual Basic—if you know how to load a web page in your favorite language, you can control the QA403 remotely. Measurements are fast and responsive, usually with dozens of commands being processed per second. Isolated and USB Powered The QA403 is isolated from the PC, meaning you are measuring your DUT and not chasing some phantom ground loop. The QA403 is USB powered, like nearly all our instruments. If you are setting up remotely, throw a powered hub in your bag and your entire test setup can be running with a minimum of cables. Goodbye Soundcard, Hello QA403 Tired of trying to make a soundcard work? The calibration nightmare? The lack of gain stages? The limited drive? Are you tired of dealing with the fixed input ranges? The worry that you might destroy it with too much DC or AC? Tired of the ground loops? That’s why QuantAsylum built the QA403. Specifications Dimensions 177 x 44 x 97 mm (W x H x D) Weight 435 g Case Material Powder-coating Aluminum (2 mm thick front panel, 1.6 mm thick top/bottom) Downloads Datasheet User Manual GitHub

    Out of stock

    € 799,00

    Members € 719,10

  • PeakTech 8200 Measuring Accessories Set

    PeakTech PeakTech 8200 Measuring Accessories Set

    3 in stock

    This comprehensive collection of test accessories for the electronics area ensure the best suitable measuring adapter for the desired application for each digital multimeter. All clips and cables are manufactured to the latest safety standards and provide a safe implementation in every application for the user. The material used is a flexible and non-slip plastic that can endure the harshest kind of usage. Included in the set: PeakTech 7010 2 x Tapping clamps (red/black) 5 A with round-hook PeakTech 7015 2 x Safety Alligator Clips 10 A (red/black) PeakTech 7020 4 x 4 mm Safety Connection Leads (red/black) PeakTech 7025 2 x 4 mm Safety Connection Leads with Connector (red/black) TKS-8 Test Leads with 2mm Probe Tip and sleeves PeakTech TF-50 Temperature Bead Probe -40 … +204°C PeakTech TF-55 Universal- Temperature Probe -50...+300°C

    3 in stock

    € 54,95

    Members € 49,46

  • Pokit Meter – Portable Multimeter, Oscilloscope and Logger

    Pokit Meter - Portable Multimeter, Oscilloscope and Logger

    Pokit Meter is a revolutionary tool in the measurement industry. Its incredibly small size means you can put it on a keychain or in your pocket for unprecedented portability. Free yourself from the bench and take your creativity to new places! Pokit Meter harnesses the power of your smartphone, transforming it into an awesome measurement tool. The Pokit App measures a wide range of parameters, including voltage, current, resistance and temperature. It also provides continuity and a diode checker. Pokit Meter is ideal for low voltage electronics, automotive applications, home automation, and much more. Super Handy Retractable Leads: All-in-one multimeter, oscilloscope (one-time) and logger Highly Portable, it Fits in Your Pocket: Fits on your keychain so you can take it anywhere Wireless Connectivity: Connects to your phone via Bluetooth 60 V DC/42 V AC, 2 A Ultra-low Power and Long Battery Life: Suitable for low voltage electronics work (Arduino, Raspberry Pi), automotive applications etc. Full-Featured Multimeter Pokit Meter is a full-featured multimeter. The app brings all your favourite measurement modes into one seamless display. No knobs, no loose and bulky leads. Perfect for use in the home or on the go! True RMS measurement Auto ranging Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% Resistance: 1 to 1M Ohm, ±5% Ambient temperature: 0°C to 60°C, ±1°C Continuity and diode polarity checker Digital Storage Oscilloscope An oscilloscope that small? Never before has this much freedom been brought to your fingertips in the realm of electronic test equipment. Pokit Meter’s oscilloscope captures detailed voltage and current waveforms for real-time display on your smartphone. Simply pinch and drag to zoom and pan. Long-press on the graph to set cursors and trace your signals. Pokit Meter also functions as a spectrum analyser. Switch into DFT mode to view your waveforms in the frequency domain. Sampling: 1 Msample/sec, 12-bit Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% 1mS to 10s acquisition window Auto trigger or adjustable rising/falling trigger level Monitor Parameters Long Term Pokit Meter functions as a stand-alone data logger. It logs temperature, voltage, or current waveforms for periods of up to six months, without connection to a phone. Pokit Meter’s compact nature means it can be placed in tight or hard-to-reach spaces. Simply hook up your Pokit and walk away! 12-bit sampling Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% 1 to 8000 points memory Up to 6 months logging

    € 139,95

    Members € 125,96


Forgot password?

Don't have an account yet?
Create an account