Test & Measurement

8 products


  • Sensepeek 4019 PCBite Kit met 2x 200 MHz en 4x SP10 handsfree Probe

    Sensepeek Sensepeek 4019 PCBite Kit with 2x 200 MHz and 4x SP10 handsfree Probe

    PCBite holds your circuit board during soldering, inspection and test. SP200: 200 MHz hands-free oscilloscope probe The first truly hands-free 200-MHz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to set up. Just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54 mm (0.100ʺ) pitch pin header. The SP200 comes with a powerful magnet in the base, as for all PCBite probes and holders, which makes the probe easy to place and reposition. This probe is perfect for those who already has a metal base plate and holders which is a must for the function. SP10: Passive 1:1 hands-free probe A truly hands-free probe! Makes instant measurements or long triggering sessions simple. No more soldering wires to connect your probe or complicated tools to setup. Just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool. The dual pin header connector fits directly on a 2.54 mm (0.100”) connector. The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders, which makes the probe easy to place and reposition. Included 4x PCBite holder 1x Large Base plate (A4) 4x SP10 probes with pin tipped test needles 4x Extra test needles 1x Set of yellow insulation washers 5x Dupont-to-dupont test wires 2x Banana-to-dupont test wires 1x Micro fiber cloth 2x SP200 (200-MHz hands-free oscilloscope probe) 2x Testhook with detachable cable for ground connection 4x Ground cables (5 cm and 10 cm) 2x Set of color coded cable holders (4 colors) 2x Extra test needle Downloads (User Guides) PCBite Kit SP200 SP10

    € 269,00

    Members € 242,10

  • Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    Sensepeek Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.The dual pin header connector fits directly on a 2.54 mm (0.100”) connector.The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.Included 4x PCBite holder 1x Large base plate (A4) 4x PCBite probe with pin tipped test needle 4x Extra crown tipped test needle 1x Set of yellow insulation washers 5x Dupont to dupont test wire 2x Banana to dupont test wire 1x Microfiber cloth DownloadsUser Guide

    € 144,95

    Members € 130,46

  • Sensepeek 4012 PCBite Kit incl. 2x SP10 Probe for DMM

    Sensepeek Sensepeek 4012 PCBite Kit incl. 2x SP10 Probe for DMM

    PCBite is the complete solution handling your circuit board during the development phase. Powerful magnets together with a stainless base plate makes the system flexible, mobile and user friendly. The holder can easily be repositioned to handle circuit boards of varying shape and sizes. The probes are steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter or prefered tool. Included 4x PCBite holder 2x Banana to DuPont test wires red/black 2x SP10 probe with red/black probe head and pin tipped test needles 2x Extra crown tipped test needle 1x Set of yellow insulation washers 1x Large Baseplate (A4) 1x Microfiber cloth Downloads User Guide

    € 104,95

    Members € 94,46

  • Sensepeek 4013 SP100 (100 Mhz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 4013 SP100 (100 Mhz handsfree Oscilloscope Probe)

    The ground probe connection has a detachable quality hook, and the cable fits directly on a 2.54 mm pitch pin header. Included 1 x SP100 - 100 Mhz handsfree oscilloscope probe 1 x Set of color-coded cable holders(4 colors) 1 x Test hook with detachable cable for ground connection 1 x Extra test needle Download User Guide

    € 49,95

    Members € 44,96

  • Sensepeek 4015 PCBite Kit incl. 2x SP100 (100 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 4015 PCBite Kit incl. 2x SP100 (100 MHz handsfree Oscilloscope Probe)

    Features This complete kit includes everything you need for hands-free measurements with your oscilloscope. SP100 is the first truly handsfree 100 Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54 mm (0.100”) pitch pin header. The SP100 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. Included 4x PCBite holder 2x SP100 (100 MHz handsfree oscilloscope probe) 1x Large baseplate (A4) 1x Microfiber cloth 1x Set of yellow insulation washers Downloads User Guide (PCBite Kit) User Guide (SPx00)

    € 169,95

    Members € 152,96

  • Sensepeek 6014 SQ200 (200 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 6014 SQ200 (200 MHz handsfree Oscilloscope Probe)

    The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. Features The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Included 1x SQ200 200 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.2

    € 74,95

    Members € 67,46

  • Sensepeek 6024 SQ500 (500 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 6024 SQ500 (500 MHz handsfree Oscilloscope Probe)

    The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Features Passive 10:1 probe with support for oscilloscopes with automatic scaling Spring-loaded test needle for fine pitch measurements Multiple ground options Color coded cable holders Probe tip protection Insulated, can be used handheld Improved probe holder for handsfree measurement when used with PCBite PCB holders Included 1x SQ500 500 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.1

    € 119,95

    Members € 107,96

  • Sensepeek 6023 SQ350 (350 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 6023 SQ350 (350 MHz handsfree Oscilloscope Probe)

    The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Features Passive 10:1 probe with support for oscilloscopes with automatic scaling Spring-loaded test needle for fine pitch measurements Multiple ground options Color coded cable holders Probe tip protection Insulated, can be used handheld Improved probe holder for handsfree measurement when used with PCBite PCB holders Included 1x SQ350 350 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.1

    € 99,95

    Members € 89,96

Login

Forgot password?

Don't have an account yet?
Create an account