Measuring Tools

304 products


  •  -20% FNIRSI DSO-TC3 (3-in-1) Oscilloscope, Component Tester & Signal Generator

    FNIRSI FNIRSI DSO-TC3 (3-in-1) Oscilloscope, Component Tester & Signal Generator

    DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4' color TFT display and a built-in rechargeable lithium battery for mobile use. Specifications (Oscilloscope) The oscilloscope has a real-time sampling rate of 10 MSa/s and a bandwidth of 500 kHz. With complete trigger function (single, normal, automatic), no matter if you’re using periodic analog signals or non-periodic digital signals. Maximum measured voltage signal is 400 V. Equipped with efficient AUTO, the measured waveform can be displayed without cumbersome adjustments. Real-time sample rate 10 MSa/s Bandwidth 500 khz Input resistance 1 MΩ Coupling method AC/DC Test voltage range 400 V Vertical Sensitivity (x1) 10 mV-10 V Horizontal time base range 1us-10s Trigger mode Auto/Normal/Single Trigger type Rising edge/Falling edge Waveform Freeze Yes Automatic measurement Yes Specifications (Component Tester) The instrument can automatically identify and measure various transistors, including NPN and PNP triodes, N-channel and P-channel mosfet, junction mosfet, diodes, dual diodes, thyristors, and resistors, inductors, capacitors and other passive components. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code. Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc. Specifications (Signal Generator) The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude. Sine wave 1-100 KHz/0-3.3 V/50% Square wave 1-100 KHz/3.3 V/50% Pulse wave 1-100 KHz/3.3 V/0-100% Triangle wave 1-100 KHz/0-3.3 V/50% Ramp 1-100 KHz/0-3.3 V/0-100% DC 0-3.3 V Included 1x DSO-TC3 1x P6100 Oscilloscope Probe (100 MHz) 3x Test Hooks 1x Adapter 1x USB-C Cable 1x Original Manual by FNIRSI (English, Chinese, Russian, Portuguese) 1x Elektor Manual (English, French, German, Italian, Dutch) Downloads Original Manual Firmware v0.3

    € 74,95€ 59,95

    Members identical

  •  -14% Miniware DT71 Mini Digitale Pincet

    Miniware Miniware DT71 Mini Digital Tweezers

    LCR/ESR Meter, Multimeter, SMD Tester with built-in Micro Signal Generator The Miniware DT71 digital tweezers are a truly 'smart' buy for pro engineers and makers alike. The compact DT71 has a unique trinary structure which can be separated into the controller, testing arms, and tweezer tips. You can use the DT71 to take measurements and to automatically identify SMD components such as resistors, capacitors, and diodes. Highlights DT71 Mini Digital Tweezers is a tool for multi-function measurements with full differential input measurement. DT71 has a unique trinary structure, which can be separated into the controller, testing arms, and tweezer tips, flexible to be replaced and combined. It is compact and pocket-size for easy carrying. You can use it in laboratories, workbenches, warehouses, and in the field. It also has dual built-in rechargeable lithium batteries that can last 10 hours at a stretch with a single full charge that takes about 2 hours to charge. DT71 Mini Digital Tweezers have an OLED screen on the 360° rotatable controller, providing visibility at all angles. Smart gesture recognition will automatically identify left/right-hand operation and adjust screen display. It has various measurement types to fulfill all your needs. The test arms of DT71 Mini Digital Tweezers use magnetic elasticity to provide an easy clipping, ergonomic, and long-lasting structure. DT71 Mini Digital Tweezers features a pair of beautiful intensified gold-plated interchangeable tweezer tips, which enables higher measuring accuracy. DT71 Mini Digital Tweezers have manual and automatic Identification modes. In auto mode, DT71 can automatically identify SMDs including resistor, capacitor, inductor, and diode, showing both main and secondary parameters, very useful in fast distinguishing different components. Meanwhile, a built-in miniature waveform signal generator can output a variety of waveform signals. DT71 provides a perfect solution for debugging and maintenance of complex electronic systems and the classification and detection of discrete chip components. Different from other LCR testers, DT71 Mini Digital Tweezers have no physical buttons, instead, it has a hidden touch button on top of the controller, which makes it easy to operate with only a light touch. DT71 Mini Digital Tweezers has intelligent functions such as Automatic identification, Automatic shutdown, and also the firmware can be upgraded. Features Innovative trinary structure: separated into the controller, testing arms, and tweezer tips, which are flexible to be replaced and combined. 360° rotatable controller with OLED screen, with good viewing angles. Smart gesture recognition with automatic identification of left/right-hand operation and adjusting the screen orientation accordingly. Hidden touch button on top of the controller, which makes it easy to operate with only a light touch. Test arms use magnetic elasticity to provide an easy clipping, ergonomic, and long-lasting structure. Built-in dual lithium batteries in test arms, balancing both arms and providing a longer standby time. Several kinds of gold-plated interchangeable tweezer tips, enabling higher measurement accuracy in various usages. Automatically identify SMDs including resistor, capacitor, inductor, and diode, showing both main and secondary parameters. A built-in signal generator can output a variety of waveform signals. Specifications Product Specifications Operation time 10 hrs (in continuous operation) Charging time 2 hrs Display 96 x 16 OLED Size Controller 47 mm Test Arms 106 mm Weight 22 g Operation Hidden touch button Measurement Specifications Range Resolution Accuracy Resistance 0.1 Ω~1 KΩ 0.1 Ω 0.5%+2 1 KΩ~2000 KΩ 1 KΩ 0.5%+2 Capacitance 0.1 pF~1000 pF 0.1 pF 2%+3 0.001uF~400 uF 0.001 uF 2%+3 Inductance 1 uH~1000 uH 1 uH 5%+3 1 mH~50 mH 1 mH 5%+3 Voltage 1 mV~100 mV 1 mV 2%+5 0.1 V~40 V 0.1 V 1%+3 Frequency 10 Hz~1 KHz 10 Hz 0.1%+3 1 KHz~20000 KHz 1 KHz 0.1%+3 Diode Silicon diodes, Schottky diodes, LEDs (+0.1~3V) 0.1 V 1% Max input voltage -5 V~+50 V Source Impedance 1 MΩ Functions Automatic Identification Yes Designated Measurements Yes Continuity and Diode testing Yes Signal Generator SINE 10 KHz, 5 KHz, 2 KHz, 1 Khz, 500 Hz, 200 Hz NOISE 100 KHz USER 10 KHz, 5 KHz, 2 KHz, 1 Khz, 500 Hz, 200 Hz PULSE 100 KHz, 0 KHz, 20 Khz, 10 KHz, 5 KHz, 2 KHz, 1 Khz, 500 Hz, 200 Hz Included 1x DT71 Digital Tweezers 1x Test Arms 2x Tweezer Tips 1x Data Cable 1x Carrying Case 1x Safety Instructions Downloads User Manual v1.3 Firmware v1.15 Calibration v2.0

    € 104,95€ 89,95

    Members identical

  •  -17% Digitaal Desoldeerstation ZD-915

    Zhongdi Digital Desoldering Station ZD-915

    1 review

    Out of stock

    The ZD-915 is a digital desoldering station with ESD protection and digital display of both the actual and set value on an LCD screen. This desoldering station has high power in a compact and robust housing and makes desoldering easy, because it can be operated with one hand. The ZD-915 features a soldering gun that houses a filter that catches any sucked material, so you only need to replace the filters to continue. There is also a temperature sensor in the tip so that temperature fluctuations can be quickly absorbed. Features The temperature is easily adjusted by simple up/down buttons. 140 W temperature controlled soldering station with adjustable range from 160 °C to 480 °C. The desoldering station is designed for lead free desoldering specially. The side of the station features a typical holder with sponge. An illuminated power on/off is also loacted on the front. Specifications Station Voltage supply 220-240 V Power consumption 140 W Vakuum pressure 600 mm HG Desoldering Gun Power consumption 24 V AC 80 WHeat up rating 130 W Temperature 160-480 °C Heating element Ceramic heater Included 1x Desoldering station ZD-915 2x Spare soldering tip 3x Cleaning needle for desoldering tips 1x Spare filter for desoldering gun 1x Manual

    Out of stock

    € 119,95€ 99,95

    Members identical

  •  -20% OWON SDS1102 2-kanaals Oscilloscoop (100 MHz)

    OWON OWON SDS1102 2-ch Oscilloscope (100 MHz)

    OWON SDS1102 is an affordable desktop digital oscilloscope with top features: 2-channel device with 100 MHz bandwidth, 1 GSa/s sample rate, 7' LCD display and 10 K pts wavelength. OWON SDS1102 has a simplified synchronization system which supports two trigger types: level and edge. Designed to solve problems that do not require large amounts of memory and difficult trigger types. Features Bandwidth: 100 MHz 2 channels Sample rate: 100 MS/s Ultra-thin body 7-inch high resolution LCD SCPI and LabVIEW supported Specifications Bandwidth 100 MHz Horizontal Scale (s/div) 5 ns/div – 1000 s/div Channel 2 Vertical Sensitivity 5 mV/div – 5 V/div (at input) DC Gain Accuracy 3% Vertical Resolution (A/D) 8 bits (2 channels simultaneously) Input Input Impedance 1 MΩ, 10 pF Input Coupling AC, DC, GND Max Input Voltage ±400 V, CATI, CATII Passive probes х1; х10 Probe Attenuation Factor х1; х10; х100; х1000 Trigger System Trigger Mode Auto, Normal, Single Trigger Type Edge, Video Edge Trigger Source CH1, CH2 Video Trigger Sampling Type real-time Sample Rate 1 GSa/s Equivalent Sample Rate No Wavelength 10K pts Interpolation sin(x)/x Measurement and Mathematical Treatment System Automatic Measurement Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shootRise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A→B, Delay A→B, area, cycle area Math Functions Addition, Subtraction, Multiplication, Division, FFT General Characteristics Display type 7' color LCD Display Resolution 800 x 480 Power 100-240 V, 45-440 Hz, <15 W Dimensions 301 x 70 x 152 mm Weight 1.1 kg Included 1x OWON SDS1102 Oscilloscope 2x Oscilloscope probe 1x Probe Adjust 1x Mains power cord 1x USB Cable 1x CD-Rom 1x Quickstart Guide Downloads User manual Datasheet

    € 249,00€ 199,00

    Members identical

  • CAN-module MCP2515

    Makerfabs CAN Module MCP2515

    This CAN Module is based on the CAN bus controller MCP2515 and CAN transceiver TJA1050. With this module, you will easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino Uno and so on. Features Support CAN V2.0B Communication rate up to 1 MB/s Working Voltage: 5 V Working Current: 5 mA Interface: SPI Downloads MCP2515 Datasheet TJA1050 Datasheet

    € 9,95

    Members € 8,96

  •  -10% JOY-iT JT-RAD01 Stralingsmeter (Geiger-teller)

    JOY-iT JOY-iT JT-RAD01 Nuclear Radiation Meter (Geiger Counter)

    The JT-RAD01 is a radiation meter for the detection of γ-, β- and X-ray radiation and is characterized by its particularly easy handling, high measurement stability and its handy and robust design. The meter has a large color LCD with backlight. The measurement results can be displayed both as clear statistics and graphically for easy evaluation. Specifications Detectable types of radiation γ-rays, β-rays, x-rays Measurement method Geiger-Müller Counter Dosis units μSv/h, μGy/h, mR/h, cps, cpm Alarm modes LED, vibration, sound Special features Real-time view and graph view, alarm when current and cumulative limits are exceeded Dosis rate 0.00 – 1000 μSv/h (10 mSv/h) Cummulative radiation dose 0.00 μSv – 500.0 mSv Energy range 48 keV – 1.5 MeV ≤±30% (CS-137) Sensitivity 80 CPM/μSv (Co-60) Battery 1100 mAh Lithium-ion Selectable languages English, German Dimensions 4.8 x 3.03 x 1.06' (122 x 77 x 27 mm) Included JT-RAD01 Nuclear Radiation Meter USB-C cable Manual (English/German)

    € 74,95€ 67,50

    Members identical

  •  -37% LabNation SmartScope USB-oscilloscoop

    LabNation LabNation SmartScope USB Oscilloscope

    3 reviews

    Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS (with WiFi bridge). Connect the SmartScope to pretty much any device! Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes. With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second. The Software for the support of Windows / macOS) / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given. Features Channel sampled at 100 MHz/s each AC/DC coupling on analog inputs 100% silent 64 Mbit RAM: x10000 zoom Arbitrary Waveform Generator 8 digital inputs at 100 MS/s each 4 digital outputs at 100 MS/s each Externally power your scope in case your mobile can't supply the juice. Specifications Oscilloscope Bandwidth 30 MHz (-3 dB point) Sample rate 2x 100 MS/s Channels 2 Max pre-trigger position 16x full scale Max post-trigger position Full scale Max full voltage scale 10 V/div (±35 V input range) Min full voltage scale 20 mV/div Analog input range -35 V, +35 V Max input peak-to-peak 40 V Signal coupling AC / DC Precision 8 bit Input impedance 1 MΩ // 10 pF Waverforms 200 waveforms/s Data delay to host < 10 ms Sample depth Up to 4 million samples per channel External trigger Yes Logic Analyzer Input channels 8 Input impedance 100 kOhm // 2 pF to GND Sample rate 100 MS/s Logic level 1.8 V to 5.0 V Diode protection Bidirectional Input data buffer 4 million samples Waverforms 200 waveforms/s Data delay to host < 10 ms Protocol decoders I²C, SPI, UART, I²S integrated User extensible Wave Generator (Analog Output) Output channels 1 Data rate Up to 50 MS/s Output level 0-3.3 V (Opamp driven) Output buffer Up to 2048 samples Max slew rate 30 ns/V Step 13 mV Wave Generator (Digital Output) Channels 4 Data rate Up to 100 MS/s Output level 3.3 V or 5 V (selectable) Output buffer Up to 2048 samples Diode protected Yes Programmable Logic USB controller MicroChip PIC18F14K50 USB interface PicKit3 or USB flashable FPGA Xilinx Spartan 6 FPGA interface JTAG and USB flashable Size & Weight Dimensions (L x W x D) 4.33 x 2.52 x 0.95' (110 x 64 x 24.2 mm) Weight 158 g Case Aluminium Connectivity Device/Host mini USB included Record waveforms Store Matlab (.mat) or Excel (.csv) files through Dropbox Analog BNC 2 probes included Digital 8x 0.1' pitch, probes (included) Sync USB micro B-B Power USB micro B (optional) Included 1x SmartScope USB Oscilloscope 2x Analog probes 1x Digital probe cable 1x Mini-B USB cable Downloads User manual Software GitHub Wiki

    € 239,00€ 149,95

    Members identical

  • JOY-iT LCR-T7 Multi-function Component Tester

    JOY-iT JOY-iT LCR-T7 Multi-function Component Tester

    This LCR meter offers a wide range of functions at a low price. The LCR meter can measure capacitance, resistance, and inductance among other things. In addition, it can automatically recognize components, for example, it can distinguish between different types of transistors, such as NPN or PNP transistors. The device is particularly easy to operate, as all measurements are started at the touch of a single button. Thanks to the integrated 350 mAh battery, measurements can also be carried out on the road. The battery is charged with the help of a 5 V power supply unit (available separately) and the enclosed micro-USB cable. In addition, this measuring device can decode infrared signals and show them as a waveform on the display. Specifications Measurable components Resistor, capacitor, inductor, thyristor, triac, (double) diode, Z-diode, field effect transistor, bipolar transistor, infrared decoder Display type 3.5" TFT LCD (160 x 128 p) Special features Automatic calibration, One key operation Built-in battery Lithium Ion rechargeable, 3,7 V, 350 mAh Dimensions 90 x 70 x 27 mm Items delivered Tester, Micro-USB cable, Test clip, LED, Capacitor Measuring Ranges Capacitance 25 pF - 100 mF Resistance 0.01 Ω - 50 MΩ Inductance 0.01 mH - 20 H Battery 0.1 V - 4.5 V, 300 mAh Z-diode breakdown voltage 0.01 V - 30 V Z-diode 0.01 V - 4.5 V Diode UF < 4,5 V Thyristor / Triac IGT < 6 mA Downloads Manual

    € 29,95

    Members € 26,96

  •  -18% Elektor Dual DC LISN (150 kHz – 200 MHz)

    Eurocircuits Elektor Dual DC LISN (150 kHz - 200 MHz)

    Measuring conducted emission is the simplest and most affordable method of getting some indication of whether a design can meet EMI/EMC requirements. A Line Impedance Stabilization Network (LISN) is an indispensable part of an EMC pre-compliance test setup. In cooperation with Würth Elektronik, Elektor has developed a 5 µH, 50 Ω Dual DC LISN that supports voltages up to 60 V and currents up to 10 A. The instrument measures RF interferences on both channels (the power supply) by means of 5-μH blocking inductances. The internal 10-dB attenuation network – one in each channel – contains a 3rd-order high-pass filter with a cutoff frequency of 9 kHz to protect the input of instruments like a spectrum analyzer from potentially harmful DC voltages or low frequencies coming from the EUT (Equipment Under Test). Specifications RF path Channels 2 (with clamping diodes) Bandwidth 150 kHz – 200 MHz Inductance 5 μH || 50 Ω Internal attenuation 10 dB Connectors SMA DC path Max. current < 10 ADC Max. voltage < 60 VDC DC resistance < 2 x 70 mΩ PCB size 94.2 x 57.4 mm Connectors 4-mm banana Hammond enclosure Type 1590N Dimensions 121 x 66 x 40 mm Included 1x 4-layer PCB with all SMT parts fitted 1x pre-drilled enclosure with ready-printed front panel layout 5x gold-plated, insulated, 4-mm banana sockets, rated for 24 A, 1 kV 1x Hammond enclosure 1590N1, Aluminum (Die-Cast Alloy) More Info Project on Elektor Labs: Dual DC LISN for EMC pre-compliance testing Elektor 9-10/2021: EMC Pre-Compliance Test for Your DC-Powered Project (Part 1) Elektor 11-12/2021: EMC Pre-Compliance Test for Your DC-Powered Project (Part 2)

    € 139,95€ 114,95

    Members identical

  • JOY-iT RD6006 Labvoeding Bundel (360 W)

    JOY-iT JOY-iT RD6006 DC Power Supply Bundle (360 W)

    2 reviews

    The lab power supply JT-RD6006 provides up to 60 V and 6 A in combination with the powerful DC power source. Due to the keypad and a push and rotary encoder, the operation of the power supply unit is very comfortable. In addition, you can easily save and reload up to nine settings using the keypad. The high-resolution 2.4-inch colour display clearly shows all important information. The USB interface and an optional wireless network interface enable the device to be operated via PC or with an app from mobile devices. Moreover, the device has different protection and limit functions like constant voltage operation, constant current operation, overvoltage protection, overcurrent protection and replaceable fuses on the board itself (backside of the power supply). Specifications Input voltage 6-70 V Output voltage 0-60 V Output current 0-6 A Output power 0-360 W Voltage resolution 0.01 V Current resolution 0.001 A Capacity measuring range 0-9999.99 Ah Energy measuring range 0-9999.99 Wh Residual ripple 100 mV(pp) at maximal capacity Display 2.4 inch LCD Dimensions (housing) 172 x 86 x 310 mm Weight (incl. device, power supply and housing) 3 kg Included JT-RD6006 DC Power Supply Power Supply for JT-RD6006 (RD6006-NT) Large aluminium housing for JT-RD6006 (Case02) ESP-12F WiFi Module Downloads Datasheet JT-RD6006 Manual JT-RD6006 PC Software Windows driver Mac driver Linux driver

    € 199,95

    Members € 179,96

  •  -23% Andonstar AD407 HDMI Digitale Microscoop met 7` LCD-scherm

    Andonstar Andonstar AD407 7" HDMI Digital Microscope

    1 review

    Examine your circuits with high precision and solder even the smallest SMDs and elements without any hassle. Features Multifunctional HDMI Digital Microscope features Full HD, comfortable headroom, improved ergonomy, multiple output signals with different resolutions. Tilt angle of the wide LCD monitor is adjustable. Comes with remote control. Can be used as stand-alone. Specifications Screen size 7 inch (17.8 cm) Image sensor 4 MP Video output UHD 2880x2160 (24fps)FHD 1920x1080 (60fps/30fps)HD 1280x720 (120fps) Video format MP4 Magnification Up to 270 times (27 inch HDMI monitor) Photo resolution Max. 12 MP (4032x3024) Photo format JPG Focus range Min. 5 cm Frame rate Max. 120fps (under 600 Lux Brightness & HDP120) Video interface HDMI Storage microSD card (up to 32 GB) Power source 5 V DC Light source 2 LEDs with the stand Stand size 20 x 12 x 19 cm Included 1x Andonstar AD407 Digital Microscope 1x Metal stand with 2 LEDs 1x Optical bracket 1x UV filter 1x IR remote 1x Switch cable 1x Power adapter 1x HDMI cable 2x Screws 1x Screwdriver 1x User manual Downloads User Manual Model Comparison AD407 AD407 Pro AD409 AD409 Pro-ES Screen size 7 inch (17.8 cm) 7 inch (17.8 cm) 10.1 inch (25.7 cm) 10.1 inch (25.7 cm) Image sensor 4 MP 4 MP 4 MP 4 MP Video output 2160p 2160p 2160p 2160p Interfaces HDMI HDMI USB, HDMI, WiFi USB, HDMI, WiFi Video format MP4 MP4 MP4 MP4 Magnification Up to 270x Up to 270x Up to 300x Up to 300x Photo resolution Max. 4032x3024 Max. 4032x3024 Max. 4032x3024 Max. 4032x3024 Photo format JPG JPG JPG JPG Focus distance Min. 5 cm Min. 5 cm Min. 5 cm Min. 5 cm Frame rate Max. 120f/s Max. 120f/s Max. 120f/s Max. 120f/s Storage microSD card microSD card microSD card microSD card PC support No No Windows Windows Mobile connection No No WiFi + Measurement WiFi + Measurement Power source 5 V DC 5 V DC 5 V DC 5 V DC Light source 2 LEDs with the stand 2 LEDs with the stand 2 LEDs with the stand 2 LEDs with the stand Endoscope No No No Yes Stand size 20 x 12 x 19 cm 20 x 18 x 32 cm 18 x 20 x 30 cm 18 x 20 x 32 cm Weight 1.6 kg 2.1 kg 2.2 kg 2.5 kg Price €259.00€199.00 €289.00€229.00 €399.00€279.00 €449.00€299.00

    € 259,00€ 199,95

    Members identical

  •  -30% Andonstar AD409 HDMI Digitale Microscoop met 10,1` LCD-scherm

    Andonstar Andonstar AD409 10.1" HDMI Digital Microscope

    Out of stock

    The Andonstar AD409 microscope is equipped with a 10.1-inch LCD display, giving you a wider viewing range, free your eyes from fatigue. Features 10.1 inch adjustable LCD display Adjustable metal stand & monitor Two metal fixed clips microSD card Capture & Recording Built-in adjustable LEDs HDMI/USB Software supported Specifications Screen size 10.1 inch (25.7 cm) Image sensor 4 MP Video output UHD 2880x2160 (24fps)FHD 1920x1080 (60fps/30fps)HD 1280x720 (120fps) Video format MP4 Magnification Up to 300 times (27 inch HDMI monitor) Photo resolution Max. 12 MP (4032x3024) Photo format JPG Focus range Min. 5 cm Frame Rate Max. 120fps Video interface HDMI Storage microSD card (up to 32 GB) PC support Windows, PC software with measurement Mobile phone, tablet terminal support Support WiFi connection and measurement Power source 5 V DC Light source 2 LEDs with the stand Stand size 18 x 20 x 30 cm Included 1x Andonstar AD409 Digital Microscope 1x Metal stand with 2 LEDs 1x UV filter (already assembled in the lens) 1x IR remote 1x Switch cable 1x Power adapter 1x HDMI cable 1x User manual Downloads User Manual Software Model Comparison AD407 AD407 Pro AD409 AD409 Pro-ES Screen size 7 inch (17.8 cm) 7 inch (17.8 cm) 10.1 inch (25.7 cm) 10.1 inch (25.7 cm) Image sensor 4 MP 4 MP 4 MP 4 MP Video output 2160p 2160p 2160p 2160p Interfaces HDMI HDMI USB, HDMI, WiFi USB, HDMI, WiFi Video format MP4 MP4 MP4 MP4 Magnification Up to 270x Up to 270x Up to 300x Up to 300x Photo resolution Max. 4032x3024 Max. 4032x3024 Max. 4032x3024 Max. 4032x3024 Photo format JPG JPG JPG JPG Focus distance Min. 5 cm Min. 5 cm Min. 5 cm Min. 5 cm Frame rate Max. 120f/s Max. 120f/s Max. 120f/s Max. 120f/s Storage microSD card microSD card microSD card microSD card PC support No No Windows Windows Mobile connection No No WiFi + Measurement WiFi + Measurement Power source 5 V DC 5 V DC 5 V DC 5 V DC Light source 2 LEDs with the stand 2 LEDs with the stand 2 LEDs with the stand 2 LEDs with the stand Endoscope No No No Yes Stand size 20 x 12 x 19 cm 20 x 18 x 32 cm 18 x 20 x 30 cm 18 x 20 x 32 cm Weight 1.6 kg 2.1 kg 2.2 kg 2.5 kg Price €259.00€199.00 €289.00€229.00 €399.00€279.00 €449.00€299.00

    Out of stock

    € 399,00€ 279,00

    Members identical

  •  -33% Andonstar AD409 Pro-ES HDMI Digitale Microscoop met 10,1` LCD-scherm (incl. Endoscoop)

    Andonstar Andonstar AD409 Pro-ES 10.1" HDMI Digital Microscope (incl. Endoscope)

    The Andonstar AD409 Pro-ES is a digital microscope with an extra-high stand that is also equipped with an endoscope. The microscope allows clear observation of the sides of components, the inside of pipes, etc., enabling 360° observation without dead angles. The microscope also has a remote control that allows you to easily switch between the following image modes: two-lens, microscope and endoscope. Features High-quality metal lens and focusing barrel Professional HDMI digital microscope supports multiple output methods Soldering Microscope with Pro Metal Stand Unique UV filter design 8 Levels adjustable LED Lights Convenient Wireless Remote Control Professional Measurement Software Specifications Screen size 10.1 inch (25.7 cm) Image sensor 4 MP Video output UHD 2880x2160 (24fps)FHD 1920x1080 (60fps/30fps)HD 1280x720 (120fps) Video format MP4 Magnification Up to 300 times (27 inch HDMI monitor) Photo resolution Max. 12 MP (4032x3024) Photo format JPG Focus range Min. 5 cm Frame Rate Max. 120fps Video interface HDMI Storage microSD card (up to 64 GB) PC support Windows, PC software with measurement Mobile phone, tablet terminal support Support WiFi connection and measurement Power source 5 V DC Light source 2 LEDs with the stand Endoscope Yes Stand size 18 x 20 x 32 cm Included 1x Andonstar AD409 Pro-ES Digital Microscope 1x Endoscope 1x Metal stand with 2 LEDs 1x UV filter (already assembled in the lens) 1x IR remote 1x Switch cable 1x Power adapter 1x Wrench 2x Metal clips 1x HDMI cable 1x User manual Downloads User Manual Software Model Comparison   AD407 AD407 Pro AD409 AD409 Pro-ES Screen size 7 inch (17.8 cm) 7 inch (17.8 cm) 10.1 inch (25.7 cm) 10.1 inch (25.7 cm) Image sensor 4 MP 4 MP 4 MP 4 MP Video output 2160p 2160p 2160p 2160p Interfaces HDMI HDMI USB, HDMI, WiFi USB, HDMI, WiFi Video format MP4 MP4 MP4 MP4 Magnification Up to 270x Up to 270x Up to 300x Up to 300x Photo resolution Max. 4032x3024 Max. 4032x3024 Max. 4032x3024 Max. 4032x3024 Photo format JPG JPG JPG JPG Focus distance Min. 5 cm Min. 5 cm Min. 5 cm Min. 5 cm Frame rate Max. 120f/s Max. 120f/s Max. 120f/s Max. 120f/s Storage microSD card microSD card microSD card microSD card PC support No No Windows Windows Mobile connection No No WiFi + Measurement WiFi + Measurement Power source 5 V DC 5 V DC 5 V DC 5 V DC Light source 2 LEDs with the stand 2 LEDs with the stand 2 LEDs with the stand 2 LEDs with the stand Endoscope No No No Yes Stand size 20 x 12 x 19 cm 20 x 18 x 32 cm 18 x 20 x 30 cm 18 x 20 x 32 cm Weight 1.6 kg 2.1 kg 2.2 kg 2.5 kg Price €259.00€199.00 €289.00€229.00 €399.00€279.00 €449.00€299.00

    € 449,00€ 299,00

    Members identical

  •  -18% 2-in-1 SMD Hetelucht Rework Station ZD-8922

    Zhongdi 2-in-1 SMD Hot Air Rework Station ZD-8922

    This 2-in-1 SMD hot air soldering station offers a cost-effective solution for soldering and desoldering all types of SMD components. Features Incl. soldering iron and hot air pump. It is suitable for soldering and desoldering all types of surface mounted IC, PCB or components. The control unit has 2 LEDs that display the temperature and in °C and °F. The temperature can be easily adjusted with simple up/down buttoms. The hot air temperature can be calibrated from 3L/min to 24L/min continuously. Temperature is micro-processor controlled and can be adjusted. Temperature range: 50-480 °C for soldering iron, 100-500 °C for hot air pump. Specifications Power Soldering iron: 24 V, 60 WHot air pump: 300 W Power supply 220-240 VAC 50 Hz Temperature range Soldering iron: 50-480 °CHot air pump: 100-500 °C Dimensions 113 x 125 x 175 mm Weight 2 kg Included 1x Soldering station 1x Soldering iron 1x Hot air gun 3x Hot air nozzle 1x Soldering iron with needle bit 1x Power cord 1x Soldering iron stand with sponge

    € 109,95€ 89,95

    Members identical

  •  -14% Verbeterde T-962 Infrarood reflow-oven (Elektor versie)

    Upgraded T-962 Infrared Reflow Oven (Elektor Version)

    This upgraded version (available exclusively from Elektor) contains the following improvements: Enhanced protective earthing (PE) for furnace chassis Extra thermal insulation layer around furnace to reduce odors The infrared IC heater T-962 is a microprocessor-controlled reflow oven that you can use for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed. A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMDBGA and other small electronic parts mounted on a PCB assembly. The T-962 may be used to automatically rework solder to correct bad solder joints, remove / replace bad components and complete small engineering models or prototypes. Features Large infrared soldering area Effective soldering area: 180 x 235 mm; this increases the usage range of this machine drastically and makes it an economical investment. Choice of different soldering cycles Parameters of eight soldering cycles are pre defined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down. Special heat up and temperature equalization with all designs Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder. Ergonomic design, practical and easily operated Good build quality but at the same time light weight and a small footprint allows the T-962 to be easily bench positioned transported or stored. Large number of available funtions The T-962 can solder most small parts of PCB boards, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production. Specifications Max. soldering area 180 x 235 mm (7.1 x 9.3') Rated power 800 W Processing time 1~8 minutes Power supply 220 V AC/60 Hz Dimensions 31 x 29 x 17 cm (12.2 x 11.4 x 6.7') Weight 6.2 kg Downloads Manual GitHub

    € 279,00€ 239,00

    Members identical

  •  -21% FNIRSI 2C23T (3-in-1) 2-ch Oscilloscope (10 MHz) + Multimeter + Signal Generator

    FNIRI FNIRSI 2C23T (3-in-1) 2-ch Oscilloscope (10 MHz) + Multimeter + Signal Generator

    The FNIRSI 2C23T is a fully functional, highly practical 3-in-1 dual channel digital oscilloscope with a high resolution 2.8-inch LCD display (320 x 240 pixels) designed for the maintenance and development industry. This device is equipped with 3 main functions: oscilloscope, multimeter and signal generator. The oscilloscope has an FPGA+MCU+ADC hardware architecture with a sampling rate of 50 MS/s, an analog bandwidth of 10 MHz and a built-in high-voltage protection module that supports the measurement of peak voltages of ±400 V maximum. The multimeter has a 4-digit 10000-point RMS value and supports AC/DC voltage and current measurements, as well as capacitance, resistance, diode, on/off and other measurement functions. Equipped with a built-in DDS function signal generator, it can output 7 kinds of function signals, with a maximum output of 2 MHz for all signals and a step of 1 Hz; the output frequency, amplitude and duty cycle are adjustable. The built-in 3000 mAh rechargeable lithium battery achieves a standby time of up to 6 hours. Features 2-ch oscilloscope 10 MHz bandwidth 50 MS/s real-time sampling rate 7 signal waveforms 10000 counts 2.8' HD color display (320 x 240 pixels) Dimensions: 167 x 89 x 35 mm Weight: 300 g Specifications Oscilloscope Dual channel, 2x 10 MHz bandwidth, 50 MS/s real-time sampling rate Maximum measured voltage: ±400 V FPGA+ADC+MCU high-performance hardware architecture, capturing waveform details without loss Equipped with complete triggering functions (auto, single, normal) Equipped with efficient automatic adjustment, the measured waveform can be displayed without complicated adjustment Save waveform screenshots, supports exporting images to a computer, facilitate secondary waveform analysis Multimeter 4-bit integer 9999 counting True RMS measurement Identification of voltage, current, capacitance, resistance, diode, on/off, and zero live wire Maximum input voltage: AC 750 V, DC 1000 V Automatic range, intelligent anti burning Data retention, color screen digital display Signal Generator 7 signal waveforms: sine wave, square wave, triangular wave, full wave, half wave, noise wave, DC Output frequency: 1 Hz-2 MHz Output amplituade: 0.1-3.3 V Output duty cycle: 0-100% Included 1x FNIRSI 2C23T (3-in-1) 2-ch Oscilloscope 1x P6100 oscilloscope probes (10X) 1x Multimeter probe 1x Crocodile clip probe 1x USB-C charging cable 1x Original Manual by FNIRSI (English, German, Spanish, Portuguese, Russian, Chinese) 1x Elektor Manual (English, French, German, Dutch) Downloads Manual Firmware V2.0.2

    € 94,95€ 74,95

    Members identical

  •  -15% JOY-iT 3-in-1 Handheld Oscilloscoop, Signaalgenerator en Multimeter (DMSO2D72)

    JOY-iT JOY-iT 3-in-1 Handheld Oscilloscope, Signal Generator and Multimeter (DMSO2D72)

    The JOY-iT DMSO2D72 is your ideal companion for the workshop and outdoor use. It combines a 2-channel oscilloscope, a signal generator for any wave type as well as a multimeter with 6 different measurement types in one device and serves all functions you expect from individual devices. JOY-iT has placed particular emphasis on simple, clear and practical handling in order to make work as pleasant as possible for the user. For this the DMSOD72 is equipped with a 'one-button' auto measuring function and a 'one-button' page out. In addition, 2 signals can be compared directly on the 2.8' 65K colour LCD display. The power supply is provided by two 18650 lithium batteries, which are included in the scope of supply and allow a continuous operation of one day as well as a standby time of up to 8 weeks. Furthermore, operation via the USB-C interface is also possible, during which the batteries are charged simultaneously. In order to protect the device perfectly in 'outdoor use', the DMSO2D72 was equipped with a silicone sheath, which offers protection against shocks, dirt and heat. The extensive and very user-friendly software is available in English, German and French and can be switched easily on the device. You will also be impressed by the PC software, which provides you with a multitude of functions with very high ease of use. General Specifications Display type 2.8' 64K color TFT-LCD Display resolution 320 x 240 Display settings Adjustable background brightness, backlight duration, auto power off time Protective case Silicon cover, good impact resistance, outstanding heat resistance, easy to disassemble Special features Mobile use through battery operation, 3-in-1 device (oscilloscope, signal generator, multimeter), 3 languages (German, English, French) Assembly / Stand function 45° suspension bracket Interface USB Type C for power/data Rechargeable battery 2x 16850 Lithium Charging current 5 V / 2 A Battery life In use: A full dayIn standby: Up to 8 weeks PC software Windows 7 and higher Operating temperature 0-50°C Dimensions 199 x 98 x 40 mm Weight 624 g Oscilloscope Channels 2 + DMM + AWG Bandwidth 70 MHz Sampling Rate 250 MSa/s Single channel125 MSa/s Dual channel Vertical resolution 10 mV - 10 V Automatic measurement of Frequency and amplitude Manual cursor measurement Voltage and time Output impedance (DC) 25 pF ±3 pF; 1 MΩ ±2% Maximum input voltage 150 V RMS Signal Generator Sampling rate 250 MSa/s Vertical resolution 12 bits Waveforms Sine, square, triangle, trapezoid, and many more Sine 1 Hz - 25 MHz Square 1 Hz - 10 MHz Triangle 1 Hz - 1 MHz Trapezoid 1 Hz - 5 MHz Frequency resolution 1 Hz Output impedance 50 Ω Digital Multimeter 6 Multimeter measuring modes Voltage, current, resistance, capacity, diode, on-off Max. resolution 4000 Counts Ranges Voltage 0 µV - 600 V DC0 mV - 600 V AC, 40-400 Hz Current 0 µA - 10 A Resistance 0 mΩ - 40 MΩ Capacity 0 pF - 100 µF Diode 0-2 V On-off <50 Ω Included JOY-iT 3-in-1 Handheld DMSO2D72 2 rechargeable batteries (18650, 2600 mAh) Passive 80 MHz Probe + accessories 2x BNC to crocodile clip coaxial cable 2x DMM test lead USB to USB-C cable USB power supply (5 V, 2 A) Downloads JT-DMSO2D72 Datasheet JT-DMSO2D72 PC Software 1.1.10 JT-DMSO2D72 Manual Flash Manual 28-07-2021 Flash Software Latest firmware version (08-06-2021)

    € 259,00€ 219,00

    Members identical

  •  -14% Elektor CheatKard (Electrical Engineering Reference Cards)

    Elektor CheatKard (Electrical Engineering Reference Cards)

    Electrical Engineering Tools in your PocketA set of 8 credit card-size, flexible cards packed with reference data all electronics designers need easy and instant access to. Whether you reverse-engineer an SMD board, figure out component values, or decide your best way to have a PCB manufactured, these gold plated cards provide instant technical guidance at real-life size for all aspects of PCB design state and electronics in general.There are 7 cards covering over 16 measurement techniques, over 100 schematic symbols, 2 value calculators (C, R), over 132 SMD footprints, 8 electronics laws & theory, and a powerful PCB design aid showing actual copper thickness, plating and finishing methods, track widths, and more. Plus, there’s an Elektor card showing their distinctive and legacy schematic drawing style and component symbols. To complete the set, there’s an Elektor cover card magnifying card for close inspection of PCB traces and SMD parts.Set comprises: 9 cards (flexible, 80 x 50 x 0.6 mm, 18K gold-plating) 1 Magnifying card 1 Carabiner key ring 1 Leather sleeve / pouch

    € 34,95€ 29,95

    Members identical

  • JOY-iT JDS6600 signaalgenerator & frequentieteller

    JOY-iT JOY-iT JDS6600 Signal Generator & Frequency Counter

    The JDS6600 is a 2-channel signal generator that generates signals up to 60 MHz. With its different waveforms, such as sine, square, triangle, pulse, half-wave and many more, it can be used in all areas of measurement technology. In addition, a 1-channel frequency counter is integrated. With a frequency accuracy of ±20 ppm and stability of ±1 ppm/3 h, it offers excellent signal quality and flexibility. The 2.4' TFT color display also ensures optimum user-friendliness, resulting in a wide range of possible applications. Features 2-channel signal generator (60 MHz) 1-channel frequency counter (100 MHz) Signal forms: Sine, square, triangle, pulse, halfwave, noise, Lorenz pulse, exponential rise/fall, CMOS and more Specifications Frequency range (Sine) 0 - 60 MHz Frequency range (Square, Triangle) 0 - 15 MHz Frequency range (PWM, CMOS, TTL, Arbitrary) 0 - 6 MHz Min. Frequency Resolution 0.1 µHz Frequency accuracy ±20 ppm Frequency stability ±1 ppm / 3 h Display TFT color LCD Display size 2.4' Operating temperature & humidity T: 0 - 40 °C / H: < 80% Dimensions 194 x 178 x 69 mm Included 1x JOY-iT JDS6600 signal generator 2x BNC signal terminals 1x Power supply Downloads Communication Protocol Datasheet Manual Software

    € 149,95

    Members € 134,96

  • Sensepeek 4019 PCBite Kit met 2x 200 MHz en 4x SP10 handsfree Probe

    Sensepeek Sensepeek 4019 PCBite Kit with 2x 200 MHz and 4x SP10 handsfree Probe

    PCBite holds your circuit board during soldering, inspection and test. SP200: 200 MHz hands-free oscilloscope probe The first truly hands-free 200-MHz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to set up. Just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54 mm (0.100ʺ) pitch pin header. The SP200 comes with a powerful magnet in the base, as for all PCBite probes and holders, which makes the probe easy to place and reposition. This probe is perfect for those who already has a metal base plate and holders which is a must for the function. SP10: Passive 1:1 hands-free probe A truly hands-free probe! Makes instant measurements or long triggering sessions simple. No more soldering wires to connect your probe or complicated tools to setup. Just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool. The dual pin header connector fits directly on a 2.54 mm (0.100”) connector. The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders, which makes the probe easy to place and reposition. Included 4x PCBite holder 1x Large Base plate (A4) 4x SP10 probes with pin tipped test needles 4x Extra test needles 1x Set of yellow insulation washers 5x Dupont-to-dupont test wires 2x Banana-to-dupont test wires 1x Micro fiber cloth 2x SP200 (200-MHz hands-free oscilloscope probe) 2x Testhook with detachable cable for ground connection 4x Ground cables (5 cm and 10 cm) 2x Set of color coded cable holders (4 colors) 2x Extra test needle Downloads (User Guides) PCBite Kit SP200 SP10

    € 269,00

    Members € 242,10

  • Build Your Own Multifunctional 4-Axis CNC Machine

    Elektor Publishing Build Your Own Multifunctional 4-Axis CNC Machine

    Plot, Cut, Drill, Mill and Laser with the Z99This book covers the construction, hardware, software, and operation of the Z99 – CNC machine. This is a multifunctional 4-axis machine for home construction.The capabilities of the Z99 machine include: large-format schematic plotting PCB plotting with etch-resist pens schematic plotting with conductive-ink pens letter cutting out of vinyl paper cutting PCB/substrate drilling PCB/substrate milling text milling laser engraving laser cutting of solder paste masks By making the support software available as freeware, readers of the book are challenged and encouraged to develop new applications for the Z99.The machine would not be of much use if the user has no option to create suitable files for the designs in mind. A large part of this book is dedicated to creating source files in a variety of freeware software packages, including Inkscape, DesignSpark PCB, KiCad, and FlatCAM.The book is also useful for readers keen to comprehend and then master the basic structure of HPGL, Gerber, Drill, and G-code files, as well as to have a go at deciphering them using software.

    € 29,95

    Members € 26,96

  • FNIRSI HS-01 Smart Soldering Iron (incl. 6 Soldering Tips)

    FNIRSI FNIRSI HS-01 Smart Soldering Iron (incl. 6 Soldering Tips)

    The perfect tool for quick repairs The HS-01 is a powerful, adjustable smart soldering iron with a built-in 0.87-inch OLED display that quickly reaches temperatures between 80-420°C (180-780°F). The display shows all important information, including the status of the temperature level, the set temperature, the supply voltage and the power percentage. You can set the input voltage from 9-20 V directly in the menu according to your needs. The integrated sleep mode automatically turns off the iron after 30 minutes. Features 96 W input (DC) 65 W PD power OLED display Constant temperature & fast heating CNC metal integral molding Smart safety anti-scald Mini pocket size Ergonomic design Aluminum material Left/right hand switch Efficient heat radiation Inductive sleep Color: Black Specifications Power 65 W Screen 0.87' OLED Operating voltage 9-20 VDC Power supply USB-C Temperature range 80-420°C (180-780°F) Fast charging protocol PD trigger Dimensions 184 x 20 x 20 mm (7.24 x 0.79 x 0.79') Weight 56 g Power Selection Operating voltage 20 V 15 V 12 V 9 V Operating current ≥3.25 A ≥2.5 A ≥2 A ≥1.5 A Power 65 W 37.5 W 24 W 13.5 W Tin melting time 8s 12s 17s 30s Included 1x FNRISI HS-01 smart soldering iron 6x Soldering iron tips (HS01-BC2, HS01-KR, HS01-K65, HS01-B2, HS01-ILS, HS01-BC3) 1x DC to USB-C power cable 1x Mini soldering iron stand 1x Manual Required Power adapter USB-C cable Downloads User Manual

    € 74,95

    Members € 67,46

  • OWON XDM1041 Digital Multimeter

    OWON OWON XDM1041 Multimeter

    1 review

    The OWON XDM1041 is a fast, high-precision digital True RMS benchtop multimeter with a high-resolution 3.5-inch LCD and 50,000 counts. Its DC voltage accuracy is up to 0.05% and it can measure up to 65 values per second. Features 3.5' high-resolution LCD (480x320 pixels) 55000 counts, DC voltage accuracy up to 0.05% Up to 65 readings per second Dual line display supported Trend analysis accessible in chart mode AC True RMS measurements (bandwidth: 20 Hz – 1 kHz) SCPI support: Remote control the multimeter through PC software via USB port Data record function, you can record the measured data into internal memory, and then read and process the recorded data with your computer. Specifications Measurement Range Resolution Accuracy DC Voltage 50.000 mV 0.001 mV 0.1% +10 500.00 mV 0.01 mV 0.05% +5 5.0000 V 0.0001 V 0.05% +5 50.000 V 0.001 V 0.05% +5 500.00 V 0.01 V 0.1% +5 1000.0 V 0.1 V 0.1% +10 AC Voltage 500 mV~750 V 20 Hz~45 Hz 1% +30 45 Hz~65 Hz 0.5% +30 65 Hz~1 KHz 0.7% +30 DC Current 500 uA 0.01 uA 0.15% +20 5000 uA 0.1 uA 0.15% +10 50 mA 0.001 mA 0.15% +20 500 mA 0.01 mA 0.15% +10 5 A 0.0001 A 0.5% +10 10 A 0.001 A 0.5% +10 AC Current 500 uA~500 mA 20 Hz~1 KHz 0.5% +20 5 A-10 A 1.5% +20 Resistance 500 Ω 0.01 Ω 0.15% +10 5 KΩ 0.0001 KΩ 0.15% +5 50 KΩ 0.001 KΩ 0.15% +5 500 KΩ 0.01 KΩ 0.15% +5 5 MΩ 0.0001 MΩ 0.3% +5 50 MΩ 0.001 MΩ 1% +10 Frequency 10.000 Hz~60 MHz / ±(0.2% +10) Capacitance 50 nF~500 uF / 2.5% +10 5 mF~50 mF 5% +10 Diode 3.0000 V 0.0001 V / Continuity 1000 Ω 0.1 Ω Adjustable threshold Temperature K type, PT100 Max Display 55,000 counts Data-logging Function Logging Duration 15ms~9999.999s Logging Length 1,000 points Display 3.5' TFT LCD (480x320 pixels) Power supply 230 V AC mains voltage Dimensions 200 x 88 x 150 mm Weight approx. 0.5 kg Included 1x OWON XDM1041 Multimeter 1x Power cord 2x Test leads 1x Fuse 1x USB cable 1x Manual Downloads Programming Manual PC Software

    € 109,95

    Members € 98,96

  • UNI-T UT603 LCR Meter

    Uni-Trend UNI-T UT603 LCR Meter

    The UT603 is a handheld digital inductance capacitance meter for testing resistors, capacitors and inductors. It can also be used to measure transistor parameters. This accurate meter (with 2000 counts) can be used to check electronic components in labs, production lines and maintenance facilities. Features Manual range Continuity buzzer Diode and transistor test Low battery indication Specifications Resistance (Ω) 200 Ω / 2 kΩ / 20 kΩ / 200 kΩ / 2 MΩ / 20 MΩ ±(0.8%+1) Capacitance (F) 2 nF / 20 nF / 200 nF / 2uF / 20 uF / 200 uF / 600uF ±(1%+5) Inductance (H) 2 mH / 20 mH / 200 mH / 2 H / 20 H ±(2%+8) Display counts 2000 Power 9 V battery (6F22) Display 61 x 32 mm Dimensions 172 x 83 x 38 mm Weight 312 g Included 1x UNI-T UT603 LCR meter 1x 9 V block battery 2x Test leads with alligator clips 1x Manual Downloads User manual Datasheet

    € 49,95

    Members € 44,96

Discover Elektor's measuring instruments collection

Elektor is the place for professionals and enthusiasts involved in electronics. We not only offer a source of education and inspiration, but also an extensive range of measuring instruments. These tools are essential for anyone who wants to take their projects to the next level of precision. Whether you are working on a complex design or testing a basic component, Elektor measuring instruments guarantee reliability and quality.

Essential measuring tools for your Projects

Elektor understands that good measuring instruments are the heart of every electronics project. That is why we have a wide range of oscilloscopes, multimeters, signal generators and more in our range. These tools have been carefully selected to meet the needs of both the hobbyist and the professional. With our measuring instruments you can tackle any electronics challenge with confidence.

In the rapidly changing world of electronics, it is crucial to have access to the latest technology. Our measuring instruments are equipped with the latest developments in electronics, so that you are always ahead of the curve. At Elektor you will find everything you need to support your electronics projects, from simple tools to advanced measuring equipment.

More than just measuring instruments

At Elektor it is more than just offering tools; we provide a community and a platform for knowledge sharing. In addition to measuring instruments, Elektor magazine offers ideas, information and inspiration for your next project. We are a source of innovation for electronics designers, both for professional use and for hobby projects.

Order your measuring instruments from Elektor

  • Quality and Diversity: An extensive range of high-quality measuring instruments.
  • Competitive Prices: Competitive prices with extra benefits for Elektor members.
  • Expertise and Support: Years of experience in electronics and a reliable source of knowledge and inspiration.

Prepare for success in your electronics projects with Elektor measuring instruments. Visit our collection today and find the perfect tools to suit your needs. With Elektor you choose quality, innovation and a community that is as passionate about electronics as you are.

Login

Forgot password?

Don't have an account yet?
Create an account