The PicoGo is a smart mobile robot based on Raspberry Pi Pico, it includes ultrasonic module, LCD module, Bluetooth module, line following module, and obstacle avoidance module, all these functions are highly integrated for easily achieving IR obstacle avoidance, auto line following, Bluetooth/IR remote control, and more. With various advanced features, it will help you fast get started with smart robot design and development. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Battery protection circuit: over charge/discharge protection, over current protection, short circuit protection, reverse proof, more stable and safe operating Recharge/Discharge circuit, allows programming/debugging concurrently while recharging 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking Onboard multiple smart robot sensors like line tracking, obstacle avoidance, no more messy wiring 1.14-inch IPS colorful LCD display, 240 x135 pixels, 65K colors Integrates Bluetooth module, allows teleoperations like robot movement, RGB LED display color, buzzer, etc. by using mobile phone APP N20 micro gearmotors, with metal gears, low noise, high accuracy Colorful RGB LED IR obstacle avoidance The module sends IR beam and detects objects by receiving the reflected IR beam, to easily avoid obstacles in the way. Auto line following Features 5-ch IR detector for sensing and analysing the black line, combined with PID algorithm for adjusting robot movement, high sensitivity, stable tracking. Ultrasonic sensor Ultrasonic is generally faster and easy-to-calculate, suitable for functions like real time control, and obstacle avoidance, with the industrial practical ranging accuracy, it is widely used on robot research and development. Object tracking The robot is able to detect front object by ultrasonic or IR, and keeps moving to track the target automatically. IR remote control Integrates IR receiver, so that you can control the robot to move or turn direction by sending infrared light from the remote controller. Bluetooth remote control Comes with mobile phone APP, allows you to use the phone to control the movement of the robot, or control its peripherals like changing LED color, making the buzzer to sound, etc. RGB LED control Included 1x PicoGo base board 1x PicoGo acrylic panel 1x 1.14-inch LCD Module 1x Ultrasonic sensor x1 1x IR remote controller 1x USB-A to micro-B cable 1.2 m 1x PH2.0 8-Pin cable 5 cm opposite side headers 1x Mini cross wrench sleeve 1x Screwdriver 1x Screws and standoffs pack Required 1x Raspberry Pi Pico (pre-soldered header) 1x 5 V/3 A power supply 2x 14500 batteries Downloads Wiki

Read more less

The JOY-iT Explorer 700 Expansion Board for Raspberry Pi expansion board has the following functions: Pin-Header to put directly on the Raspberry Pi B+, 2B, 3B or 4B UART interface: connect easily UART modules like for example RS232, RS485, USB to UART (TTL-cable) AD/DA IO interface: connected cable via screws definable 1-WIRE interface: to connect a 1-WIRE device Sensor interface: digital and analogue sensors can be connected 0.96 inch OLED display: SSD1306 Driver, 128 x 64 Pixel, SPI interface Buzzer USB to UART, converter with CP2102 chipset (mini USB-Port) PCF8591: 8-bit analog / digital converter, I²C interface BMP180: sensor for atmospheric pressure, temperature and height over normal zero, I²C interface PCF8574: I/O Chip for I²C interface DS3231: high precision RTC chip, I²C interface Power LED Programmable LED Joystick LFN0038K IR infrared receiver Interfaces UART, AD/DA: connected cables can be fixed with screws, 1-Wire, Sensor Display 0.96“ OLED Display (SSD1306 Driver, 128x64 Pixel) Dimensions 85 mm x 56 mm x 17 mm Weight 30 g For more information, check out the user manual here.

Read more less

Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, requires minimal IO pins Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 3.3 V Display color red, black, white Interface 3-wire SPI, 4-wire SPI Grey scale 2 Outline dimensions 74.00 × 37.5 0mm Full refresh time 15s Display size 60.088 × 30.704 mm Refresh power 42.4 mW (typ.) Dot pitch 0.203 × 0.202 mm Standby current <0.01 uA (almost none) Resolution 296×152 pixels Viewing angle >170° Downloads Wiki

Read more less

17 Sensor Modules & 21 Tutorials The Elecrow All-in-One Starter Kit for Raspberry Pi Pico 2 is an ideal choice for beginners embarking on their learning journey with the RP2040-based Pico 2. This comprehensive kit integrates 17 different sensors onto a single board and features a 2.4-inch full-color TFT touch screen. No soldering or wiring is required – it's ready to use right out of the box, enabling a quick and seamless start. The kit includes more than 20 creative tutorials, ranging from basic to advanced levels. These step-by-step guides help users gradually become familiar with various sensors, develop logical thinking skills, and spark creativity. Its compact, portable suitcase design makes it easy to carry and perfect for learning on the go. To enhance the learning experience, the kit also features 20 programmable full-color ambient lights and built-in mini-games, allowing for an engaging blend of education and entertainment. Features Powered by Raspberry Pi Pico 2 (RP2350 chip) Includes 17 integrated sensors with various functions, along with over 20 creative tutorials All-in-one sensor board design – no soldering required, ready to use out of the box, perfect for quick prototyping Compact and stylish portable suitcase – small, elegant, and easy to carry 2.4-inch full-color TFT touchscreen 20 programmable full-color ambient lights for dynamic visual effects Built-in mini-games – play instantly after boot-up, enabling a smooth transition between learning and fun Sensores 1x Temperature & Humidity Sensor 4x Buttons 1x Ultrasonic Ranging Sensor 1x Light Sensor 1x Linear Potentiometer 3x LEDs 1x Buzzer 1x 2.4-inch TFT Display 1x Infrared Remote 1x Relay 1x Servo motor 1x Sound Sensor 1x Accelerometer & Gyro 1x Touch Sensor 1x Vibration Motor 1x Hall Sensor 1x Gas Sensor (MQ2) Specifications All-in-one Starter Kit for Raspberry Pi Pico 2 All-in-one Starter Kit for Arduino Main Processor Raspberry Pi Pico 2 RP2350 ATmega328P Number of Sensors 17 sensors 15 sensors (including 1 Humidity sensor) Sensor Board Design Integrated sensor board, no soldering or complex wiring required Display 2.4-inch TFT full-color touch screen N/A Ambient Lights 20 full-color ambient lights, switchable via touch screen N/A Built-in Mini Games Yes No Expansion Interfaces N/A 6 Crowtail interfaces(3x I/O, 2x I²C, 1x UART) Programming Environment Based on Arduino software Number of Tutorials 21 creative tutorials Interface USB-C Dimensions 195 x 170 x 46 mm Weight 380 g 340 g Included 1x Elecrow All-in-One Starter Kit for Raspberry Pi Pico 2 1x IR Remote control 1x USB-C cable Downloads Datasheet Manual Wiki

Read more less

This Industrial 6-Channel Relay Module is suitable for Raspberry Pi Zero with pre-soldered pinheader. It provides RS485/CAN Bus, Power Supply Isolation, and Photocoupler Isolation.Features RS485 half-duplex communication: using SP3485, UART control, auto RX/TX switch CAN half-duplex communication: using MCP2515 + SN65HVD230 solution, SPI control Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal Onboard photocoupler isolation, prevent interference from external high-voltage circuit connected to the relay Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic Onboard resettable fuses and protection diodes, ensuring current/voltage stable output, preventing over current/voltage, better shock-resistance performance High quality relay, contact rating: ≤10A 250V AC or ≤10A 30V DC ABS protection enclosure with rail-mount support, easy to install, safe to use Comes with development resources and manual (wiringPi and python examples) Specifications Operating voltage: 7~36 V (industrial input voltage compatible) Relay channel: 6ch Communication Protocol: RS485, CAN Contact form: 1NO 1NC Included 1x ABS protection enclosure (top and bottom) 1x RPi Zero Relay 1x Screwdriver 1x OPTIONS 12 V, 1 A power adapter 1x Screws pack DownloadsDocumentation

Read more less

This kit includes 2 servo motors and a Monk Makes ServoSix interface board for use with Raspberry Pi. It also includes a Raspberry Leaf GPIO template, a bunch of female-to-female header pins and a 4xAA battery box.Features of the Servo Six board Screw terminals for servo power supply Reverse-polarity protection for the servo power supply 470 µF 16 V capacitor for servo supply 470 Ω current limiting resistors for servo control lines (to protect GPIO pins) Power indicator LE DownloadsInstructions

Read more less

Pico Audio Pack uses its PCM5100A DAC to output up to 32-bit, 384 KHz stereo audio along its 3.5 mm line out connector, ready for plugging into an external amp or powered speakers. If you're after something a little louder for your ears, it can also pump out amplified stereo audio from its 3.5 mm headphone jack.You could generate interesting noises with code on your Pico to output into a lo-fi synth, or hook your Pico up to another device and use it as a custom USB sound card.Features PCM5100A stereo DAC (datasheet) PAM8908JER stereo headphone amp (datasheet) 3.5 mm stereo headphone jack connector 3.5 mm stereo line out jack connector Switch to adjust headphone amp gain (low / high) Pre-soldered female headers for attaching to Pico Compatible with Raspberry Pi Pico Fully assembled No soldering required (as long as your Pico has header pins attached). Dimensions: approx 53 x 29 x 11 mm (L x W x H, including headers and audio jacks) Programmable with C/C++ The labels on the underside of Pico Audio will show you which way round to plug it into your Pico ‐ just match up the USB port with the markings on the board.

Read more less

Monitor soil moisture, temperature and relative humidity measurement with the Plant Monitor. This board is compatible with the BBC micro:bit, Raspberry Pi and most microcontroller boards. Alligator / croc clip rings Ready soldered header pins for your choice of microcontroller. Easy to use UART serial interface Additional analog output for moisture only Built-in RGB LED Downloads Datasheet Instructions

Read more less

The BME680 from Bosch Sensortec is the new, compact ambient sensor with integrated sensor technology for humidity, pressure, temperature and air quality. The I²C and SPI digital interfaces also enable simple and fast readout of the measured values. Specifications Digital interfaces I²C, SPI Operating voltage 3-5 V Compatible to Arduino, Raspberry Pi Dimensions 30 x 14 x 10 mm Weight 10 g Humidity sensor Response time 8s Accuracy tolerance ± 3% Hysteresis ≤ 1.5% Pressure sensor Pressure range 300-1100 hPa Relative accuracy ± 0.12 hPa Absolute accuracy ± 1 hPa Temperature sensor Operating range -40°C - 85°C Full accuracy 0°C - 65°C Air quality sensor Response time 1s Downloads Datasheet Manual

Read more less

The reComputer case is specially designed for the reComputer system, compatible with all popular SBCs (Raspberry Pi, BeagleBone, and Jetson Nano), with a removable acrylic cover on the top, and with a stackable structure to extend endless possibilities. Features It is compatible with the most popular SBCs including Raspberry Pi, BeagleBone and Jetson Nano. Removable top layer Acrylic Stackable case structure for expansions Included 1x Acrylic Cover 1x Aluminium Frame 1x Heat Dissipation Base 8x Side Panel 8x Standoff 12x Screws 1x Screwdriver 1x Button 1x Assembly Manual Downloads Documentation

Read more less