Measuring Tools

1 product

Filter

  • MonoDAQ-U-X Multifunctional USB Data Acquisition System (50 kS/s)

    Out of stock

    MonoDAQ MonoDAQ-U-X Multifunctional USB Data Acquisition System (50 kS/s)

    Out of stock

    MonoDAQ-U-X is powered from the USB-C port on the backplane, therefore a single USB-C cable is needed for communication and power supply. Power and communication signals are isolated directly after the USB connector, which makes the microcontroller and the front end of the device fully galvanically isolated. Front-end connector features 8 multifunctional pins that can be configured as analog inputs or outputs or as digital inputs or outputs. Front-end is configured with the help of a channel setup table in DEWESoft software.At the core of the measurement chain is a sigma-delta ADC with a maximum sample rate of 50 kS/s (16 bit) and a maximum resolution of 20 bit (100 S/s). If only one input channel is used, the signal is alias-free with a bandwidth of 0.4*fs (sampling frequency). If multiple analog input channels are used, the signals are multiplexed in front of the ADC. It is possible to select up to 8 single-ended voltage inputs and up to 4 differential voltage inputs. Half of the channels can have a high input range of 10 V while the other half is limited to 2 V since there is no voltage divider on those channels.Specifications Power and signal isolation between USB and front-end Max. sample rate: 50 kS/s (16 bit), max. resolution: 20 bit (100 S/s) Can connect up to 2 full bridge strain gauges or up to 4 thermocouples Max. 4 differential or 8 single-ended voltage inputs Current input with internal shunt (0.5 Ω) Analog output (+/- 4 V, 14 bit, 50 kS/s) Max. 8 digital inputs or outputs 1 wire, I²C and UART interface on the front connector Internal humidity sensor Internal IMU (3-axial accelerometer and 3-axial gyroscope) Typical applications Embedded loT system power consumption measurement Analog measurement front end for industrial machines and test benches Strain measurement in industrial quality control Industrial condition monitoring (voltage, temperature, current) Precision measurement front end for single-board computers (Raspberry Pi, LattePanda etc.) Precise laboratory power supply for board development Synchronization between devicesMultiple MonoDAQ-U-X devices can be connected to the same PC by using a multiport USB hub. Synchronization between devices is ensured if all of the devices are connected to the same hub.Software supportMonoDAQ-U-X is supported in DEWESoft X3 data acquisition software. On this page, you'll find some of the key functionalities of DEWESoft that are the most important ones for MonoDAQ users as well as additional links to DEWESoft page for in-depth info.For custom applications the device is also supported in Isotel IDM cross-platform software package based on Java. IDM can be installed on any operating system supporting Java and provides the basic interface to the device for configuration and data streaming. There is Python API available to access the device through IDM software.Included 1x MonoDAQ-U-X (50 kS/s) 1x USB-C to USB-A cable 1x Push-in wire terminal DEWESoft X3 LT Life License with FREE updates

    Read more

    Out of stock

    € 469,00

    Members € 422,10

    Out of stock

Discover Elektor's measuring instruments collection

Elektor is the place for professionals and enthusiasts involved in electronics. We not only offer a source of education and inspiration, but also an extensive range of measuring instruments. These tools are essential for anyone who wants to take their projects to the next level of precision. Whether you are working on a complex design or testing a basic component, Elektor measuring instruments guarantee reliability and quality.

Essential measuring tools for your Projects

Elektor understands that good measuring instruments are the heart of every electronics project. That is why we have a wide range of oscilloscopes, multimeters, signal generators and more in our range. These tools have been carefully selected to meet the needs of both the hobbyist and the professional. With our measuring instruments you can tackle any electronics challenge with confidence.

In the rapidly changing world of electronics, it is crucial to have access to the latest technology. Our measuring instruments are equipped with the latest developments in electronics, so that you are always ahead of the curve. At Elektor you will find everything you need to support your electronics projects, from simple tools to advanced measuring equipment.

More than just measuring instruments

At Elektor it is more than just offering tools; we provide a community and a platform for knowledge sharing. In addition to measuring instruments, Elektor magazine offers ideas, information and inspiration for your next project. We are a source of innovation for electronics designers, both for professional use and for hobby projects.

Order your measuring instruments from Elektor

  • Quality and Diversity: An extensive range of high-quality measuring instruments.
  • Competitive Prices: Competitive prices with extra benefits for Elektor members.
  • Expertise and Support: Years of experience in electronics and a reliable source of knowledge and inspiration.

Prepare for success in your electronics projects with Elektor measuring instruments. Visit our collection today and find the perfect tools to suit your needs. With Elektor you choose quality, innovation and a community that is as passionate about electronics as you are.

Login

Forgot password?

Don't have an account yet?
Create an account