Measuring Tools

29 products


  •  -20% OWON SDS1102 2-kanaals Oscilloscoop (100 MHz)

    OWON OWON SDS1102 2-ch Oscilloscope (100 MHz)

    OWON SDS1102 is an affordable desktop digital oscilloscope with top features: 2-channel device with 100 MHz bandwidth, 1 GSa/s sample rate, 7' LCD display and 10 K pts wavelength. OWON SDS1102 has a simplified synchronization system which supports two trigger types: level and edge. Designed to solve problems that do not require large amounts of memory and difficult trigger types. Features Bandwidth: 100 MHz 2 channels Sample rate: 100 MS/s Ultra-thin body 7-inch high resolution LCD SCPI and LabVIEW supported Specifications Bandwidth 100 MHz Horizontal Scale (s/div) 5 ns/div – 1000 s/div Channel 2 Vertical Sensitivity 5 mV/div – 5 V/div (at input) DC Gain Accuracy 3% Vertical Resolution (A/D) 8 bits (2 channels simultaneously) Input Input Impedance 1 MΩ, 10 pF Input Coupling AC, DC, GND Max Input Voltage ±400 V, CATI, CATII Passive probes х1; х10 Probe Attenuation Factor х1; х10; х100; х1000 Trigger System Trigger Mode Auto, Normal, Single Trigger Type Edge, Video Edge Trigger Source CH1, CH2 Video Trigger Sampling Type real-time Sample Rate 1 GSa/s Equivalent Sample Rate No Wavelength 10K pts Interpolation sin(x)/x Measurement and Mathematical Treatment System Automatic Measurement Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shootRise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A→B, Delay A→B, area, cycle area Math Functions Addition, Subtraction, Multiplication, Division, FFT General Characteristics Display type 7' color LCD Display Resolution 800 x 480 Power 100-240 V, 45-440 Hz, <15 W Dimensions 301 x 70 x 152 mm Weight 1.1 kg Included 1x OWON SDS1102 Oscilloscope 2x Oscilloscope probe 1x Probe Adjust 1x Mains power cord 1x USB Cable 1x CD-Rom 1x Quickstart Guide Downloads User manual Datasheet

    € 249,00€ 199,00

    Members identical

  • OWON XDM1041 Digital Multimeter

    OWON OWON XDM1041 Multimeter

    1 review

    The OWON XDM1041 is a fast, high-precision digital True RMS benchtop multimeter with a high-resolution 3.5-inch LCD and 50,000 counts. Its DC voltage accuracy is up to 0.05% and it can measure up to 65 values per second. Features 3.5' high-resolution LCD (480x320 pixels) 55000 counts, DC voltage accuracy up to 0.05% Up to 65 readings per second Dual line display supported Trend analysis accessible in chart mode AC True RMS measurements (bandwidth: 20 Hz – 1 kHz) SCPI support: Remote control the multimeter through PC software via USB port Data record function, you can record the measured data into internal memory, and then read and process the recorded data with your computer. Specifications Measurement Range Resolution Accuracy DC Voltage 50.000 mV 0.001 mV 0.1% +10 500.00 mV 0.01 mV 0.05% +5 5.0000 V 0.0001 V 0.05% +5 50.000 V 0.001 V 0.05% +5 500.00 V 0.01 V 0.1% +5 1000.0 V 0.1 V 0.1% +10 AC Voltage 500 mV~750 V 20 Hz~45 Hz 1% +30 45 Hz~65 Hz 0.5% +30 65 Hz~1 KHz 0.7% +30 DC Current 500 uA 0.01 uA 0.15% +20 5000 uA 0.1 uA 0.15% +10 50 mA 0.001 mA 0.15% +20 500 mA 0.01 mA 0.15% +10 5 A 0.0001 A 0.5% +10 10 A 0.001 A 0.5% +10 AC Current 500 uA~500 mA 20 Hz~1 KHz 0.5% +20 5 A-10 A 1.5% +20 Resistance 500 Ω 0.01 Ω 0.15% +10 5 KΩ 0.0001 KΩ 0.15% +5 50 KΩ 0.001 KΩ 0.15% +5 500 KΩ 0.01 KΩ 0.15% +5 5 MΩ 0.0001 MΩ 0.3% +5 50 MΩ 0.001 MΩ 1% +10 Frequency 10.000 Hz~60 MHz / ±(0.2% +10) Capacitance 50 nF~500 uF / 2.5% +10 5 mF~50 mF 5% +10 Diode 3.0000 V 0.0001 V / Continuity 1000 Ω 0.1 Ω Adjustable threshold Temperature K type, PT100 Max Display 55,000 counts Data-logging Function Logging Duration 15ms~9999.999s Logging Length 1,000 points Display 3.5' TFT LCD (480x320 pixels) Power supply 230 V AC mains voltage Dimensions 200 x 88 x 150 mm Weight approx. 0.5 kg Included 1x OWON XDM1041 Multimeter 1x Power cord 2x Test leads 1x Fuse 1x USB cable 1x Manual Downloads Programming Manual PC Software

    € 109,95

    Members € 98,96

  •  -17% OWON XDM1141 Multimeter

    OWON OWON XDM1141 Multimeter

    The OWON XDM1141 is a fast, high-precision digital True RMS benchtop multimeter with a high-resolution 3.5-inch LCD and 50,000 counts. Its DC voltage accuracy is up to 0.05% and it can measure up to 65 values per second. Features 3.5' high-resolution LCD (480x320 pixels) 55000 counts, DC voltage accuracy up to 0.05% Up to 65 readings per second Dual line display supported Trend analysis accessible in chart mode AC True RMS measurements (bandwidth: 20 Hz – 1 kHz) SCPI support: Remote control the multimeter through PC software via USB port Data record function, you can record the measured data into internal memory, and then read and process the recorded data with your computer. Specifications Measurement Range Resolution Accuracy DC Voltage 50.000 mV 0.001 mV 0.1% +10 500.00 mV 0.01 mV 0.05% +5 5.0000 V 0.0001 V 0.05% +5 50.000 V 0.001 V 0.05% +5 500.00 V 0.01 V 0.1% +5 1000.0 V 0.1 V 0.1% +10 AC Voltage 500 mV~750 V 20 Hz~45 Hz 1% +30 45 Hz~65 Hz 0.5% +30 65 Hz~1 KHz 0.7% +30 DC Current 500 uA 0.01 uA 0.15% +20 5000 uA 0.1 uA 0.15% +10 50 mA 0.001 mA 0.15% +20 500 mA 0.01 mA 0.15% +10 5 A 0.0001 A 0.5% +10 10 A 0.001 A 0.5% +10 AC Current 500 uA~500 mA 20 Hz~1 KHz 0.5% +20 5 A-10 A 1.5% +20 Resistance 500 Ω 0.01 Ω 0.15% +10 5 KΩ 0.0001 KΩ 0.15% +5 50 KΩ 0.001 KΩ 0.15% +5 500 KΩ 0.01 KΩ 0.15% +5 5 MΩ 0.0001 MΩ 0.3% +5 50 MΩ 0.001 MΩ 1% +10 Frequency 10.000 Hz~60 MHz / ±(0.2% +10) Capacitance 50 nF~500 uF / 2.5% +10 5 mF~50 mF 5% +10 Diode 3.0000 V 0.0001 V / Continuity 1000 Ω 0.1 Ω Adjustable threshold Temperature K type, PT100 Max Display 55,000 counts Data-logging Function Logging Duration 15ms~9999.999s Logging Length 1,000 points Display 3.5' TFT LCD (480x320 pixels) Dimensions 200 x 88 x 150 mm Weight approx. 0.5 kg Included 1x OWON XDM1141 Multimeter 1x Power cord 2x Test leads 1x Fuse 1x USB cable 1x Manual Downloads Programming Manual PC Software

    € 144,95€ 119,95

    Members identical

  • OWON XDM2041 Digital Multimeter

    OWON OWON XDM2041 Multimeter

    The OWON XDM2041 is an extremely low-cost, high-precision benchtop multimeter. The meter has a True RMS function to measure the AC voltage and current and it has a reading speed of up to 65 values per second. Also, the XDM2041 is equipped with functions such as measuring 2-wire and 4-wire resistance.The XDM2041 is able to store data internally in the memory of the meter and display it on the 3.7' high-resolution LCD display. Up to 1000 points can be stored and the time interval can be varied from 15ms to 9999s. By means of the RS232 port on the back of the device, the meter can be programmed and controlled via SCPI.Specifications Measuring Properties Measurement Range Precision DC voltage 0.001 mV - 1000 V ±0.1%±10 True RMS Voltage AC 1 mV - 750 V ±2.0%±0.10 Current DC 0.01 µA - 10 A ±0.15%±20 True RMS Current AC 1 µA - 10 A ±0.5%±20 Resistance 0.01 Ω - 5 MΩ ±0.1%±10 Capacity 1 nF - 50mF ±2.5%±5 Frequency 0.001 Hz - 60 MHz ±0.2%±8 Diode Test 1000 Ω Temperature Thermocouple Other functionality Max, Min, Average, REL_%, dBm/dB, Pass/Fail, Table Data logger function Duration: 5 ms - 9999sLength: 1 kPts Digits 4 ⅘ digits Display 3.7' LCD Connectivity RS232 Dimensions 235 mm x 110 mm x 295 mm Weight 3.06 kg For more information, check out the User Manual here.You can find the PC software here.

    € 154,95

    Members € 139,46

  • OWON HDS272S 2-kanaals oscilloscoop (70 Mhz) + Multimeter + Signaalgenerator

    OWON OWON HDS272S 2-ch Oscilloscope (70 MHz) + Multimeter + Signal Generator

    The OWON HDS272S is the perfect solution all-in-one solution! Oscilloscope, multimeter and waveform generator in the same battery-powered device, to work on the go. Features Oscilloscope + multimeter + waveform generator, multifunction in one 3.5-inch high-resolution, high-contrast colour LCD display, suitable for outdoor use 18650 lithium battery, comprehensive power consumption ≤3 W, can work continuously for about 6 hours USB Type-C interface, support power bank, support PC software connection Self-calibration function SCPI supported, facilitate secondary development Specifications Oscilloscope Bandwidth 70 MHz Channels 2-ch Oscilloscope + 1-ch Generator Sample Rate 250 MSa/s Acquisition Model Normal, Peak detect Record Length 8K Display 3.5-inch LCD Waveform Refresh Rate 10,000 wfrms/s Input Coupling DC, AC, and Ground Input Impedance 1 MΩ ±2%, in parallel with 16pF±10pF Probe Attenuation Factors 1X,10X,100X,1000X,10000X Max. input Voltage 400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation) Bandwidth Limit (typical) 20 MHz Horizontal Scale 5 ns/div - 1000 s/div, step by 1 - 2 - 5 Vertical Sensitivity 10 mV/div - 10 V/div Vertical Resolution 8 bits Trigger Type Edge Trigger Modes Auto, Normal, single Automatic Measurement Period, Frequency, Mean, PK-PK, Max, Min Cursor Measurement ΔV, ΔT, ΔT& ΔV between cursors Communication Interface USB Type-C Multimeter Max. Resolution 20,000 counts Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test Input Impedance 10 MΩ Max Input Voltage AC: 750 V | DC: 1000 V Max Input Current DC: 10 A | AC: 10 A Diode 0-2 V Waveform Generator Frequency Output Sine 0.1 Hz - 25 MHz Square 0.1 Hz - 5 MHz Ramp 0.1 Hz - 1 MHz Pulse 0.1 Hz - 5 MHz Arbitrary 0.1 Hz - 5 MHz Sampling Rate 125 MSa/s Channel 1-ch Amplitude Range 20 mVpp - 5 Vpp Waveform Length 8K Vertical Resolution 14 bits Output Impedance 50Ω Downloads User Manual for HDS200 Series SCPI Protocol for HDS200 Series Quick Guide for HDS200 Series PC Software for OWON HDS200 Series

    € 229,00

    Members € 206,10

  • OWON VDS1022I 2-ch USB-oscilloscoop (25 MHz)

    OWON OWON VDS1022I 2-ch USB Oscilloscope (25 MHz)

    OWON VDS1022I 2-channel USB oscilloscope (25 MHz) is a oscilloscope for use with a computer. It is powered by USB and has a small size, making it easy to take it with you. The oscilloscope is very economical. It has a shielded USB connection, reducing interference and protecting the computer against over-voltage. The multi port on the scope can be used for external triggering, trigger out or Pass / Fail output. Features 25 MHz bandwidth, and max 1 GS/s real-time sample rate 10M record length Friendly UI: FFT, or X-Y, and waveform 2 views displayed on the same screen Multi-trigger option: edge, video, slope, pulse, and alternate USB isolation – less signal inference, more PC protection USB bus powering, and LAN remote control (optional) Ultra-thin body design, easy portability Specifications Bandwidth 25 MHz Channel 2+1 (multi) Sample Rate 100 MSa/s Horizontal Scale (s/div) 5 ns/div~100s/div, step by 1~2~5 Record Length 5K Max Input Voltage 400 V (PK - PK) (DC+AC, PK - PK) 40 V (PK - PK) (DC+AC, PK - PK) Vertical Resolution (A/D) 8 bits (2 channels simultaneously) Model VDS1022I Vertical Sensitivity 5 mV/div~5 V/div Trigger Type Edge, Pulse, Video, Slope, and Alternate Trigger Mode Auto, Normal, and Single Acquisition Mode Sample, Peak Detect, and Average Waveform Math +, -, ×, ÷, invert, FFT Communication Interface USB 2.0 (isolation) Multi-function Interface Signal Type Level Standard TTL Power Supply 5.0 V/1 A Power Consumption ≤2.5 W Dimensions (W × H × D) 170 x 120 x 18 mm Weight 0.26 kg Included 1x OWON VDS1022I oscilloscope 1x CD-ROM 1x Quick start guide 2x Oscilloscope probe 1x Probe tool 1x Power adapter 1x USB cable 1x Silicone case protectors 1x Power cable Downloads Datasheet User manual SCPI protocol USB driver

    € 119,95

    Members € 107,96

  • OWON OW16B Digital Multimeter with Bluetooth

    OWON OWON OW16B Bluetooth Multimeter

    Features Data-logger & Multimeter & Thermometer 3 (5/6) digits, 6000 counts Supports multiple device connections allowing single display monitoring Chart and Table mode, to analyse your data Supports NCV Voice Broadcast simplifies testing Built-in offline recording function

    € 44,95

    Members € 40,46

  • Last stock! OWON OW18E Bluetooth Multimeter

    OWON OWON OW18E Bluetooth Multimeter

    2 in stock

    Features 4 1/2 bit resolution (20000 Counts) Data Logger Multimeter Thermometer True RMS test supported BLE 4.0 wireless transmission, more stable,less power consumption Build-in offline record function Chart and Diagram mode helps to analyze the data tendency Flashlight function lightens the darkness Support NCV non-contact voltage sense Widely supported on Android, iOS, Windows Included OWON 18E Bluetooth Multimeter Quick Guide Multimeter Lead K-type Thermocouple Bolt Driver App Download The Bluetooth function of this multimeter is compatible with Android-app version 1.5.8.0 or newer. Use the QR code in the box or go to http://files.owon.com.cn/bluetooth.

    2 in stock

    € 69,95

    Members € 62,96

  • OWON SP3103 DC Power Supply (300 W)

    OWON OWON SP3103 DC Power Supply (300 W)

    OWON SP3103 is a compact 300 W power supply with various combinations of voltages and currents for accurate measurements for every need. Features Small body for easy carry 300 W maximum output power High resolution: 10 mV/1 mA Low ripple and noise Over-voltage/over-current protection Intelligent temperature control fan cooling 3.7-inch TFT LCD display Support RS232 digital communication Support SCPI Specifications Rated Output Voltage 0-30 V Current 10 A Output Power 300 W Load Regulation Voltage ≤30 mV Current ≤30 mA Power Regulation Voltage ≤20 mV Current ≤20 mA Setting Resolution Voltage 10 mV Current 1 mA Readback Resolution Voltage 10 mV Current 1 mA Value Resolution (within 12 months) (25℃±5℃) Voltage ≤0.1% ± 20 mV Current ≤0.05% ± 10 mA Readback Value Resolution (25℃±5℃) Voltage ≤0.1% ± 20 mV Current ≤0.1% ± 10 mA Ripple/Noise (20Hz-20MHz) Voltage (Vp-p) ≤30 mVp-p Voltage (rms) ≤3 mVrms Current (rms) ≤30 mAp-p Output temperature coefficient (0℃-40℃) Voltage ≤0.3% ± 10 mV Current ≤0.3% ± 20 mA Readback temperature coefficient Voltage ≤0.3% ± 10 mV Current ≤0.3% ± 10 mA Response Time ≤1.0 ms Storage 5 groups of data Working Temperature 0-40℃

    € 129,95

    Members € 116,96

  • OWON HDS242 2-ch Oscilloscope (40 MHz) + Multimeter

    OWON OWON HDS242 2-ch Oscilloscope (40 MHz) + Multimeter

    The HDS242 is a portable 2-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope and multimeter. It features a high-contrast 3.5-inch color display suitable for outdoor facility maintenance, rapid on-site measurement, automobile maintenance, power detection. etc. Features Oscilloscope + Multimeter 3.5-inch high-resolution, high-contrast color LCD display – suitable for outdoor use 18650 lithium battery – can work continuously for up to 6 hours USB Type-C interface – support power bank and PC connection Self-calibration function SCPI supported – facilitate secondary development Specifications Oscilloscope Bandwidth 40 MHz Channels 2-ch Oscilloscope Sample Rate 250 MSa/s Acquisition Model Normal, Peak detect Record Length 8K Display 3.5-inch LCD Waveform Refresh Rate 10,000 wfrms/s Input Coupling DC, AC, and Ground Input Impedance 1 MΩ ±2%, in parallel with 16pF ±10pF Probe Attenuation Factors 1X, 10X, 100X, 1000X, 10000X Max. Input Voltage 400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation) Bandwidth Limit (typical) 20 MHz Horizontal Scale 5ns/div - 1000s/div, step by 1 - 2 - 52ns/div - 1000s/div, step by 1 - 2 - 55ns/div - 1000s/div, step by 1 - 2 - 52ns/div - 1000s/div, step by 1 - 2 - 5 Vertical Sensitivity 10mV/div - 10V/div Vertical Resolution 8 bits Trigger Type Edge Trigger Modes Auto, Normal, single Automatic Measurement Frequency, Period, Amplitude, Max, Min, Mean, PK-PK Cursor Measurement ΔV, ΔT, ΔT & ΔV between cursors Multimeter Max. Resolution 20,000 counts Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test Input Impedance 10 MΩ Max Input Voltage AC: 750 V | DC: 1000 V Max Input Current DC: 10 A | AC: 10 A Diode 0-2 V Other Connectivity USB Type-C Dimensions 198 x 96 x 38 mm (7.68 x 3.74 x 1.5') Weight 600 g (without batteries) Included 1x OWON HDS242 Oscilloscope 1x Soft Bag 1x Probe 1x Power Cord 1x Probe Adjust 1x USB Cable 1x Power Adapter 1x Pair of Multimeter Probe Leads (red one and black one) 1x Pair of Oscilloscope Probe Leads (BNC to Alligator Clip) 1x User Manual (English) Downloads User Manual for HDS200 Series SCPI Protocol for HDS200 Series Quick Guide for HDS200 Series PC Software for OWON HDS200 Series

    € 129,95

    Members € 116,96

  • Last stock! OWON OW18B Digital Multimeter with Bluetooth

    OWON OWON OW18B Bluetooth Multimeter

    2 in stock

    Features Data-logger & Multimeter & Thermometer 3 (5/6) digits True RMS test supported BLE 4.0 wireless transmission, more stable, less power consumption Chart and Diagram mode, to analyze your data Supports NCV Voice Broadcast simplifies testing Flashlight function Built-in offline recording function Supports Android, iOS Included Test leads K-type thermocouple 9 V Battery Bolt driver Crocodile clip Quick guide

    2 in stock

    € 49,95

    Members € 44,96

  • OWON SDS1022 2-ch Oscilloscope (20 MHz)

    OWON OWON SDS1022 2-ch Oscilloscope (20 MHz)

    The OWON SDS1022 is a competitively priced oscilloscope with a sample rate of 1 GSa/s and a bandwidth of 20 MHz. Furthermore, with this oscilloscope you have 2 channels at your disposal and it is possible to store 10 K points per measurement. There is a USB connector on the back for exporting measurement results to the PC, and a USB port on the front for exporting to a USB memory stick.Features Bandwidth: 20 MHz 2-Channels Sample rate: 100 MS/s Ultra-thin body 7' high resolution LCD SCPI and LabVIEW supported Specifications Bandwidth 20 MHz Sample Rate 100 MS/s Horizontal Scale (s/div) 5 ns/div - 1000 s/div, step by 1 - 2 - 5 Channel 2 Display 7' color LCD, 800 x 480 pixels Input Coupling DC, AC and GND Vertical Resolution (A/D) 8 bits (2 channels simultaneously) Vertical Sensitivity 5 mV/div - 5 V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Waveform Math +, -, x, ÷, invert, FFT Fuse 2 A, T class, 250 V Dimension (W x H x D) 301 x 152 x 70 mm Device Weight 1.10 kg Downloads USB Driver PC Software

    € 199,95

    Members € 179,96

  • OWON XDS2102A 2-ch Oscilloscope (100 MHz)

    OWON OWON XDS2102A 2-ch Oscilloscope (100 MHz)

    3 in stock

    12-bit high-resolution ADC, restoring the waveform detail fully 20M record length, and 55,000 wfms/s waveform refresh rate low background noise, vertical sensitivity in 1 mV/div - 10 V/div multi-trigger, and bus decoding function SCPI and LabVIEW supported ultra-thin body-design, less space accommodation multi-interface integration 8 inch 800 x 600 high-resolution LCD XDS2102A Bandwidth 100MHz Sample Rate 1GS/s Vertical Resolution (A/D) 12 bits Record length 20M Horizontal Scale (s/div) 2ns/div - 1000s/div, step by 1 - 2 - 5 Channel 2 + 1 (external) Display 8' color LCD, 800 x 600 pixels Trigger Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232, and CAN (standard for XDS2102A/optional for other models) Bus Decoding I2C, SPI, RS232, and CAN Communication Interface USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional) Power Supply 100V - 240V AC, 50/60Hz, CAT II Fuse 2A, T class, 250V Dimension (W x H x D) 340 mm x 177 mm x 90 mm Weight 2.60 kg

    3 in stock

    € 469,00

    Members € 422,10

  • OWON SDS1104 4-ch Oscilloscope (100 MHz)

    OWON OWON SDS1104 4-ch Oscilloscope (100 MHz)

    Out of stock

    Bandwidth 100MHz Sample Rate 100MS/s Horizontal Scale (s/div) 5ns/div - 1000s/div, step by 1 - 2 - 5 Channel 4 Display 7' color LCD, 800 x 480 pixels Input Coupling DC, AC and GND Vertical Resolution (A/D) Vertical Resolution (A/D) Vertical Sensitivity 5mV/div - 5V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal and Single Waveform Math +, -, x, ÷, invert, FFT Fuse 2A, T class, 250 V Dimension (W x H x D) 301 mm x 152 mm x 70 mm Weight 1.1 kg Included 1 x SDS1104 1 x Mains power cord 1 x CD Rom 1 x Quickstart Guide 1 x USB Cable 4 x Oscilloscope probe 1 x Probe Adjust For more information, check out the user manual here.

    Out of stock

    € 299,00

    Members € 269,10

  • OWON HDS2102s 2-ch Oscilloscope (100 Mhz) + Multimeter + Signal Generator

    OWON OWON HDS2102s 2-ch Oscilloscope (100 Mhz) + Multimeter + Signal Generator

    The OWON HDS2102s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth of 100 MHz, multimeter and signal generator. It features a high-contrast 3.5-inch color display suitable for outdoor facility maintenance, rapid on-site measurement, automobile maintenance, power detection. etc.Features Oscilloscope + multimeter + waveform generator, multifunction in one 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use 18650 lithium battery, can work continuously for 3-6 hours USB Type-C interface, support power bank, support PC software connection Self-calibration function SCPI supported, facilitate secondary development Specifications Bandwidth 100 MHz Channels 2-ch Oscilloscope + 1-ch Generator Sample Rate 500 MSa/s Acquisition Model Normal, Peak detect Record Length 8K Display 3.5-inch LCD Waveform Refresh Rate 10,000 wfrms/s Input Coupling DC, AC, and Ground Input Impedance 1 MΩ ±2%, in parallel with 16pF ±10pF Probe Attenuation Factors 1X,10X,100X,1000X,10000X Max. input Voltage 400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation) Bandwidth Limit (typical) 20 MHz Horizontal Scale 2ns/div - 1000s/div, step by 1 - 2 - 5 Vertical Sensitivity 10mV/div - 10V/div Vertical Resolution 8 bits Trigger Type Edge Trigger Modes Auto, Normal, single Automatic Measurement Frequency, Period, Amplitude, Max, Min, Mean, PK-PK Cursor Measurement ΔV, ΔT, ΔT&ΔV between cursors Communication Interface USB Type-C Multimeter Specifications Max. Resolution 20,000 counts Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test Input Impedance 10 MΩ Max Input Voltage AC 750 V, DC 1000 V Max Input Current DC: 10 A, AC: 10 A Diode 0-2 V Waveform Generator Specifications Frequency Output Sine 0.1 Hz - 25 MHz Square 0.1 Hz - 5MHz Ramp 0.1 Hz - 1 MHz Pulse 0.1 Hz - 5 MHz Arbitrary 0.1 Hz - 5 MHz Sampling Rate 125 MSa/s Channel 1-ch Amplitude Range (high impedance) 20 mVpp - 5 Vpp Waveform Length 8K Vertical Resolution 14 bits Output Impedance 50Ω Included 1x OWON HDS2102s 1x Power adapter 1x USB cable 1x Passive probes 2x Crocodile clip cable 1x Set of multimeter probes (one red and one black) 1x User manual 1x Probe correction adjustment knife Downloads User Manual Specifications SCPI Protocol Quick Guide Software

    € 249,00

    Members € 224,10

  • OWON VDS6102A 2-ch USB Oscilloscope (100 MHz)

    OWON OWON VDS6102A 2-ch USB Oscilloscope (100 MHz)

    Features Bandwidth 100 MHz Vertical resolution 14 bits Rise time ≤3.5 ns Memory 10 Mpts Number of channels 2 channels + 1 channel function generator Horizontal scale 5ns - 100s/div Sample rate Max. 1 GSa/s Maximum voltage 40 V (peak - peak) Automatic measurements Vpp, Vavg, Vamp, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot, Rise Time, Connectivity USB (type C), LAN, Wifi (optional) Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty Bandwidth 5 MHz Dimensions 190 x 120 x 18mm Weight ~380 g Sample rate 25 MSa/s Standard waveforms Sine (0.1 Hz - 5 MHz), Square (0.1 Hz - 200 kHz), Ramp (1 Hz - 10 kHz), Pulse (1 Hz - 10 kHz) Resolution 10 bits DC offset range (AC + DC) ±2.5 V Amplitude range 10 mVpp - 5 Vpp

    € 329,00

    Members € 296,10

  • OWON XDS3104E 4-ch Oscilloscope (100 MHz)

    OWON OWON XDS3104E 4-ch Oscilloscope (100 MHz)

    Out of stock

    Features Function button area DAQ, P/F, W. R E C Trigger control area Horizontal control area Vertical control area Default Print Turn on/off the Counter Snapshot Direction key Multipurpose knob Specifications XDS3104E Bandwidth 100MHz Sample Rate 1 GS/s Vertical Resolution (A/D)) 8 bits Record length 40M Waveform Refresh Rate 45,000 wfms/s Horizontal Scale (s/div)) 2 ns/div - 1000s/div, step by 1 - 2 - 5 Channel 4 Display 8' color LCD, 800 x 600 pixels display Sample Rate / Relay Time Accuracy ±2.5 ppm Input Coupling DC, AC, GND Vertical Sensitivity 1 mV/div - 10 V/div (at input) Trigger Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge and Logic Trigger Mode Auto, Normal, and Single Vertical Range ±2 V (1 mV/div~50 mV/div)±20 V (10 0mV/div~1 V/div)±200 V (2 V/div~10 V/div) Waveform Math +, -, *, /, FFT, Intg, Diff, Sqrt, and user-defined function Communication Interface USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional) Frequency Counter available Power Supply 100 V - 240 V AC, 50/60 Hz, CAT II Fuse 2 A, T class, 250 V Dimensions 340 x 177 x 90 mm Downloads User manual Quick guide USB Driver

    Out of stock

    € 499,00

    Members € 449,10

  • OWON SPE6102 DC Power Supply (200 W)

    OWON OWON SPE6102 DC Power Supply (200 W)

    The OWON SPE6102 is a 1-channel DC power supply (200 W) in a small body with features like over voltage and over current protection. It has a high resolution of 10 mV/1 mA. The 2.8' LCD displays the following information (constant voltage output, constant current output, cumulative running time, actual output power, channel output status, actual voltage output, actual current output).Features Small body for easy carry High resolution: 10 mV/1 mA List waveform editing output, editable 10 groups of timing output function Low ripple/noise Over voltage / over current protection Output voltage and current curve monitoring function Intelligent temperature control fan cooling 2.8-inch TFT LCD display USB communication interface, support SCPI Specifications Model SPE6102 SPE6103 Rated Output (0-40°C) Voltage 0-60 V 0-60 V Current 10 A 10 A Output Power 200 W 300 W USB Output 5 V/1 A (SPE Series) or suppout QC2.0, QC3.0, BC1.2, Apple, Huawei, Samsung fast charging protocols (optional) Load Regulation Voltage ≤30 mV Current ≤20 mA Power Regulation Voltage ≤30 mV Current ≤20 mA Setting Resolution Voltage 10 mV Current 1 mA Readback Resolution Voltage 10 mV Current 1 mA Value Resolution (within 12 months) (25 ±5°C) Voltage ≤0.1% ±30 mV ≤0.1% ±30 mV Current ≤0.05% ±10 mA Readback Value Resolution (25 ±5°C) Voltage ≤0.1% ±30 mV ≤0.1% ±30 mV Current Ripple/Noise Voltage (Vp-p) ≤50mVp-p ≤50mVp-p Voltage (rms) ≤5mVrms ≤5mVrms Current (rms) ≤30mAp-p Output temperature coefficient (0-40°C) Voltage 100ppm/°C Current 200ppm/°C Readback temperature coefficient Voltage 100ppm/°C Current 200ppm/°C Response Time (50-100% rated load) ≤1.0ms Storage 4 groups of data Working Temperature 0-40°C Included 1x OWON SPE6102 1x Power Cord 1x Quick Guide 1x USB Cable 1x Fuse Downloads User Manual Programming Manual Software

    € 109,95

    Members € 98,96

  • OWON P4603 DC Power Supply (180 W)

    OWON OWON P4603 DC Power Supply (180 W)

    Features Channel Single Channel Output Total Output Power 180 W Channel Output 0 - 60 V / 0 - 3 A × 1-CH Display 3.7' color LCD display Dimension 117 mm(L) × 194 mm(H) × 295 mm(D) Weight Approx. 5.8 kg Interface RS232 Specifications Rated Output (0 ℃ - 40 ℃) Voltage 0 - 60 V Current 3 A Load Regulation Voltage ≤ 0.01% + 3 mV Current ≤ 0.01% + 3 mA Power Regulation Voltage ≤ 0.01% + 3 mV Current ≤ 0.01% + 3 mA Setting Resolution Voltage 1 mV Current 1 mA Readback Resolution Voltage 1 mV Current 1 mA Setpoint accuracy (within 12 months) (25 ℃ ± 5 ℃) Voltage ≤ 0.03% + 10 mV Current ≤ 0.1% + 5 mA Readback Resolution (25 ℃ ± 5 ℃) Voltage ≤ 0.03% + 10 mV Current ≤ 0.1% + 5 mA Ripple/Noise (20 Hz - 20 MHz) Voltage (Vp-p) ≤ 4 mVp-p Voltage (Vrms) ≤ 1 mVrms Current (rms) ≤ 4 mArms Output temperature coefficient (0 ℃ - 40 ℃) Voltage ≤ 0.03% + 10 mV Current ≤ 0.1% + 5 mA Readback temperature coefficient Voltage ≤ 0.03% + 10 mV Current ≤ 0.1% + 5 mA Response Time 100 μs Storage 5 groups of data Working Temperature 0 - 40 ℃

    € 169,95

    Members € 152,96

  • OWON XDS3102A 2-ch Oscilloscope (100 MHz)

    OWON OWON XDS3102A 2-ch Oscilloscope (100 MHz)

    3 in stock

    The OWON XDS3102A is a 12-bit 2-channel digital storage oscilloscope (100 MHz) with digital multimeter and 2-channel arbitrary waveform generator (25 MHz). It features a touchscreen, a VGA output, WiFi and a 13200 mA battery. Performance 8-bit, 12-bit or 14-bit high-resolution ADC, restoring the waveform detail fully 40M record length, max 75,000 wfms/s waveform refresh rate Ow background noise, vertical sensitivity in 1 mV/div - 10 V/div Multi-trigger, and bus decoding function SCPI and LabVIEW supported Features Ultra-thin body-design, less space accommodation Multi-interface integration – USB host, USB device, USB port for PictBridge, LAN, AUX, and more VGA port – a better solution for video expansion, and teaching demonstration 8 inch 800 x 600 high-resolution LCD Optional multi-point touch screen, more user-friendly operation experience Specifications Bandwidth 100 MHz Sample Rate 1 GS/s Vertical Resolution (A/D) 12 bits Record length 40M Horizontal Scale (s/div) 2 ns/div - 1000s/div, step by 1 - 2 - 5 Channel 2 + 1 (external) Display 8" color LCD, 800 x 600 pixels Waveform Math   +, -, ×, ÷, FFT, FFTrms, Intg, Diff, Sqrt, User Defined Function, digital filter (low pass, high pass, band pass, band reject) Trigger Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I²C, SPI, RS232 Bus Decoding I²C, SPI, RS232 Communication Interface USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN Power Supply 100-240 V AC, 50/60 Hz, CAT II Power Consumption <15 W Fuse 2A, T class, 250 V Dimension 340 x 177 x 90 mm Weight 2.6 kg

    3 in stock

    € 669,00

    Members € 602,10

  • OWON SDS1202 2-ch Oscilloscope (200 MHz)

    OWON OWON SDS1202 2-ch Oscilloscope (200 MHz)

    The OWON SDS1202 2-channel oscilloscope features a high 200 MHz bandwidth, a sample rate of 1 GSa/s, an ultra-thin body and a 7-inch high resolution color LCD. The scope supports SCPI and LabVIEW. Features Bandwidth: 200 MHz 2 channels Sample rate: 1 GS/s Ultra-thin body 7-inch high resolution LCD SCPI and LabVIEW supported Specifications Bandwidth 200 MHz Sample Rate 1 GS/s Horizontal Scale (s/div) 2 ns/div - 1000 s/div, step by 1 - 2 - 5 Channel 2 Display 7' color LCD, 800 x 480 pixels Input Coupling DC, AC and GND Vertical Resolution (A/D) 8 bits (2 channels simultaneously) Vertical Sensitivity 5 mV/div - 5 V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Waveform Math +, -, x, ÷, invert, FFT Fuse 2A, T class, 250V Dimension (W x H x D) 301 x 152 x 70 mm Device Weight 1.10 kg Included 1x OWON SDS1202 Oscilloscope 1x Probe 1x Probe adjust 1x Power cord 1x USB cable 1x CD-ROM 1x Quick guide Downloads Datasheet User manual PC software SCPI commands

    € 319,00

    Members € 287,10

  • OWON XDS3064E 4-ch Oscilloscope (60 MHz)

    OWON OWON XDS3064E 4-ch Oscilloscope (60 MHz)

    Out of stock

    Function button area DAQ, P/F, W. R E C Trigger control area Horizontal control area Vertical control area Default Print Turn on/offthe Counter Snapshot Direction key Multipurpose knob XDS3064E Bandwidth 60MHz Sample Rate 1 GS/s Vertical Resolution (A/D)) 8 bits Record length 40M Waveform Refresh Rate 45,000 wfms/s Horizontal Scale (s/div)) 2ns/div - 1000s/div, step by 1 - 2 - 5 Channel 4 Display 8' color LCD, 800 x 600 pixels display Sample Rate / Relay Time Accuracy ±2.5 ppm Input Coupling DC, AC, GND Vertical Sensitivity 1mV/div - 10V/div (at input) Trigger Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge and Logic Trigger Mode Auto, Normal, and Single Vertical Range ±2V(1mV/div~50mV/div);±20V(100mV/div~1V/div);±200V(2V/div~10V/div) Waveform Math +, -, *, /, FFT, Intg, Diff, Sqrt, and user-defined function Communication Interface USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional) Frequency Counter available Power Supply 100 V - 240 V AC, 50/60 Hz, CAT II Fuse 2A, T class, 250 V Dimensions 340 x 177 x 90 mm Click here for the USB Driver, the user manual or the quick guide provided by OWON.

    Out of stock

    € 399,00

    Members € 359,10

  • OWON HDS1021M-N 1-ch Oscilloscope (20 MHz) + Multimeter

    OWON OWON HDS1021M-N 1-ch Oscilloscope (20 MHz) + Multimeter

    1 review

    Out of stock

    Features 2 in 1 (DSO + Multimeter) Auto-scale function 20 automatic measurements Bandwidth: 20 MHz USB data transmission supported Waveform record and replay Multimeter newly supported SCPI Rechargeable Li-ion battery (6 hours' backup) 2-in-one measurement device Oscilloscope + 3 3/4 digits multimeter + FFT spectrum analyzer. Auto-scale function While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale, and timebase scale according to the type, amplitude, and frequency of input signal. Adjustable trigger sensitivity Thanks to adjustable trigger sensitivity, this device filters the overlay noise and triggers the signal stably under the circumstance of noise. Specifications Bandwidth 20 MHz Sample Rate (real-time ) 500 MS/s Horizontal Scale (s/div) 5 ns/div~100 s/div, step by 1~2.5~5 Display 3.7” color TFT display (640 × 480 pixels) Channel single Record Length 24K points Vertical Sensitivity 5 mV/div~5 V/div (at input) Vertical Resolution (A/D) 8 bits Trigger Type Edge and Video Trigger Mode Auto, Normal, and Single Trigger Level ±6 divisions from screen center Acquisition Mode Sample, Peak Detect, and Average Waveform Storage 4 waveforms Communication Interface mini-USB, mini-RS232 Power Supply 100 V-240 V AC, 50/60 Hz Li-ion Battery 7.4 V, 6 hours’ operation Dimensions (W × H × D) 115 × 180 × 40 (mm) Multimeter Specifications Full-Scale Reading 3 (3/4) digits (max 4000-count) diode 0 V - 1.5 V Input Impedance 10 MΩ On / Off Test < 50 (± 30) beeping Voltage VDC : 400 mV, 4 V, 40 V, 400 V, 1000 V : ±(1% ± 1 digit);max input: DC 1000 V VAC : 4 V, 40 V, 400 V : ±(1% ± 3 digits), 750 V : ±(2% ± 3 digits);Frequency : 40 Hz - 400 Hz; max input : AC 750 V (virtual value) Current DC : 40 mA, 400 mA : ±(1.5% ± 1 digit), 10 A : ±(3% ± 3 digits) AC : 40 mA : ±(1.5% ± 3 digits), 400 mA : ±(2% ± 1 digit), 10 A : ±(5% ± 3 digits) Impedance 400 Ω : ±(1% ± 3 digits), 40 ΚΩ 4 ΜΩ : ±(1% ± 1 digit), 40 MΩ : ±(1.5% ± 3 digits) Capacitance 51.2 nF - 100 µF : ±(3% ± 3 digits) Software PC software for DSO

    Out of stock

    € 239,00

    Members € 215,10

  • Last stock! OWON XSA1015-TG Spectrum Analyser (9 kHz – 1.5 GHz)

    OWON OWON XSA1015-TG Spectrum Analyser (9 kHz - 1.5 GHz)

    1 in stock

    The OWON XSA1015-TG Spectrum Analyzer offers a variety of features that will make it an indispensable part of your lab. Features Frequency Range from 9 kHz up to 1.5 GHz 150 dBm Displayed Average Noise Level Phase Noise -82dBc/Hz @1 Gz and offset at 10 KHz Total Amplitude Accuracy <1.5dB 10 Hz Minimum Resolution Bandwidth (RBW) EMI Pre-compliance Test Kit 1.5 GHz Tracking Generator Kit 10.4 inches display Specifications Frequency Specification Frequency Range 9kHz - 1.5 GHz Resolution 1Hz Frequency span Range 0 Hz, 100 Hz to maximum frequency of device Accuracy ± span /(swept points -1) Internal reference Reference frequency 10.000000 MHz Temperature stability < 2.5 ppm (15 ℃ to 35 ℃) Aging rate < 1 ppm / year Bandwidth Resolution bandwidth (-3 dB) 10 Hz to 500 kHz (in 1 to 10 sequence), 1 MHz, 3 MHz Video bandwidth (-3 dB) 10 Hz to 3 MHz Amplitude Specification Displayed average noise level(DANL) Input attenuation 0 dB,1Hz resolution bandwidth Preamp off 1 MHz ~ 10 MHz - 140 dBm(nominated)10 MHz ~ 1GHz - 140 dBm(nominated)1 GHz ~ 1.5 GHz - 138 dBm (nominated) Preamp on <-82 dBc / Hz @ 10 kHz offset<-100 dBc / Hz @ 100 kHz offset<-110 dBc / Hz @ 1 MHz offset Level display range Log scale coordinate 1 dB ~ 255 dB Linear scale coordinate 0 to reference level level unit dBm, dBuW, dBpW, dBmV, dBuV, W, V Points 201 ~ 1001 Number of traces 5 Detectors Positive-peak, negative-peak, sample, normal, RMS Trace functions Clear write, Max Hold, Min Hold, View, Blank, Average Accuracy Input Attenuation Switching Uncertainty 20℃ ~ 30℃, fc=50 MHz, Preamplifier Off, 20dB RF attenuation, input signal 0~39 dB±0.5 dB Absolute Amplitude Uncertainty 20℃ ~ 30℃, fc=50 MHz, RBW=1 kHz, VBW=1 kHz, peak detector, 20 dB RF attenuationPreamplifier Off ±0.4 dB, input signal= -20 dBmPreamplifier On ±0.5 dB, input signal= -40 dBm Uncertainty input signal range 0 dbm ~ -50 dbm±1.5 dB VSWR input 10 dB RF attenuation,1 MHz ~ 1.5GHz<1.5, nominal Tracking generator Output frequency range 100 kHz ~ 1.5 GHz Output power level range -30 dBm ~ 0 dBm Output power level resolution 1dB Output flatness +/-3 dB Maximum safe reverse level Average total power: 30 dBm, DC: ±50 VDC Inputs and Outputs Front panel RF input connector 50 Ω,N-type female Front panel track generator output 50 Ω,N-type female 10 M reference input 50 Ω,N-type female Communication port USB Host, USB Device, LAN, earphone port, and VGA General technical specification Display TFT LCD, 10.4 inches Weight 5.0 kg Dimension (W x H x D) 421 x 221 x 115 mm Downloads User manual Quick guide Datasheet PC software

    1 in stock

    € 1.349,00

    Members € 1.214,10

Discover Elektor's measuring instruments collection

Elektor is the place for professionals and enthusiasts involved in electronics. We not only offer a source of education and inspiration, but also an extensive range of measuring instruments. These tools are essential for anyone who wants to take their projects to the next level of precision. Whether you are working on a complex design or testing a basic component, Elektor measuring instruments guarantee reliability and quality.

Essential measuring tools for your Projects

Elektor understands that good measuring instruments are the heart of every electronics project. That is why we have a wide range of oscilloscopes, multimeters, signal generators and more in our range. These tools have been carefully selected to meet the needs of both the hobbyist and the professional. With our measuring instruments you can tackle any electronics challenge with confidence.

In the rapidly changing world of electronics, it is crucial to have access to the latest technology. Our measuring instruments are equipped with the latest developments in electronics, so that you are always ahead of the curve. At Elektor you will find everything you need to support your electronics projects, from simple tools to advanced measuring equipment.

More than just measuring instruments

At Elektor it is more than just offering tools; we provide a community and a platform for knowledge sharing. In addition to measuring instruments, Elektor magazine offers ideas, information and inspiration for your next project. We are a source of innovation for electronics designers, both for professional use and for hobby projects.

Order your measuring instruments from Elektor

  • Quality and Diversity: An extensive range of high-quality measuring instruments.
  • Competitive Prices: Competitive prices with extra benefits for Elektor members.
  • Expertise and Support: Years of experience in electronics and a reliable source of knowledge and inspiration.

Prepare for success in your electronics projects with Elektor measuring instruments. Visit our collection today and find the perfect tools to suit your needs. With Elektor you choose quality, innovation and a community that is as passionate about electronics as you are.

Login

Forgot password?

Don't have an account yet?
Create an account