Oscilloscopes

2 products

Filter

  • Last stock! UNI-T UPO1202CS 2-ch Oscilloscope (200 MHz)

    Uni-Trend UNI-T UPO1202CS 2-ch Oscilloscope (200 MHz)

    2 in stock

    UNI-T UPO1202CS is a multifunctional, low-cost 2-channel digital phosphor oscilloscope with 200 MHz bandwidth and 1 GSa/s sampling rate. It can be widely used in the fields of electronic and electrical design, debugging, education and industrial design. UPO1000CS series adopts parallel digital signal processing technology, which greatly improves the data processing speed and waveform capture rate. The original Ultra Phosphor technology can present the cumulative effect of the tested signal as a multi-layered afterglow. Compared with traditional digital storage oscilloscopes, the persistence of digital phosphor oscilloscopes can present three-dimensional waveform data of amplitude, time and signal intensity. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and runt signals. Specifications UPO1102CS UPO1202CS Bandwidth 100 MHz 200 MHz Analog channels 2 2 Sampling rate 1 GSa/s 1 GSa/s Storage depth 56 Mpts per channel 56 Mpts per channel Rise time ≤3.5ns ≤1.8ns Capture rate 500,000 wfms/s 500,000 wfms/s Waveform record 100,000 frames 100,000 frames Features 7' WVGA (800 x 480) TFT LCD Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display Support RS232, I²C, SPI, CAN and LIN trigger Innovative RS232, I²C, SPI, CAN and LIN hardware decoding Vertical scale: 1 mV/div-20 V/div Low background noise: <100 μVrms 1M points enhanced FFT function. Support frequency setting, waterfall diagram, detection setting and marker measurement etc 36 kinds of waveform parameters can be automatically measured Rich trigger functions (edge, pulse width, video, slope, runt, overshoot, delay, timeout, duration, setup and hold, Nth edge and pattern trigger) Multi-Scopes support dual-channel independent trigger fluorescence display Multi-channel independent 7-bit hardware frequency counter DVM supports dual-channel independent AC and DC true RMS measurement Waveform arithmetic functions (FFT, +, -, ×, ÷, digital filtering, logic operations, and advanced operations) Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail) Support SCPI programmable instrument standard command Support WEB access and control Downloads Datasheet Programming Manual User's Manual Quick Start Guide Software

    Read more

    2 in stock

    € 439,00

    Members € 395,10

  • UNI-T UPO1102CS 2-ch Oscilloscope (100 MHz)

    Uni-Trend UNI-T UPO1102CS 2-ch Oscilloscope (100 MHz)

    UNI-T UPO1102CS is a multifunctional, low-cost 2-channel digital phosphor oscilloscope with 100 MHz bandwidth and 1 GSa/s sampling rate. It can be widely used in the fields of electronic and electrical design, debugging, education and industrial design. UPO1000CS series adopts parallel digital signal processing technology, which greatly improves the data processing speed and waveform capture rate. The original Ultra Phosphor technology can present the cumulative effect of the tested signal as a multi-layered afterglow. Compared with traditional digital storage oscilloscopes, the persistence of digital phosphor oscilloscopes can present three-dimensional waveform data of amplitude, time and signal intensity. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and runt signals. Specifications UPO1102CS UPO1202CS Bandwidth 100 MHz 200 MHz Analog channels 2 2 Sampling rate 1 GSa/s 1 GSa/s Storage depth 56 Mpts per channel 56 Mpts per channel Rise time ≤3.5ns ≤1.8ns Capture rate 500,000 wfms/s 500,000 wfms/s Waveform record 100,000 frames 100,000 frames Features 7' WVGA (800 x 480) TFT LCD Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display Support RS232, I²C, SPI, CAN and LIN trigger Innovative RS232, I²C, SPI, CAN and LIN hardware decoding Vertical scale: 1 mV/div-20 V/div Low background noise: <100 μVrms 1M points enhanced FFT function. Support frequency setting, waterfall diagram, detection setting and marker measurement etc 36 kinds of waveform parameters can be automatically measured Rich trigger functions (edge, pulse width, video, slope, runt, overshoot, delay, timeout, duration, setup and hold, Nth edge and pattern trigger) Multi-Scopes support dual-channel independent trigger fluorescence display Multi-channel independent 7-bit hardware frequency counter DVM supports dual-channel independent AC and DC true RMS measurement Waveform arithmetic functions (FFT, +, -, ×, ÷, digital filtering, logic operations, and advanced operations) Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail) Support SCPI programmable instrument standard command Support WEB access and control Downloads Datasheet Programming Manual User's Manual Quick Start Guide Software

    Read more

    € 359,00

    Members € 323,10

What is an oscilloscope? What are the advantages of a digital oscilloscope?

Oscilloscopes are electronic instruments that allow us to visualize different signals as a function of time on a 2D plot. Oscilloscopes come in a variety of sizes and can allow anyone with an interest in electronics – from students to makers to craftsmen – to discover how waveforms vary as a circuit is adjusted.

A digital oscilloscope is a useful tool for analyzing the response of a circuit, and it allows us to see on the screen what our eyes cannot see. With a digital oscilloscope you can test and debug the analog outputs of sensors, and you can verify and quickly analyze various parameters such as amplitude, frequency, and distortion.

When you look at an oscilloscope, you see the screen and the buttons for the vertical settings, the horizontal settings and the triggering. The display is usually a cathode ray tube (CRT), which is used not only for oscilloscopes, but also for other applications such as television and computer monitors. Its function is to convert an electrical signal into a visual representation.

What types of oscilloscopes are there? And what are the differences?

Today, digital oscilloscopes are the most popular type. An analog oscilloscope displays the waveform in its original form, while a digital oscilloscope samples the original analog waveform and converts the result into digital numbers, then stores it in digital format.

Another important type of oscilloscope is the USB oscilloscope. It is operated via a computer or tablet using a USB port. The USB oscilloscope has one or more analog channels, possibly digital channels, and buttons or switches for operation.

USB oscilloscopes are less expensive than traditional ones because the graphics are provided by the host PC. An A/D converter and a USB interface are all that is needed for a USB oscilloscope. Furthermore, USB oscilloscopes are usually small and can be used in places where access is limited. Moreover, they are a great solution for applications that require flexibility, as they are a great portable option.

An automotive oscilloscope is a necessary instrument for detecting malfunctions in all kinds of electronic components in vehicles. Moreover, it is often used by car technicians for car diagnostics. The only difference between an automotive oscilloscope and a digital oscilloscope is that it offers additional capabilities for testing and diagnosis.

What is a PicoScope?

PicoScope is computer software that allows Pico Technology oscilloscopes to measure real-time signals. A PicoScope PC oscilloscope is an application for measuring and testing all electrical components and circuits in vehicles. Your PC can become a powerful diagnostic tool with the help of a PicoScope.

Buy an oscilloscope. What does Elektor have to offer?

An oscilloscope is an essential tool for anyone who works with electronic circuits. It is useful if you want to get to know the behavior of your project and detect errors in your circuits.

Elektor offers a wide choice of oscilloscopes in various sizes and with varying specifications, including bandwidth, vertical resolution, and horizontal scale. In addition, we offer a selection of oscilloscopes that are very suitable for a number of areas of interest. Some of the most popular products Elektor sells are the PicoScope 2204A USB Oscilloscope and the SmartScope USB oscilloscope, which provide a complete electronics lab in one compact, low-cost, USB-powered device. The affordable PicoScope and SmartScope models are ideal for education, hobby and field use.

What accessories are there for oscilloscopes?

Digital oscilloscopes usually come with a set of probes. In addition to scopes, Elektor sells a range of related products, including cables and DIY kits.

Why should you buy an oscilloscope from Elektor?

Electrical engineers, makers and electronics enthusiasts turn to Elektor for affordable, high-quality test and measurement equipment such as oscilloscopes. We stock a range of oscilloscopes – from portable handheld devices to high-end desktop solutions – to meet the different needs of a wide audience.

Login

Forgot password?

Don't have an account yet?
Create an account