Raspberry Pi

3 products


  • SunFounder 4WD Robot Car Kit for Raspberry Pi Pico

    SunFounder SunFounder 4WD Robot Car Kit for Raspberry Pi Pico

    Out of stock

    Features The Pico Car Kit is a Raspberry Pi Pico based, cool, robotics kit for beginners (12+ Teens) and adults to learn Raspberry Pi Pico programming, electronics assembling and robotics knowledge. (Raspberry Pi Pico with pre-soldered GPIO pins is included.) The Raspberry Pico Car is equipped with a variety of module, ultrasonic module, grayscale sensor, speed sensor, etc and three 8-bit WS2812 RGB boards. In addition, this 4-wheel drive car with Pico RDP also can be DIY interesting functions. The Pico robot building kit can perform Obstacle Avoidance, Object Tracking, Speed Measurement, Mileage Calculation, Line Following and Cliff Detection. In addition, the car is surrounded by three 8-bit WS2812 RGB boards that are capable of displaying cool light effects and direction indications. In addition to providing MicroPython code and tutorials, the customizable application SunFounder Controller is also provided to control this robotic kit. The Raspberry Pi Pico-4WD robot car kit is completely Open Source, providing structure diagrams, module schematics and source code. Includes 3 8-Bit WS2812 RGB Boards Strip. Each LED can be Independently Controlled to Display a Myriad of Colors. Package List Raspberry Pi Pico × 1 Speed Module × 1 Grayscale Semsor Module × 1 8-Bit WS2812B RGB × 3 Pico RDP × 1 Encoder Disk × 2 Ultrasonic Module × 1 Motor × 4 Servo × 1 Top Plate × 1 Bottom Plate × 1 Support × 4 Radar support × 1 R2056 Rivet × 4 R2655 Rivet × 12 R3055 Rivet × 6 Battery Holder × 1 Wheel × 4 M1.5x 4 Self-tapping Screw × 4 M3x8 Self-tapping Screw × 4 M1.4x6 Screw × 6 M2.5x6Screw × 10 M3x6 Screw × 12 M3x28 Screw × 10 M1.4 Nut × 6 M3 Nut 6 × 12 M2.5 x 11Standoff × 6 M3X30 Standoff × 7 Screwdriver × 1 5-pin Wire × 2 4-pin Wire × 4 3-pin Wire × 5 Riboon × 1 USB Cable × 1 Zip Tie × 4 Online Tutorial https://docs.sunfounder.com/projects/pico-4wd-car

    Out of stock

    € 84,95

    Members € 76,46

  • SunFounder PiCar-4WD Raspberry Pi Car Robot Kit

    SunFounder SunFounder PiCar-4WD Raspberry Pi Car Robot Kit

    Out of stock

    SunFounder PiCar-4WD is a very cool raspberry pi robot kit designed for both Raspberry Pi beginners and professionals to learn electronic kits. It is suitable for the Raspberry Pi 4B and 3 Model B+/ 3B. With the grayscale module, ultrasonic module, Photo-interrupter sensor module, the car can realize obstacle avoidance, line-following, object following, cliff detection, velocity measurement, mileage calculation, and so on.In addition, this new raspberry pi smart car with a tutorial make you easy to assemble this robot car kit, we have written a friendly browser software that quickly turns on/off and freely combines the above-mentioned various functions. U will see a cool appearance car kit to learn electronics, programming, and robotics.If you are interested in autonomous driving, you should own a SunFounder PiCar-4WD! Features 【PROGRAMMING LANGUAGES & VARIOUS MODULES】The Raspberry Pi robot be programmed by Python language. It comes with four sensor modules including 4WD HAT Module, Velocity Measurement Module, 3-ch Grayscale Sensor Module, and 3.3V Ultrasonic Module【MULTIPLE FUNCTIONS】The Multifunctional SunFounder 4WD Smart Car supports multiple functions: Obstacle Avoidance; Line Following; Object Following; Cliff Detection; Velocity Measurement; Mileage Calculation; Radar Sampling. In addition, It has 4 powerful motors, create more power than SunFounder PicarV and PicarS.【WEB CONTROL】The Raspberry Pi Car can be controlled by Android and iOS Mobile to get web remote control, only need your phone can connect the Internet. It compatible with PC (use keyboard control) /Phone (recommended)/Tablet, make robot kits easy, make robot kits fun.【FRIENDLY DESIGN】It comes with a user manual, including operational examples of web terminal, also provides the original python code for in-depth learning. Package List Electronic Parts1 x 4WD HAT Module1 x 2-ch Photo-interrupter Module(Velocity Measurement Module)1 x 3-ch Grayscale Sensor Module1 x 3.3V Ultrasonic Module Other Parts1 x Connection Wire(Grayscale Sensor Module)1 x Connection Wire(Ultrasonic Module)1 x Connection Wire(Photo-interrupter Module)1 x Ribbon4 x Cable Tie1 x Screwdriver4 x Wheels 1 x Battery Holder Driving Parts 4 x Motor1 x Servo Structural Plates1 x Top Plate1 x Bottom Plate2 x Spoiler4 x Support1 x Radar support Mechanical Parts4 x M1.5*4mm Self-tapping Screw6 x M1.4*8mm Screw4 x M2*10 mm Screw10 x M2.5*6mm Screw4 x M3*8mm Flat-head16 x M3*8mm Screw10 x M3*28mm Screw6 x M1.4 Nut4 x M2 Nut18 x M3 Nut6 x M2.5*11mm Bi-pass Nylon Standoff2 x Encoding Disk6 x M2.5*8+6mm Single-pass Nylon Standoff6 x M3*30mm Bi-pass Nylon Standoff

    Out of stock

    € 139,95

    Members € 125,96

  • SunFounder Kepler Kit (Ultimate Starter Kit for Raspberry Pi Pico W)

    SunFounder SunFounder Kepler Kit (Ultimate Starter Kit for Raspberry Pi Pico W)

    Out of stock

    Your gateway to IoT and microcontroller programming With 450+ components and 117 online projects, this comprehensive kit ignites your creativity. The tutorials by Paul McWhorter make learning enjoyable for beginners and advanced users. This kit supports MicroPython, C/C++, and Piper Make, offering diverse programming options. Explore sensors, actuators, LEDs, and LCDs for endless project possibilities. From home automation to robotics, this kit empowers your tech journey. Features IoT Starter Kit for Beginners: This kit offers a rich IoT learning experience for beginners. With 450+ components, 117 projects, and expert-led video lessons, this kit makes learning microcontroller programming and IoT engaging and accessible. Expert-Guided Video Lessons: The kit includes 27 video tutorials by the renowned educator, Paul McWhorter. His engaging style simplifies complex concepts, ensuring an effective learning experience in microcontroller programming. Wide Range of Hardware: The kit includes a diverse array of components like sensors, actuators, LEDs, LCDs, and more, enabling you to experiment and create a variety of projects with the Raspberry Pi Pico W. Supports Multiple Languages: The kit offers versatility with support for three programming languages - MicroPython, C/C++, and Piper Make, providing a diverse programming learning experience. Dedicated Support: Benefit from our ongoing assistance, including a community forum and timely technical help for a seamless learning experience. Included Raspberry Pi Pico W Breadboard Jumper Wires Resistor Transistor Capacitor Diode Li-po Charger Module 74HC595 TA6586 – Motor Driver Chip LED RGB LED LED Bar Graph 7-segment Display 4-Digit 7-Segment Display LED Dot Matrix I²C LCD1602 WS2812 RGB 8 LEDs Strip Buzzer DC Motor Servo DC Water Pump Relay Button Micro Switch Slide Switch Potentiometer Infrared Receiver Joystick Module 4x4 Keypad MPR121 Module MFRC522 Module Photoresistor Thermistor Tilt Switch Reed Switch PIR Motion Sensor Module Water Level Sensor Module Ultrasonic Module DHT11 Humiture Sensor MPU6050 Module Documentation Online Tutorials in 3 languages (EN, DE and JP)

    Out of stock

    € 69,95

    Members € 62,96

Buy a Raspberry Pi

What is Raspberry Pi? Why do you need a Raspberry Pi board? What are the benefits?

Raspberry Pi is a minicomputer or a so-called Single Board Computer (or SBC for short) from the Raspberry Pi Foundation from Cambridge (GB). In a single-board computer, all important components such as the processor, RAM and GPU are mounted on one board.

The foundation published the first Raspberry Pi version in 2012 with the idea of promoting computer science as a school and study subject. The main goal to achieve this was a retail price of $35 that should be affordable for everyone.

Elektor also wanted to arouse early interest in computer science and electronics among pupils and students. As an official Raspberry Pi reseller, Elektor has direct personal contact with the Raspberry Pi developers in Cambridge and with the actual intellectual father of the Raspberry Pi, Eben Upton. Elektor not only offers official Raspberry Pi hardware, but also offers its customers interesting first-hand projects, reviews, tutorials and specialist books. Elektor thus occupies a special position among all Raspberry Pi dealers.

Our Raspberry Pi range

In addition to the currently available Raspberry Pi boards Elektor offers you official Raspberry Pi accessories and a carefully selected selection tested third party products (construction kits, HATs, power supplies, cases, displays, cameras, books and miscellaneous. We also have an extensive range of RP2040 products based on the RP2040 microcontroller chip developed by the Raspberry Pi Foundation.

Buying a Raspberry Pi board: what can you do with it?

What makes the Raspberry Pi so special? This small, full-fledged, credit card-sized computer has won the hearts of software and hardware developers around the world and continues to reinvent itself with each new hardware version. With more than 20 million boards sold, Raspberry Pi has turned the electronics world upside down. It doesn't matter if you are a beginner or a professional developer, Raspberry Pi is the universal tool for every electronics technician! Use the Raspberry Pi for your own developments, control your smart home products with it or use it as a media player in the living room for streaming. Raspberry Pi cuts a fine figure in every area. The application possibilities are almost endless. The steadily growing community develops fun, but above all useful projects that are easy to make yourself.

Raspberry Pi accessories

Buying a Raspberry Pi is just the first step. As an official Raspberry Pi reseller, Elektor not only offers the Raspberry Pi, but also the necessary accessories and extensions to benefit as much as possible from the compact Raspberry Pi. At Elektor you will find power supplies, housings (with or without fans), kits, sensors, robots, cameras, displays, books, HATs and other expansion cards to help realize your projects.

Smart Home projects with Raspberry Pi

Today, a Smart Home is one of the most used applications for the Raspberry Pi. The reason for this is logical because a Smart Home provides more comfort in the home and makes saving on energy costs easy. Below you will find three of the most commonly used applications of Raspberry Pi in a Smart Home environment

Home automation system

The Raspberry Pi can be used to build a home automation system that allows you to perform tasks automatically. This includes controlling lighting, heating, entertainment and air conditioning.

Home monitoring

Home monitoring is a system that uses sensors to take measurements of your home environment and transmit this information to a central device. The system can take measurements of: temperatures, humidity, light intensity and movement. Use home monitoring to monitor your home environment, allowing you to use alarm systems, security cameras and other devices to protect your home.

A good example of this is when you close your roller shutters automatically as soon as it threatens to get too hot. This way you can easily restore the heat in your home.

Smart switches

A smart switch is a device used to turn electrical appliances on and off remotely. It is a wireless device that is connected to your home network and can be controlled with a mobile app, a remote control or a voice assistant.

A good example of smart switches combined with Raspberry Pi is turning off lights when you watch a movie via Kodi. You can even go so far that when you pause the movie, the lights come back on.

Buy your Raspberry Pi from Elektor

Elektor is an official reseller approved by the Raspberry Pi Foundation. We only obtain the Raspberry Pi directly from the manufacturer/developer and not from a distributor. New products are immediately available from stock on the day of publication. By eliminating the middleman, we can offer the Raspberry Pi and other official accessories at the lowest possible price.

Login

Forgot password?

Don't have an account yet?
Create an account