Prototyping

105 products


  •  -17% Digitaal Desoldeerstation ZD-915

    Zhongdi Digital Desoldering Station ZD-915

    1 review

    Out of stock

    The ZD-915 is a digital desoldering station with ESD protection and digital display of both the actual and set value on an LCD screen. This desoldering station has high power in a compact and robust housing and makes desoldering easy, because it can be operated with one hand. The ZD-915 features a soldering gun that houses a filter that catches any sucked material, so you only need to replace the filters to continue. There is also a temperature sensor in the tip so that temperature fluctuations can be quickly absorbed. Features The temperature is easily adjusted by simple up/down buttons. 140 W temperature controlled soldering station with adjustable range from 160 °C to 480 °C. The desoldering station is designed for lead free desoldering specially. The side of the station features a typical holder with sponge. An illuminated power on/off is also loacted on the front. Specifications Station Voltage supply 220-240 V Power consumption 140 W Vakuum pressure 600 mm HG Desoldering Gun Power consumption 24 V AC 80 WHeat up rating 130 W Temperature 160-480 °C Heating element Ceramic heater Included 1x Desoldering station ZD-915 2x Spare soldering tip 3x Cleaning needle for desoldering tips 1x Spare filter for desoldering gun 1x Manual

    Out of stock

    $133.00$111.00

    Members identical

  •  -18% 2-in-1 SMD Hetelucht Rework Station ZD-8922

    Zhongdi 2-in-1 SMD Hot Air Rework Station ZD-8922

    This 2-in-1 SMD hot air soldering station offers a cost-effective solution for soldering and desoldering all types of SMD components. Features Incl. soldering iron and hot air pump. It is suitable for soldering and desoldering all types of surface mounted IC, PCB or components. The control unit has 2 LEDs that display the temperature and in °C and °F. The temperature can be easily adjusted with simple up/down buttoms. The hot air temperature can be calibrated from 3L/min to 24L/min continuously. Temperature is micro-processor controlled and can be adjusted. Temperature range: 50-480 °C for soldering iron, 100-500 °C for hot air pump. Specifications Power Soldering iron: 24 V, 60 WHot air pump: 300 W Power supply 220-240 VAC 50 Hz Temperature range Soldering iron: 50-480 °CHot air pump: 100-500 °C Dimensions 113 x 125 x 175 mm Weight 2 kg Included 1x Soldering station 1x Soldering iron 1x Hot air gun 3x Hot air nozzle 1x Soldering iron with needle bit 1x Power cord 1x Soldering iron stand with sponge

    $122.00$100.00

    Members identical

  •  -15% Verbeterde T-962 Infrarood reflow-oven (Elektor versie)

    Upgraded T-962 Infrared Reflow Oven (Elektor Version)

    Out of stock

    This upgraded version (available exclusively from Elektor) contains the following improvements: Enhanced protective earthing (PE) for furnace chassis Extra thermal insulation layer around furnace to reduce odors The infrared IC heater T-962 is a microprocessor-controlled reflow oven that you can use for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed. A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMDBGA and other small electronic parts mounted on a PCB assembly. The T-962 may be used to automatically rework solder to correct bad solder joints, remove / replace bad components and complete small engineering models or prototypes. Features Large infrared soldering area  Effective soldering area: 180 x 235 mm; this increases the usage range of this machine drastically and makes it an economical investment. Choice of different soldering cycles Parameters of eight soldering cycles are pre defined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down. Special heat up and temperature equalization with all designs Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder. Ergonomic design, practical and easily operated Good build quality but at the same time light weight and a small footprint allows the T-962 to be easily bench positioned transported or stored. Large number of available funtions The T-962 can solder most small parts of PCB boards, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production. Specifications Max. soldering area 180 x 235 mm (7.1 x 9.3") Rated power 800 W Processing time 1~8 minutes Power supply 220 V AC/60 Hz Dimensions 31 x 29 x 17 cm (12.2 x 11.4 x 6.7") Weight 6.2 kg Downloads User Manual GitHub

    Out of stock

    $310.00$265.00

    Members identical

  • Sensepeek 4019 PCBite Kit met 2x 200 MHz en 4x SP10 handsfree Probe

    Sensepeek Sensepeek 4019 PCBite Kit with 2x 200 MHz and 4x SP10 handsfree Probe

    PCBite holds your circuit board during soldering, inspection and test. SP200: 200 MHz hands-free oscilloscope probe The first truly hands-free 200-MHz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to set up. Just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54 mm (0.100ʺ) pitch pin header. The SP200 comes with a powerful magnet in the base, as for all PCBite probes and holders, which makes the probe easy to place and reposition. This probe is perfect for those who already has a metal base plate and holders which is a must for the function. SP10: Passive 1:1 hands-free probe A truly hands-free probe! Makes instant measurements or long triggering sessions simple. No more soldering wires to connect your probe or complicated tools to setup. Just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool. The dual pin header connector fits directly on a 2.54 mm (0.100”) connector. The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders, which makes the probe easy to place and reposition. Included 4x PCBite holder 1x Large Base plate (A4) 4x SP10 probes with pin tipped test needles 4x Extra test needles 1x Set of yellow insulation washers 5x Dupont-to-dupont test wires 2x Banana-to-dupont test wires 1x Micro fiber cloth 2x SP200 (200-MHz hands-free oscilloscope probe) 2x Testhook with detachable cable for ground connection 4x Ground cables (5 cm and 10 cm) 2x Set of color coded cable holders (4 colors) 2x Extra test needle Downloads (User Guides) PCBite Kit SP200 SP10

    $299.00

    Members $269.10

  • Build Your Own Multifunctional 4-Axis CNC Machine

    Build Your Own Multifunctional 4-Axis CNC Machine

    Plot, Cut, Drill, Mill and Laser with the Z99This book covers the construction, hardware, software, and operation of the Z99 – CNC machine. This is a multifunctional 4-axis machine for home construction.The capabilities of the Z99 machine include: large-format schematic plotting PCB plotting with etch-resist pens schematic plotting with conductive-ink pens letter cutting out of vinyl paper cutting PCB/substrate drilling PCB/substrate milling text milling laser engraving laser cutting of solder paste masks By making the support software available as freeware, readers of the book are challenged and encouraged to develop new applications for the Z99.The machine would not be of much use if the user has no option to create suitable files for the designs in mind. A large part of this book is dedicated to creating source files in a variety of freeware software packages, including Inkscape, DesignSpark PCB, KiCad, and FlatCAM.The book is also useful for readers keen to comprehend and then master the basic structure of HPGL, Gerber, Drill, and G-code files, as well as to have a go at deciphering them using software.

    $34.00

    Members $30.60

  • Makerfabs Jumper Wires Combo Pack

    Makerfabs Makerfabs Jumper Wires Combo Pack

    With these jumper wires (length: 20 cm) you can connect a Raspberry Pi or an Arduino with breadboards. Each cable consists of 40 individual wires/pins which can also be separated. Included 1x 40-pins female to female 1x 40-pins male to male 1x 40-pins male to female

    $8.00

    Members $7.20

  •  -25% Temperature-controlled Soldering Station ZD-8961-A

    Zhongdi Temperature-controlled Soldering Station ZD-8961-A

    This temperature-controlled digital soldering station with adjustable temperature range from 160°C to 480°C is an affordable and reliable tool for all kinds of soldering work in the (home) laboratory. Thanks to the high-quality coated heating element, the desired soldering temperature (Celsius or Fahrenheit) is quickly reached and shown on the LED display. Features A temperature controlled soldering station with adjustable temperature range from 160°C to 480°C (320°F to 896°F). A two-line LED readout simultaneously displays temperature setting and actual temperature. Gloss finish pleasing to the eye. Compact and lightweight soldering iron with silicone cord. A user-friendly soldering iron handle with a foam sleeve. Easier way to achieve °C/°F conversion with the asterisk button. Specifications Power 25 W (max. 50 W) Display LED Temperature 160°C to 480°C (320°F to 896°F) Temperature deviation ±5% Grounded Yes Heating rate Melt solder within 20s Withstand voltage 1500/1MA Input voltage AC 220-240 V (50 Hz) Output voltage 24 V Included Soldering station ZD-8961-A Solderin iron stand Soldering iron with soldering tip N8-1 Cleaning sponge Cleaning ball Power cord (EU)

    $89.00$67.00

    Members identical

  •  -33% Anet 4540 Desktop CNC-freesmachine

    Anet Anet 4540 Desktop CNC Router Machine

    With this CNC milling machine, you can easily and quickly engrave, cut and drill with the highest precision. This powerful and efficient 3-axis CNC router machine is great for hobbyists, makers, DIY enthusiasts and pro engineers. The easy-to-use machine is ideal for cutting and engraving wood, MDF, metal, plastic, acrylic, leather, PCB and other materials. Features 3-axis CNC controller Engraving, cutting and drilling Large working area (430 x 390 x 90 mm) 500 W high-power spindle GRBL control Easy to assemble (main components are already pre-assembled) Specifications Working area 430 x 390 x 90 mm (16.93 x 15.39 x 3.54") Power supply 48 V/10.4 A Power of spindle motor 500 W Speed of spindle motor 11,000 rpm Stepping motor 42 x 48 mm Limit switch X, Y, Z (both ends) Material 4040 Aluminum Emergency stop switch Yes Offline controller Yes Software GRBLcontrol (Candle), other GRBL-compatible Software Other feature Laser Engraving (laser module is not included) Supported systems Windows XP/7/8/10 Dimensions 650 x 532 x 320 mm (25.59 x 20.94 x 12.60") Weight 11.6 kg (25.6 pounds)  

    $997.00$664.00

    Members identical

  • PCB Holder with 4 Flexible Arms and LED Magnifier Lamp ZD-11M-3

    Zhongdi PCB Holder with 4 Flexible Arms and LED Magnifier Lamp ZD-11M-3

    Out of stock

    This PCB holder is ideal for any application where a third or fourth hand and a magnifying lamp are needed. Features The helping hands with 4 adjustable gooseneck arms. LED magnifying lamp with USB-C interface. Metal base with non-slip rubber strips. Comes with a cleaning ball, a sponge, a solder wire stand and rosin. Specifications Length of gooseneck arms: 270 mm LED magnifying lamp with 5-diopter lens Power supply via USB Dimensions (stand): 185 x 175 x 20 mm Weight: 620 g

    Out of stock

    $23.00

    Members $20.70

  •  -50% Solder Fume Extractor ZD-153A

    Zhongdi Solder Fume Extractor ZD-153A

    Fumes released during the soldering process are potentially harmful to health. This solder fume extractor is securely fastened to the work table with a bracket. Thanks to the 3 axes, the solder fume extractor can be positioned perfectly, i.e. directly above the rising solder fumes. The harmful solder fumes are extracted by a powerful but quiet fan and filtered by an activated-carbon filter mat. Features Removes solder fumes Absorbs toxic gases and fumes from brazing operations Helps reduce the likelihood of headaches, eye irration and neusea Adjustable absorption angle for accurate placement Easy replaceable activated carbon filter High-performance fan Low noise and long life service Specifications Absorption capacity: 1 m³/min (max.) Power consumption: 23 W Power supply: 220-240 VAC Amount of activated carbon filter: 7 g Maximum absorption weight: 2 g Dimensions: 220 x 270 x 168 mm (W x H x D) Weight: 1.4 kg

    $78.00$39.00

    Members identical

  • SB Components Raspberry Pi Pico Breadboard Kit

    SB Components SB Components Raspberry Pi Pico Breadboard Kit

    Raspberry Pi Pico Breadboard Kit helps the user to configure GPIO of Raspberry Pi Pico for use with external devices.Raspberry Pi Pico Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard” on top, a Programmable Buzzer, 4 programmable LEDs, 4 push buttons, and dedicated 5 V, 3V3, and GND pins at a single place. SB Components developed Raspberry Pi Pico Breadboard Kit with advanced features like independently controllable LEDs, Switches, a 400 points half-size breadboard that helps the user to prototype their projects with Raspberry Pi Pico in an efficient way.Raspberry Pi Pico Breadboard Kit can be interfaced with Raspberry Pi Pico from which a user can run electronics experiments, prototypes, mini robots, games, interact with Linux-ready Raspberry Pi, Exploration of circuits, etc. One can also connect external components with the breadboard provided on the top of the Raspberry Pi Pico Breadboard Kit.Features Four independent controlled LEDs Four independent controlled push buttons Compatible with Pico A 400 points half size breadboard Programmable buzzer Dedicated 5 V, 3V3 and Gnd pins for easy use Specifications Operating voltage 3.3 VDC Communication interface GPIO Dimensions 85 x 133 mm Applications Electrical experiments Prototypes Mini robots Games Exploration of circuits Downloads Manual Example codes Circuit diagram GitHub Included 1x Pico Breadboard Kit 5x Male to Male Jumper Wires 5x Female to Female Jumper Wires 5x Male to female Jumper Wires Note: Raspberry Pi Pico is not included.

    $21.00

    Members $18.90

  • Breadboard (830 Tie Points)

    Breadboard (830 Tie Points)

    Specifications Terminal strip, tie-point 630  Distribution strips, tie-point 200 Solderless breadboard (MB-102)  Wire size: Suitable for 20-29 AWG wires, jumper wire of 0.8 mm diameter Material: ABS. Transparent material Size: 16.5 x 5.3 x 0.85 cm Brand new and high quality They allow electronic components to be interconnected in an almost endless number of ways to produce working circuits Because no soldering is required, modifying or revising the circuits can be done quite easily The breadboard consists of a set of formed metal sockets inserted into a durable plastic housing Phosphor bronze nickel plated spring clips Adhesive sheet on the bottom of the board

    $7.00

    Members $6.30

  • MonkMakes Breadboard for Pico

    MonkMakes MonkMakes Breadboard for Pico

    Solderless breadboard labelled for the Raspberry Pi Pico It can be tricky to work out which pin is which when the Raspberry Pi Pico is attached to solderless breadboard. The MonkMakes Breadboard for Pico solves this problem by labelling the Pico pins on the 400 point solderless breadboard. Features 400 tie point 2 power busses Size: 8.2 x 5.5 x 0.85 cm Self-adhesive back

    $7.00

    Members $6.30

  • Velleman Solder Sn 60% Pb 40% (0.6 mm, 100 g)

    Velleman Velleman Solder Sn 60% Pb 40% (0.6 mm, 100 g)

    Specifications Weight: 100 g Ø: 0.6 mm Remark: - Sn 60% Pb 40% With resin core Melting point: 185 °C

    $15.00

    Members $13.50

  • Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    Sensepeek Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.The dual pin header connector fits directly on a 2.54 mm (0.100”) connector.The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.Included 4x PCBite holder 1x Large base plate (A4) 4x PCBite probe with pin tipped test needle 4x Extra crown tipped test needle 1x Set of yellow insulation washers 5x Dupont to dupont test wire 2x Banana to dupont test wire 1x Microfiber cloth DownloadsUser Guide

    $161.00

    Members $144.90

  • Last stock! Velleman Soldering Flux (10 g)

    Velleman Velleman Soldering Flux (10 g)

    2 in stock

    Specifications Appearance and colour: transparency liquid Odour: slightly pungent smell PH value: 4-5 Flammability: non combustible Density (g/cm³): 0.77-0.795 Boiling point: 235-255 °C Melting point: 130-150 °C Decomposition temperature: does not decompose easily Solubility: insoluble in water Weight: 10 g

    2 in stock

    $13.00

    Members $11.70

  • Velleman Solder Sn 60% Pb 40% (1 mm, 100 g)

    Velleman Velleman Solder Sn 60% Pb 40% (1 mm, 100 g)

    Specifications Weight: 100 g Ø: 1.0 mm Remark: - Sn 60% Pb 40% With resin core Melting point: 185 °C

    $15.00

    Members $13.50

  • Solderless Breadboard – 1660 Tie Point (ZY-204)

    Kuongshun Solderless Breadboard - 1660 Tie Point (ZY-204)

    Features 2 Terminal Strips 1260 Tie-points 4 Distribution Strips 400 Tie-points 3 Binding Posts Black aluminum plate Size: 21.5 x 13 cm Colored coordinates for easy component placement

    $23.00

    Members $20.70

  • Sensepeek 6003 PCBite Kit incl. 4x SQ10 Probe and Test Wires

    Sensepeek Sensepeek 6003 PCBite Kit incl. 4x SQ10 Probe and Test Wires

    Out of stock

    The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with the included PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. One side of the included baseplate is matte and the other is mirror polished. The mirror polished surface makes it easy to see components on the circuit board underside. For added protection during measurement the included insulation cover can be mounted on one of the surfaces. Included 4x PCBite PCB holders 1x Set of yellow insulation washers for the PCB holders 1x Large Base plate (A4) 1x Insulation cover for the base plate (A4) 1x Micro fiber cloth 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide (PCBite kit) User guide (SQ10 probes)

    Out of stock

    $183.00

    Members $164.70

  • Cleaning Nozzle Drill Kit (0.1-1.0 mm)

    Cleaning Nozzle Drill Kit (0.1-1.0 mm)

    Cleaning nozzle drill kit small box containing 10 carbide PCB drills from 0.1 mm to 1 mm all with 4 mm shaft. Ideal for drilling small precision holes in pcb's, plastic or soft metal.

    $10.00

    Members $9.00

  • PCB Holder ZD-11E

    Zhongdi PCB Holder ZD-11E

    This adjustable circuit board holder is ideal for clamping PCB for soldering, desoldering or rework. Features 2 adjustable grips on a retractable stand to accommodate various board sizes. The adjustable clamps allow the PCB to rotate 360 degrees and stay set in any position. The base of this rigid metal stand features four rubber feet to ensure stability. Specifications Product size 30 x 16.5 x 12.5 cm Max. holding size 20 x 14 cm Weight 450 g

    $12.00

    Members $10.80

  • PCW08I Precision Screwdriver Set (130 pieces)

    PCWork PCW08I Precision Screwdriver Set (130 pieces)

    Out of stock

    The PCW08I Precision Screwdriver Set is a comprehensive set with a total of 130 parts, ideal for smartphone and computer repair. It contains 117 bits made of high quality chrome vanadium steel, which is known for their durability and resistance. The set's magnetized aluminum hand holder features a lengthening rod and a 360-degree rotating cap. This allows the screwdriver to be used in different positions to easily reach hard-to-reach places. The ergonomic shape of the hand holder lies comfortably in the hand and allows a präzises work. The set is characterized by its high-quality workmanship and top quality. Each part is carefully manufactured to ensure optimal performance and durability. The flexible extension rod makes it easy to work in tight spaces and hard-to-reach places. The PCW08I Precision Screwdriver Set is the perfect gift for any hobbyist. With its numerous bits and practical accessories, it offers everything you need for repairs and assembly work. The set's attractive carrying case also ensures that all parts can be stored neatly and safely. Included Bits: Phillips bit (PH0, PH1, PH2, PH000, PH00, PH2) Flat head (SL1.0, SL1.5, SL2.5, SL3.0, SL3.5, SL4.0) Hexagon (H1.5, H2.0, H2.5,H0.7, H0.9, H1.3, H3.0, H3.5, H4.0) Torx (T2,T3,T4,T5H,T6H,T7H,T9H) Pentalobe (P2, P5, P6) Triangle (△3. 0,△2.0,△2.3) Tripple (Y0.6,Y1,Y2.0,Y2.5) Sleeve (SQ0,SQ1) U type (U2.6, U3.0) Accessories: High quality carrying case 3 long bits Flexible extension rod ESD-safe tweezers Plastic pry bar Suction cup 3 triangles Sim card opener Bit adapter for power drill

    Out of stock

    $20.00

    Members $18.00

  • Velleman Antistatic Working Mat with Grounding Cord (70 x 100 cm)

    Velleman Velleman Antistatic Working Mat with Grounding Cord (70 x 100 cm)

    3 in stock

    Specifications Surface: matte Thickness: 2 mm Conducting layer: 1.8 mm Electrostatic dissipation layer: 0.2 mm Material: Top: static dissipative rubber Bottom: conductive rubber Dimensions: 70 x 100 cm Surface resistance: Top layer: 10^6 - 10^9 Ohm Bottom layer: 10^3 - 10^5 Ohm Volume resistance: 10^5 - 10^8 Ohm Attrition rate: Charge decay: Strength: Tear strength: 20.6 KN / m Tensile strength: 3.6 Mpa Fracture elongation: 188% High temperature resistance: 200 - 300 °C Softness: 103 - 109

    3 in stock

    $41.00

    Members $36.90

  • Sensepeek 4020 PCBite 3x vergrootglas

    Sensepeek Sensepeek 4020 PCBite 3x Magnifier

    The PCBite Magnifier (premium build quality made from CNC machined aluminum) enlarges your target and makes it easier to see during soldering, inspection and measurements. Especially useful when placing PCBite hands free probes on fine pitch SMD components during measurements. 3x magnification edgeless lens for increased visibility of the work surface and AR coating (anti-reflection) to reduce reflections from nearby light sources. Optimized design, magnification and focal point for use together with the PCBite PCB holders and baseplates included in all PCBite kits. Can also be used handheld but not standalone without a metal surface as base. At the bottom of the magnifier foot there is a strong magnet perfectly balanced in strength. A low friction bottom cap protects the magnet and the baseplate to make the magnifier easy to slide when repositioning or removing the magnifier from the baseplate. Friction based adjustment of lens tilt and rotate positions takes away the need for annoying and complicated set screws.

    $84.00

    Members $75.60

Login

Forgot password?

Don't have an account yet?
Create an account