Measuring Tools

Siglent's SDG2000X is a series of dual-channel function/arbitrary waveform generators with specifications of up to 120 MHz maximum bandwidth, 1.2 GSa/s sampling rate and 16-bit vertical resolution. The proprietary TrueArb & EasyPulse techniques help to solve the weaknesses inherent in traditional DDS generators when generating arbitrary, square and pulse waveforms. With advantages above, SDG2000X can provide users with a variety of high fidelity and low jitter signals, which can meet the growing requirements of complex and extensive applications. Dual-channel, 40 MHz bandwidth, 20Vpp maximum output amplitude, high fidelity output with 80dB dynamic range. High-performance sampling system with 1.2GSa/s sampling rate and 16-bit vertical resolution. No detail in your waveforms will be lost. Innovative TrueArb technology, based on a point-by-point architecture, supports any 8pts~8Mpts Arb waveform with a sampling rate in range of 1μSa/s~75MSa/s. Innovative EasyPulse technology, capable of generating lower jitter Square or Pulse waveforms, brings a wide range and extremely high precision in pulse width and rise/fall times adjustment. Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, ASK and PWM. Sweep and Burst functions. High precision Frequency Counter. Standard interfaces: USB Host, USB DeviceUSBTMC, LAN (VXI-11) Optional interface: GPIB. 4.3” touch screen display for easier operation. Maximum output frequency 40 MHz Output channels 2 Sampling rate 1.2 GSa/s (4X Interpolation) Wave length CH1:16Kpts,CH2:512Kpts Frequency resolution 1μHz Vertical resolution 16bit Standard interfaces Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11) High-performance Sampling SystemBenefiting from a 1.2GSa/s and 16-bit sampling system, SDG2000X achieves extremely high accuracy performance in both time domain and amplitude, which results in more accurately reconstructed waveforms and lower distortion.Innovative EasyPulse TechnologyWhen a Square/Pulse waveform is generated by DDS, there will be a one-clock-jitter if the sampling rate is not an integer-related multiple of the output frequency. SDG2000X EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Square/Pulse waveforms. Innovative TrueArb TechnologyFor arbitrary waveforms, TrueArb not only has all the advantages of traditional DDS, but also eliminates the probability that DDS may cause serious jitter and distortion. Easy controll with 4.3” Touch Screen Display and Arbitrary Waveform Software EasyWaveThe 4.3” touch screen display, makes operation much more convenient. And EasyWave is a powerful arbitrary waveform editing software that supports several ways to generate arbitrary waveform such as manual drawing, line-drawing, equation-drawing, coordinate-drawing, etc. It is quite convenient for users to edit their own arbitrary waveforms through EasyWave.Included Siglent SDG2042X Arbitrary Function Generator User Manual Guarantee Card CD (including EasyWave 1.0 computer software system) Power Cord USB Cable Quick Start Guide

Read more less

The OWON SDS1202 2-channel oscilloscope features a high 200 MHz bandwidth, a sample rate of 1 GSa/s, an ultra-thin body and a 7-inch high resolution color LCD. The scope supports SCPI and LabVIEW. Features Bandwidth: 200 MHz 2 channels Sample rate: 1 GS/s Ultra-thin body 7-inch high resolution LCD SCPI and LabVIEW supported Specifications Bandwidth 200 MHz Sample Rate 1 GS/s Horizontal Scale (s/div) 2 ns/div - 1000 s/div, step by 1 - 2 - 5 Channel 2 Display 7' color LCD, 800 x 480 pixels Input Coupling DC, AC and GND Vertical Resolution (A/D) 8 bits (2 channels simultaneously) Vertical Sensitivity 5 mV/div - 5 V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Waveform Math ＋, －, x, ÷, invert, FFT Fuse 2A, T class, 250V Dimension (W x H x D) 301 x 152 x 70 mm Device Weight 1.10 kg Included 1x OWON SDS1202 Oscilloscope 1x Probe 1x Probe adjust 1x Power cord 1x USB cable 1x CD-ROM 1x Quick guide Downloads Datasheet User manual PC software SCPI commands

Read more less

Free up your hands and secure and protect your soldering projects with Weller's Helping Hands with 4 Magnetic Arms. Enjoy adjustable and flexible positions with magnetic gooseneck arms with alligator clamps that are easily positionable for multiple configurations. Applications Hobby Home repair Drone Audio repair Joining wires Engraving Jewelry making Electronics Specifications Dimensions (Base) 152 x 229 mm (6 x 9') Length (Arms) 2 arms: 216 mm (8.5')2 arms: 317 mm (12.5')

Read more less

Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the FI allow flexible use of this instrument. FI testers allow a fault current to flow and determine at which fault current the FI reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated switch. 3-digit LCD display with backlight Normal (N) or Selective (S) -type RCD test Applicable measurement standards: IEC 61557-6, NF EN 61557-6, VDE 0413-6 Accessories: Carrying case, Test leads, Batteries and User manual Technical Specifications Nominal test current 10/30/100/500/1000mA Current selection 0.5x, 1x, 2x, 5x nominal current Trip time 10-2000 ms at 0.5 x 10-500 ms at 1x 10-150 ms at 2x 10-40 ms at 5x Ramp test 0.4 x to 1.4 times nominal rated current RCD Types Type-A, Type-AC Operation voltage 6 x 1,5 V AA (UM-3) batteries Dimensions (WxHxD) 92 x 200 x 50 mm Weight 700 g

Read more less

Do you need a way to connect the top and bottom layers? Rivets are the key!Rivets are little copper tubes that make a mechanical connection between the top and bottom layer. We found rivets to be the easiest way to create vias. Be sure to pick up the corresponding rivet tool if you don't have one! Pack of 200 Inner Diameter - 1.0mm Head Diameter - 2.2mm Drill Size: 1.5mm (or 1.6mm) Confused on how to use them? Checkout our tutorial here.

Read more less

Solder Paste Dispensing and Reflow All-in-One The Voltera V-One creates two-layer prototype circuit boards on your desk. Gerber files go in, printed circuit boards come out. The dispenser lays down a silver-based conductive ink to print your circuit right before your eyes. Assembling traditional and additive boards is easy with the V-One’s solder paste dispensing and reflow features. Simply mount your board on the print bed and import your Gerber file into Voltera’s software. No more stencils required Voltera’s software is designed to be understood easily. From importing your Gerber files to the moment you press print, the software safely walks you through each step. Compatible with EAGLE, Altium, KiCad, Mentor Graphics, Cadence, DipTrace, Upverter. The V­-One Desktop PCB Printer includes all accessories and consumables needed to get started: Consumables 1 Conductor 2 cartridge 1 Solder Paste cartridge 10 2'x3' FR4 substrates 6 3'x4' FR4 substrates 10 2'x3' FR1 substrates 6 3'x4' FR1 substrates 25 Disposable 230 micron nozzles 1 Burnishing pad 1 Solder wire spool 1 Drill bit set 200 0.4 mm rivets 200 1.0 mm rivets 2 Rivet tools 1 Sacrificial layer 1 Hello World starter kit 1 Punk Console starter kit Accessories 2 Substrate clamps and thumbscrews 2 Dispensers with caps 1 Probe 1 Drill 1 Set of safety glasses 1 Voltera anti-static tweezers Downloads Specifications V-One Software User Manuals Safety Datasheets Technical Datasheets Voltera CAM file for EAGLE Substrates and Templates More Info Frequently Asked Questions More from the Voltera community Technical Specifications Printing Specifications Minimum trace width 0.2 mm Minimum passive size 1005 Minimum pin-to-pin pitch (conductive ink) 0.8 mml Minimum pin-to-pin pitch (solder paste) 0.5 mml Resistivity 12 mΩ/sq @ 70 um height Substrate material FR4 Maximum board thickness 3 mm Soldering Specifications Solder paste alloy Sn42/Bi57.6/Ag0.4 Solder wire alloy SnBiAg1 Soldering iron temperature 180-210 °C Print Bed Print area 135 x 113.5 mm Max. heated bed temperature 240 °C Heated bed ramp rate ~2°C/s Footprint Dimensions 390 x 257 x 207 mm (L x W x H) Weight 7 kg Computing Requirements Compatible operating systems Windows 7 or higher, MacOS 10.11 or higher Compatible file format Gerber Connection type Wired USB Certification EN 61326-1:2013 EMC requirements IEC 61010-1 Safety requirements CE Marking Affixed to the Voltera V-One printers delivered to European customers Designed and assembled in Canada. More technical information Quickstart Explore Flexible Printed Electronics on the V-One Voltera V-One Capabilities Reel Voltera V-One PCB Printer Walkthrough Unpacking V-One: Solder Paste Dispensing and Reflow All in One Voltera @ Stanford University's Bao Research Group: Robotic Skin and Stretchable Sensors Voltera @ Princeton: The Future of Aerospace Innovation

Read more less

The PCW03A True RMS digital multimeter is an innovative tool for any electrician, technician, or ambitious hobbyist. It can measure AC/DC voltage, current, and resistance, as well as frequency, duty ratio, and temperature. Due to its smart measurement function, the PCW03A detects the inteded measurement (continuity, voltage, resistance) and chooses the correct measurement range/function for the user, making super easy to use and beginner-friendly. Another great feature of the device, especially for beginners, are the illuminated input sockets. Here the device indicates which input sockets to use for the chosen measurement function. This way it is almost impossible to connect the measurement leads to the wrong socket and it will prevent the device from damage. With its 9999 counts and bright colors, the HD display provides precise measurement read-outs. Additionally, the CAT III 1000V; CAT IV 600V rating ensures safety while in use for various applications. Its smartphone-like design is easy and intiutive to use, making it a joy for daily operations. The double insulation, ceramic fuse, and removable rubber casing provide durability and protection for device and the user. Features CAT III 1000V; CAT IV 600V 9999 counts & True RMS Auto Range & smart measurement function: device automatically recognizes intended measurement (continuity, voltage, resistance) and chooses correct measurement range/function LED illuminated input sockets – the device shows you which input socket to use according to the measurement function chosen. Perfect for beginners to avoid damage to the device. AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty ratio, and temperature measurement NCV (non-contact voltage detection), live line, continuity, and diode test Double insulation & ceramic fuses Removable rubber casing with cushioning function for extra protection Large colour HD display with backlight Data hold with Min/Max function LED work light Innovative design and 5 button operating concept: like a smartphone Great packaging design and manual with pictures in various languages: EN, GER, ES, FR, PT, IT, GR Dimensions: 165 x 85 x 25 mm Weight: 255 g Included PCW03A Multimeter Batteries High-quality test leads K-type temp. probes Transport case

Read more less

UT196 True RMS solar digital multimeter is an ideal tool for solar power system maintenance. This rugged meter is designed for technicians who work in rugged outdoor environments. UT196 can measure up to 1700 V DC and 1500 V AC voltages, and 3000 A AC current with an external current clamp sensor. This solar meter offers IP65 protection and able to withstand 2 m drop as well. UT196 solar digital multimeter is designed with 1700 V DC, 1500 Vrms AC overload protection and tested for safe usage in CAT III 1000 V, CAT IV 600 V environments. Features True RMS Measure up to 1700 V DC and 1500 V AC for high voltage applications e.g. solar array, wind IP65 protection CAT III 1000V, CAT IV 600 V Analog bar Frequency response: 45 Hz~1 kHz Low-pass filter function Low impedance mode Built-in flashlight, bright backlight and visual alarm Applications High DC voltage measurement Output voltage and frequency measurement Voltage and frequency measurement Current and frequency measurement Specifications Range UT196 DC voltage (V) 1700 V ±0.2% +5 AC voltage (V) 1500 V ±0.8% +3 Frequency (Hz) 1 MHz ±0.08% +4 Resistance (Ω) 60 MΩ ±0.8% +2 Capacitance (F) 60 mF ±1.9% +5 Power 9 V battery Dimensions 195 x 95 x 58 mm Included UT196 Solar Digital Multimeter Battery Test leads Downloads Datasheet Manual

Read more less

This tool set contains essential tools for all kinds of electronic work. Included Soldering iron Desoldering pump Precision screwdriver 2.5x75 mm Screwdriver 3x75 mm Screwdriver 5x75 mm Screwdriver 6x125 mm Long nose plier (5') Diagonal cutting plier (4.5') IC extractor Wire stripper & cutter Multimeter Hex key wrench Soldering wire Component storage box Tweezers (Long nose) Bag size: 340 x 210 x 50 mm

Read more less

Simply switch on and solder with the new WE1010 soldering station. Weller has developed a new soldering station especially for education, professional users and cable assembly. Features 70W solder iron with ergonomic handle and providing toolless tip change ESD safe station, iron and heat-resistant silicon cable for safe handling Using ET soldering tips Standby mode and auto setback conserves energy, protects equipment Password-protected to preserve settings 170MN general purpose shear cutter, diagonal, flush. The greatly reduced mechanical shock delivered to the component, ESD safe WSW solder wire; all-purpose solder wire with excellent wetting properties Specifications Dimensions L x W x H (mm): 150 x 120 x 98 mm (5.91 x 4.72 x 3.86') Weight (approx.) in kg: 3.07 Voltage: 230 V Channels: 1 Temperature range (depends on tool) °C: 100 - 450 Temperature range (depends on tool) °F: 200 - 850 Temperature accuracy °C: Average tip temperature can be „offset“ to +/- 5°C at idle with no load Temperature accuracy °F: Average tip temperature can be „offset“ to +/- 9°F at idle with no load Temperature stability °C: ± 6 Temperature stability °F: ± 10 Heating time (approx.) in seconds (50–350 °C/120–660 °F): 28 sec. Power: 85 W Included Power unit 1-channel 70 W with soldering iron WEP 70 and safety rest PH 70 Shearcutter 170 mn WSW SCN M1 Solder Wire 100 g Soldering Tips ETA 1,6 mm, ETB 2,4 mm

Read more less

Get ready to start soldering kits thanks to this all-inclusive tool set!Want to start soldering gadgets, or do you want to fix some home appliances, but you don't know what tools to get? Then this is the perfect set for you! It includes all the basic tools and practical necessities to start your journey as an electronics engineer or maker!Included AS19: Silicone soldering mat (350 x 250 mm) Lead-free solder Sn 99.3% – Cu 0.7% with dispenser (1.0 mm, 15 g) Desolder: Desoldering braid Stand20: Universal soldering iron stand VT281: Side cutter pliers VTD7: Powerful desoldering pump VTHHN: Helping hand with magnifier VTSI30C: High-Q ceramic soldering iron 30 W / 220-240 VAC

Read more less

SP209 series logic analyzers rely on ScanaStudio software (runs Windows, Mac and Linux) to capture, display, analyze and decode signals. Most industry standard protocols can be interpreted, among which: SPI, I²C, USART, 1-Wire, CAN, LIN, IC, RS232, RS485, TWI and much more (click for full list of supported protocol decoders) Features 9 logic channels with adjustable thresholds (1.8 V, 2.5 V, 3.3 V, 5 V) State of the art input stage, with Schmitt triggers that eliminate glitches on slow signals 200 MHz sampling rate, with all 9 channels used. External clock option (state mode), up to 50 MHz Precise trigger-In and trigger-Out signals on SMA ports Samples compression and streaming via USB. 2 GB DDR-3 memory kicks-in when USB isn't fast enough. Guaranteed performances on all hosts. SP series logic analyzers compress and stream captured signals via USB 2.0 to a Windows, Linux or MacOS machine. USB bandwidth can be variable from a system to another and is practically limited to 20 MB/s. That's why SP logic analyzers have an embedded 2 GB DDR-3 memory that buffers captured samples at 1.6 GB/s, overcoming USB limitations. Trigger options Edge trigger Logic change on one or various channels Trigger on a sequence of timed logic signals Trigger on a protocol word or event (like serial word or I²C address acknowledge) External trigger input Trigger output Dual stage trigger (Ex: Edge trigger, then, Trigger on I²C address). Typical applications Designed for performance, SP series logic analyzers offer the possibility to capture and analyze 9 channels of logic signals and industrial buses at a rate of 200 MHz. This is perfectly adapted for demanding applications, where it is needed to capture logic signals with maximum resolution on all 9 channels. Embedded systems development and debugging Research and educational Serial protocols analysis, like I²C, SPI, UART or 1-Wire (non-exhaustive list) Industrial bus analysis: RS232, RS485, CAN, LIN ADC (Analog to Digital Converter) diagnostic Reverse engineering ScanaStudio application packs all the features you need to capture, measure and analyze analog signals. It's available free of charge for the major platforms below. The application is regularly updated, please check the release notes here ScanaStudio can be downloaded free of charge here. All decoders are free and open source and accessible in the GitHub repository.

Read more less

Auto scan pen meter in a set of tweezers for SMD measure precise and fast small ship components, ideal for use in the service- and education-fields. 3 5/6 digit, 11 mm LCD-display; max. 5999 Low battery indication and auto power off Automatic recognize resistance, capacitance and diode, continuity test Measure high resistance and capacitance quickly Accessories: batteries and manual Specifications Resistance 600 Ω/6/60/600 kΩ/6/60 MΩ; ± 1,2% + 2 dgt. Capacitance 6/60/600 nF/6/60/600 µF/6/60 mF; ± 3,0% + 3 dgt. Auto scan mode 600 Ω ~ 6 MΩ / 400 pF ~ 600 µF Operation voltage 2 x 1,5 V AG13 button cells Dimensions (WxHxD) 181 x 35 x 20 mm Weight 65 g

Read more less

The powerful soldering station with LCD panel has been designed for a wide temperature range (from 150-450°C) and is ideal for general purpose soldering as well as specialized lead-free soldering applications. The soldering iron is controlled automatically by the microprocessor. With its high-quality sensor the heat exchange system guarantees precise temperature control at the soldering tip. This digital temperature controlled soldering station includes a holder and cleaning sponge. Specificaties Operating voltage 220-240 V, 50 Hz Power consumption 80 W Soldering iron power 48 W Operating voltage soldering iron 24 V Temperature (adjustable) 150-450°C Dimensions 195 x 87 x 165 mm

Read more less

This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit designs allow units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action (coarse and fine set) control knobs make tuning the voltage and current level ever so smooth, precise and fast, due to the rotary encoder and microprocessor control. Setting the CC current limiting can be done in open circuit at output poles. The three user defined presets of voltage and current limiting levels facilitate quick access to frequently used Volt/Ampere settings. The full remote control functionality offer a wide range of operation possibilities for the industrial and more sophisticated users. High RFI immunity and excellent EMI Over load, Over Temperature and Tracking Over Voltage protections 3 user defined, recallable settings for voltage and current values Full Remote control of voltage and current and output control on and off Isolated ground, Active PFC and high power efficiency, Intelligent fans control from zero to full speed Rotary Encoder Control Knob with coarse and fine tuning Safety: EN 61010-1, EN 60950-1 Accessories: power cable and manual Display 3-digit 15 mm green LED-display Output voltage 1 ~ 16 V DC adjustable Output current 40 A / 5 A (main output (rear panel) / front output) Output power 640 W Residual ripple 5 mV rms Efficiency > 85,5 % Operation voltage 200 ~ 240 V AC; 50/60 Hz Dimension (WxHxD) 200 x 90 x 255 mm Weight 2.6 kg

Read more less

The OWON DGE3062 is a 14-bit function generator with a bandwidth of 60 MHz. It has 5 basic waveforms, 160 built-in arbitrary waveforms and the following comprehensive modulation functions: AM, FM, PM, PWM, FSK, 3FSK, 4FSK, PSK, ASK, BPSK, OSK, DSBAM, QPSK, SUM, sweep, Burst.Features Max. 60 MHz frequency output, 300 MSa/s Sample rate 14 bits Vertical Resolution, 100K Arb waveform length Comprehensive waveform output: 5 basic waveforms, and 160 built-in arbitrary waveforms Comprehensive modulation functions: AM, FM, PM, PWM, FSK, 3FSK, 4FSK, PSK, ASK, BPSK, OSK, DSBAM, QPSK, SUM, sweep, Burst SCPI and LabVIEW supported 3.6 inch LCD (480 x 272 pixels) Specifications Channel 2 Frequency Output 60 MHz Sample Rate 300 MSa/s Vertical Resolution 14 bits Waveform Standard Waveform Sine, square, pulse, ramp, noise Arbitrary Waveform Exponential rise, exponential fall, sin(x)/x, step wave, and others, total 160 built-in waveforms Frequency (resolution 1 μHz) Sine 1 μHz-60 MHz Square 1 μHz ~ 20 MHz Pulse 1 μHz ~ 20 MHz Ramp 1 μHz ~ 2 MHz Noise 20 MHz (-3 dB, typical) Arbitrary Waveform 1 μHz ~10 MHz Arbitrary Waveform Length 2 points – 100K points Sample Rate 300 MSa/s Amplitude Into 50Ω load 1mVpp ~ 10Vpp (≤10Hz), 1mVpp ~ 5Vpp (≤60 MHz) DC Offset Range (AD+DC ±(10 Vpk – Amplitude Vpp/2) high resistance±(5 Vpk – Amplitude Vpp/2) 50 Ω DC offset resolution 1 mV or 4 digits Load Impedance 50 Ω (typical) DC offset Accuracy ±(1% of |setting| + 1 mV + amplitude Vpp * 0.5%) Modulation Type AM,FM, PM, PWM, FSK, 3FSK, 4FSK, PSK, ASK, BPSK, OSK, DSB-AM, QPSK, SUM, Sweep, Burst Frequency Counter Function Frequency, period Frequency Range 100 MHz ~ 100 MHz Frequency Resolution 6 digits Input/Output Display 3.6” LCD Input mode External modulation input, external trigger input, external reference clock input/output Communication Interface USB Host, USB Device Mechanical specifications Dimensions (W x H x D) 200 x 92 x 157 mm Weight 0.8 kg Included 1x OWÒN DGE3062 1x Power Cord 1x Quick Guide 1x USB Cable 1x Q9 Cable 1x BNC to Alligator Clip Downloads Quick Guide User Manual Software

Read more less

Features Advanced DDS technology, up to 5 MHz frequency output 125 MS/s sample rate and 1 μHz frequency resolution Vertical Resolution: 14 bits and 8K arb waveform length Comprehensive waveform output: 5 basic waveforms and 45 built-in arbitrary waveforms SCPI and LabVIEW supported 4'' high resolution (480 x 320 pixels) LCD Could work with OWON SDS Series DSO smoothly Please note: The photos show 3 additional buttons (Mod, Sweep, Burst) that are not available on the currently available version of the device Specifications Channel Single + Trigger Frequency Output 5 MHz Sample Rate 125 MS/s Vertical Resolution 14 bits Waveform Standard Waveform Sine, Square, Pulse, Ramp, and Noise Arbitrary Waveform Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, and others, total 45 built-in waveforms, and user-defined arbitrary waveform Frequency (resolution 1 μHz) Sine 1 μHz - 5 MHz Square 1 μHz - 5 MHz Pulse 1 μHz - 5 MHz Ramp 1 μHz - 1 MHz Noise 5 MHz (-3 dB) (typical) Arb 1 μHz - 5 MHz Amplitude Amplitude 1 m Vpp - 12.5 Vpp (50 Ω) 1 m Vpp - 25 Vpp (high impedance) Resolution 1 m Vpp, or 4 digits DC Offset Range (AD+DC) ±6.25 V (50 Ω), ±12.5 V (high impedance) DC Offset Range Resolution 1 mV, or 4 digits Load Impedance 50 Ω (typical) Arbitrary Waveform Wave Length 2 pts to 8K pts Sample Rate 125 MS/s Vertical Resolution 14 bits Non-volatile Memory 64 M bytes Input / Output Display 4' (480 x 320 pixels) LCD Type External reference clock input Communication Interface USB device Mechanical Dimension (W x H x D) 235 x 110 x 295 mm Device Weight 3 kg

Read more less

The ZD-8951 is a 3-in-1 temperature-controlled digital soldering station with built-in fume extractor and LED lighting. The rapid-heating function reaches a temperature of 400°C in less than 1 minute. Specifications (Soldering Iron) Power: 60 W (max. 130 W) Temperature range: 160°C to 480°C (320°F to 896°F) PTC rapid heating element With °C/°F conversion function Temperature can be easily adjusted with the knob. LCD display with changing backlight. With rapid heating function, it takes less than 1 minute to rise from the room temperature to 400°C (752°F). Specifications (Fume Extractor) Power: 23 W Air flow: 1 m³/min (max) Specifications (LED Light) Power: 5 W Lighting: 12 LEDs Brightness: 242 lm

Read more less

The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions.As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness.In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.Through these many technical qualities, this device is suitable for the outdoor use of every electrician, technician and engineer in the service, construction or industrial sector.Features Automatic illuminated functions keys and rotary switch Integrated powerful LED Flashlight Bleutooth 4.0 interface for data transfer to Android or iOS smartphones TrueRMS measurement ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z) 3 5/6-digits measurement value display (max. 5999) LCD-Display with Relative-value measurement and 42-segment bargraph Continuity with buzzer and diode-test Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %) Heavy Duty Case, IP67 dust- and waterproof Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V Accessories: Carrying case, Test Leads, K-type Specifications DCV 600 mV / 6 / 60 / 600 / 1000 V +/-0,8% + 5 dgt. ACV + DCV @ 10 MΩ 6 / 60 / 600 / 1000 V +/-1,5% + 20 dgt. ACV + DCV @ 3 kΩ (LO Z) 6 / 60 / 600 / 1000 V +/-3% + 30 dgt. ACV + DCV Frequency range 50 Hz … 400 Hz ACV 6 / 60 / 600 / 1000 V +/-1% + 5 dgt. ACV Frequency range 50 Hz … 1000 Hz DCA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt. ACA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt. ACA Frequency range 50 Hz … 400 Hz Ohm 600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,5% + 5 dgt. Capacitance 60 / 600 nF / 6 / 60 / 600 / 6000 µF +/-3% + 5 dgt. Frequency 10 Hz … 10 kHz +/- 1,0% + 5 dgt. Temperature 20.0 °C … +760 °C +/-1,0% + 5 °C Interface Bluetooth 4.0 Low Energy Operating Voltage 4 x 1,5 V AAA Batteries Dimensions (WxHxD) 75 x 170 x 50 mm Weight 400 g

Read more less

The DS213 is a '5-track, 4-wave-line' oscilloscope with digital storage for general electrotechnical tasks and is based on an ARM Cortex-M3 core. The DS213 uses an FPGA to control the external A/D Converter and manage the data cache. It provides 4 partitions for applications to load and upgrade up to 4 different firmware versions. It also has a built-in 8 MB USB flash drive for storing waveforms and upgrading the firmware. The application layer of the oscilloscope code is open source, and users can develop firmware for the oscilloscope according to their own needs. Features Mini size, light weight, portable and handheld. It can store waveforms, making waveform analysis clearer and more effective. Multiple trigger modes, support Ascend/Descend Edge Trigger, Positive/Negative Pulse Trigger, and Logic Trigger. Powerful ability to process waveforms, it can automatically measure parameters such us voltage, frequency and pulse width. Specifications Analoge bandwidth 15 MHz Sampling rate 100 MSa/s CPU ARM Cortex-M3 FIFI & control FPGA ADC HWD9288-100 Analog channels 2 ([CH_A] [CH_B] Digital channels 2 ([CH_C] [CH_D] Analog input impedance 1 MΩ Max input voltage ±40 V (X1 probe)±400 V (X10 probe) Coupling AC/DC Vertical sensitivity 10 mv/Div~10 V/Div (1-2-5 steps) Horizontal sensitivity 100 nS/Div~1 S/Div (1-2-5 steps) Vertical resolution 8 bits Standaard digital channel input impedance 100 KΩ Max digital channel input voltage +5 V Trigger types Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger Trigger modes Auto, Normal, Single, Slow Trigger source [CH_A] [CH_B] [CH_C] [CH_D] Storage Built-in 8 MB U disk storage for waveform data and images Power supply Internal 1000 mAh Lithium battery, external Micro USB port Display 2.8' Full Color TFT LCD (240x400 pixels) Dimensions 99.5 x 59 x 13.5 mm Weight 129 g (with battery) Included 1x DS213 Mini Oscilloscope 2x Probes 1x Date line 1x Allen key 1x USB cable 1x User manual Downloads Manual App Schematics

Read more less