Specially developed for the education and hobby sector, this fully-fledged digital storage oscilloscope offers the best possible price/performance ratio without having to compromise on functionality or technical features. Whether Autoset and Autoscale, mathematical measurement functions, FFT, Cursor or XY mode and even a zoom function, all standard market functions are already integrated in this series. The data storage of the waveforms is either internal with memory for 16 waveforms or external on a USB memory in TXT, CSV or BIN format, which can be read out with the included software. Configurations can also be saved internally or screenshots of the display can be saved externally. The display of the waveforms can be achieved quickly and user-friendly through the Autoset function, via AutoScale the measured waveforms can be displayed even more precisely as required, whereby these settings can of course also be carried out completely manually via the key control. Features 2-channel oscilloscope with 100 MHz analogue bandwidth at max. 1 GS/s sampling rate 17.5 cm (7') TFT colour display with 800 x 480 pixels USB device connection for real-time data transmission USB host connection for external USB data carriers Handy and flat housing design with carrying handle Autoset function for user-friendly operation Recording length of max. 10,000 points Automatic measuring modes, XY mode and FFT function Specifications Bandwidth 100 MHz Channels 2 Sampling 1 CH 1 GS/s Sampling 2 CH 500 MS/s Rise Time < 3.5 ns Display Type Color TFT Resolution 800 x 480 Pixels Screen size (TFT) 17.5 cm (7') Hor. scale max. 1000 s/div Hor. scale min. 2 ns/div Memory depth 10,000 Points Vert. resolution 8 Bit Vert. scale max. 5 V/div Vert. scale min. 2 mV/div Mains voltage 110/240 V AC; 50/60 Hz Downloads User Manual Driver Software
The OWON XDS3102A is a 12-bit 2-channel digital storage oscilloscope (100 MHz) with digital multimeter and 2-channel arbitrary waveform generator (25 MHz). It features a touchscreen, a VGA output, WiFi and a 13200 mA battery.
Performance
8-bit, 12-bit or 14-bit high-resolution ADC, restoring the waveform detail fully
40M record length, max 75,000 wfms/s waveform refresh rate
Ow background noise, vertical sensitivity in 1 mV/div - 10 V/div
Multi-trigger, and bus decoding function
SCPI and LabVIEW supported
Features
Ultra-thin body-design, less space accommodation
Multi-interface integration – USB host, USB device, USB port for PictBridge, LAN, AUX, and more
VGA port – a better solution for video expansion, and teaching demonstration
8 inch 800 x 600 high-resolution LCD
Optional multi-point touch screen, more user-friendly operation experience
Specifications
Bandwidth
100 MHz
Sample Rate
1 GS/s
Vertical Resolution (A/D)
12 bits
Record length
40M
Horizontal Scale (s/div)
2 ns/div - 1000s/div, step by 1 - 2 - 5
Channel
2 + 1 (external)
Display
8" color LCD, 800 x 600 pixels
Waveform Math
＋, －, ×, ÷, FFT, FFTrms, Intg, Diff, Sqrt, User Defined Function, digital filter (low pass, high pass, band pass, band reject)
Trigger Type
Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I²C, SPI, RS232
Bus Decoding
I²C, SPI, RS232
Communication Interface
USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN
Power Supply
100-240 V AC, 50/60 Hz, CAT II
Power Consumption
＜15 W
Fuse
2A, T class, 250 V
Dimension
340 x 177 x 90 mm
Weight
2.6 kg
This complete replacement filter set for the Aoyue 8486 Fume Extractor contains a HEPA (High Efficiency Particulate Air) filter, a cotton air (sub) filter and an activated carbon air filter.
Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the FI allow flexible use of this instrument. FI testers allow a fault current to flow and determine at which fault current the FI reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated switch. 3-digit LCD display with backlight Normal (N) or Selective (S) -type RCD test Applicable measurement standards: IEC 61557-6, NF EN 61557-6, VDE 0413-6 Accessories: Carrying case, Test leads, Batteries and User manual Technical Specifications Nominal test current 10/30/100/500/1000mA Current selection 0.5x, 1x, 2x, 5x nominal current Trip time 10-2000 ms at 0.5 x 10-500 ms at 1x 10-150 ms at 2x 10-40 ms at 5x Ramp test 0.4 x to 1.4 times nominal rated current RCD Types Type-A, Type-AC Operation voltage 6 x 1,5 V AA (UM-3) batteries Dimensions (WxHxD) 92 x 200 x 50 mm Weight 700 g
This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The new developed control of the USB 2.0-interface via PC-Software gives the user the ability to run cyclical operations with programmable voltage, current, period of time and cycles. The dual action (coarse and fine set) control knobs make tuning the voltage and current level ever so smooth, precise and fast, due to the rotary encoder and microprocessor control. Setting the CC current limiting can be done in open circuit at output jacks. The three user defined presets of voltage and current limiting levels facilitate quick access to frequently used Volt/Ampere settings. The full remote control functionality offer a wide range of operation possibilities for the industrial and professional users. High RFI immunity and excellent EMI Overload, over temperature an tracking over voltage protections 3 user defined, recallable settings for voltage and current values Full remote control of voltage and current and output control on an off via the analog port PC-Software for remote control via USB 2.0 Time programmable cycles of current and voltage with PC software Isolated ground, active PFC and high power efficiency, intelligent fan control from zero to full speed Rotary encoder control knob with coarse and fine tuning LabVIEW driver included Saftey: EN 61010-1, EN 60950-1 Accessories: power cable, USB interface cable, software for Windows XP/Vista/7/8 and manual Display 3-digit 15 mm green LED display Output voltage 1 ~ 32 V DC adjustable Output current 20 A / 5 A (main output (rear panel) / front output) Output power 640 W Residual ripple 5 mVrms Efficiency > 87 % Operating voltage 200 ~ 240 V AC; 50/60 Hz Dimensions (WxHxD) 200 x 90 x 255 mm Weight 2.6 kg
MDP-P906 has a built-in cooling fan, and maximum output power of up to 300 W, which meets a wider range of testing needs and application scenarios. Through 2.4 GHz wireless communication, it can be connected to MDP-M01 Smart Digital Monitor module to realize the free combination of multiple channels of 300 W per channel. MDP-P906 has the index, stability and reliability comparable to a professional power supply. It can output pure current, and provide powerful functions such as programmable output, timing output, timing control, automatic compensation, boost mode, etc., making itself a real cost-effective, smart and customized programmable linear DC power supply. MDP-P906 adopts a precision CNC machined aluminum alloy shell, with fine workmanship, novel, mini and beautiful appearance, it completely subverts the rigid image of traditional desktop power supply. With stackable modular design and wireless communication function, MDP-P906 can work independently or paired, both on the workbench, and be carried out for on-site maintenance. MDP-P906 is a perfect solution for electronic engineer, especially field application engineers to meet different needs of power sources. Built-in silent cooling fan, instant cooling, ensure a stable and efficient output! Smart linear compensation, constant voltage & constant current Positive & negative output, series boost, parallel current sharing Applications Universal tests and teaching experiments in R&D laboratory Maintenance of digital products Property verification and fault diagnosis of devices and circuits Emergency power supply for model airplanes and vehicles Power supply testing of RF and microwave circuits or modules Quality control and quality inspection Supply purified power for high-accuracy digital-analog hybrid circuits and Hi-Fi audio devices Specifications Input DC 4.2-30 V/14 A (Max)QC 3.0/PD2.0, 20 V/5 A (Max) Output 0-30 V/0-10 A, 300 W (Max) Conversion efficiency 95% Output resolution 10 mV/2 mA, up to 1 mV/1 mA via Display Control module Output accuracy 0.03%+5 mV0.05%+2 mV Adjustment rate Load adjustment rate <±0.01%Power adjustment rate <±0.01% Ripple and noise <250 uVrms, 3 mVpp; 2 mArms Transient response <4 uS Safety protections Input over-voltage, under-voltage, reverse connection protection, output over-current, back-flow protection and over-temperature protection Others Automatically shut-down and enter micro-power modeSupport USB firmware upgrade Dimensions 112 x 66 x 20 mm Weight 181 g Included 1x MDP-P906 Digital Power Supply 2x Output Cable 1x User Manual Downloads User Manual v1.1 Firmware v1.32
Siglent's SDG2000X is a series of dual-channel function/arbitrary waveform generators with specifications of up to 120 MHz maximum bandwidth, 1.2 GSa/s sampling rate and 16-bit vertical resolution. The proprietary TrueArb & EasyPulse techniques help to solve the weaknesses inherent in traditional DDS generators when generating arbitrary, square and pulse waveforms. With advantages above, SDG2000X can provide users with a variety of high fidelity and low jitter signals, which can meet the growing requirements of complex and extensive applications.
Dual-channel, 40 MHz bandwidth, 20Vpp maximum output amplitude, high fidelity output with 80dB dynamic range.
High-performance sampling system with 1.2GSa/s sampling rate and 16-bit vertical resolution. No detail in your waveforms will be lost.
Innovative TrueArb technology, based on a point-by-point architecture, supports any 8pts~8Mpts Arb waveform with a sampling rate in range of 1μSa/s~75MSa/s.
Innovative EasyPulse technology, capable of generating lower jitter Square or Pulse waveforms, brings a wide range and extremely high precision in pulse width and rise/fall times adjustment.
Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, ASK and PWM.
Sweep and Burst functions.
High precision Frequency Counter.
Standard interfaces: USB Host, USB DeviceUSBTMC, LAN (VXI-11) Optional interface: GPIB.
4.3” touch screen display for easier operation.
Maximum output frequency
40 MHz
Output channels
2
Sampling rate
1.2 GSa/s (4X Interpolation)
Wave length
CH1:16Kpts,CH2:512Kpts
Frequency resolution
1μHz
Vertical resolution
16bit
Standard interfaces
Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11)
High-performance Sampling SystemBenefiting from a 1.2GSa/s and 16-bit sampling system, SDG2000X achieves extremely high accuracy performance in both time domain and amplitude, which results in more accurately reconstructed waveforms and lower distortion.Innovative EasyPulse TechnologyWhen a Square/Pulse waveform is generated by DDS, there will be a one-clock-jitter if the sampling rate is not an integer-related multiple of the output frequency. SDG2000X EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Square/Pulse waveforms. Innovative TrueArb TechnologyFor arbitrary waveforms, TrueArb not only has all the advantages of traditional DDS, but also eliminates the probability that DDS may cause serious jitter and distortion. Easy controll with 4.3” Touch Screen Display and Arbitrary Waveform Software EasyWaveThe 4.3” touch screen display, makes operation much more convenient. And EasyWave is a powerful arbitrary waveform editing software that supports several ways to generate arbitrary waveform such as manual drawing, line-drawing, equation-drawing, coordinate-drawing, etc. It is quite convenient for users to edit their own arbitrary waveforms through EasyWave.Included
Siglent SDG2042X Arbitrary Function Generator
User Manual
Guarantee Card
CD (including EasyWave 1.0 computer software system)
Power Cord
USB Cable
Quick Start Guide
The OWON SDS1202 2-channel oscilloscope features a high 200 MHz bandwidth, a sample rate of 1 GSa/s, an ultra-thin body and a 7-inch high resolution color LCD. The scope supports SCPI and LabVIEW. Features Bandwidth: 200 MHz 2 channels Sample rate: 1 GS/s Ultra-thin body 7-inch high resolution LCD SCPI and LabVIEW supported Specifications Bandwidth 200 MHz Sample Rate 1 GS/s Horizontal Scale (s/div) 2 ns/div - 1000 s/div, step by 1 - 2 - 5 Channel 2 Display 7' color LCD, 800 x 480 pixels Input Coupling DC, AC and GND Vertical Resolution (A/D) 8 bits (2 channels simultaneously) Vertical Sensitivity 5 mV/div - 5 V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Waveform Math ＋, －, x, ÷, invert, FFT Fuse 2A, T class, 250V Dimension (W x H x D) 301 x 152 x 70 mm Device Weight 1.10 kg Included 1x OWON SDS1202 Oscilloscope 1x Probe 1x Probe adjust 1x Power cord 1x USB cable 1x CD-ROM 1x Quick guide Downloads Datasheet User manual PC software SCPI commands
Auto scan pen meter in a set of tweezers for SMD measure precise and fast small ship components, ideal for use in the service- and education-fields.
3 5/6 digit, 11 mm LCD-display; max. 5999
Low battery indication and auto power off
Automatic recognize resistance, capacitance and diode, continuity test
Measure high resistance and capacitance quickly
Accessories: batteries and manual
Specifications
Resistance
600 Ω/6/60/600 kΩ/6/60 MΩ; ± 1,2% + 2 dgt.
Capacitance
6/60/600 nF/6/60/600 µF/6/60 mF; ± 3,0% + 3 dgt.
Auto scan mode
600 Ω ~ 6 MΩ / 400 pF ~ 600 µF
Operation voltage
2 x 1,5 V AG13 button cells
Dimensions (WxHxD)
181 x 35 x 20 mm
Weight
65 g
The PCW03A True RMS digital multimeter is an innovative tool for any electrician, technician, or ambitious hobbyist. It can measure AC/DC voltage, current, and resistance, as well as frequency, duty ratio, and temperature. Due to its smart measurement function, the PCW03A detects the inteded measurement (continuity, voltage, resistance) and chooses the correct measurement range/function for the user, making super easy to use and beginner-friendly. Another great feature of the device, especially for beginners, are the illuminated input sockets. Here the device indicates which input sockets to use for the chosen measurement function. This way it is almost impossible to connect the measurement leads to the wrong socket and it will prevent the device from damage. With its 9999 counts and bright colors, the HD display provides precise measurement read-outs. Additionally, the CAT III 1000V; CAT IV 600V rating ensures safety while in use for various applications. Its smartphone-like design is easy and intiutive to use, making it a joy for daily operations. The double insulation, ceramic fuse, and removable rubber casing provide durability and protection for device and the user. Features CAT III 1000V; CAT IV 600V 9999 counts & True RMS Auto Range & smart measurement function: device automatically recognizes intended measurement (continuity, voltage, resistance) and chooses correct measurement range/function LED illuminated input sockets – the device shows you which input socket to use according to the measurement function chosen. Perfect for beginners to avoid damage to the device. AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty ratio, and temperature measurement NCV (non-contact voltage detection), live line, continuity, and diode test Double insulation & ceramic fuses Removable rubber casing with cushioning function for extra protection Large colour HD display with backlight Data hold with Min/Max function LED work light Innovative design and 5 button operating concept: like a smartphone Great packaging design and manual with pictures in various languages: EN, GER, ES, FR, PT, IT, GR Dimensions: 165 x 85 x 25 mm Weight: 255 g Included PCW03A Multimeter Batteries High-quality test leads K-type temp. probes Transport case
SP209 series logic analyzers rely on ScanaStudio software (runs Windows, Mac and Linux) to capture, display, analyze and decode signals. Most industry standard protocols can be interpreted, among which: SPI, I²C, USART, 1-Wire, CAN, LIN, IC, RS232, RS485, TWI and much more (click for full list of supported protocol decoders) Features 9 logic channels with adjustable thresholds (1.8 V, 2.5 V, 3.3 V, 5 V) State of the art input stage, with Schmitt triggers that eliminate glitches on slow signals 200 MHz sampling rate, with all 9 channels used. External clock option (state mode), up to 50 MHz Precise trigger-In and trigger-Out signals on SMA ports Samples compression and streaming via USB. 2 GB DDR-3 memory kicks-in when USB isn't fast enough. Guaranteed performances on all hosts. SP series logic analyzers compress and stream captured signals via USB 2.0 to a Windows, Linux or MacOS machine. USB bandwidth can be variable from a system to another and is practically limited to 20 MB/s. That's why SP logic analyzers have an embedded 2 GB DDR-3 memory that buffers captured samples at 1.6 GB/s, overcoming USB limitations. Trigger options Edge trigger Logic change on one or various channels Trigger on a sequence of timed logic signals Trigger on a protocol word or event (like serial word or I²C address acknowledge) External trigger input Trigger output Dual stage trigger (Ex: Edge trigger, then, Trigger on I²C address). Typical applications Designed for performance, SP series logic analyzers offer the possibility to capture and analyze 9 channels of logic signals and industrial buses at a rate of 200 MHz. This is perfectly adapted for demanding applications, where it is needed to capture logic signals with maximum resolution on all 9 channels. Embedded systems development and debugging Research and educational Serial protocols analysis, like I²C, SPI, UART or 1-Wire (non-exhaustive list) Industrial bus analysis: RS232, RS485, CAN, LIN ADC (Analog to Digital Converter) diagnostic Reverse engineering ScanaStudio application packs all the features you need to capture, measure and analyze analog signals. It's available free of charge for the major platforms below. The application is regularly updated, please check the release notes here ScanaStudio can be downloaded free of charge here. All decoders are free and open source and accessible in the GitHub repository.
UT196 True RMS solar digital multimeter is an ideal tool for solar power system maintenance. This rugged meter is designed for technicians who work in rugged outdoor environments. UT196 can measure up to 1700 V DC and 1500 V AC voltages, and 3000 A AC current with an external current clamp sensor. This solar meter offers IP65 protection and able to withstand 2 m drop as well. UT196 solar digital multimeter is designed with 1700 V DC, 1500 Vrms AC overload protection and tested for safe usage in CAT III 1000 V, CAT IV 600 V environments. Features True RMS Measure up to 1700 V DC and 1500 V AC for high voltage applications e.g. solar array, wind IP65 protection CAT III 1000V, CAT IV 600 V Analog bar Frequency response: 45 Hz~1 kHz Low-pass filter function Low impedance mode Built-in flashlight, bright backlight and visual alarm Applications High DC voltage measurement Output voltage and frequency measurement Voltage and frequency measurement Current and frequency measurement Specifications Range UT196 DC voltage (V) 1700 V ±0.2% +5 AC voltage (V) 1500 V ±0.8% +3 Frequency (Hz) 1 MHz ±0.08% +4 Resistance (Ω) 60 MΩ ±0.8% +2 Capacitance (F) 60 mF ±1.9% +5 Power 9 V battery Dimensions 195 x 95 x 58 mm Included UT196 Solar Digital Multimeter Battery Test leads Downloads Datasheet Manual
Function button area
DAQ, P/F, W. R E C
Trigger control area
Horizontal control area
Vertical control area
Default
Print
Turn on/offthe Counter
Snapshot
Direction key
Multipurpose knob
XDS3064E
Bandwidth
60MHz
Sample Rate
1 GS/s
Vertical Resolution (A/D))
8 bits
Record length
40M
Waveform Refresh Rate
45,000 wfms/s
Horizontal Scale (s/div))
2ns/div - 1000s/div, step by 1 - 2 - 5
Channel
4
Display
8' color LCD, 800 x 600 pixels display
Sample Rate / Relay Time Accuracy
±2.5 ppm
Input Coupling
DC, AC, GND
Vertical Sensitivity
1mV/div - 10V/div (at input)
Trigger Type
Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge and Logic
Trigger Mode
Auto, Normal, and Single
Vertical Range
±2V(1mV/div～50mV/div)；±20V(100mV/div～1V/div)；±200V(2V/div～10V/div)
Waveform Math
+, -, *, /, FFT, Intg, Diff, Sqrt, and user-defined function
Communication Interface
USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional)
Frequency Counter
available
Power Supply
100 V - 240 V AC, 50/60 Hz, CAT II
Fuse
2A, T class, 250 V
Dimensions
340 x 177 x 90 mm
Click here for the USB Driver, the user manual or the quick guide provided by OWON.
Features Advanced DDS technology, up to 5 MHz frequency output 125 MS/s sample rate and 1 μHz frequency resolution Vertical Resolution: 14 bits and 8K arb waveform length Comprehensive waveform output: 5 basic waveforms and 45 built-in arbitrary waveforms SCPI and LabVIEW supported 4'' high resolution (480 x 320 pixels) LCD Could work with OWON SDS Series DSO smoothly Please note: The photos show 3 additional buttons (Mod, Sweep, Burst) that are not available on the currently available version of the device Specifications Channel Single + Trigger Frequency Output 5 MHz Sample Rate 125 MS/s Vertical Resolution 14 bits Waveform Standard Waveform Sine, Square, Pulse, Ramp, and Noise Arbitrary Waveform Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, and others, total 45 built-in waveforms, and user-defined arbitrary waveform Frequency (resolution 1 μHz) Sine 1 μHz - 5 MHz Square 1 μHz - 5 MHz Pulse 1 μHz - 5 MHz Ramp 1 μHz - 1 MHz Noise 5 MHz (-3 dB) (typical) Arb 1 μHz - 5 MHz Amplitude Amplitude 1 m Vpp - 12.5 Vpp (50 Ω) 1 m Vpp - 25 Vpp (high impedance) Resolution 1 m Vpp, or 4 digits DC Offset Range (AD+DC) ±6.25 V (50 Ω), ±12.5 V (high impedance) DC Offset Range Resolution 1 mV, or 4 digits Load Impedance 50 Ω (typical) Arbitrary Waveform Wave Length 2 pts to 8K pts Sample Rate 125 MS/s Vertical Resolution 14 bits Non-volatile Memory 64 M bytes Input / Output Display 4' (480 x 320 pixels) LCD Type External reference clock input Communication Interface USB device Mechanical Dimension (W x H x D) 235 x 110 x 295 mm Device Weight 3 kg
This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit designs allow units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action (coarse and fine set) control knobs make tuning the voltage and current level ever so smooth, precise and fast, due to the rotary encoder and microprocessor control. Setting the CC current limiting can be done in open circuit at output poles. The three user defined presets of voltage and current limiting levels facilitate quick access to frequently used Volt/Ampere settings. The full remote control functionality offer a wide range of operation possibilities for the industrial and more sophisticated users. High RFI immunity and excellent EMI Over load, Over Temperature and Tracking Over Voltage protections 3 user defined, recallable settings for voltage and current values Full Remote control of voltage and current and output control on and off Isolated ground, Active PFC and high power efficiency, Intelligent fans control from zero to full speed Rotary Encoder Control Knob with coarse and fine tuning Safety: EN 61010-1, EN 60950-1 Accessories: power cable and manual Display 3-digit 15 mm green LED-display Output voltage 1 ~ 16 V DC adjustable Output current 40 A / 5 A (main output (rear panel) / front output) Output power 640 W Residual ripple 5 mV rms Efficiency > 85,5 % Operation voltage 200 ~ 240 V AC; 50/60 Hz Dimension (WxHxD) 200 x 90 x 255 mm Weight 2.6 kg
You can use RF Explorer 3G Combo equally well outdoor and indoor, and you can also connect it to a PC for extra functionality using standard mini-USB 2.0 connector. This model includes a WSUB1G baseline unit plus an RFEMWSUB3G Expansion Module conveniently assembled and tested. It comes with two SMA connectors and two antennas,a dual band telescopic 144 / 430 MHz antenna for all Sub-GHz frequencies and a whip helical antenna for 2.4 GHz band. Additional, specific band antennas may be needed to cover efficiently some of the frequencies supported. The combination of these two models offer the wide band coverage of the WSUB3G module, together with the highest sensitivity and quick response of the WSUB1G model for the popular sub-1GHz frequencies. Features Pocket size and light weight Solid aluminum metal case Includes a transport EVA carry case for RF Explorer Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes Lifetime free firmware upgrades available, open to community requested features High capacity Lipo for 16 hours+ of continuous run, rechargeable by USB Windows PC client Open Source Can be extended with internal Expansion Modules for additional band and functionality Wide band coverage to all popular RF frequencies, starting at 15 MHz and going up to 2.7 GHz. This includes very interesting frequency areas such as 2 m HAM radio, all VHF and UHF, FM radio, GPS, WiFi and WiMax, Bluetooth, etc. Firmware: RF Explorer 3G Combo is delivered with upgraded firmware v1.09. Note some of the features and operation accuracy will be improved in upcoming free firmware revisions. Documentation For more info and to get started with your RF Explorer, visit the start page. For questions and support, please visit https://support.rf-explorer.com Technical details Battery Lithium Cells / Batteries contained in equipment UN3481 - PI967 Frequency band 15-2700 MHz Frequency span 112 KHz - 600 MHz Graphics LCD 128 x 64 pixels, great visibility outdoors PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits Backlight for great indoor visibility 2 standard SMA 50 ohms connector, one for Sub-GHz wideband Nagoya NA-773 telescopic antenna included and another 2.4 GHz one for 15-2700 MHz band with helical antenna included. Amplitude resolution 0.5 dBm Dynamic range Left SMA port (WSUB1G) -115 dBm to 0 dBm Right SMA port (WSUB3G) -110 dBm to -10 dBm Absolute Max input power Left SMA port (WSUB1G) +5 dBm Right SMA port (WSUB3G) +30 dBm Average noise level (typical) -110 dBm Frequency stability and accuracy (typical) +-10 ppm Amplitude stability and accuracy (typical) +-6 dBm Frequency resolution 1 KHz Resolution bandwidth (RBW) automatic 3 KHz to 600 KHz Weight 185 g Size 113 x 70 x 25 mm Scope of delivery RF Explorer 3G Combo Nagoya NA-773 wideband telescopic antenna 2.4 GHz band antenna EVA Case
The OWON XSA1015-TG Spectrum Analyzer offers a variety of features that will make it an indispensable part of your lab.
Features
Frequency Range from 9 kHz up to 1.5 GHz
150 dBm Displayed Average Noise Level
Phase Noise -82dBc/Hz @1 Gz and offset at 10 KHz
Total Amplitude Accuracy <1.5dB
10 Hz Minimum Resolution Bandwidth (RBW)
EMI Pre-compliance Test Kit
1.5 GHz Tracking Generator Kit
10.4 inches display
Specifications
Frequency Specification
Frequency
Range
9kHz - 1.5 GHz
Resolution
1Hz
Frequency span
Range
0 Hz, 100 Hz to maximum frequency of device
Accuracy
± span /（swept points -1）
Internal reference
Reference frequency
10.000000 MHz
Temperature stability
< 2.5 ppm (15 ℃ to 35 ℃）
Aging rate
< 1 ppm / year
Bandwidth
Resolution bandwidth (-3 dB)
10 Hz to 500 kHz (in 1 to 10 sequence), 1 MHz, 3 MHz
Video bandwidth (-3 dB)
10 Hz to 3 MHz
Amplitude Specification
Displayed average noise level（DANL）
Input attenuation 0 dB，1Hz resolution bandwidth
Preamp off
1 MHz ~ 10 MHz - 140 dBm（nominated）10 MHz ~ 1GHz - 140 dBm（nominated）1 GHz ~ 1.5 GHz - 138 dBm (nominated)
Preamp on
<-82 dBc / Hz @ 10 kHz offset<-100 dBc / Hz @ 100 kHz offset<-110 dBc / Hz @ 1 MHz offset
Level display range
Log scale coordinate
1 dB ~ 255 dB
Linear scale coordinate
0 to reference level
level unit
dBm, dBuW, dBpW, dBmV, dBuV, W, V
Points
201 ~ 1001
Number of traces
5
Detectors
Positive-peak, negative-peak, sample, normal, RMS
Trace functions
Clear write, Max Hold, Min Hold, View, Blank, Average
Accuracy
Input Attenuation Switching Uncertainty
20℃ ~ 30℃, fc=50 MHz, Preamplifier Off, 20dB RF attenuation, input signal 0~39 dB±0.5 dB
Absolute Amplitude Uncertainty
20℃ ~ 30℃, fc=50 MHz, RBW=1 kHz, VBW=1 kHz, peak detector, 20 dB RF attenuationPreamplifier Off ±0.4 dB, input signal= -20 dBmPreamplifier On ±0.5 dB, input signal= -40 dBm
Uncertainty
input signal range 0 dbm ~ -50 dbm±1.5 dB
VSWR
input 10 dB RF attenuation，1 MHz ~ 1.5GHz<1.5, nominal
Tracking generator
Output frequency range
100 kHz ~ 1.5 GHz
Output power level range
-30 dBm ~ 0 dBm
Output power level resolution
1dB
Output flatness
+/-3 dB
Maximum safe reverse level
Average total power: 30 dBm, DC: ±50 VDC
Inputs and Outputs
Front panel RF input connector
50 Ω，N-type female
Front panel track generator output
50 Ω，N-type female
10 M reference input
50 Ω，N-type female
Communication port
USB Host, USB Device, LAN, earphone port, and VGA
General technical specification
Display
TFT LCD, 10.4 inches
Weight
5.0 kg
Dimension (W x H x D)
421 x 221 x 115 mm
Downloads
User manual
Quick guide
Datasheet
PC software
Peak UTP05E is a comprehensive CAT 5/5e/6 network cable analyser with superb accessories. Easy to use and very fast. Automatically identifies cable type (Straight through, cross-over, token ring etc) and verifies all the connections. Faults are clearly displayed and explained on screen. The Atlas IT will even instruct you on making up standard and special cables, complete with wire colors. Display type is alphanumeric LCD (not backlit). Features Automatic connection pattern recognition. Rapid assessment of all 8 wires within your cable. Identifies missing connections, shorted connections or incorrect connections. Will display the identity number of the 'identified' terminators to allow for easy testing and identification of multiple cable runs. Can display common cable colour codes to help you make up cables. Included UTP05 instrument. 2 miniature terminators to plug into another end of the cable run. 4 short patch cables to enable testing of patch panels and wall sockets. 24 miniature identified terminators, great for testing and identifying multiple cable runs. Pair of RJ11-to-RJ45 adapters to allow for easy testing of RJ11 based cabling. RJ45 to 8 x gold plated crocodile adapter for testing unterminated cables. Detailed printed user guide, complete with full-colour Ethernet wiring chart for common cable configurations. Alkaline battery installed and a spare alkaline battery. All supplied in a durable padded carry case. Specifications Category Cat 5, 5e, 6 (UTP) Connection type RJ45 plug or socket (RJ11 using supplied adapter set) Lines tested 8 lines (shielding not tested) Max. cable length 150 metres (500 feet) Test voltage ±5 V Test current ±2.5 mA Temperature range 10°C to 50°C (50°F to 122°F) Battery operating range 7 V to 13 V Battery type GP23, L1128, MN21, V23 (12 V Alkaline) Instrument dimensions 103 x 70 x 20 mm (4.1' x 2.8' x 0.8') Terminator dimensions 18 x 15 x 14 mm (0.7' x 0.6' x 0.6') Downloads Datasheet (EN) User Guide (EN) User Guide (DE) User Guide (FR) Common Ethernet Wiring Diagrams Avoid socket damage
The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions.As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness.In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.Through these many technical qualities, this device is suitable for the outdoor use of every electrician, technician and engineer in the service, construction or industrial sector.Features
Automatic illuminated functions keys and rotary switch
Integrated powerful LED Flashlight
Bleutooth 4.0 interface for data transfer to Android or iOS smartphones
TrueRMS measurement
ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z)
3 5/6-digits measurement value display (max. 5999)
LCD-Display with Relative-value measurement and 42-segment bargraph
Continuity with buzzer and diode-test
Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %)
Heavy Duty Case, IP67 dust- and waterproof
Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
Accessories: Carrying case, Test Leads, K-type
Specifications
DCV
600 mV / 6 / 60 / 600 / 1000 V +/-0,8% + 5 dgt.
ACV + DCV @ 10 MΩ
6 / 60 / 600 / 1000 V +/-1,5% + 20 dgt.
ACV + DCV @ 3 kΩ (LO Z)
6 / 60 / 600 / 1000 V +/-3% + 30 dgt.
ACV + DCV Frequency range
50 Hz … 400 Hz
ACV
6 / 60 / 600 / 1000 V +/-1% + 5 dgt.
ACV Frequency range
50 Hz … 1000 Hz
DCA
600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt.
ACA
600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt.
ACA Frequency range
50 Hz … 400 Hz
Ohm
600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,5% + 5 dgt.
Capacitance
60 / 600 nF / 6 / 60 / 600 / 6000 µF +/-3% + 5 dgt.
Frequency
10 Hz … 10 kHz +/- 1,0% + 5 dgt.
Temperature
20.0 °C … +760 °C +/-1,0% + 5 °C
Interface
Bluetooth 4.0 Low Energy
Operating Voltage
4 x 1,5 V AAA Batteries
Dimensions (WxHxD)
75 x 170 x 50 mm
Weight
400 g
The DS213 is a '5-track, 4-wave-line' oscilloscope with digital storage for general electrotechnical tasks and is based on an ARM Cortex-M3 core. The DS213 uses an FPGA to control the external A/D Converter and manage the data cache. It provides 4 partitions for applications to load and upgrade up to 4 different firmware versions. It also has a built-in 8 MB USB flash drive for storing waveforms and upgrading the firmware. The application layer of the oscilloscope code is open source, and users can develop firmware for the oscilloscope according to their own needs. Features Mini size, light weight, portable and handheld. It can store waveforms, making waveform analysis clearer and more effective. Multiple trigger modes, support Ascend/Descend Edge Trigger, Positive/Negative Pulse Trigger, and Logic Trigger. Powerful ability to process waveforms, it can automatically measure parameters such us voltage, frequency and pulse width. Specifications Analoge bandwidth 15 MHz Sampling rate 100 MSa/s CPU ARM Cortex-M3 FIFI & control FPGA ADC HWD9288-100 Analog channels 2 ([CH_A] [CH_B] Digital channels 2 ([CH_C] [CH_D] Analog input impedance 1 MΩ Max input voltage ±40 V (X1 probe)±400 V (X10 probe)
Coupling AC/DC Vertical sensitivity 10 mv/Div~10 V/Div (1-2-5 steps) Horizontal sensitivity 100 nS/Div~1 S/Div (1-2-5 steps) Vertical resolution 8 bits Standaard digital channel input impedance 100 KΩ Max digital channel input voltage +5 V Trigger types Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger Trigger modes Auto, Normal, Single, Slow Trigger source [CH_A] [CH_B] [CH_C] [CH_D] Storage Built-in 8 MB U disk storage for waveform data and images Power supply Internal 1000 mAh Lithium battery, external Micro USB port Display 2.8' Full Color TFT LCD (240x400 pixels) Dimensions 99.5 x 59 x 13.5 mm Weight 129 g (with battery) Included 1x DS213 Mini Oscilloscope 2x Probes 1x Date line 1x Allen key 1x USB cable 1x User manual Downloads Manual App Schematics
The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Features Passive 10:1 probe with support for oscilloscopes with automatic scaling Spring-loaded test needle for fine pitch measurements Multiple ground options Color coded cable holders Probe tip protection Insulated, can be used handheld Improved probe holder for handsfree measurement when used with PCBite PCB holders Included 1x SQ500 500 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.1
