Arduino

12 products


  • JOY-iT Uno R3 DIP

    JOY-iT JOY-iT Uno R3 DIP

    The Uno R3 board is the perfect microcontroller for those who want to enter the programming world without any fuss. Its ATMega328 microcontroller provides you with enough power for your ideas and projects. The Uno board has a USB type B connector so that you can easily use it with programs – of course via the well-known programming environment Arduino IDE. You can connect it to the power source via the USB port or alternatively use its own power connection. Please note: The CH341 driver must be installed beforehand so that Uno board is recognized by the Arduino IDE. Microcontroller ATmega 328 Clock speed 16 MHz Operating voltage 5 V Input voltage 5-10 V Digital I/O Pins 14 with PWM 6 USB 1x SPI 1x I²C 1x ICSP 1x Flash Memory 32 KB EEPROM 1x

    € 14,95

    Members € 13,46

  • JOY-iT Mega 2560 R3

    JOY-iT JOY-iT Mega 2560 R3

    If you want to enter the programming world quickly and easily, JOY-iT Mega 2560 R3 is the board for you. Due to the abundance of tutorials and instructions for this microcontroller online, you will start programming without any complications. Based on an ATmega2560, which offers sufficient power for your projects and ideas, JOY-iT Mega 2560 R3 has many connection options with 54 digital inputs and outputs and 16 analog inputs. To start programming your JOY-iT Mega 2560 R3, you need to install the development environment, and, of course, the drivers, on your computer. The Arduino IDE is best for using with the Mega 2560. This IDE is completely compatible with this board and offers you every driver you need for a quick start. Microcontroller ATmega2560 Clock speed 16 MHz Operating voltage 5 V/DC Digital I/O Pins 54 (of which 15 with PWM) Analog Input Pins 16 Analog Output Pins 15 Flash Memory 256 KB EEPROM 4 KB SRAM 8 KB Download JOY-iT Mega 2560 R3 Starter Kit here.

    € 24,95

    Members € 22,46

  • StromPi 3 – Power Solution voor Single Board Computers

    JOY-iT StromPi 3 - Power Solution for Single Board Computers

    With the StromPi 3, JOY-iT has now released the next expansion board that's going to meet your power requirements. With a voltage range of 6-61 V and a current of up to 3 A, even larger projects can be supplied with sufficient current. The individual inputs can now be prioritised in various ways, allowing the StromPi 3 to be perfectly customised to your project. In addition to the voltage inputs already available, the new StromPi 3 can now be supplemented with an optional plug-in battery unit that adds a rechargeable emergency power source to your Raspberry Pi with a LiFePO4 battery. As a result, unexpected power outages are in the past! Along with that, the StromPi 3 now has its own configurable and autonomously acting microsystem unit, which can be used for a programmable start-stop behaviour. Let your system run up and down at preset times to perform measurements or to switch devices on and off (also ideal for digital signage or machine control). The RTC (real-time clock) contained in the microsystem can also be used to synchronize the operating Raspberry Pi without Internet access. With the new StromPi 3 you are perfectly equipped for all kinds of projects! Specifications Voltage Input Micro-USB, Wide-Range: 6-61 V Voltage Output 5 V, 3 A / RPi-PinHeader + USB Compatible to Raspberry Pi (A+, B+, 2B, 3, 3B, 3B+, 4B), Banana Pi M2, via USB output: many more single board computers like Arduino, pcDuino, Red Pitaya and many more Optional Extensions Plug-in battery pack (sold separately) with a 1000 mAh LiFePO4 battery unit Microcontroller Control Programming option by prioritizing the individual inputs in an emergency (Power Path) Addional Features RTC real-time clock (programmable start/stop behaviour), control via serial interface (data output, control), optional rechargeable battery is charged immediately during operation Dimensions 55 x 54 x 20 mm Downloads Manuals, scripts and firmware

    € 69,95

    Members € 62,96

  • JOY-iT Nano V3

    JOY-iT JOY-iT Nano V3

    The Arduino Nano is a complete Arduino-compatible single board computer that can be plugged directly into a 32-pin socket, a breadboard or a corresponding carrier board. It offers the complete Arduino functionality in very compact dimensions. Via the micro-USB socket, you can supply the board and circuit with power as well as conveniently transfer new programs to the controller. Technical details Pin headers for direct use on the pinboard Ideal for prototyping Programmable via free Arduino IDE Connection via mini USB socket Chipset CH340G Interfaces: I²C, UART, SPI Size: 45 x 18 mm Microcontroller ATmega328P-AU Operating Voltage 5 V Flash Memory 32 KB (2 KB used for Bootloader) SRAM 2 KB EEPROM 1 KB Digital Pins 22 (6 with PWM) Analog Pins 8 DC Current per I/O Pin 40 mA Input Voltage 7-12 V Downloads Datasheet User Guide

    € 11,95

    Members € 10,76

  • JOY-iT 64x64 RGB-LED Matrix Module

    JOY-iT JOY-iT 64x64 RGB-LED Matrix Module

    Display RGB-LED Resolution 64 x 64 Amount of LED 4096 LEDs LED Size 3 mm Pitch Supply Voltage 5 V Max. Power Input 40 W Control 1/32 Scan Operating Temperature -20 °C - 55 °C Viewing Angle 140° Pixel Density 111111 Pixel / m² Dimensions 192 mm x 192 mm x 14 mm Weight 246 g Items Shipped LED-Matrix, Kabel For more information, check out the user manual here.

    € 59,95

    Members € 53,96

  • JOY-iT Mega 2560 Pro

    JOY-iT JOY-iT Mega 2560 Pro

    This JOY-iT microcontroller board opens the world of programming to you and offers you the same computing power as the Mega 2560, but with a smaller foot-print. It also has many more connectors than comparable boards (Arduino Uno). It is powered by the Arduino IDE and power can be supplied either via the USB port or the VIN pins. This allows you to use it safely with many other devices, e.g. desktop PC. Therefore the Mega 2560 Pro is highly integrable. Features Microcontroller ATmega2560 - 16AU Storage Flash 256 KB, SRAM 8 KB, EEPRom 4 KB Amount of Pins:Digital I/OPWM OutputAnalog Input 541516 Compatible with Arduino, Desktop PCs, etc. Special features USB Port or Power Pins for power supply Interface converter Micro USB to USB UART Size 55 x 38 mm Items delivered JOY-iT Mega 2560 Pro with Pins Further Specifications Input Voltage 7 - 9 Volt on Vin, 5 Volt on mUSB Logic level 5 Volt Output current 800 mA Voltage regulator LDO (for up to 12 V peak) Frequency 16 MHz (12 MHz are possible for data exchange) Download Manual

    € 29,95

    Members € 26,96

  • JOY-iT Mega 2560 Microcontroller Learning Kit

    JOY-iT JOY-iT Mega 2560 Microcontroller Learning Kit

    The set consists of 86 pieces. These are a Mega 2560 microcontroller board, 2 breadboards, one USB cable, a battery holder, an IR remote control, one 4-digit segment display, 2x 1-digit segment displays, one 8x8 LED matrix, a potentiometer, one RGB LED, 5 blue LEDs, 5 yellow LEDs, 5 red LEDs, 4 buttons,a temperature sensor (LM35), 2 tilt switches, an IR receiver, one active buzzer, one passive buzzer, 3 photo resistors, a flame sensor, 18 resistors (5x 1 kΩ, 8x 220 Ω, 5x 10 kΩ), a shift register (SN74HC595N) and 30 cables. Features Model Mega 2560 Learning Kit Microcontroller ATmega 2560 R3 Projects 20 different projects Manual Incl. project manual of 63 pages as download and a printed quick reference guide Specifications Input Voltage 7-12 V Ipput Voltage (max.) 6-20 V Digital IO 54 (14 with PWM) Analog IO 16 DC Current IO 40 mA DC Current 3.3 V 50 mA Memory 256 kB (8 kB Bootloader) SRAM 8 kB EEPROM 4 kB Clock Speed 16 MHz Dimensions 11.52 x 53,3 mm

    € 54,95

    Members € 49,46

  • JOY-iT BME680 Environmental Gas Sensor

    JOY-iT JOY-iT BME680 Environmental Gas Sensor

    The BME680 from Bosch Sensortec is the new, compact ambient sensor with integrated sensor technology for humidity, pressure, temperature and air quality. The I²C and SPI digital interfaces also enable simple and fast readout of the measured values. Specifications Digital interfaces I²C, SPI Operating voltage 3-5 V Compatible to Arduino, Raspberry Pi Dimensions 30 x 14 x 10 mm Weight 10 g Humidity sensor Response time 8s Accuracy tolerance ± 3% Hysteresis ≤ 1.5% Pressure sensor Pressure range 300-1100 hPa Relative accuracy ± 0.12 hPa Absolute accuracy ± 1 hPa Temperature sensor Operating range -40°C - 85°C Full accuracy 0°C - 65°C Air quality sensor Response time 1s Downloads Datasheet Manual

    € 24,95

    Members € 22,46

  • JOY-iT 84x48 LCD Display

    JOY-iT JOY-iT 84x48 LCD Display

    This display correspond to the Nokia 5110 norm which makes it perfectly to display data or graphs of measured values on a microcontroller or a single-board computer. Additionally, the display is compatible to all Raspberry Pi, Arduino, CubieBoard, Banana Pi and microcontroller without additional effort. Specifications Chipset Philips PCD8544 Interface SPI Resolution 84 x 48 Pixels Power supply 2.7-3.3 V Special features Backlight Compatible to Raspberry Pi, Arduino, CubieBoard, Banana Pi and microcontroller Dimensions 45 x 45 x 14 mm Weight 14 g

    € 12,95

    Members € 11,66

  • Last stock! JOY-iT Robot Car Kit 01 voor Arduino

    JOY-iT JOY-iT Robot Car Kit 01 for Arduino

    1 in stock

    Enter the world of robotics without any complications and at a reasonable price with the Car Kit 01 for Arduino. This is a kit that can be used as a basic framework for a car/robot. The set is very easy to assemble and ready to go in no time. The supplied geared motors (with double-ended shaft) can be operated in a voltage range of 3 to 9 volts. The speed varies between 90 and 300 revolutions per minute. The torque (gf/cm) between 800 and 1200. The Car Kit is compatible with all Arduino boards. Note: You will also need to add other components such as a power source (batteries) and a controller such as an Arduino with a motor controller. The base plate already contains the holes for mounting an Arduino. User Manual

    1 in stock

    € 21,95

    Members € 19,76

  • JOY-iT SD-NAND Flash Memory Module (512 MB)

    JOY-iT JOY-iT SD-NAND Flash Memory Module (512 MB)

    3 in stock

    This flash memory allows you to store and read data externally via the SPI interface of your microcontroller. The control of the module is exactly the same as with a conventional SD card and is therefore particularly simple. The module is especially suitable for mobile setups, where normal SD cards could slip out of the SD card slot. Specifications Special feature 3 V and 5 V operation due to the integrated voltage converter Supply voltage Vcc 3-5 V Logic level Vcc Interface SPI Memory size 512 MB Clock frequency Up to 50 MHz Dimensions 18 x 22 x 12 mm Weight 3 g

    3 in stock

    € 14,95

    Members € 13,46

  • JOY-iT CNC Controller Shield for Arduino

    JOY-iT JOY-iT CNC Controller Shield for Arduino

    Input Voltage: 12 - 36 V Max. Phase Current: 2 A per phase Removable motor drivers Reset-button Screw terminals for power supply Dimensions: 53 mm x 68 mm x 18 mm Weight: 46 g

    € 17,95

    Members € 16,16

Buy an Arduino

What is Arduino? Why do you need an Arduino board? What are the benefits?

Arduino boards are equipped with a microcontroller, which is easy to program. The pins of this microcontroller (for example, digital inputs and outputs, and analog inputs) are connected to headers, to which you can connect other electronics without soldering. Connect buttons, potentiometers, LEDs, sensors, motors, displays and many other components and modules to quickly and easily create a prototype of the project you have in mind!

The software for the microcontroller can be developed with a program on your PC, the so-called IDE (integrated development environment). Even for beginners, the IDE is easy to understand, and so are the commands you can use to control your inputs and outputs. For many sensors and other accessories, there are powerful software libraries and samples you can use. Just connect your Arduino board to the PC via USB, write your commands, compile and send your software to the board with one click of the mouse, and see what happens. In short, it has never been easier to create a microcontroller project that includes hardware and software!

The first Arduino boards were developed around 2005 by a group of programming enthusiasts who needed cheap and simple boards for educational purposes. Because programming it was so easy, Arduino became very popular among artists and makers. In the years that followed, more and more boards were developed, some with fairly cheap 8-bit microcontrollers, others with more powerful models, and with different functions on the board such as WiFi or an Ethernet interface. In addition, a very large number of add-on boards, called shields, were developed to expand the functionality.

Arduino boards and the Arduino IDE are often used by Elektor Lab and external authors of Elektor articles and books, for a microcontroller project, or for educational purposes.

What do we offer (our range)?

In addition to many of the currently available Arduino boards Elektor offers official Arduino accessories and a selection of special and tested products from third parties, such as shields (add-on boards) and accessories. We also sell kits and bundles, for example Arduino boards in combination with a book.

Buying an Arduino board: what can you do with it?

What makes Arduino boards so special? These boards are cheap, compact and energy-saving, there are even robust variants for industrial purposes. The boards are very versatile, and there are a huge amount of shields (add-on boards) and modules to expand the functions. All connections can be made without soldering. Programming the Arduino program (called sketch) is very simple, there are many libraries and examples and quite good documentation. Projects such as weather stations, CO2 sensors, simple robots, audio players and much more are easy to implement.

Which accessories are available? What are they used for? What can you do with it?

Buying an Arduino board is just the first step. There are many shields (add-on boards, for example for motor control and lighting) and expansion modules (for example sensors) to expand the functions. Displays, power supplies, housings, cables, ... a wide variety of user-friendly accessories are available. In addition, there are many books about Arduino.

Why should you buy an Arduino from Elektor?

Elektor is an authorized distributor of Arduino. We purchase Arduino directly from the manufacturer in Italy and not through distribution channels.

More information about Arduino

Login

Forgot password?

Don't have an account yet?
Create an account