Test & Measurement

This radiation survey meter can test electric field radiation and magnetic field emission to reach the optimal test result. It is used to test and learn electromagnetic radiation situations indoor and outdoor. It is equipped with a built-in electromagnetic radiation sensor, which can display the radiation value on the LCD after processing by the control microchip. You can make reasonable processing or taking effective prevention measures toward the electromagnetic radiation according to the test result. Features One detector for two uses, simultaneous detection of electric and magnetic field radiation Color-screen display Sound and light alarm, automatic alarm above safe value Press one button to lock radiation value (data lock) LCD graphic display of radiation value trend Radiation assessment, indicating if current radiation value is at safe level Easy to operate with one hand, move or perform on-site measurement Applications Electromagnetic radiation monitoring: House and apartment, office, outdoor and industrial site Electromagnetic radiation test: Mobile phone, computer, TV set, refrigerator and high voltage cable radiation test Radiation protection product test: Test effects of radiation-proof clothes, radiation-proof film and other prevention articles Specifications Electric field Magnetic field Unit V/m uT / mG Accuracy 1 V/m 0.01 uT/ 0.1 mG Range 1~1999 V/m 0.01~99.99 uT/ 0.1~999.9 mG Alarm threshold 40 V/m 0.4 uT/4 mG Reading display 3½ digit LCD Measurement bandwidth 5 Hz~3500 MHz Sampling time About 0.4s Measurement mode Dual mode at the same time Overload indication Maximum value of measurement range on LCD Operation temperature 0~50°C Operation humidity Relative humidity below 80% Working voltage 3.7 V Power 3.7 V Lithium battery Dimensions 61 x 25 x 134 mm Weight 131 g Downloads Manual

Read more less

The HT641B is a very accurate infrared thermometer that uses a laser to measure the surface temperature of objects quickly and easily. The laser can be aimed at hot surfaces or moving objects, allowing the user to easily capture the temperatures being measured from a safe distance. The device is activated by a trigger and takes a precise temperature reading in a flash. Features High-precision measurements Adiustable emissivity High/Low temperature alarm LCD (Digital display backlit screen) 12:1 (Object distance ratio 12:1) °C/°F unit switch Data Hold Auto Power Off Low battery indication Back light control Laser light control Specifications Infrared temperature measurement –50~600°C (–58~1112°F)0~600°C (32~1112°F) Accuracy ±1.5°C (±2.7°F) Display Black and white screen (1.3') Laser <1 mW (630~670 nm)circular measurement area indication Target distrance ratio 12:1 Tunable emissivity 0.10~1.00 Special range 8~14 µm Response time <0.5s Operating temperature 0~40°C (32~104°F) Power supply 2x 1.5 V AAA Battery (included) Dimensions 147 x 96 x 39 mm Weight 96 g Included 1x HT641B Infrared Thermometer 2x 1.5 V AAA Battery 1x Manual

Read more less

The HT-03 infrared camera integrates surface temperature measurement and real-time thermal imaging. The traditional inferred thermometer needs to measure every component one by one while it is not necessary for infrared imaging camera, thus saving time. The potential problems may be displayed on color display screen clearly. Moreover, the central point measurement cursor is used to locale quickly and accurately to measure the temperature of the target object. In order to increase the differentiation, the HT-03 is provided with a visible light camera. The thermal images and visible images are stored in the device and can be read through USB. The HT-03 is easy to operate and it is the ideal selection for electric power, electronic manufacturing, industrial inspection and other fields. The following major functions increase the product's accuracy and usability: The radiation coefficient may be adjusted to increase the measurement accuracy of objects with half reflection surface. The highest temperature and lowest termperature cursor may guide the users to the areas with highest and lowest temperature of the thermal images. The selectable color palette. Specifications Display size 2.8' (240 x 320) color TFT Infrared resolution 120 x 90 Field angle 26° x 19° Cell size 12 μm NETD ≤50 mK @25°C, @F/1.1 Thermal imaging frame rate ≤25 Hz Lens focal length 3.2 mm Emissivity setting Adjustable from 0.01 to 1.00 IFOV 3.75 mrad Temperature measurement resolution 0.1°C Infrared response band 8 to 14 μm Focus mode Free focus Temperature measurement range -20°C to 550°C (-4°F to 1022°F) Measuring accuracy ±2°C (35.6°F) or ±2% Temperature measurement mode Center point/hot and cold spot tracking Color palette Rainbow, iron, cold color, white hot, black hot Image display mode Infrared/visible light/dual light fusion Lighting system LED fill light Device storage Built-in 4 GB eMMC (user available storage space is about 3 GB) Storage Image/Video Format JPG/MP4 Image/video export method USB connection to computer export Menu language English, German, Italian, Chinese Power supply Rechargeable and removable Lithium battery (18650) Battery capacity 2000 mAh Working time 2 to 3 hours Power interface Micro USB Power configuration 5 minutes / 20 minutes / no automatic shutdown Operating temperature -10°C to +45°C (14°F to 122°F) Storage temperature -20°C to +60°C (-4°F to 140°F) Relative humidity 10% to 85% RH (non-condensing) Dimensions 22.6 x 9.6 x 7.2 cm (8.9 x 3.8 x 2.3') Weight 375 g Included HT-03 thermal imaging camera with wrist strap Manual Micro USB cable 5 W USB power supply (EU)

Read more less

This USB Logic Analyzer is an 8-channel logic analyzer with each input dual purposed for analog data recording. It is perfect for debugging and analyzing signals like I²C, UART, SPI, CAN and 1-Wire. It operates by sampling a digital input connected to a device under test (DUT) at a high sample rate. The connection to the PC is via USB. Specifications Channels 8 digital channels Maximum sampling rate 24 MHz Maximum input voltage 0 V ~ 5 V Operating temperature 0°C ~ 70°C Input impedance 1 MΩ || 10 pF Supported protocols I²C, SPI, UART, CAN, 1-Wire, etc. PC connection USB Dimensions 55 x 28 x 14 mm Included USB Logic Analyzer (8-ch, 24 MHz) USB Cable Jumper Wire Ribbon Cable Downloads Software

Read more less

Pokit Meter is a revolutionary tool in the measurement industry. Its incredibly small size means you can put it on a keychain or in your pocket for unprecedented portability. Free yourself from the bench and take your creativity to new places! Pokit Meter harnesses the power of your smartphone, transforming it into an awesome measurement tool. The Pokit App measures a wide range of parameters, including voltage, current, resistance and temperature. It also provides continuity and a diode checker. Pokit Meter is ideal for low voltage electronics, automotive applications, home automation, and much more. Super Handy Retractable Leads: All-in-one multimeter, oscilloscope (one-time) and logger Highly Portable, it Fits in Your Pocket: Fits on your keychain so you can take it anywhere Wireless Connectivity: Connects to your phone via Bluetooth 60 V DC/42 V AC, 2 A Ultra-low Power and Long Battery Life: Suitable for low voltage electronics work (Arduino, Raspberry Pi), automotive applications etc. Full-Featured Multimeter Pokit Meter is a full-featured multimeter. The app brings all your favourite measurement modes into one seamless display. No knobs, no loose and bulky leads. Perfect for use in the home or on the go! True RMS measurement Auto ranging Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% Resistance: 1 to 1M Ohm, ±5% Ambient temperature: 0°C to 60°C, ±1°C Continuity and diode polarity checker Digital Storage Oscilloscope An oscilloscope that small? Never before has this much freedom been brought to your fingertips in the realm of electronic test equipment. Pokit Meter’s oscilloscope captures detailed voltage and current waveforms for real-time display on your smartphone. Simply pinch and drag to zoom and pan. Long-press on the graph to set cursors and trace your signals. Pokit Meter also functions as a spectrum analyser. Switch into DFT mode to view your waveforms in the frequency domain. Sampling: 1 Msample/sec, 12-bit Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% 1mS to 10s acquisition window Auto trigger or adjustable rising/falling trigger level Monitor Parameters Long Term Pokit Meter functions as a stand-alone data logger. It logs temperature, voltage, or current waveforms for periods of up to six months, without connection to a phone. Pokit Meter’s compact nature means it can be placed in tight or hard-to-reach spaces. Simply hook up your Pokit and walk away! 12-bit sampling Voltage: 10 mV to 60 V DC, 42 V AC (RMS), ±1% Current: 1 mA to 2 A max, ±1% 1 to 8000 points memory Up to 6 months logging

Read more less

The DE-5000 is a smart, high-accurate, flexible and easy-to-use portable LCR meter. It features automatic LCR check, 4-wire Kelvin measurement, backlit display with 19999/1999 counts, multiple measurement modes and selectable test frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz or 100 kHz). The DE-5000 LCR meter is a practical helper for engineers or technicians. Features Auto L.C.R. check Ls/Lp/Cs/Cp/Rs/Rp/DCR with D/Q/θ/ESR measurement 4-wire Kelvin measurement 20,000 / 2,000 counts display Backlight Relative mode Series / Parallel modes Components sorting function Low battery indication Auto power off Specifications Test frequency 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz Resistance range 20.000 Ω – 200.0 MΩ DCR range 200.00 Ω – 200.0 MΩ Capacitance range 200.00 pF – 20.00 mF Inductance range 20.000 µH – 2.000 KH Display (backlit LCD) 19999 / 1999 counts Selectable tolerance ±0.25%, ±0.5%, ±1%, ±2%, ±5%, ±10%, ±20% Power supply 9 V battery Dimensions 188 x 95 x 52 mm Weight 350 g (excluding battery) Included DE-5000 LCR meter Alligator test lead case (TL-21) AC/DC adaptor Guard line (TL-23) TL-22 SMD tweezers 9 V battery Carrying case Manual Downloads Datasheet

Read more less

KrakenSDR is a phase-coherent software-defined radio with five RTL-SDRs KrakenSDR is a five-channel, RX-only, software-defined radio (SDR) based on the RTL-SDR and designed for phase-coherent applications and experiments. Phase-coherent SDR opens the door to some very interesting applications, including radio direction finding, passive radar, and beam forming. You can also use KrakenSDR as five separate radios. KrakenSDR is an upgraded version of the previous product, KerberosSDR. It provides a fifth receive channel, automatic phase-coherence synchronization capabilities, bias tees, a new RF design with cleaner spectrum, USB Type-C connectors, a heavy-duty enclosure, upgraded open source DAQ and DSP software, and an upgraded Android app for direction finding. RTL-SDR KrakenSDR makes use of five custom RTL-SDR circuits consisting of R820T2 and RTL2832U chips. The RTL-SDR is a well-known, low-cost software-defined radio (SDR), but throw five units together and using them on the same PC will not make them 'phase coherent;' each one will receive signals at a slightly different phase offset from the others. This makes it difficult or impossible to achieve a high degree of precision when measuring relationships between signals that arrive at different antennas. To achieve phase coherence, KrakenSDR drives all five RTL-SDR radios with a single clock source, and contains internal calibration hardware to allow the phase relationship between channels to be measured precisely and corrected for. Additionally, the overall design of KrakenSDR works to ensure phase stability, with care taken in the areas of heat management, driver configuration, power supply, and external-interference mitigation. Features Five-channel, coherent-capable RTL-SDR, all clocked to a single local oscillator Built-in automatic coherence synchronization hardware Automatic coherence synchronization and management via provided Linux software 24 MHz to 1766 MHz tuning Range (standard R820T2 RTL-SDR range, and possibly higher with hacked drivers) 4.5 V bias tee on each port Core DAQ and DSP software is open source and designed to run on a Raspberry Pi 4 Direction-finding software for Android (free for non-commercial use) Applications Physically locating an unknown transmitter of interest (e.g. illegal or interfering broadcasts, noise transmissions, or just as a curiosity) HAM radio experiments such as radio fox hunts or monitoring repeater abuse Tracking assets, wildlife, or domestic animals outside of network coverage through the use of low power beacons Locating emergency beacons for search-and-rescue teams Locating lost ships via VHF radio Passive radar detection of aircraft, boats, and drones Traffic-density monitoring via passive radar Beamforming Interferometry for radio astronomy Specifications Bandwidth 2.56 MHz RX Channels 5 Frequency Range 24-1766 MHz Radio Tuner 5x R820T2 Radio ADC 5x RTL2832U ADC Bit Depth 8-bits Oscillator Stability 1 PPM Typical Power Consumption 5 V/2.2 A (11 W) Enclosure Type Heavy-duty CNC Aluminum Dimensions 177 x 112.3 x 25.9 mm Weight 560 g Included 1x KrakenSDR (fully assembled and installed) with Aluminum enclosure 1x Manual Required USB Type-C cable 5 V/2.4 A USB Type-C power supply Antennas Raspberry Pi 4 (for computing) Android phone/tablet with mobile-hotspot capabilities (with direction finding) Downloads Wiki Android App

Read more less

A set of five magnetic, telescopic whip antennas – with 100 MHz to 1 GHz tuning range – that can be used with KrakenSDR for direction finding. The magnets are strong and will be secure on the roof of a moving car. Includes a set of five two-meter, LMR100-equivalent coax cables that have been length matched for better performance.

Read more less

This complete replacement filter set for the Aoyue 8486 Fume Extractor contains a HEPA (High Efficiency Particulate Air) filter, a cotton air (sub) filter and an activated carbon air filter.

Read more less

The Quick 861DW is an advanced Hot Air Rework Station with a 1000 W heating power. It is designed for professional soldering electronic SMD components using lead-free solders. Features Three programmable channels CH1, CH2 and CH3 (for air volume and temperature parameters). Password protection and button lock function available. Magnetic switch in a stand can automatically puts the station into sleep mode when not in use. Easy real-time operation, auto sleeping function available, parameters can be set in sleeping mode. Closed loop sensor, temperature controlled by micro-computer zero trigger, large power, rapid temperature rising, temperature can be easily and accurately adjusted, not affected by airflow. Brushless vortex fan, wide range of airflow adjustable, suitable for many applications. Auto cooling function available, long lifetime ceramic heater. Specifications Power 1000 W Operating voltage AC 200~240 V Temperature range 100-500°C Air volume 1-120 class Air flow 50 l/min (Max) Dimensions 188 x 245 x 135 mm Weight 3.65 kg Downloads Manual

Read more less

Otii Arc is the ultimate developer tool for designing highly energy-efficient devices. It is an easy-to-use, all-in-one, featured-packed tool for every developer's table.It records currents and voltages and displays them in real-time as charts and interactive measurements for analysis and comparisons. Recordings can be synchronized with UART debug logs, giving insights into what drains the energy.Otii Arc is compact, portable, and powered via USB from your laptop (DC supply is optional). It comes with a lifetime subscription of Otii software (standard version), a powerful and easy-to-use desktop application for Ubuntu, Windows & macOS, download here. Channels 10 Sampling Rate 4 kSa/s Main Current (<19.5mA) 1 kSa/s other channels Power Supply Voltage 5 V USB optional 7 V - 9 V DC, up to 5 A Power Consumption < 1 W Operating Temperature 15 °C – 25 °C Storage Temperature -20 °C - 60 °C Cooling Method Convection Dimensions 145 mm x 110 mm x 50 mm Weight 500 g Maximum Measurement Length No limits Testing Modes Main Voltage, Main Current, ADC Voltage, ADC Current, Sense+ Voltage, Sense- Voltage, GPI1 level, GPI2 level, UART RX, UART TX Maximum Output Voltage 3.75 V (USB supply, auto range) 4.20 V (USB supply, high range) 4.55 V (DC supply, auto range) 5.00 V (DC supply, high range) Maximum Output Current 5.0 A peak 2.5 A continuous Maximum Input Voltage 5 V on any pin Maximum Input Current 2.5 A sink capability Range Accuracy Resolution Voltage 5 V ±（0.1% + 1.5 mV) 1 mV Current ±19.5 mA±2.7 A2.7 A - 5.0 A ±（0.1% + 50 nA)±（0.1% + 150 uA)±（1%) 5 nA82 uA1.5 mA For more information, click here.Included Qoitech OTii ARC USB to micro-USB cable

Read more less

This outdoor antenna made of fiberglass is optimized for the reception of ADS-B signals on the 1090 Mhz frequency. The antenna consists of a half-wave dipole with 5 dBi gain, encapsulated inside a fiberglass radome with an aluminum mounting base. With a Raspberry Pi, an RTL-SDR and this antenna, you can receive position data from aircraft in your area for apps such as Flightradar24 or FlightAware. Specifications Frequency 1090 MHz Antenna type Dipole 1/2 wave Connector N female Installation type Mast Diam 35-60 mm (mounting bracket included) Gain 5 dBi SWR ≤1.5 Type of Polarization Vertical Maximum power 10 W Impedance 50 Ohms Dimensions 62.5 cm Tube diameter 26 mm Base antenna 32 mm Operating temperature -30°C to +60°C Included ADS-B antenna (1090 Mhz) Mast bracket (for installation on a 35 to 60 mm diameter mast)

Read more less