Cables & Wires

6 products

  • SparkFun Qwiic Cable Kit

    SparkFun SparkFun Qwiic Cable Kit

    Out of stock

    The SparkFun Qwiic Cable Kit includes 10 cables of various lengths and styles that will get your Qwiic boards connected to a development platform or a breadboard. Each Qwiic Cable's wires have been colour-coded to red, black, blue and yellow with 1mm JST termination. Included 3 x Qwiic Cable - 50 mm 3 x Qwiic Cable - 100 mm 1 x Qwiic Cable - 200 mm 1 x Qwiic Cable - 500 mm 1 x Qwiic Cable - Breadboard Jumper (4-pin) 1 x Qwiic Cable - Female Jumper (4-pin)

    Out of stock

    € 7,95

    Members € 7,16

  • SparkFun Qwiic Adapter

    SparkFun SparkFun Qwiic Adapter

    The SparkFun Qwiic Adapter provides the perfect means to make any old I²C board into a Qwiic-enabled board. This adapter breaks out the I²C pins from the Qwiic connectors to pins that you can easily solder with your favorite I²C-enabled device. The Qwiic Adapter has two Qwiic connection ports, all on the same I²C bus. Four plated through holes are broken out for SCL, SDA, 3.3V and GND. These pins can be used to convert an old I²C-enabled device into a Qwiic-enabled board. Features 2x Qwiic Connection Ports Broken-out I²C Pins

    € 1,95

    Members € 1,76

  • Hook-Up Wire – Assortment (Solid Core, 22 AWG)

    SparkFun Hook-Up Wire - Assortment (Solid Core, 22 AWG)

    An assortment of coloured wires: you know it's a beautiful thing. Six different colours of stranded wire in a cardboard dispenser box. Sit this on your workbench, and stop worrying about having a piece of wire around! Included 22 AWG 25 ft / Spool 6 Spools in Six Different Colors Colours are Red, Blue, Yellow, Green, Black, and White Dispenser Box

    € 31,95

    Members € 28,76

  • Qwiic Cable (100 mm)

    SparkFun Qwiic Cable (100 mm)

    This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components but can be used for other applications as well. Each Qwiic Cable's wires have been colour-coded to Red, Black, Blue, and Yellow.

    € 1,95

    Members € 1,76

  • Reversible USB A to C Cable (0.8 m)

    SparkFun Reversible USB A to C Cable (0.8 m)

    Out of stock

    Supporting USB 2.0 speeds and charging up to 2A, this 0.8-meter cable is perfect for embedded enthusiast that need the flexibility of a thinner cable and the wonderful feel of a reversible USB-C & USB-A connection. The 0.8m/~2ft length is perfect in small applications. This cable has the D+/D- wires alongside large-gauge VBUS/GND wires. Rated for 2A, we've successfully pulled 2A@5V with minimal voltage drop. Features Reversible USB-A connector Reversible USB-C connector 0.8 m cable length

    Out of stock

    € 4,95

    Members € 4,46

  • SparkFun MicroMod DIY Carrier Kit (5 pack)

    SparkFun SparkFun MicroMod DIY Carrier Kit (5 pack)

    The MicroMod DIY Carrier Kit includes five M.2 connectors (4.2mm height), screws, and standoffs so that you can get all the special parts you may need to make your own carrier board. MicroMod uses the standard M.2 connector. This is the same connector found on modern motherboards and laptops. There are various locations for the plastic ‘key’ on the M.2 connector to prevent a user from inserting an incompatible device. The MicroMod standard uses the ‘E’ key and further modifies the M.2 standard by moving the mounting screw 4mm to the side. The ‘E’ key is fairly common so a user could insert an M.2 compatible Wifi module. Still, because the screw mount doesn’t align, the user would not secure an incompatible device into a MicroMod carrier board. Features 5x Machine Screws Phillips Head #0 (but #00 to #1 works) Thread: M2.5 Length: 3 mm 5x SMD Reflow Compatible Standoffs Thread: M2.5 x 0.4 Height: 2.5 mm 5x M.2 MicroMod Connectors Key: E Height: 4.2 mm Pin count: 67 Pitch: 0.5 mm

    € 6,95

    Members € 6,26


Forgot password?

Don't have an account yet?
Create an account