Sensors & LiDAR

74 products


  •  -33% MightyOhm Geigerteller kit (incl. behuizing)

    MightyOhm MightyOhm Geiger Counter Kit (incl. Case)

    Have you ever wondered if the objects in your house are radioactive or not? Does the apple in your fridge give off radiation? Are the books on your shelves giving off gamma rays? You can easily find that out by building your Geiger counter! Thanks to the serial logging function you can track exposure over time, and you can use the mute button to detect radiation without any noise. Detect beta and gamma radiation with your own portable Geiger counter! Features 100% Open Source Hardware! Sensitive to beta and gamma radiation LED and piezo speaker alert you to detected radioactivity. Mute button for silent operation. An ATtiny2313 microcontroller brain that is begging to be hacked! Support for several common Geiger-Müller tubes: SI-3BG, SI-1G, and SBM-20. HV supply can be adjusted from ~300-600 V. Headers for serial (9600 baud), in-circuit programming of the AVR microcontroller, and pulse output (to connect the Geiger counter to other stuff!) Serial data logging! Counts per second (CPS), counts per minute (CPM), and equivalent dose are reported via the serial port once a second. Included Geiger counter kit incl. PCB and all parts 1x SBM-20 Geiger-Müller tube 1x Laser cut acrylic case Downloads Assembly Instructions Case Assembly Instructions Design Files Source Code Usage Instructions

    € 134,95€ 89,95

    Members identical

  •  -40% Elektor 37-in-1 Sensor Kit

    Elektor Labs Elektor 37-in-1 Sensor Kit

    Kit Contents 1x Joystick 1x Relay 1x Big Sound 1x Small Sound 1x Tracking 1x Avoidance 1x Flame 1x Linear Hall Sensor 1x Touch 1x Digital Temperature 1x Buzzer 1x Passive Buzzer 1x RGB LED 1x SMD RGB 1x Two Color (5 mm) 1x Mini Two Color (3 mm) 1x Reed Switch 1x Mini Reed Switch 1x Heartbeat 1x 7 Color Flash 1x Laser Emitter 1x PCB mounted push button 1x Shock, a rolling-ball type Tilt Switch 1x Rotary Encoders 1x Rolling ball Tilt Switch 1x Photoresistor 1x Temp and Humidity 1x Analog Hall 1x Hall Magnetic 1x DS18B20 Temp 1x Analog Temp 1x IR Emission 1x IR Receiver 1x Tap Module 1x Light Blocking Please note: For security reasons the Mercury Tilt Switch and Light Cup are no longer available in current sensor boxes. Downloads Manual

    € 49,95€ 29,95

    Members identical

  • OPEN-SMART GPS – Serial GPS Module for Arduino (APM2.5 Flight Control)

    Kuongshun OPEN-SMART GPS - Serial GPS Module for Arduino (APM2.5 Flight Control)

    The GT-7U GPS module, with its high sensitivity, low power consumption, miniaturization, and its extremely high tracking sensitivity, delivers an extended area of coverage. In an area that the conventional GPS receiver would fail, such as narrow urban sky, dense Jungle environment, GT-7U can achieve high-precision positioning. Its compact size makes it suitable for applications in vehicles, mobile phones, video cameras, and other mobile positioning systems, and it is an excellent choice for GPS applications. Specifications Operating Frequency L1 (1575.42 ±10 MHz) Operating Voltage 3.3 - 5.2 V Operating Current Normal Mode: 50 mA Power-Saving Mode: 30 mA Communication Interface TTL serial port, microUSB interface Serial Port Baud Rate 9600 bps Communication format 8N1 Interface Logic Voltage 3.3 or 5 V External Antenna Inteface IPX Dimensions 2.2 x 2.1 x 0.5 cm Weight 8.5 g

    € 10,95

    Members € 9,86

  • Makerfabs RC522 RFID Reader met Cards Kit (13.56 MHz)

    Makerfabs Makerfabs RC522 RFID Reader with Cards Kit (13.56 MHz)

    Out of stock

    This RC522 RFID Kit includes a 13.56 MHz RF reader module that uses an RC522 IC and two S50 RFID cards to help you learn and add the 13.56 MHz RF transition to your project. The MF RC522 is a highly integrated transmission module for contactless communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode. The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino. Features Operating Current: 13-26 mA/DC 3.3 V Idle Current: 10-13 mA/DC 3.3 V Sleep Current: <80 uA Peak Current: <30 mA Operating Frequency: 13.56 MHz Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, Mifare Pro, MIFARE DESFire Environmental Operating Temperature: -20-80 degrees Celsius Environmental Storage Temperature: -40-85 degrees Celsius Relative humidity: relative humidity 5% -95% Reader Distance: ≥50 mm/1.95' (Mifare 1) Module Size: 40×60 mm/1.57*2.34' Module interfaces SPI Parameter Data transfer rate: maximum 10 Mbit/s Included 1x RFID-RC522 Module 1x Standard S50 Blank Card 1x S50 special-shaped card (as shown by the keyring shape) 1x Straight Pin 1x Curved Pin Downloads Arduino Library MFRC522 Datasheet MFRC522_ANT Mifare S50

    Out of stock

    € 5,95

    Members € 5,36

  • YDLIDAR X4 Lidar – 360-degree Laser Range Scanner (10 m)

    YDLIDAR YDLIDAR X4 Lidar - 360-degree Laser Range Scanner (10 m)

    Out of stock

    YDLIDAR X4 lidar is a 360-degree two-dimensional laser range scanner (LIDAR). This device uses triangulation principle to measure distance, together with the appropriate optical, electrical, algorithm design, to achieve high-precision distance measurement. Features 360-degree scanning distance measurement Small distance error; stable distance measurement and high accuracy Measuring distance: 0.12-10 m Resistance to ambient light interference Industrial grade motor drive for stable performance Laser-grade: Class I 360-degree omnidirectional scanning; 6-12 Hz adaptive scanning frequency Range finder frequency: 5000 times/s Applications Robot navigation and obstacle avoidance Robot ROS teaching and research Regional security Environmental Scan and 3D Reconstruction Home service robot/sweeping robot navigation and obstacle avoidance Specifications Range Frequency 5000 Hz Scanning Frequency 6-12 Hz Range 0.12-10 m Scanning angle 0-360° Range resolution < 0.5 mm (Range < 2 m)< 1% of actual distance (Range > 2 m) Angle resolution 0.48-0.52° Supply Voltage 4.8-5.2 V Voltage ripple 0-100 mV Starting current 400-480 mA Sleep current 280-340 mA Working current 330-380 mA Baud rate 128000 bps Signal high 1.8-3.5 V Signal low 0-0.5 V PWM frequency 10 kHz Duty cycle range 50-100 % Laser wavelength 775-795 nm Laser Power 3 mW FDA Class I Working temperature 0-40 °C Lighting environment 0-2000 Lux Size 102 x 71 x 63 mm Weight 189 g Interface UART: LVTTL Level standard Support scan frequency adjustable: Yes Support low power: Yes Pin Configuration VCC Power Supply 5 V Tx Output Rx Input GND Ground M_EN Motor Enable Control 3.3 V DEV_EN Ranging Enable Control 3.3 V M_SCTP Motor Speed Control 1.8 V NC Reserved Pin Downloads Datasheet User Manual Development Manual SDK Tool ROS

    Out of stock

    € 99,95

    Members € 89,96

  •  -31% Makerfabs PN532 NFC Module V3

    Makerfabs Makerfabs PN532 NFC Module V3

    NFC is a popular technology in recent years. Almost all the high-end phones in the market support NFC. Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. This module is built around NXP PN532. NXP PN532 is very popular in the NFC area. Makerfabs developed this module based on the official document. A library for this module is available. Features Small dimension and easy to embed into your project Support I²C, SPI, and HSU (High-Speed UART), easy to change between those modes Support RFID reading and writing, P2P communication with peers, NFC with Android phone Up to 5~7 cm reading distance On-board level shifter, Standard 5 V TTL for I²C and UART, 3.3 V TTL SPI Arduino compatible, plugin and play with our shield RFID reader/writer supports Mifare 1k, 4k, Ultralight, and DESFire cards ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX) Innovision Jewel cards such as IRT5001 cards FeliCa cards such as RCS_860 and RCS_854 Downloads Usage NFC Library

    € 12,95€ 8,95

    Members identical

  • HC-SR501 PIR Motion Sensor Module

    Kuongshun HC-SR501 PIR Motion Sensor Module

    HC-SR501 auto-senses light for various applications (in house, basement, outdoor, warehouse, garage, etc,) for ventilator control, alarm, etc.Features Automatic infrared detection (LHI778 probe design)Output goes high when objects enter the sensing range, and automatically returns to low when object leaves Optional photosensitive control Optional temperature compensation Trigger mode jumper L: Non-repeatable / delay mode: sensor goes low after the delay, regardless of the presence of the object. H: Repeatable: sensor stays high as long as any object is detected during the delay time. Wide operating voltage range Micro-amp power Output high signal: easy to achieve docking with the various types of circuit. Infrared technology (LHI778 probe design) High sensitivity | high reliability Widely used especially for battery-powered products Specifications Voltage 4.8 V – 20 V Current (idle) <50 µA Logic output 3.3 V / 0 V Delay time 0.3 s – 200 s, custom up to 10 min Lock time 2.5 s (default) Trigger repeat : L = disable , H = enable Sensing range <120 °, within 7 m Temperature – 15 ~ +70 °C Dimension 32 x 24 mmscrew-screw 28 mm, M2 Lens diameter: 23 mm

    € 5,95

    Members € 5,36

  • Wind and Rain Sensors for Weather Station (Wind Vane, Anemometer, Rain Gauge)

    Pimoroni Wind and Rain Sensors for Weather Station (Wind Vane, Anemometer, Rain Gauge)

    Want to build your own weather station? This sensor kit has a cup anemometer and wind vane to measure wind speed and direction and a tipping bucket style rain gauge, together with associated mounting hardware. The sensors in this kit are active mechanical sensors that work by physically interacting with the wind and rain. They use magnets, reed switches and moving parts to produce simple signals that a microcontroller or single board computer can use to calculate wind speed, wind direction and rainfall. The sensor cables are terminated in RJ11 connectors (each sensor only uses two wires though, so if you wanted you could snip off the ends and connect the wires to a different kind of connector). Armatures to mount the sensors are included, as well as a short metal mast that can be lashed to the top of a suitable pole with the included jubilee connectors. Please note that this kit contains the mechanical wind and rain sensors only, and doesn't include any electronic components. You can hook these sensors up to the Pimoroni Weather HAT for Raspberry Pi. Included Wind vane Anemometer (wind speed gauge) Rain gauge Short metal mast (made of two metal poles that slot together) Two plastic arms for mounting the sensors Mounting hardware: jubilee clips, nuts, bolts and cable ties Documentation Getting Started with Weather HAT Comprehensive guide Datasheet

    € 89,95

    Members € 80,96

  • YDLIDAR TG15 Outdoor Lidar – 360-degree Laser Range Scanner (15 m)

    YDLIDAR YDLIDAR TG15 Outdoor Lidar - 360-degree Laser Range Scanner (15 m)

    YDLIDAR TG15 is a 360-degree two-dimensional rangefinder. Based on the principle of TOF, it is equipped with related optics, electricity, and algorithm design to achieve high-frequency and high-precision distance measurement. The mechanical structure rotates 360 degrees to continuously output the angle information as well as the point cloud data of the scanning environment while ranging. Features 360 degree omnidirectional scanning ranging distance measurement Small distance error, stable performance and high accuracy IP65 protection level Strong resistance to ambient light interference Industrial grade brush-less motor drive for stable performance Laser power meets Class I laser safety standards 5-12 Hz adaptive scanning frequency (support customization) Photomagnetic fusion technology to achieve wireless communication, wireless power supply Ranging frequency up to 20 kHz (support customization) Applications Robot navigation and obstacle avoidance Industrial automation Robot ROS teaching and research Regional security Smart transportation Environmental scanning and 3D reconstruction Commercial robot /Robot vacuum cleaner Downloads Datasheet User Manual Development Manual SDK Tool ROS

    € 374,00

    Members € 336,60

  • Makerfabs NFC Stickers (6 pcs)

    Makerfabs Makerfabs NFC Stickers (6 pcs)

    Features NFC chip material: PET + Etching antenna Chip: NTAG216 (compatible with all NFC phones) Frequency: 13.56 MHz (High Frequency) Reading time: 1 - 2 ms Storage capacity: 888 bytes Read and write times: > 100,000 times Reading distance: 0 - 5 mm Data retention: > 10 years NFC chip size: Diameter 30 mm Non-contact, no friction, the failure rate is small, low maintenance costs Read rate, verification speed, which can effectively save time and improve efficiency Waterproof, dustproof, anti-vibration No power comes with an antenna, embedded encryption control logic, and communication logic circuit Included 1x NFC Stickers (6-color kit)

    € 9,95

    Members € 8,96

  • Enviro+ Environmental Monitoring Station for Raspberry Pi

    Pimoroni Enviro+ Environmental Monitoring Station for Raspberry Pi

    1 review

    Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particles*), temperature, pressure, humidity, light, and noise level. Enviro+ is an affordable alternative to environmental monitoring stations that can cost tens of thousands of pounds and, best of all, it's small and hackable and lets you contribute your data to citizen science efforts to monitor air quality via projects like Luftdaten. Features BME280 temperature, pressure, humidity sensor (datasheet) LTR-559 light and proximity sensor (datasheet) MICS6814 analog gas sensor (datasheet) ADS1015 analog to digital converter (ADC) (datasheet) MEMS microphone (datasheet) 0.96' colour LCD (160 × 80) pHAT-format board Fully-assembled Compatible with all 40-pin header Raspberry Pi models Pinout Python library Citizen science air quality monitoring This board was developed in collaboration with the University of Sheffield, with the aim of letting you contribute real-time air quality data from your local area to open data projects like Luftdaten. Devices like Enviro+ allow fine-grained, detailed datasets that let us see shifts in air quality through time and across different areas of cities. The dataset gets better in quality every time an additional The more devices that contribute data, the better quality the dataset becomes. Particulate matter (PM) is made up of tiny particles that are a mix of sizes and types, like dust, pollen, mould spores, smoke particles, organic particles and metal ions, and more. Particulates are much of what we think of as air pollution. The analog gas sensor can be used to make qualitative measurements of changes in gas concentrations, so you can tell broadly if the three groups of gases are increasing or decreasing in abundance. Without laboratory conditions or calibration, you won't be able to say 'the concentration of carbon monoxide is n parts per million', for example. Temperature, air pressure and humidity can all affect particulate levels (and the gas sensor readings) too, so the BME280 sensor on Enviro+ is really important to understanding the other data that Enviro+ outputs. You can implement Enviro+ in IoT applications as well. By connection it to Alexa you can get information about the temperature and humidity of the air by simply asking, or there's also an option to set up a trigger action with IFTTT that turns your Philips Hue lights on when the light level drops below a certain level etc. Software With the Python library you can control control all the parts of your Enviro+. There's a bunch of examples for each of the individual parts, an all-in-one example that shows you the data from Enviro+'s sensors in a visual way.

    € 64,95

    Members € 58,46

  • Dragino LSN50v2-S31 LoRaWAN Temperature & Humidity Sensor (EU868)

    Dragino Dragino LSN50v2-S31 LoRaWAN Temperature & Humidity Sensor (EU868)

    The temperature & humidity sensor used in LSN50v2-S31 is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides strong reliability and long-term stability. The SHT31 is fixed in a waterproof anti-condensation casing for long-term use. The LSN50v2-S31 supports a temperature and humidity alarm feature, the user can get an alarm for instant notice. LSN50v2-S31 is powered by an 8500mAh Li-SOCI2 battery, It is designed for long-term use up to 10 years. Each LSN50v2-S31 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to the local LoRaWAN server and it will auto-connect after power on. Features LoRaWAN v1.0.3 Class A Ultra-low power consumption External 3m SHT31 probe Measure range -40°C ~ 80°C Temperature alarm AT Commands to change parameters Uplink on periodically or Interrupt Downlink to change configure Applications Wireless Alarm and Security Systems Home and Building Automation Automated Meter Reading Industrial Monitoring and Control Long-range Irrigation Systems Temperature Sensor Range: -40 to + 80 °C Accuracy: ±0.2 @ 0-90 °C Resolution: 0.01 °C Long Term Shift: <0.03 °C/yr Humidity Sensor Range: 0 ~ 99.9% RH Accuracy: ± 2% RH (0 ~ 100% RH) Resolution: 0.01% RH Long Term Shift: <0.25% RH/yr Downloads Datasheet User Manual Firmware

    € 69,95

    Members € 62,96

  • Raspberry Pi Sense HAT

    Raspberry Pi Foundation Raspberry Pi Sense HAT

    Out of stock

    The official Sense HAT from the Raspberry Pi Foundation is an add-on board for Raspberry Pi (4, 3, 2, B+ and A+). The Sense HAT has the following sensors: 8x8 RGB LED matrix display Accelerometer Gyroscope Magnetometer Air pressure sensor Temperature Humidity sensor Five-button joystick

    Out of stock

    € 34,95

    Members € 31,46

  • Dragino LDS02 LoRaWAN Door Sensor (EU868)

    Dragino Dragino LDS02 LoRaWAN Door Sensor (EU868)

    The LDS02 is powered by 2x AAA batteries and targets long-time use, these two batteries can provide about 16,000 ~ 70,000 uplink packets. After the batteries run out, the user can easily open the enclosure and replace them with 2 common AAA batteries. It will send periodically data every day as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. The user can also disable the uplink for each open/close event, instead, the device can count each open event and uplink periodically. It also has the open alarm feature, the user can set this feature so the device will send an alarm if the door has been open for a certain time. Each LDS02 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to the LoRaWAN server and it will auto-connect after power on. Features LoRaWAN v1.0.3 Class A SX1262 LoRa Core Door Open/Close detect 2 x AAA LR03 Batteries Door open/close statistics AT Commands to change parameters Uplink on periodically and open/close action Open duration alarm Downlink to change configure Applications Wireless Alarm and Security Systems Home and Building Automation Industrial Monitoring and Control

    € 34,95

    Members € 31,46

  •  -17% DFRobot Gravity – Lightning Distance Sensor

    DFRobot DFRobot Gravity - Lightning Distance Sensor

    The embedded man-made disturber rejection algorithm can effectively avoid the electrical interference generated by various household appliances. In addition to allowing general weather enthusiasts to measure local thunderstorm data simply and efficiently, thanks to its compact size and wide detection range, it can also be embedded in various smart wearable devices for an outdoor climber or people who work at heights.This provides early warning of thunderstorms that people can perceive so that people can take precautions a step ahead. The sensor can also be embedded in the indoor protection device inside lightning-sensitive equipment, and automatically trigger these devices to switch to the backup power to isolate the power grid when lightning strikes. At the moment of lightning, the interrupt pin IRQ generates a pulse. This can be used to trigger the shutter to open, helping photographers to accurately capture the exciting moment of lightning.The maximum estimated distance of lightning strike is 40km. Limited by the inherent measurement method and algorithm, the distance estimation resolution is 1~4km, 40 km in 15 steps.Features Lightning detection within 40km in 15 steps Lighting intensity detection Used both indoors or outdoors Embedded man-made disturber rejection algorithm Applications Consumer Weather Station (thunderstorm measurement) Wearable Devices (outdoor thunderstorm early warning) Lightning Photography Specification Input Voltage : 3.3 V - 5.5 V Maximum Detection Range: 40 km Distance Detection Resolution: 1 km - 4 km Intensity Detection Resolution: 21 bits, i.e. 0 ~16777201 I2C Address: Three options 0x03, 0x02, 0x01 Interface: Gravity I2C (logic level: 0-VCC) Dimension: 30 mm x 22 mm For more information, check out the DFRobot Gravity – Lightning Distance Sensor wiki page here.

    € 29,95€ 24,95

    Members identical

  • Dragino LWL01 LoRaWAN Water Leak Sensor (EU868)

    Dragino Dragino LWL01 LoRaWAN Water Leak Sensor (EU868)

    LWL01 is powered by a CR2032 coin battery, in a good LoRaWAN Network Coverage case, it can transmit as many as 12,000 uplink packets (based on SF 7, 14 dB). In poor LoRaWAN network coverage, it can transmit ~ 1,300 uplink packets (based on SF 10, 18.5 B). The design goal for one battery is up to 2 years. User can easily change the CR2032 battery for reuse. The LWL01 will send periodically data every day as well as for water leak event. It also counts the water leak event times and also calculates last water leak duration. Each LWL01 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to local LoRaWAN server and it will auto connect after power on. Features LoRaWAN v1.0.3 Class A SX1262 LoRa Core Water Leak detect CR2032 battery powered AT Commands to change parameters Uplink on periodically and water leak event Downlink to change configure Applications Wireless Alarm and Security Systems Home and Building Automation Industrial Monitoring and Control

    € 19,95

    Members € 17,96

  • YDLIDAR X2 Lidar – 360-graden Laser Range Scanner (8 m)

    YDLIDAR YDLIDAR X2 Lidar - 360-degree Laser Range Scanner (8 m)

    The YDLIDAR X2 Lidar is a 360-degree two-dimensional distance measurement product. This product is based on the principle of triangulation, and is equipped with relevant optics, electricity, and algorithm design to realize high-frequency and high-precision distance measurement. While the distance is measured, 360 degrees of scanning distance measurement is achieved by continuously obtaining the angle information through the 360 degree rotation of the motor. Features Scanning angle: 360° Scanning range radius: 8 m Ranging resolution: 2% Scan frequency: 5-8 Hz Sampling rate: 3000 Hz Max current: 500 mA Laser wavelength: 775-795 nm Laser power: 3-5 mW Applications Robot navigation and obstacle avoidance Robot ROS teaching and research Regional security Environmental Scan and 3D Reconstruction Home service robot/robot vacuum cleaner navigation and obstacle avoidance Downloads Datasheet User Manual Development Manual SDK Tool ROS

    € 79,95

    Members € 71,96

  • SparkFun GPS-RTK-SMA Breakout – ZED-F9P (Qwiic)

    SparkFun SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic)

    Based on the SparkFun GPS-RTK2 designs, the SparkFun GPS-RTK-SMA raises the bar for high-precision GPS and is the latest in a line of powerful RTK boards featuring the ZED-F9P module from u-blox. The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions, including RTK capable of 10mm, three-dimensional accuracy. With this board, you will be able to know where your (or any object's) X, Y, and Z location is within roughly the width of your fingernail! The ZED-F9P is unique in that it is capable of both rover and base station operations. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1'-spaced pins if you prefer to use a breadboard. We've included a rechargeable backup battery to keep the latest module configuration and satellite data available for up to two weeks. This battery helps 'warm start' the module decreasing the time-to-first-fix dramatically. This module features a survey-in mode allowing the module to become a base station and produce RTCM 3.x correction data. Based on your feedback, we switched out the u.FL connector and included an SMA connector in this version of the board. The number of configuration options of the ZED-F9P is incredible! Geofencing, variable I²C address, variable update rates, even the high precision RTK solution can be increased to 20Hz. The GPS-RTK2 even has five communications ports which are all active simultaneously: USB-C (which enumerates as a COM port), UART1 (with 3.3V TTL), UART2 for RTCM reception (with 3.3V TTL), I²C (via the two Qwiic connectors or broken out pins), and SPI. SparkFun has also written an extensive Arduino library for u-blox modules to easily read and control the GPS-RTK-SMA over our Qwiic Connect System. Leave NMEA behind! Start using a much lighter weight binary interface and give your microcontroller (and its one serial port) a break. The SparkFun Arduino library shows how to read latitude, longitude, even heading and speed over I²C without the need for constant serial polling. Features Concurrent reception of GPS, GLONASS, Galileo and BeiDou Receives both L1C/A and L2C bands Voltage: 5 V or 3.3 V, but all logic is 3.3 V Current: 68 mA - 130 mA (varies with constellations and tracking state) Time to First Fix: 25 s (cold), 2 s (hot) Max Navigation Rate: PVT (basic location over UBX binary protocol) - 25 Hz RTK - 20 Hz Raw - 25 Hz Horizontal Position Accuracy: 2.5 m without RTK 0.010 m with RTK Max Altitude: 50 km Max Velocity: 500 m/s Weight: 6.8 g Dimensions: 43.5 mm x 43.2 mm 2 x Qwiic Connectors

    € 379,00

    Members € 341,10

  • GPS/GNSS Magnetic Mount Antenna – 3 m (SMA)

    SparkFun GPS/GNSS Magnetic Mount Antenna - 3 m (SMA)

    This exceptional GPS/GNSS antenna is designed for both GPS and GLONASS reception. The magnetic mount allows it to be easily mounted to a metal base such as a ground plate or car roof. The antenna is terminated with a 3m cable and standard SMA connector. Features Dimensions: 50x38x17mm Weight: 75g including 3m cable Frequency Range: 1575 - 1610MHz GPS Center Frequency: 1575.42MHz GLONASS Center Frequency: 1602MHz LNA Voltage: 3 to 5VDC LNA Gain: 28dB LNA Current: 10mA Termination Connector: SMA Impedance: 50Ω Right-hand polarization Cable Length: 3 meter

    € 13,95

    Members € 12,56

  • Dragino LSN50v2-D20 LoRaWAN Waterproof Outdoor Temperature Sensor (EU868)

    Dragino Dragino LSN50v2-D20 LoRaWAN Waterproof Outdoor Temperature Sensor (EU868)

    The temperature sensor used in LSN50v2-D20 is DS18B20, which can measure -55°C ~ 125°C with accuracy ±0.5°C (max ±2.0 °C). The sensor cable is made by Silica Gel, and the connection between the metal probe and cable is double compressed for waterproof, moisture-proof, and anti-rust for long-term usage. The LSN50v2-D20 supports a temperature alarm feature, the user can set a temperature alarm for instant notice. It is powered by an 8500mAh Li-SOCI2 battery, It is designed for long-term use up to 10 years. Each LSN50v2-D20 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to the local LoRaWAN server and it will auto-connect after power on. Features LoRaWAN v1.0.3 Class A Ultra-low power consumption External DS18B20 Probe (default 2meters) Measure range -55°C ~ 125°C Temperature alarm AT Commands to change parameters Uplink on periodically or Interrupt Downlink to change configure Applications Wireless Alarm and Security Systems Home and Building Automation Automated Meter Reading Industrial Monitoring and Control Long-range Irrigation Systems

    € 64,95

    Members € 58,46

  • SparkFun GPS Breakout – NEO-M9N, Chip Antenna (Qwiic)

    SparkFun SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic)

    Thanks to the onboard rechargeable battery, you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I²C (u-blox calls this Display Data Channel), making it perfect for the Qwiic compatibility, so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1'-spaced pins if you prefer to use a breadboard. The NEO-M9N module detects jamming and spoofing events and can reports them to the host so that the system can react to such events. A SAW (Surface Acoustic Wave) filter combined with an LNA (Low Noise Amplifier) in the RF path is integrated into the NEO-M9N module, allowing normal operation even under strong RF interferences. U-blox based GPS products are configurable using the popular but dense, windows program called u-centre. Plenty of different functions can be configured on the NEO-M9N: baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All of this can be done within the SparkFun Arduino Library! The SparkFun NEO-M9N GPS Breakout is also equipped with an on-board rechargeable battery that provides power to the RTC on the NEO-M9N. This reduces the time-to-first fix from a cold start (~24s) to a hot start (~2s). The battery will maintain RTC and GNSS orbit data without being connected to power for plenty of time. Features Integrated Chip Antenna 92-Channel GNSS Receiver 1.5m Horizontal Accuracy 25Hz Max Update Rate (4 concurrent GNSS) Time-To-First-Fix: Cold: 24 s Hot: 2 s Max Altitude: 80,000 m Max G: ≤4 Max Velocity: 500 m/s Velocity Accuracy: 0.05 m/s Heading Accuracy: 0.3 degrees Time Pulse Accuracy: 30 ns 3.3 V VCC and I/O Current Consumption: ~31 mA Tracking GPS+GLONASS Software Configurable Geofencing Odometer Spoofing Detection External Interrupt Pin Control Low Power Mode Many others! Supports NMEA, UBX, and RTCM protocols over UART or I²C interfaces

    € 69,95

    Members € 62,96

  • JOY-iT Sensor Kit X40

    JOY-iT JOY-iT Sensor Kit X40

    This high-quality sensor kit has been specially developed for the most common open-source platforms. It is compatible with single-board computers (Raspberry Pi, Banana Pi, CubieBoard, CubieTruck, Beaglebone, pcDuino) and microcontrollers (Arduino, ATmega, AVR, PIC, STM32, etc.). It contains a total of 40 different sensors. You can either solder the sensors or stick them on a board to work on different circuits or experiments. Comprehensive sensor set with 40 sensors including analogue- and voltage-converter High-quality, reliable sensors Universally applicable Kit contents KY-001 Temperature sensor module KY-002 Vibration switch module KY-003 Hall magnetic field sensor module KY-004 Button module KY-005 Infrared transmitter module KY-006 Passive Piezo buzzer module KY-009 RGB LED SMD module KY-010 Light barrier module KY-011 2-color (Red+Green) 5 mm LED module KY-012 Active Piezo buzzer module KY-013 Temperature sensor module KY-015 combi sensor temperature+humidity KY-016 RGB 5 mm LED module KY-017 Tilt switch module KY-018 Photoresistor module KY-019 5 V relais module KY-020 Tilt switch module KY-021 Mini magnetic reed module KY-022 Infrared receiver module KY-023 Joystick module (XY-axis) KY-024 Linear magnetic hall sensor KY-025 Reed module KY-026 Flame sensor module KY-027 Magic light cup module KY-028 Temperature sensor module (Thermistor) KY-029 2-color (Red+Green) 3 mm LED module KY-031 Knock sensor module KY-032 Obstacle detect module KY-033 Tracking sensor module KY-034 7 clour LED flash module KY-035 Bihor magnetic sensor module KY-036 Metal-touch sensor module KY-037 Microphone sensor module (high sensitivity) KY-038 Microphone sound sensor module KY-039 Heartbeat sensor module KY-040 Rotary Encoder KY-050 Ultrasonic distance sensor KY-051 Voltage Translator / Level Shifter KY-052 Pressure sensor / Temperatur sensor (BMP180) KY-053 Analog-digital converter A detailed list with a short description of the functions, programming examples and software, can be found at http://sensorkit.en.joy-it.net.

    € 59,95

    Members € 53,96

  • MonkMakes Plant Monitor

    MonkMakes MonkMakes Plant Monitor

    Monitor soil moisture, temperature and relative humidity measurement with the Plant Monitor. This board is compatible with the BBC micro:bit, Raspberry Pi and most microcontroller boards. Alligator / croc clip rings Ready soldered header pins for your choice of microcontroller. Easy to use UART serial interface Additional analog output for moisture only Built-in RGB LED Downloads Datasheet Instructions

    € 14,95

    Members € 13,46

  • SparkFun GPS Breakout – NEO-M9N, U.FL (Qwiic)

    SparkFun SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic)

    Out of stock

    Additionally, this u-blox receiver supports I²C (u-blox calls this Display Data Channel), making it perfect for the Qwiic compatibility, so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1'-spaced pins if you prefer to use a breadboard. The NEO-M9N module detects jamming and spoofing events and can reports them to the host so that the system can react to such events. A SAW (Surface Acoustic Wave) filter combined with an LNA (Low Noise Amplifier) in the RF path is integrated into the NEO-M9N module, allowing normal operation even under strong RF interferences. U-blox based GPS products are configurable using the popular but dense, windows program called u-centre. Plenty of different functions can be configured on the NEO-M9N: baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All of this can be done within the SparkFun Arduino Library! The SparkFun NEO-M9N GPS Breakout is also equipped with an on-board rechargeable battery that provides power to the RTC on the NEO-M9N. This reduces the time-to-first fix from a cold start (~24s) to a hot start (~2s). The battery will maintain RTC and GNSS orbit data without being connected to power for plenty of time. Features Integrated U.FL connector for use with an antenna of your choice 92-Channel GNSS Receiver 1.5 m Horizontal Accuracy 25 Hz Max Update Rate (4 concurrent GNSS) Time-To-First-Fix: Cold: 24 s Hot: 2 s Max Altitude: 80,000 m Max G: ≤ 4 Max Velocity: 500 m/s Velocity Accuracy: 0.05 m/s Heading Accuracy: 0.3 degrees Time Pulse Accuracy: 30 ns 3.3 V VCC and I/O Current Consumption: ~31 mA Tracking GPS+GLONASS Software Configurable Geofencing Odometer Spoofing Detection External Interrupt Pin Control Low Power Mode Many others! Supports NMEA, UBX, and RTCM protocols over UART or I²C interfaces

    Out of stock

    € 72,95

    Members € 65,66

Login

Forgot password?

Don't have an account yet?
Create an account