Raspberry Pi HATs

With the StromPi 3, JOY-iT has now released the next expansion board that's going to meet your power requirements. With a voltage range of 6-61 V and a current of up to 3 A, even larger projects can be supplied with sufficient current. The individual inputs can now be prioritised in various ways, allowing the StromPi 3 to be perfectly customised to your project. In addition to the voltage inputs already available, the new StromPi 3 can now be supplemented with an optional plug-in battery unit that adds a rechargeable emergency power source to your Raspberry Pi with a LiFePO4 battery. As a result, unexpected power outages are in the past! Along with that, the StromPi 3 now has its own configurable and autonomously acting microsystem unit, which can be used for a programmable start-stop behaviour. Let your system run up and down at preset times to perform measurements or to switch devices on and off (also ideal for digital signage or machine control). The RTC (real-time clock) contained in the microsystem can also be used to synchronize the operating Raspberry Pi without Internet access. With the new StromPi 3 you are perfectly equipped for all kinds of projects! Specifications Voltage Input Micro-USB, Wide-Range: 6-61 V Voltage Output 5 V, 3 A / RPi-PinHeader + USB Compatible to Raspberry Pi (A+, B+, 2B, 3, 3B, 3B+, 4B), Banana Pi M2, via USB output: many more single board computers like Arduino, pcDuino, Red Pitaya and many more Optional Extensions Plug-in battery pack (sold separately) with a 1000 mAh LiFePO4 battery unit Microcontroller Control Programming option by prioritizing the individual inputs in an emergency (Power Path) Addional Features RTC real-time clock (programmable start/stop behaviour), control via serial interface (data output, control), optional rechargeable battery is charged immediately during operation Dimensions 55 x 54 x 20 mm Downloads Manuals, scripts and firmware

Read more less

MODEL Port-Doubler FUNCTION Provides 4 GPIO bars CONNECTIVITY Attaches directly to the existing GPIO bar of the Raspberry Pi DIMENSIONS 55 x 66 mm WEIGHT 30 g ITEMS SHIPPED Port-Doubler, Mounting material EAN 4250236817057 ARTICLE NO. RB-Port-Doubler

Read more less

The JOY-iT Explorer 700 Expansion Board for Raspberry Pi expansion board has the following functions: Pin-Header to put directly on the Raspberry Pi B+, 2B, 3B or 4B UART interface: connect easily UART modules like for example RS232, RS485, USB to UART (TTL-cable) AD/DA IO interface: connected cable via screws definable 1-WIRE interface: to connect a 1-WIRE device Sensor interface: digital and analogue sensors can be connected 0.96 inch OLED display: SSD1306 Driver, 128 x 64 Pixel, SPI interface Buzzer USB to UART, converter with CP2102 chipset (mini USB-Port) PCF8591: 8-bit analog / digital converter, I²C interface BMP180: sensor for atmospheric pressure, temperature and height over normal zero, I²C interface PCF8574: I/O Chip for I²C interface DS3231: high precision RTC chip, I²C interface Power LED Programmable LED Joystick LFN0038K IR infrared receiver Interfaces UART, AD/DA: connected cables can be fixed with screws, 1-Wire, Sensor Display 0.96“ OLED Display (SSD1306 Driver, 128x64 Pixel) Dimensions 85 mm x 56 mm x 17 mm Weight 30 g For more information, check out the user manual here.

Read more less

With our Proto+ prototype circuit board your own designs and projects can be implemented easily. The board is equipped with all popular connectors and also has a built-in breadboard for quick implementation of your ideas and developments.The built-in GPIO bar allows the expansion board to be easily plugged onto a Raspberry Pi and can be used immediately. The supplied screws and spacers allow the PCB to be connected directly to the Raspberry Pi. The screw terminals are already installed and facilitate the use and fast experimenting. MODEL Proto+ Prototyp-Board AVAILABLE CONNECTIONS GPIO (40-pole), SOIC16, Breadboard, 2x 3,3V, 2x 5V, UART, I2C, SPI NOTICE The outter screw terminals are connected to the GPIO connectors. COMPATIBLE TO Raspberry Pi B+, 2, 3 DIMENSIONS 55 x 85 mm WEIGHT 44 g ITEMS SHIPPED Proto+ Board, Screws, Spacers EAN 4250236814797 ARTICLE NO. RB-Proto+

Read more less

The MotoPi is an extension-board to control and use up to 16 PWM-controlled 5 V servo motors. The board can be additional powered by a voltage between 4.8 V and 6 V so a perfect supply is always guaranteed and even larger projects can be powered. With the additional power supply and the integrated Analog-Digital-Converter, new possibilities can be reached. An additional power supply per motor is not required anymore because all connections (Voltage, Ground, Control) are directly connected to the board. The control and the programing can be directly done, as usual, on the Raspberry Pi. Special features 16 Channels, own clock generator, Inkl. Analog Digital Converter Input 1 Coaxial power connector 5.5 / 2.1 mm, 5 V / 6 A max Input 2 Screw terminal, 4.8-6 V / 6 A max Compatible with Raspberry Pi A+, B+, 2B, 3B Dimensions 65 x 56 x 24 mm Scope of supply Board, manual, fixing material

Read more less

The JOY-iT Explorer 500 Expansion Board for Raspberry Pi expansion board has the following functions: Pin-Header to put directly on the Raspberry Pi B+, 2B or 3B UART interface: you can easily connect UART modules like for example RS232, RS485, USB to UART (TTL-cable) 8x I/O interface: you can easily connect with I/O controlled modules SPI interface for SPI controlled modules I²C interface for I²C controlled modules LCD interface for HD44780 industrial standard LCD module USB to UART, converter with CP2102 chipset (mini USB port) Power LED 4x programmable LED 4x programmable buttons Potentiometer: control of contrast for LCD displays (point 6) RTC battery holder 32.768K quartz: RTC quartz CP2102: onboard USB to UART chip for debugging CP2102: Jumper for: on / off RTC: Jumper for: on / off User LEDs Jumper for: on / off (point 9) User keys Jumper for: on / off (point 10) It can be directly plugged onto the Raspberry. Interfaces UART, 8x I/O, SPI, I²C, HD44780 Industry-Standard-LCD RTC Battery-Holder, PCF8564-RTC-Chip incl. 32.789K RTC-Quartz Jumper (ON / OFF) RTC, CP2102 (USB to UART), User LEDs, User Keys Dimensions 85 mm x 17 mm x 56 mm Weight 36 g For more information, check out the user manual here.

Read more less