Description
Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS (with WiFi bridge). Connect the SmartScope to pretty much any device!
Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes.
With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second.
The Software for the support of Windows / macOS) / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given.
Features
- Channel sampled at 100 MHz/s each
- AC/DC coupling on analog inputs
- 100% silent
- 64 Mbit RAM: x10000 zoom
- Arbitrary Waveform Generator
- 8 digital inputs at 100 MS/s each
- 4 digital outputs at 100 MS/s each
- Externally power your scope in case your mobile can't supply the juice.
Specifications
Oscilloscope |
Bandwidth |
30 MHz (-3 dB point) |
Sample rate |
2x 100 MS/s |
Channels |
2 |
Max pre-trigger position |
16x full scale |
Max post-trigger position |
Full scale |
Max full voltage scale |
10 V/div (±35 V input range) |
Min full voltage scale |
20 mV/div |
Analog input range |
-35 V, +35 V |
Max input peak-to-peak |
40 V |
Signal coupling |
AC / DC |
Precision |
8 bit |
Input impedance |
1 MΩ // 10 pF |
Waverforms |
200 waveforms/s |
Data delay to host |
< 10 ms |
Sample depth |
Up to 4 million samples per channel |
External trigger |
Yes |
Logic Analyzer |
Input channels |
8 |
Input impedance |
100 kOhm // 2 pF to GND |
Sample rate |
100 MS/s |
Logic level |
1.8 V to 5.0 V |
Diode protection |
Bidirectional |
Input data buffer |
4 million samples |
Waverforms |
200 waveforms/s |
Data delay to host |
< 10 ms |
Protocol decoders |
I²C, SPI, UART, I²S integrated User extensible |
Wave Generator (Analog Output) |
Output channels |
1 |
Data rate |
Up to 50 MS/s |
Output level |
0-3.3 V (Opamp driven) |
Output buffer |
Up to 2048 samples |
Max slew rate |
30 ns/V |
Step |
13 mV |
Wave Generator (Digital Output) |
Channels |
4 |
Data rate |
Up to 100 MS/s |
Output level |
3.3 V or 5 V (selectable) |
Output buffer |
Up to 2048 samples |
Diode protected |
Yes |
Programmable Logic |
USB controller |
MicroChip PIC18F14K50 |
USB interface |
PicKit3 or USB flashable |
FPGA |
Xilinx Spartan 6 |
FPGA interface |
JTAG and USB flashable |
Size & Weight |
Dimensions (L x W x D) |
4.33 x 2.52 x 0.95' (110 x 64 x 24.2 mm) |
Weight |
158 g |
Case |
Aluminium |
Connectivity |
Device/Host |
mini USB included |
Record waveforms |
Store Matlab (.mat) or Excel (.csv) files through Dropbox |
Analog |
BNC 2 probes included |
Digital |
8x 0.1' pitch, probes (included) |
Sync |
USB micro B-B |
Power |
USB micro B (optional) |
Included
- 1x SmartScope USB Oscilloscope
- 2x Analog probes
- 1x Digital probe cable
- 1x Mini-B USB cable
Downloads