Test & Measurement

The FNIRSI SG-003A Multi-Functional Signal Generator a.k.a. Process Meter/Calibrator is a high-precision voltage/current generator and meter. The SG-003A provides highly accurate reference voltages or currents for testing and calibrating other measurement instruments like multimeters and oscilloscopes. Besides voltages and currents, the SG-003A also generates rectangular pulse signals with precisely programmable frequencies and duty cycles. Its converter mode turns the SG-003A into a precision voltage-controlled current source, or current-controlled voltage source, and even a voltage- or current-controlled frequency generator. The SG-003A is a great tool for checking your multimeter’s accuracy and precision, and for testing e.g. LEDs. Features Accuracy (voltage/current) 0.1% ±0.005 Resolution (current) 0.01 mA Frequency 0-10 kHz Resolution 5 digits Output power 24 V Display 2.4' TFT LCD (320 x 240) Dimensions 92 x 72 x 30 mm Weight 165 g Specifications Signal Range Precision Resolution Max load External power supply Active current output 0~24 mA ±(0.1% + 0.005) 0.01 mA 750 Ω Passive current output (XMT) 0~24 mA ±(0.1% + 0.005) 0.01 mA 0~30 V Voltage output 0~24 V ±(0.1% + 0.005) 0.01 V 24 V loop 0~24 mA ±(0.1% + 0.005) 0.01 mA Frequency output 0~9999 Hz ±2% 5 digits Current input 0~24 mA ±(0.1% + 0.005) 0.01 mA Voltage input 0~30 V ±(0.1% + 0.005) 0.01 V Included 1x FNIRSI SG-003A signal generator 4x Test clips 1x USB charger 1x USB-C cable 1x Manual Downloads Manual

Read more less

The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.The dual pin header connector fits directly on a 2.54 mm (0.100”) connector.The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.Included 4x PCBite holder 1x Large base plate (A4) 4x PCBite probe with pin tipped test needle 4x Extra crown tipped test needle 1x Set of yellow insulation washers 5x Dupont to dupont test wire 2x Banana to dupont test wire 1x Microfiber cloth DownloadsUser Guide

Read more less

The OWON HDS272S is the perfect solution all-in-one solution! Oscilloscope, multimeter and waveform generator in the same battery-powered device, to work on the go. Features Oscilloscope + multimeter + waveform generator, multifunction in one 3.5-inch high-resolution, high-contrast colour LCD display, suitable for outdoor use 18650 lithium battery, comprehensive power consumption ≤3 W, can work continuously for about 6 hours USB Type-C interface, support power bank, support PC software connection Self-calibration function SCPI supported, facilitate secondary development Specifications Oscilloscope Bandwidth 70 MHz Channels 2-ch Oscilloscope + 1-ch Generator Sample Rate 250 MSa/s Acquisition Model Normal, Peak detect Record Length 8K Display 3.5-inch LCD Waveform Refresh Rate 10,000 wfrms/s Input Coupling DC, AC, and Ground Input Impedance 1 MΩ ±2%, in parallel with 16pF±10pF Probe Attenuation Factors 1X,10X,100X,1000X,10000X Max. input Voltage 400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation) Bandwidth Limit (typical) 20 MHz Horizontal Scale 5 ns/div - 1000 s/div, step by 1 - 2 - 5 Vertical Sensitivity 10 mV/div - 10 V/div Vertical Resolution 8 bits Trigger Type Edge Trigger Modes Auto, Normal, single Automatic Measurement Period, Frequency, Mean, PK-PK, Max, Min Cursor Measurement ΔV, ΔT, ΔT& ΔV between cursors Communication Interface USB Type-C Multimeter Max. Resolution 20,000 counts Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test Input Impedance 10 MΩ Max Input Voltage AC: 750 V | DC: 1000 V Max Input Current DC: 10 A | AC: 10 A Diode 0-2 V Waveform Generator Frequency Output Sine 0.1 Hz - 25 MHz Square 0.1 Hz - 5 MHz Ramp 0.1 Hz - 1 MHz Pulse 0.1 Hz - 5 MHz Arbitrary 0.1 Hz - 5 MHz Sampling Rate 125 MSa/s Channel 1-ch Amplitude Range 20 mVpp - 5 Vpp Waveform Length 8K Vertical Resolution 14 bits Output Impedance 50Ω Downloads User Manual for HDS200 Series SCPI Protocol for HDS200 Series Quick Guide for HDS200 Series PC Software for OWON HDS200 Series

Read more less

The QA403 is QuantAsylum's fourth-generation audio analyzer. The QA403 extends the functionality of the QA402 with improved noise and distortion performance, in addition to a flatter response at band edges. The compact size of the QA403 means you can take it just about anywhere. Features 24-bit ADC/DAC Up to 192 kSPS Fully isolated from PC Differential Input/Output USB powered Built-in Attenuator Fast Bootup and Driverless The QA403 is a driverless USB device, meaning it’s ready as soon as you plug it in. The software is free and it is quick and easy to move the hardware from one machine to the next. So, if you need to head to the factory to troubleshoot a problem or take the QA403 home for a work-from-home day, you can do it without hassle. No-Cal Design The QA403 comes with a factory calibration in its flash memory, ensuring consistent unit-to-unit performance. On your manufacturing line you can install another QA403 and be confident what you read on one unit will be very similar to the next unit. It is not expected that re-calibration will be required at regular intervals. Measurements Making basic measurements is quick and easy. In a few clicks you will understand the frequency response, THD(+N), gain, SNR and more of your device-under test. Dynamic Range The QA403 offers 8 gain ranges on the input (0 to +42 dBV in 6 steps), and 4 gain ranges on the output (-12 to +18 dBV in 10 dB steps). This ensures consistent performance over very wide ranges of input and output levels. The maximum AC input to the QA403 is +32 dBV = 40 Vrms. The maximum DC is ±40 V, and the maximum ACPEAK + DC = ±56 V. Easy Programmability The QA403 supports a REST interface, making it easy to automate measurements in just about any language you might anticipate. From Python to C++ to Visual Basic—if you know how to load a web page in your favorite language, you can control the QA403 remotely. Measurements are fast and responsive, usually with dozens of commands being processed per second. Isolated and USB Powered The QA403 is isolated from the PC, meaning you are measuring your DUT and not chasing some phantom ground loop. The QA403 is USB powered, like nearly all our instruments. If you are setting up remotely, throw a powered hub in your bag and your entire test setup can be running with a minimum of cables. Goodbye Soundcard, Hello QA403 Tired of trying to make a soundcard work? The calibration nightmare? The lack of gain stages? The limited drive? Are you tired of dealing with the fixed input ranges? The worry that you might destroy it with too much DC or AC? Tired of the ground loops? That’s why QuantAsylum built the QA403. Specifications Dimensions 177 x 44 x 97 mm (W x H x D) Weight 435 g Case Material Powder-coating Aluminum (2 mm thick front panel, 1.6 mm thick top/bottom) Downloads Datasheet User Manual GitHub

Read more less

The HD35 offers you a compact electronic USB-load-resistor with a performance capability up to 35 Watt. The present current can be easily read on the LCD-Display. Moreover, the device has an adjustable trimmer and is because of this capable of simulating different charging electronics like QC2.0, QC3.0, FCP and AFC 9V. The maximal voltage is up tp 25 V and the maximal current is up to 5 A. This is the reason that it is suitable for nearly every area of application. The built-in cooling component in connection with the temperature controlled fan unit is very effective in cooling down the complete device. With the help of the integrated button it is possible to activate or deactivate the configurated load very fast. Features USB Load Resistor up to 35 W Adjustable via built-in trimmer LCD display of actual current strength Buttons for switching the load on/off Simulation of different charging electronics: QC2.0 (5 V, 9 V, 20 V), QC3.0, FCP, AFC 9V Technical Details Operating Voltage 4 V - 25 V Operating Current 0.25 A - 5 A Power 35 W Measuring Temperature Range -10 °C - 40 °C Display 4 Digit Segment Display Display Color Red Fan Speed 8000 RPM ± 10% | Temperature-controlled Connections USB 2.0, MicroUSB, USB Type-C Dimensions 84 mm x 41 mm x 28 mm Weight 52 g

Read more less

This laboratory power supply offers a controllable 0...60 V or 0...6 A DC main output with a maximum continuous power of 150 W. For developers, this laboratory power supply offers two switchable USB outputs with their own LCD display with voltage and current values.If you use a load up to 2.5 A, you can set the output voltage up to 60 V. If you want to use a higher current up to 6 A, set the load to a maximum of 25 V. Of course, all stages are also adjustable in between, e.g. 30 V/5 A, 40 V/3.7 A or 50 V/3 A.The current and voltage setting also can be done when the output is switched off. By pressing the knob for current or voltage, the setting resolution can be fine/coarse switched from 1 mA to 100 mA or 10 mV to 1 V.Due to the high range of functions and the simple operation with the best price-performance ratio, this laboratory power supply is ideal for the education, hobby, development and service sector. Blue LCD display showing the output voltage and current values Green LCD display showing the USB output voltage and current values 150 W constant output power Adjustable voltage range: 0~60 V at 0~2.5 A and 0~25 V at 2.5~6 A Voltage and current pre-selection with switchable output C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load Protection against short circuit, overload and overtemperature Accessories: Power cable, Connection Leads and Manual Output Voltage 0 ~ 60 V DC (@2,5 A) Output Current 0 ~ 6 A DC (@ 25 V) Output Power 150 W Display Resolution (V) 10 mV Display Resolution (A) 1 mA Setting Resolution (V) 10 mV / 1 V switchable Setting Resolution (A) 1 mA / 100 mA switchable Ripple & noise ≤ 5 mV RMS; ≤ 20 mA RMS Load regulation ≤ 0.05% + 5 mV, ≤ 0.5% + 5 mA Line regulation ≤ 0.1% + 3 mV, ≤ 0.2% + 3 mA Display accuracy +/- 0,5% + 5 dgt. Protection Overload, overtemperature, short circuit Operating voltage 115 / 240 V AC; 50/60 Hz Dimensions (WxHxD) 80 x 160 x 260 mm Weight 1.6 kg

Read more less

Features USB or battery powered External trigger input Built-in 1KHz/3.3V test signal Waveform frozen (HOLD) function available Save/recall waveform Serial waveform data output Specifications Number of Channel 1 Analog Bandwidth 0 - 200 kHz Sensitivity 10 mV/Div - 5 V/Div Sensitivity error < 5% Resolution 12-bit Input Impedance 1 MΩ Maximum Input Voltage 50 Vpk Coupling DC, AC, GND Max Real-time Sampling Rate 1 Msps Timebase 10 us/Div - 500 s/Div Record Length 1024 Trigger Modes Auto, Normal, Single Trigger Types Rising / falling edge Trigger Position 1/2 of buffer size fixed Display 2.4-inch color TFT LCD with 320 x 240 resolution Power Supply 3.5 V - 6 V DC Supply Current 120 mA @ 5 V Dimension 85 x 75 x 15 mm Weight 50 g Note Power supply is not included. The user needs to prepare a USB cable with micro-USB style plug to run the oscilloscope. Any USB port with higher than 150 mA current capacity can be used as a power source for the oscilloscope. Included 1x DSO138mini kit with all SMD parts pre-soldered 1x User Manual Downloads Manual Enclosure Assembly Firmware

Read more less

The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with the included PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. One side of the included baseplate is matte and the other is mirror polished. The mirror polished surface makes it easy to see components on the circuit board underside. For added protection during measurement the included insulation cover can be mounted on one of the surfaces. Included 4x PCBite PCB holders 1x Set of yellow insulation washers for the PCB holders 1x Large Base plate (A4) 1x Insulation cover for the base plate (A4) 1x Micro fiber cloth 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide (PCBite kit) User guide (SQ10 probes)

Read more less

Opera Cake is an antenna switching add-on board for HackRF One that is configured with command-line software either manually, or for automated port switching based on frequency or time. It has two primary ports, each connected to any of eight secondary ports, and is optimized for use as a pair of 1x4 switches or as a single 1x8 switch. Its recommended frequency range is 1 MHz to 4 GHz. When HackRF One is used to transmit, Opera Cake can automatically route its output to the appropriate transmit antennas, as well as any external filters, amplifiers, etc. No changes are needed to the existing SDR software, but full control from the host is available. Opera Cake also enhances the HackRF One’s use as a spectrum analyzer across its entire operating frequency range of 1 MHz to 4 GHz. Antenna switching works with the existing hackrf_sweep feature, which can sweep the whole tuning range in less than a second. Automatic switching mid-sweep enables the use of multiple antennas when sweeping a wide frequency range. Downloads Documentation GitHub

Read more less

OWON VDS1022I 2-channel USB oscilloscope (25 MHz) is a oscilloscope for use with a computer. It is powered by USB and has a small size, making it easy to take it with you. The oscilloscope is very economical. It has a shielded USB connection, reducing interference and protecting the computer against over-voltage. The multi port on the scope can be used for external triggering, trigger out or Pass / Fail output. Features 25 MHz bandwidth, and max 1 GS/s real-time sample rate 10M record length Friendly UI: FFT, or X-Y, and waveform 2 views displayed on the same screen Multi-trigger option: edge, video, slope, pulse, and alternate USB isolation – less signal inference, more PC protection USB bus powering, and LAN remote control (optional) Ultra-thin body design, easy portability Specifications Bandwidth 25 MHz Channel 2+1 (multi) Sample Rate 100 MSa/s Horizontal Scale (s/div) 5 ns/div～100s/div, step by 1～2～5 Record Length 5K Max Input Voltage 400 V (PK - PK) (DC+AC, PK - PK) 40 V (PK - PK) (DC+AC, PK - PK) Vertical Resolution (A/D) 8 bits (2 channels simultaneously) Model VDS1022I Vertical Sensitivity 5 mV/div～5 V/div Trigger Type Edge, Pulse, Video, Slope, and Alternate Trigger Mode Auto, Normal, and Single Acquisition Mode Sample, Peak Detect, and Average Waveform Math ＋, －, ×, ÷, invert, FFT Communication Interface USB 2.0 (isolation) Multi-function Interface Signal Type Level Standard TTL Power Supply 5.0 V/1 A Power Consumption ≤2.5 W Dimensions (W × H × D) 170 x 120 x 18 mm Weight 0.26 kg Included 1x OWON VDS1022I oscilloscope 1x CD-ROM 1x Quick start guide 2x Oscilloscope probe 1x Probe tool 1x Power adapter 1x USB cable 1x Silicone case protectors 1x Power cable Downloads Datasheet User manual SCPI protocol USB driver

Read more less

YARD Stick One (Yet Another Radio Dongle) is a sub-1 GHz wireless transceiver IC on a USB dongle. It is based on the Texas Instruments CC1111. YARD Stick One can transmit or receive digital wireless signals at frequencies below 1 GHz. It uses the same radio circuit as the popular IM-Me. The radio functions that are possible by customizing IM-Me firmware are now at your fingertips when you attach YARD Stick One to a computer via USB. Features Half-duplex transmit and receive Official operating frequencies: 300-348 MHz, 391-464 MHz, and 782-928 MHz Unofficial operating frequencies: 281-361 MHz, 378-481 MHz, and 749-962 MHz Modulations: ASK, OOK, GFSK, 2-FSK, 4-FSK, MSK Data rates up to 500 kbps Full-Speed USB 2.0 SMA female antenna connector (50 ohms) Software-controlled antenna port power (max 50 mA at 3.3 V) Low pass filter for elimination of harmonics when operating in the 800 and 900 MHz bands GoodFET-compatible expansion and programming header GIMME-compatible programming test points Open source Downloads Documentation GitHub

Read more less

GreatFET One is a hardware hacker’s best friend. With an extensible, open source design, two USB ports, and 100 expansion pins, GreatFET One is your essential gadget for hacking, making, and reverse engineering. By adding expansion boards called neighbors, you can turn GreatFET One into a USB peripheral that does almost anything.Whether you need an interface to an external chip, a logic analyzer, a debugger, or just a whole lot of pins to bit-bang, the versatile GreatFET One is the tool for you. Hi-Speed USB and a Python API allow GreatFET One to become your custom USB interface to the physical world.Features Serial protocols: SPI, I²C, UART, and JTAG Programmable digital I/O Analog I/O (ADC/DAC) Logic analysis Debugging Data acquisition Four LEDs Versatile USB functions High-throughput hardware-assisted streaming serial engine Downloads Documentation GitHub

Read more less

This comprehensive collection of test accessories for the electronics area ensure the best suitable measuring adapter for the desired application for each digital multimeter. All clips and cables are manufactured to the latest safety standards and provide a safe implementation in every application for the user. The material used is a flexible and non-slip plastic that can endure the harshest kind of usage. Included in the set: PeakTech 7010 2 x Tapping clamps (red/black) 5 A with round-hook PeakTech 7015 2 x Safety Alligator Clips 10 A (red/black) PeakTech 7020 4 x 4 mm Safety Connection Leads (red/black) PeakTech 7025 2 x 4 mm Safety Connection Leads with Connector (red/black) TKS-8 Test Leads with 2mm Probe Tip and sleeves PeakTech TF-50 Temperature Bead Probe -40 … +204°C PeakTech TF-55 Universal- Temperature Probe -50...+300°C

Read more less

Pokit Meter is a revolutionary tool in the measurement industry. Its incredibly small size means you can put it on a keychain or in your pocket for unprecedented portability. Free yourself from the bench and take your creativity to new places! Pokit Meter harnesses the power of your smartphone, transforming it into an awesome measurement tool. The Pokit App measures a wide range of parameters, including voltage, current, resistance and temperature. It also provides continuity and a diode checker. Pokit Meter is ideal for low voltage electronics, automotive applications, home automation, and much more. Super Handy Retractable Leads: All-in-one multimeter, oscilloscope (one-time) and logger Highly Portable, it Fits in Your Pocket: Fits on your keychain so you can take it anywhere Wireless Connectivity: Connects to your phone via Bluetooth 60 V DC/42 V AC, 2 A Ultra-low Power and Long Battery Life: Suitable for low voltage electronics work (Arduino, Raspberry Pi), automotive applications etc. Full-Featured Multimeter Pokit Meter is a full-featured multimeter. The app brings all your favourite measurement modes into one seamless display. No knobs, no loose and bulky leads. Perfect for use in the home or on the go! True RMS measurement Auto ranging Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% Resistance: 1 to 1M Ohm, ±5% Ambient temperature: 0°C to 60°C, ±1°C Continuity and diode polarity checker Digital Storage Oscilloscope An oscilloscope that small? Never before has this much freedom been brought to your fingertips in the realm of electronic test equipment. Pokit Meter’s oscilloscope captures detailed voltage and current waveforms for real-time display on your smartphone. Simply pinch and drag to zoom and pan. Long-press on the graph to set cursors and trace your signals. Pokit Meter also functions as a spectrum analyser. Switch into DFT mode to view your waveforms in the frequency domain. Sampling: 1 Msample/sec, 12-bit Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% 1mS to 10s acquisition window Auto trigger or adjustable rising/falling trigger level Monitor Parameters Long Term Pokit Meter functions as a stand-alone data logger. It logs temperature, voltage, or current waveforms for periods of up to six months, without connection to a phone. Pokit Meter’s compact nature means it can be placed in tight or hard-to-reach spaces. Simply hook up your Pokit and walk away! 12-bit sampling Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% 1 to 8000 points memory Up to 6 months logging

Read more less

The FNIRSI DSO152 is an extremely practical and cost-effective handheld oscilloscope with a real-time sampling rate of 2.5 MSa/s, a bandwidth of 200 kHz and complete trigger functions (single, normal and automatic). It can be used for both periodic analog signals and non-periodic digital signals and can measure voltages up to ±400 V. Equipped with an efficient one-key AUTO, it can display the measured waveform without cumbersome adjustments. It is equipped with a high-resolution 2.8-inch LCD screen with a resolution of 320x240 pixels and a built-in 1000 mAh high-quality lithium battery for up to 4 hours of operation. Specifications Sampling rate 2.5 MSa/s Bandwidth 200 kHz Vertical sensitivity 10 mV/DIV - 20 V/DIV (Progress according to the 1-2-5 way) Time base range 10µS/DIV - 50s/DIV (Progress according to the 1-2-5 way) Voltage range X1: ±40 V (Vpp: 80 V)X10: ±400 V (Vpp: 800 V) Trigger method Auto/Normal/Single Coupling method AC/DC Display 2.8' (320x240 pixels) USB charging 5 V/1 A Lithium battery capacity 1000 mAh Square wave calibration Frequency: 1K, Duty cycle: 50% Dimensions 99 x 68.3 x 19.5 mm Weight 100 g Included FNIRSI DSO152 oscilloscope Alligator clip probe USB cable Lanyard Manual Downloads Manual

Read more less

The FNIRSI 1013D is a fully featured 2-channel tablet oscilloscope with a high-resolution 7-inch LCD screen (800 x 480 pixels). The oscilloscope has a real-time sampling rate of 1 GSa/s and an analog bandwidth of 100 MHz. With full trigger functions (single/normal/automatic), it can be used for periodic analog signals or non-periodic digital signals. The built-in high-voltage protection module can withstand a continuous voltage of up to 400 V. Features Intelligent anti-burn,1X can withstand up to 400 V withstand voltage. 100 MHz analog bandwidth @ 1 GSa/s sampling rate (1X = 5 MHz,10X = 100 MHz). Fully fit 7-inch 800 x 480 resolution color TFT LCD display with bright colors and high contrast. Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation. High measurement voltage range, 1X can measure 0~40 V, 10X can measure 0~400 V,100X can measure 0~4000 V. Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time−, Period. Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO. One-button waveform storage and screenshot. Built-in 1 GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal. Built-in 6000 mAh rechargeable lithium battery, fully charged for 4 hours of continuous use at the highest screen brightness. Memory compression technology, waveform refresh screen does not flicker. Screen brightness adjustment. Background grid brightness adjustment. Applications Electronic DIY Appliance repair Car repair Equipment debug Scientific research Product development Specifications Channels 2 LCD size 7 inch LCD resolution 800 x 480 Display technology TFT Bandwidth 100 Mhz Sampling rate 1 GSa/s Rise time <3nS Storage depth 240 Kbit Input resistance 1 MΩ Sensitivity 50 mV ~ 500 V Time base 50S ~ 10nS Trigger mode Single/Normal/Auto Trigger edge Rising/Falling Coupling AC/DC Highest test voltage 1X: 40 V, 10X: 400 V Cursor Position XY, Trigger Y Roll mode Yes One button AUTO Yes Waveform storage 1000 pictures + 1000 waveforms Waveform manager Yes Voltage accuracy ±2% Frequency precision ±0.01% high precision Parameter 12 kinds in total Battery 6000 mAh Lithium Standby 4 hours Extension USB export Power supply USB-C, 5 V @ 2 A/3 A/4 A Dimensions 184 x 124 x 50 mm Weight 650 g Included 1x FNIRSI 1013D 2-ch Tablet Oscilloscope 2x 100 MHz Probes (1X and 10X) 1x USB charger 1x USB cable 1x Manual Downloads Manual

Read more less

The PCBite Magnifier (premium build quality made from CNC machined aluminum) enlarges your target and makes it easier to see during soldering, inspection and measurements. Especially useful when placing PCBite hands free probes on fine pitch SMD components during measurements. 3x magnification edgeless lens for increased visibility of the work surface and AR coating (anti-reflection) to reduce reflections from nearby light sources. Optimized design, magnification and focal point for use together with the PCBite PCB holders and baseplates included in all PCBite kits. Can also be used handheld but not standalone without a metal surface as base. At the bottom of the magnifier foot there is a strong magnet perfectly balanced in strength. A low friction bottom cap protects the magnet and the baseplate to make the magnifier easy to slide when repositioning or removing the magnifier from the baseplate. Friction based adjustment of lens tilt and rotate positions takes away the need for annoying and complicated set screws.

Read more less

The DE-5000 is a smart, high-accurate, flexible and easy-to-use portable LCR meter. It features automatic LCR check, 4-wire Kelvin measurement, backlit display with 19999/1999 counts, multiple measurement modes and selectable test frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz or 100 kHz). The DE-5000 LCR meter is a practical helper for engineers or technicians. Features Auto L.C.R. check Ls/Lp/Cs/Cp/Rs/Rp/DCR with D/Q/θ/ESR measurement 4-wire Kelvin measurement 20,000 / 2,000 counts display Backlight Relative mode Series / Parallel modes Components sorting function Low battery indication Auto power off Specifications Test frequency 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz Resistance range 20.000 Ω – 200.0 MΩ DCR range 200.00 Ω – 200.0 MΩ Capacitance range 200.00 pF – 20.00 mF Inductance range 20.000 µH – 2.000 KH Display (backlit LCD) 19999 / 1999 counts Selectable tolerance ±0.25%, ±0.5%, ±1%, ±2%, ±5%, ±10%, ±20% Power supply 9 V battery Dimensions 188 x 95 x 52 mm Weight 350 g (excluding battery) Included DE-5000 LCR meter Alligator test lead case (TL-21) AC/DC adaptor Guard line (TL-23) TL-22 SMD tweezers 9 V battery Carrying case Manual Downloads Datasheet

Read more less

Features No. of Channels: 2 Bandwidth: 0 – 200 KHz per channel Sensitivity range: 5 mV/DIV – 20 V/DIV (using x1 probe) Maximum input voltage: 50 Vpk (using x1 probe) Maximum real time sampling rate: 1 MS/s Time Base range 10 us/DIV – 500 s/DIV X-Y Display Feature: Yes Function Generator Capability: Built-in 0 – 20 KHz (sine) dual channel DDS function generator Display Resolution: 320 x 240 Color display Display Size: 2.4″ Touch Display Capability: Yes Battery powered and portable (battery not included in DIY Kit) Specifications General 2.4” 320x240 color display Touch panel operation Y-X mode available Built-in 2-channel DDS function generator Light weight and portable Vertical Number of Channel: 2 Analog Bandwidth: DC – 200 KHz Sensitivity: 5 mV/Div - 20 V/Div (with x1 probe) Sensitivity error: < 5% Resolution: 12-bit Input Impedance: 1 M ohm / 25 pF Maximum Input Voltage: 50 Vpk Coupling: DC, AC Horizontal Max Real-time Sampling Rate: 1 Msps (per channel) Timebase: 10 us/Div - 500 s/Div Record Length: 1024 points Trigger Trigger Modes: Auto, Normal, Single Trigger Types: Rising/falling edge Trigger Position: 1/2 of buffer size Trigger Source: Ch1, Ch2, External Maximum external trigger voltage: 15 V External trigger threshold: LVTTL Function Generator Number of channel: 2 Waveform type: Sine, Square, Saw-tooth, Stair Frequency range: DC – 20 KHz (Sine) Amplitude range: 0 – 3 V (peak value) Offset: 0 V or +3.3 V Duty Cycle: 0 – 100% Phase: -360 – 360 degree Power Supply Powered on 3.7 V Li-ion battery or USB Current consumption: ~30 0mA @ 3.7 – 5V Internal batter charger (optional) Automatic power off on battery Battery running time: Appr. 3 hrs (when fully charged) Other Features Y-X display mode On-screen measurement display Save / recall up to 4 captures Serial output of captured data Serial port format: LVTTL, 115200 bps, 8N1 Built-in 1 KHz/3.3 V test signal Physical Dimension: 115 x 72 x 30 mm Weight: 0.29 kg (excluding battery and probes)

Read more less

Channels 2 Channel generator, 1 Channel frequency meter Frequency Range Sine: 0-15 MHz; square, triangle: 0-15 MHz; TTL, pulse: 0-6 MHz Signal Forms Sine, square, triangle, pulse, half / solid wave, exponential rise/ fall Measuring Range Frequency Counter 1 MHz - 100 MHz Frequency Accuracy ± 20 ppm Frequency Stability ± 1 Ppm/3h Sampling Rate 266 MSa/s Display 2.4' TFT color LCD Vertical Shaft Resolution 14 bits Amplitude Range < 10 MHz : 0 - 20 Vpp; > 10 MHz : 0 - 10 Vpp Amplitude Resolution 1 mV Amplitude Stability ± 5%/5h Amplitude Flatness <10 MHz: ± 5 %; >10 MHz: ± 10 % Impedance of Output 50 Ω ± 10 % Dimensions 145 mm x 95 mm x 55 mm Weight 680 g It can be used on the go with an optional power bank.To operate the signal generator with a power bank, you need an additional USB to DC connection cable ( 5.5 mm hollow plug ). Please note: The Powerbank and the USB-DC cable are not included. You can find the necessary software here.

Read more less