ESP32

1 product

Filter

  • ESP Terminal (ESP32-S3 based Development Board with 3.5' Capacitive TFT Touch Display)

    Elecrow ESP Terminal (ESP32-S3 based Development Board with 3.5" Capacitive TFT Touch Display)

    This ESP32 terminal is a microcontroller based on the ESP32 master. It adopts Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240 Mhz, supports 2.4 GHz Wi-Fi and Bluetooth 5 (LE), and can easily handle common edge terminal device application scenarios, such as industrial control, agricultural production environment detection and processing, intelligent logistics monitoring, smart home scenarios and more. The ESP32 module also has a 3.5-inch parallel RGB interface capacitive touch screen with a resolution of 320x480 to ensure perfect image output at a frame rate 60 FPS. The 4 Crowtail interfaces on the back of this terminal can be used with Crowtail series sensors, plug and play, and create more interesting projects quickly and conveniently. In addition, it is also equipped with an SD card slot for extended storage (SPI leads) and a buzzer function. The ESP32 touchscreen supports ESP-IDF and Arduino IDE development and is compatible with Python/MicroPython/Arduino. It also supports LVGL, which is the most popular free and open-source embedded graphics library to create beautiful UIs for any MCU, MPU, and display type. Now it has also obtained the official certification of LVGL. LVGL's board certificate shows that the boards can be easily used with LVGL and has decent performance for UI applications. The onboard charging circuit and lithium battery interface can use the type-C power supply interface to supply power and charge the battery at the same time, providing more outdoor scene expansion possibilities. Features Integrated ESP32-S3 module, which is support 2.4 GHz Wi-Fi and Bluetooth 5 (LE) LCD 3.5 inches parallel TFT-LCD with 320x480 resolution Compatible with Arduino/Python/MicrmoPython Mature software support, support ESP-IDF and Arduino IDE development Support open-source Graphics Library-LVGL Support 1T1R mode, data rate up to 150 Mbps, Wireless Multimedia (WMM) Perfect security mechanism, support AES-128/256, Hash, RSA, HMAC, digital signatures and secure boot Onboard charging chip and interface, use type-C interface to charge With 4 Crowtail interfaces (HY2.0-4P connector), plug and play with various Crowtail sensor Applications Smart Home Industrial Control Medical Monitor Home Appliance Display Logistics Monitoring Specifications ESP32-S3 module with 16 MB Flash and 8 MB PSRAM Wi-Fi Protocol: 802.11b/g/n (802.11n up to 150 Mbps) Wi-Fi Frequency Range: 2.402-2.483 Ghz Support Bluetooth 5 With 4 Crowtail interfaces (HY2.0-4P connector) and onboard Micro TF card slot 3.5-inch TFT LCD RGB true color LCD screen with 320x480 resolution Driver chip: ILI9488 (16-bit parallel line) Capacitive touch panel controller IC FT6236 series Operating Voltage: DC 5 V-500 mA Sleep current: USB power supply: 6.86 mA Lithium battery power supply: 3.23 mA LiPo Battery Interface: PH2.0 Operating temperature: -10°C ~ 65°C Active Area: 73.63 x 49.79 mm (L x W) Dimensions: 106 x 66 x 13 mm (L x W x H) Included 1x 3.5-inch ESP RGB Display with Acrylic Shell 1x USB-C Cable Downloads Wiki Schematic Diagram 16 learning Lessons for LVGL Source code Lesson code LVGL Reference ESP32-S3 Datasheet ILI9488 Datasheet Capacitive Touch Display Data

    Read more

    € 44,95

    Members € 40,46

The ESP32 is a chip designed for mobile, wearable electronics and Internet-of-Things (IoT) applications. It's packed with all the state-of-the-art low-power features you need, including clock gating, multiple power modes and dynamic power scaling.

Microcontroller with Wi-Fi and Bluetooth

The ESP32 is a highly integrated chip that combines Wi-Fi and Bluetooth capabilities with a powerful CPU and memory. It is ideal for applications that require low power consumption, such as sensors and wearable devices.

ESP32 offers two CPU cores that can be controlled separately, clocked up to 240 MHz, and each equipped with its own set of peripherals. In addition to the CPU cores, the ESP32 has a special Tensilica LX6 microprocessor for ultra-low power co-processing.

ESP32 module and applications

The ESP32 module can be used in different ways. The most popular ways to use the ESP32 in a project is:

ESP32 as Arduino compatible board

The ESP32 can be used as an Arduino compatible board. This means you can use the Arduino IDE to develop applications for the ESP32. The ESP offers users the ability to make WiFi and Bluetooth connections.

ESP32 as a standalone microcontroller

The ESP32 can also be used as a standalone microcontroller. This means you can develop applications for the ESP32 without using the Arduino IDE. The ESP32 is a good choice for many Internet of Things applications. The built-in WiFi and Bluetooth make it perfect for wireless applications.

Internet of Things projects with ESP32

The ESP32 is a great choice for many Internet of Things applications. The built-in WiFi and Bluetooth make it perfect for wireless applications. The ESP32 is also a very popular microcontroller for hobbyists. Some popular applications for the ESP32 are:

  • Home automation
  • IoT devices
  • Wearable electronics

Manual and books about ESP32

When you work with ESP modules for the first time, it is nice to receive an explanation so that you become familiar with the possibilities and projects with ESP32 technology. The Official ESP32 Book is a book that takes you step by step as a beginner. The Elektor ESP32 Smart Kit offers beginners everything they need to follow the projects in the book.

Login

Forgot password?

Don't have an account yet?
Create an account