Raspberry Pi Cases

28 products


  •  -29% Raspberry Pi 4 Case Fan

    Raspberry Pi Foundation Raspberry Pi 4 Case Fan

    Designed for overclockers and other power users, this fan keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled fan delivers up to 1.4 CFM of airflow over the processor, memory, and power management IC. The bundled heatsink (18 x 8 x 10 mm) with self-adhesive pad improves heat transfer from the processor. The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the official Raspberry Pi 4 case.

    € 6,95€ 4,95

    Members identical

  • Official Case for Raspberry Pi 4 (white/red)

    € 7,95

    Members identical

  • JOY-iT Aluminium Case for Raspberry Pi 4 with passive Cooling

    JOY-iT JOY-iT Aluminium Case for Raspberry Pi 4 with passive Cooling

    This aluminium case in a precious design is very robust and protects your Raspberry Pi 4 perfectly against outer influences. There are cut-outs for all interfaces to make them accessible. The channel milling at the top side serves as a heat sink and inside the housing the case is in direct contact with the CPU and the RAM to maximize cooling results. Features Color: Matt black (gun-metal black) Material: High-quality, cast aluminium Special Features: Channel milling which serves as a heatsink, cut outs for all interfaces, heatsink in contact with CPU and RAM of the Raspberry Pi for better cooling performance Dimensions: 91 x 65 x 34 mm Items delivered Aluminium case Screws Heat conduction pads

    € 14,95

    Members € 13,46

  • Official Case for Raspberry Pi 4 (black/grey)

    Raspberry Pi Foundation Official Case for Raspberry Pi 4 (black/grey)

    Officiële behuizing voor Raspberry Pi 4 (zwart/grijs)

    € 7,95

    Members identical

  • PiKVM v3 KVM over IP voor Raspberry Pi 4 (voorgemonteerd)

    PiKVM PiKVM V3 KVM over IP for Raspberry Pi 4 (pre-assembled)

    PiKVM V3 HAT pre-assembled, in steel case with display and fan incl. Raspberry Pi 4 (2 GB) and 32-GB microSD card (pre-installed with PiKVM OS) PiKVM V3 is an open-source Raspberry Pi-based KVM over IP device. It will help you to manage servers or workstations remotely, whatever the state of the operating system or whether one is installed. PiKVM V3 allows you to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the virtual CD-ROM or flash drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. Features HDMI Full HD capture based on the TC358743 chip (extra low latency ~100 ms and many features like compression control). OTG Keyboard & mouse; Mass Storage Drive emulation. Ability to simulate 'removal and insertion' for USB. Onboard ATX power control Onboard fan controller Real-time clock (RTC) RJ-45 and USB serial console port (to manage PiKVM OS or to connect with the server). Optional AVR-based HID (for some rare and strange motherboards whose BIOS doesn't understand the OTG emulated keyboard). Optional OLED screen to display network status or other desired information. Ready-made board. No need for soldering or breadboarding. PiKVM OS – the software is fully open. Specifications Video/Resolution: 1920x1080p at 50 Hz or lower Power: USB-C 5.1 V, 3 A power supply required (not included) Real-time clock with rechargeable Super Capacitor Enclosure: robust 1.6 mm (1/16') steel case Dimensions: 92 x 75 x 45 mm (4 x 3 x 2') Weight: 410 g (14.5 oz.) Connectors Front Back Side Power: USB-C ATX Control Video Out: micro HDMI Serial Console: USB-C + RJ45(one active at a time) OTG Host USB (USB-C) 2x USB 2.0, 2x USB 3.0 HDMI Video input & output Gigabit Ethernet Included PiKVM V3 HAT for Raspberry Pi 4 PiKVM Steel Case incl. Display and Fan Raspberry Pi 4 with 2 GB RAM MicroSD card (32 GB, pre-installed with the PiKVM OS) USB-C bridge board – to connect the HAT with Pi over USB-C ATX controller adapter board and wiring – to connect the HAT to the motherboard (if you want to manage power supply through hardware). 2 flat CSI cables Screws and brass standoffs Required USB-C to USB-A cable HDMI cable Straight Ethernet cable (for the ATX expansion board connection) Power supply unit (5.1 V/3 A USB-C, officiel RPi power supply is recommended) Downloads User Guide Images GitHub Links The PiKVM Project and Lessons Learned: Q&A with PiKVM creator and developer Maxim Devaev PiKVM: Raspberry Pi as a KVM Remote Control

    € 349,00

    Members € 314,10

  • Official Case for Raspberry Pi Zero

    Raspberry Pi Foundation Official Case for Raspberry Pi Zero

    The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera cable supplied, allows the Raspberry Pi Camera or Camera Noir to be fitted neatly inside it). Included 1x base 3x lids (plain, GPIO, camera) 1x short camera cable 4x rubber feet

    € 7,95

    Members identical

  • Official Case for Raspberry Pi 5 (white/red)

    Raspberry Pi Foundation Official Case for Raspberry Pi 5 (white/red)

    The Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case with improved thermal features to support the higher peak power consumption of the Raspberry Pi 5. It integrates a variable speed fan that is powered and controlled via a dedicated connector on the Raspberry Pi 5.

    € 11,95

    Members identical

  •  -50% JOY-iT Magnetic Multimedia Case for Raspberry Pi 4

    JOY-iT JOY-iT Magnetic Multimedia Case for Raspberry Pi 4

    This multimedia case for all Raspberry Pi 4 models is characterized by high functionality, modern design and a sumptuous equipment: Integrated IR receiver, controllable with almost all IR remote controls Controllable LED lighting Switching on/off, controlling additional functions of the Raspberry Pi Active, quiet cooling Toolless, magnetic assembly All connections of the Raspberry Pi are on the backside GPIO port is accessible via separate lid Perfect as a multimedia platform in the living room, desktop device or for the use in digital signage. Specifications Material Acryl Color Black Compatible to Raspberry Pi 4 Power supply 5 VDC (USB-C) Microcontroller STM32F030F4P Infrared receiver TSOP4838 LEDs 4x WS2812Mini Led out connections 1x USB-C, 1x Aux, 2x microHDMIFrom Raspberry Pi: 2x USB-A 3.0, 2x USB-A 2.0, 1x RJ45 Weight 280 g Dimensions 113 x 100 x 38 mm Scope of delivery Multimedia case, adapter board, control board, Aux adapter cable Downloads Datasheet (177.9 KB) Manual (3.5 MB) Expert Guide (6.5 MB) Firmware v1.0.9-beta (11.2 KB) Addons for LibreElec 9 (2.6 MB) Code Examples Addon - Multimedia Case Configuration Addon - LED Configuration Addon - IR Control Configuration Prepared LibreElec Image Prepared LibreElec Image 10.BETA GitHub

    € 29,95€ 14,95

    Members identical

  • Argon ONE M.2 Case for Raspberry Pi 4

    Argon ONE M.2 Case for Raspberry Pi 4

    The Argon ONE M.2 Case ups the ante by providing two full-sized HDMI ports, power management modes that allows for automatic booting, built-in IR support with streamlined options for configuration and integrated M.2 SATA SSD support through the USB 3 ports of the Raspberry Pi 4. Argon ONE M.2 Case extended support for M.2 SATA SSDs allows you to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD card. Argon ONE M.2 is UASP supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive. It is compatible with any M.2 SATA SSD with Key-B and Key B&M. Features M.2 SATA SSD CompatibilityAccepts any size of M.2 SATA SSD with Key-B or Key-B&M UASP Supported for Raspberry Pi 4Maximizes the high speed data transfers for Raspberry Pi 4 Two Full-Sized HDMIImproves the dual-monitor support of the Raspberry Pi 4 for its video input Power Management ModesOffers 2 power management options with automatic booting or “Always ON Mode” Built-in IR SupportProgrammable IR support to the Raspberry Pi with streamlined options. Works out of the box with the Argon ONE Remote. Active CoolingSoftware Programmable 30 mm FAN via the Argon ONE software Passive CoolingAluminum alloy top case acts as a giant heatsink connected to the CPU of the Raspberry Pi 4 Cable ManagementRepositioned all ports to the back of the Raspberry Pi 4 to highlight its sleek and modern design.

    € 64,95

    Members € 58,46

  • Flirc Case for Raspberry Pi 4

    FLIRC FLIRC Case for Raspberry Pi 4

    High quality aluminium case for Raspberry Pi 4 with integrated heatsink to prevent thermal throttling.

    € 21,95

    Members € 19,76

  • Waveshare Ethernet/USB Hub Box for Raspberry Pi Zero (1x RJ45, 3x USB 2.0)

    Waveshare Waveshare Ethernet/USB Hub Box for Raspberry Pi Zero (1x RJ45, 3x USB 2.0)

    1 review

    The ETH-USB-Hub-Box is a Hub kit with ETH/USB Hub HAT (B) inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. This Hub Box will provide RJ45 Ethernet port and more USB capability for your Zero, make it easy to connect the Internet and sorts of USB devices. Features Designed for Raspberry Pi Zero, compatible with Zero series boards 3x extended USB ports, compatible with USB 2.0 / 1.1 Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH Angle rounded design, smooth hand feeling, 'simple snap' case lid Quality ABS material, dull polish surface, anti-fingerprint Comes with two different lids, changing as you like Included 1x ETH/USB Hub HAT (B) 1x ABS case 1x Rubber feet 4pcs 1x Screws pack 1x Screwdriver Downloads Documentation

    € 17,95

    Members € 16,16

  •  -11% JOY-iT Armor Aluminium Heatsink Case with Dual Fan for Raspberry Pi 4

    JOY-iT JOY-iT Armor Aluminium Heatsink Case with Dual Fan for Raspberry Pi 4

    This aluminium-based Armor Case is perfect for your Raspberry Pi 4 if it gets hot, as this protects it against shocks and heat equally. Channel milling combined with dual fans offers best cooling performance. That‘s why it is suitable for extreme settings. Another benefit is that this case does not need more space than the Raspberry Pi itself and can be integrated in existing projects.Features Material: CNC milled aluminium alloy Compatible with Raspberry Pi 4B Assembly: 4 included screws connect the case to the Raspberry Pi Special features: Large heat sink and dual fan each Ø24 mm, massive protection against heat and shocks, no additional space needed Wiring: Fan 5V (Red) - 5V (Pin4), Fan GND (Black) - GND (Pin6) Scope of delivery: Armor case “BLOCK ACTIVE”, screws, thermal tape Size top side: 69 x 56 x 15.5 mm Size bottom side: 87 x 56 x 7.5 mm DownloadsManual

    € 17,95€ 15,95

    Members identical

  • JOY-iT Magnetic Plastic Case with Dual Fan for Raspberry Pi 4

    JOY-iT JOY-iT Magnetic Plastic Case with Dual Fan for Raspberry Pi 4

    The robust plastic housing made of acrylic convinces by modern design and technical innovation. The only distinguishing feature is the new locking mechanism of this housing. It can be assembled in a few steps and the magnetic lock provides easy access to the GPIO pins and the Raspberry Pi 4 B at any time. Thanks to the strong magnets in the upper, middle and lower part of this housing, screw-less mounting is possible. So the cover can be removed at any time. The two integrated fans and the included heat sinks provide a constant cooling of the Raspberry PI 4B. The JOY-iT Acrylic Case with Dual Fan will protect your Raspberry Pi 4 B against exterior impacts and excessive heat development. You can assemble the screwless case in just 4 clicks. The silent twin fans work reliably under high load. Features Material: Plastic Colour: Black and transparent Compatible with Raspberry Pi 4 B Special Features: Built-in dual fan Dimensions: 67 x 97 x 27 mm Weight: 154 g Downloads Datasheet Manual

    € 14,95

    Members € 13,46

  • Official Case for Raspberry Pi 5 (black/gray)

    Raspberry Pi Foundation Official Case for Raspberry Pi 5 (black/gray)

    The Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case with improved thermal features to support the higher peak power consumption of the Raspberry Pi 5. It integrates a variable speed fan that is powered and controlled via a dedicated connector on the Raspberry Pi 5.

    € 11,95

    Members identical

  • Pimoroni Aluminium Heatsink Case for Raspberry Pi 4

    Pimoroni Pimoroni Aluminium Heatsink Case for Raspberry Pi 4

    This anodised aluminium heatsink case will protect your Raspberry Pi 4 and give you very effective passive cooling. It's great in cases where you want completely silent cooling, for instance, if you're building a home media center. The scope of delivery includes a thermal pad to provide thermal contact between the CPU and top case, and a handy Allen key and set of hex bolts to attach the case together. The case gives you access to all of the ports, pins, and connectors. Features Anodised aluminium top and bottom case Heatsink fins Thermal pad Hex bolts and Allen key included Access to all ports, pins, and connectors Compatible with Raspberry Pi 4 Assembly Assembling your heatsink case is pretty easy and should only take a couple of minutes. The first, and most important thing is to make sure that your Pi is powered off and unplugged before you fit the case. Take one of the thermal pads and peel the protective films off both sides of it (there's a white film and an easy-to-miss clear film on the other side. Stick the thermal pad onto your Pi's CPU (the metal square nearest the middle of the PCB). Sticking the thermal pad to the CPU first is a much better way to position it correctly than trying to stick it to the case. Only use one thermal pad with the Raspberry Pi 4. Position the top case and then, holding it in place, flip the whole thing over and position the bottom case on the underside of your Pi. Use the four hex bolts and allen key to secure the case. Notes The case is metal and hence conductive, so be careful not to short any components on it, and ensure that your RPi is powered off and unplugged when fitting the case It may be obvious, but the case will get hot in use Dimensions: 87 × 56 × 25.5 mm

    € 17,95

    Members € 16,16

  • Tower-Case for Raspberry Pi Server Cluster

    JOY-iT Tower-Case for Raspberry Pi Server Cluster

    Tower-Case for Raspberry Pi Server Cluster Material Acryl, brass Capacity up to 7 boards Color Transparent Dimensions 75 mm x 104 mm x 202 mm Weight 226 g

    € 13,95

    Members € 12,56

  • Last stock! Waveshare PoE Ethernet/USB Hub Box for Raspberry Pi Zero (3x USB 2.0, 802.3af-Compliant)

    Waveshare Waveshare PoE Ethernet/USB Hub Box for Raspberry Pi Zero (3x USB 2.0, 802.3af-Compliant)

    2 in stock

    The PoE-ETH-USB-Hub-Box is a Hub kit with PoE/ETH/USB Hub HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small Hub Box and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports. Features Designed for Raspberry Pi Zero, compatible with Zero series boards Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port PoE (Power over Ethernet) feature, 802.3af-compliant Fully isolated SMPS (Switch Mode Power Supply) 3x extended USB ports, compatible with USB 2.0 / 1.1 Angle rounded design, smooth hand feeling, 'simple snap' case lid Quality ABS material, dull polish surface, anti-fingerprint Comes with two different lids, changing as you like Included 1x PoE/ETH/USB Hub HAT kit 1x ABS case 1x Rubber feet 4pcs 1x Screws pack Downloads Documentation

    2 in stock

    € 29,95

    Members € 26,96

  • Seeed Studio re_computer case for Raspberry Pi, BeagleBone and Jetson Nano

    Seeed Studio Seeed Studio re_computer case for Raspberry Pi, BeagleBone and Jetson Nano

    Out of stock

    Features It is compatible with the most popular SBCs including Raspberry Pi, BeagleBone and Jetson Nano. Removable top layer Acrylic Stackable case structure for expansions Included 1x Acrylic Cover 1x Aluminium Frame 1x Heat Dissipation Base 8x Side Panel 8x Standoff 12x Screw 1x Screwdriver 1x Button 1x Assembly Manual Downloads Documentation

    Out of stock

    € 39,95

    Members € 35,96

  • JOY-iT Aluminium Case for StromPi 3

    JOY-iT JOY-iT Aluminium Case for StromPi 3

    Out of stock

    Material: Aluminium Color: Matt black Compatible with: Raspberry Pi 2, 3 and 4 with attached StromPi 3 and Battery Hat Options of Mounting: DIN rail, M4 threaded holes on the bottom of the case Amounts of M4 threads: 4 Active cooling Low-profile heatsink and PCB for fan control and power button included Dimensions: 59 mm x 64 mm x 105 mm

    Out of stock

    € 29,95

    Members € 26,96

  • Official Case for Raspberry Pi 3, 2 and B+ (white/red)

    Raspberry Pi Foundation Official Case for Raspberry Pi 3, 2 and B+ (white/red)

    High-quality ABS construction Removable side panels and lid for easy access to GPIO, camera and display connectors Light pipes for power and activity LEDs Extraordinarily handsome Colour: white/red

    € 7,95

    Members identical

  • Official Case for Raspberry Pi 3, 2 and B+ (black/grey)

    Raspberry Pi Foundation Official Case for Raspberry Pi 3, 2 and B+ (black/grey)

    1 review

    High-quality ABS construction Removable side panels and lid for easy access to GPIO, camera and display connectors Light pipes for power and activity LEDs Extraordinarily handsome Colour: black/grey

    € 7,95

    Members identical

  • Pibow Coupé 4 (Ninja) – Slim Case for Raspberry Pi 4

    Pibow Coupé 4 (Ninja) - Slim Case for Raspberry Pi 4

    Features Compatible with Raspberry Pi 4 only Cutout in lid for 40x30mm heatsink or Fan SHIM Super-slimline profile Fully HAT-compatible Protects your beloved Pi Clear top and base leave Raspberry Pi 4 visible GPIO cut-out Handy laser-etched port labels Leaves all ports accessible Made from lightweight, high-quality, cast acrylic Great for hacking and tinkering! Made in Sheffield, UK Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99 × 66 × 15 mm. In the video below you can see a quick assembly guide.

    € 11,95

    Members € 10,76

  • Official Case for Raspberry Pi 3 A+ (white/red)

    Raspberry Pi Foundation Official Case for Raspberry Pi 3 A+ (white/red)

    The Raspberry Pi A+ Case has been designed to fit both the Pi 3 Model A+ and the Pi 1 Model A+. The high-quality ABS construction consists of two parts. The base features cut-outs to allow access to the microSD Card and the the HDMI, audio/video and USB ports, as well as the power connector.

    € 6,95

    Members identical

  • Pimoroni Pibow Coupe 5 (Ninja) - Case for Raspberry Pi 5

    Pimoroni Pimoroni Pibow Coupe 5 (Ninja) - Case for Raspberry Pi 5

    The slim, hackable and attractive case for Raspberry Pi 5. Pibow 5 lets you access all the ports and connectors on your Raspberry Pi and even has a clever little tab that will let you push the Pi 5's brand new power button whilst it's safely ensconced in its case. The case is designed to fit neatly around Raspberry Pi's new Active Cooler. Features Compatible with Raspberry Pi 5 Official Active Cooler Super-slimline profile Fully HAT/pHAT compatible Protects your Raspberry Pi 5 Clear top leaves Raspberry Pi 5 visible (so you can gaze upon its wonder). GPIO cut-out Leaves all ports and connectors accessible External Power Button Nubbin via compliant mechanism magic Mounting holes on the base that will accommodate M2.5 screws/bolts and the studs on popular Danish ABS construction blocks Made from lightweight high-quality cast acrylic Great for hacking and tinkering Crafted out of five unique layers including a transparent top that leaves your Raspberry Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi 5 while leaving the primary ports and GPIO accessible. This case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly!

    € 11,95

    Members € 10,76

Are you looking for a Raspberry Pi housing? As an electrical engineer, electronics maker or electronics enthusiast, you naturally want to protect your Raspberry Pi well. Fortunately, Elektor offers a wide range of housings for the Raspberry Pi!

We have a suitable housing for every need. This way you can be sure that your precious mini computer is protected against dust, dirt and possible falls.

Why a Raspberry Pi housing?

Why do you choose a housing for your Raspberry Pi? First, an enclosure provides protection. You can store the Pi in a cupboard or drawer without worrying about damage.

In addition, a housing also provides cooling for your Pi, which improves performance. It also simplifies the use of GPIO pins because the Pi's pins are more accessible when inside a case.

At Elektor we only offer high-quality Raspberry Pi housings. Our housings are made of sturdy materials and offer optimal protection against external damage. This way you no longer have to worry about the safety of your Raspberry Pi.

In short, when it comes to Raspberry Pi housings, Elektor is your one-stop shop. Whether you're looking for protection, cooling or accessibility, we have the answer. View our range today and protect your Raspberry Pi with our high-quality housings.

Raspberry Pi 4 case: protect your powerful mini computer

If you are looking for a high degree of protection for your Raspberry Pi 4, our Raspberry Pi 4 case offers a solution. Made from durable materials, and designed with functionality in mind, this case provides ultimate protection for your powerful mini computer.

The snug fit and well-ventilated housing keep your Pi running cool and efficiently. Whether you're a beginner or an experienced user, our Raspberry Pi 4 case is the perfect solution for all your needs.

Raspberry Pi 4 housing with SSD: optimal performance for your Raspberry Pi

The Raspberry Pi 4 is a powerful mini computer, but if you want to improve performance even further, our Raspberry Pi 4 case with SSD is the right choice for you. This enclosure is specially designed to upgrade your Raspberry Pi 4 with an SSD, so that your circuits load at lightning speed and software and files are stored quickly. The housing provides good cooling and protection against damage.

Raspberry Pi case with fan: keep your Pi cool and efficient

Are you looking for a solution to prevent your Raspberry Pi from overheating? Then our Raspberry Pi housing with fan is the ideal solution. This case is designed with efficient cooling in mind, so your Pi continues to perform optimally, even during the most intensive tasks. The fan is not only silent, but also ensures that the housing always remains well ventilated.

Login

Forgot password?

Don't have an account yet?
Create an account