Components

258 products


  • Raspberry Pi Pico RP2040

    Raspberry Pi Foundation Raspberry Pi Pico RP2040

    2 reviews

    Specifications RP2040 microcontroller chip designed by Raspberry Pi in the UK Dual-core ARM Cortex M0+ processor, with a flexible clock running up to 133 MHz 264 kB SRAM, and 2 MB on-board Flash memory Castellated module allows soldering directly to carrier boards USB 1.1 host and device support Energy-efficient sleep and dormant modes Drag and drop programming using mass storage via USB 26x multifunction GPIO pins 2x SPI, 2x I²C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels On-chip accurate clock and timer Temperature sensor On-chip accelerated floating point libraries 8x programmable IO (PIO) state machines for custom peripherals Why a Raspberry Pi Pico? Designing your own microcontroller instead of buying an existing one brings a number of advantages. According to Raspberry Pi itself, not one of the existing products available for this comes close to their price/performance ratio. This Raspberry Pi Pico has also given Raspberry Pi the ability to add some innovative and powerful features of their own. These features are not available anywhere else. A third reason is that the Raspberry Pi Pico has given Raspberry Pi the ability to create powerful software around the product. Surrounding this software stack is an extensive documentation set. The software and documentation meet the high standard of Raspberry Pi's core products (such as the Raspberry Pi 400, Pi 4 Model B and Pi 3 Model A+). Who is this microcontroller for? The Raspberry Pi Pico is suitable for both advanced and novice users. From controlling a display to controlling many different devices that you use every day. Automating everyday operations is made possible by this technology. Beginner users The Raspberry Pi Pico is programmable in the C and MicroPython languages and is customizable for a wide range of devices. In addition, the Pico is as easy to use as dragging and dropping files. This makes this microcontroller ideally suited for the novice user. Advanced users For advanced users, it is possible to take advantage of the Pico's extensive peripherals. The peripherals include the SPI, I²C, and eight programmable I/O (PIO)-state machines. What makes the Raspberry Pi Pico unique? What's unique about the Pico is that it was developed by Raspberry Pi itself. The RP2040 features a dual-core Arm Cortex-M0+ processor with 264 KB of internal RAM and support for up to 16 MB of off-chip Flash. The Raspberry Pi Pico is unique for several reasons: The product has the highest price/quality ratio in the microcontroller board market. The Raspberry Pi Pico has been developed by Raspberry Pi itself. The software stack surrounding this product is of high quality and comes paired with a comprehensive documentation set.

    $6.00

    Members identical

  • ESP32-C3-DevKitM-1

    Espressif ESP32-C3-DevKitM-1

    Out of stock

    ESP32-C3-DevKitM-1 is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth LE functions. Most of the I/O pins on the ESP32-C3-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitM-1 on a breadboard. Specifications ESP32-C3-MINI-1 ESP32-C3-MINI-1 is a general-purpose Wi-Fi and Bluetooth LE combo module that comes with a PCB antenna. At the core of this module is ESP32-C3FN4, a chip that has an embedded flash of 4 MB. Since flash is packaged in the ESP32-C3FN4 chip, rather than integrated into the module, ESP32-C3-MINI-1 has a smaller package size. 5 V to 3.3 V LDO Power regulator that converts a 5 V supply into a 3.3 V output. 5 V Power On LED Turns on when the USB power is connected to the board. Pin Headers All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board. For details, please see Header Block. Boot Button Download button. Holding down Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port. Micro-USB Port USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-C3FN4 chip. Reset Button Press this button to restart the system. USB-to-UART Bridge Single USB-UART bridge chip provides transfer rates up to 3 Mbps. RGB LED Addressable RGB LED, driven by GPIO 8. Downloads ESP32-C3 Datasheet ESP32-C3-MINI-1 Datasheet ESP32-C3-DevKitM-1 Schematic ESP32-C3-DevKitM-1 PCB Layout ESP32-C3-DevKitM-1 Dimensions

    Out of stock

    $23.00

    Members $20.70

  • CAN-module MCP2515

    Makerfabs CAN Module MCP2515

    This CAN Module is based on the CAN bus controller MCP2515 and CAN transceiver TJA1050. With this module, you will easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino Uno and so on. Features Support CAN V2.0B Communication rate up to 1 MB/s Working Voltage: 5 V Working Current: 5 mA Interface: SPI Downloads MCP2515 Datasheet TJA1050 Datasheet

    $12.00

    Members $10.80

  • Nordic Semiconductor nRF52840 USB Dongle

    Nordic Semiconductor nRF52840 USB Dongle

    The nRF52840 Dongle is a small, low-cost USB dongle that supports Bluetooth 5.3, Bluetooth mesh, Thread, ZigBee, 802.15.4, ANT and 2.4 GHz proprietary protocols. The Dongle is the perfect target hardware for use with nRF Connect for Desktop as it is low-cost but still support all the short range wireless standards used with Nordic devices. The dongle has been designed to be used as a wireless HW device together with nRF Connect for Desktop. For other use cases please do note that there is no debug support on the Dongle, only support for programming the device and communicating through USB. It is supported by most of the nRF Connect for Desktop apps and will automatically be programmed if needed. In addition custom applications can be compiled and downloaded to the Dongle. It has a user programmable RGB LED, a green LED, a user programmable button as well as 15 GPIO accessible from castellated solder points along the edge. Example applications are available in the nRF5 SDK under the board name PCA10059. The nRF52840 Dongle is supported by nRF Connect for Desktop as well as programming through nRFUtil. Features Bluetooth 5.2 ready multiprotocol radio 2 Mbps Long Range Advertising Extensions Channel Selection Algorithm #2 (CSA #2) IEEE 802.15.4 radio support Thread ZigBee Arm Cortex-M4 with floating point support DSP instruction set ARM CryptoCell CC310 cryptographic accelerator 15 GPIO available via edge castellation USB interface direct to nRF52840 SoC Integrated 2.4 GHz PCB antenna 1 user-programmable button 1 user-programmable RGB LED 1 user-programmable LED 1.7-5.5 V operation from USB or external Downloads Datasheet Hardware Files

    $23.00

    Members $20.70

  •  -33% MightyOhm Geigerteller kit (incl. behuizing)

    MightyOhm MightyOhm Geiger Counter Kit (incl. Case)

    Have you ever wondered if the objects in your house are radioactive or not? Does the apple in your fridge give off radiation? Are the books on your shelves giving off gamma rays? You can easily find that out by building your Geiger counter! Thanks to the serial logging function you can track exposure over time, and you can use the mute button to detect radiation without any noise. Detect beta and gamma radiation with your own portable Geiger counter! Features 100% Open Source Hardware! Sensitive to beta and gamma radiation LED and piezo speaker alert you to detected radioactivity. Mute button for silent operation. An ATtiny2313 microcontroller brain that is begging to be hacked! Support for several common Geiger-Müller tubes: SI-3BG, SI-1G, and SBM-20. HV supply can be adjusted from ~300-600 V. Headers for serial (9600 baud), in-circuit programming of the AVR microcontroller, and pulse output (to connect the Geiger counter to other stuff!) Serial data logging! Counts per second (CPS), counts per minute (CPM), and equivalent dose are reported via the serial port once a second. Included Geiger counter kit incl. PCB and all parts 1x SBM-20 Geiger-Müller tube 1x Laser cut acrylic case Downloads Assembly Instructions Case Assembly Instructions Design Files Source Code Usage Instructions

    $150.00$100.00

    Members identical

  •  -39% Elektor 37-in-1 Sensor Kit

    Elektor Labs Elektor 37-in-1 Sensor Kit

    Out of stock

    Kit Contents 1x Joystick 1x Relay 1x Big Sound 1x Small Sound 1x Tracking 1x Avoidance 1x Flame 1x Linear Hall Sensor 1x Touch 1x Digital Temperature 1x Buzzer 1x Passive Buzzer 1x RGB LED 1x SMD RGB 1x Two Color (5 mm) 1x Mini Two Color (3 mm) 1x Reed Switch 1x Mini Reed Switch 1x Heartbeat 1x 7 Color Flash 1x Laser Emitter 1x PCB mounted push button 1x Shock, a rolling-ball type Tilt Switch 1x Rotary Encoders 1x Rolling ball Tilt Switch 1x Photoresistor 1x Temp and Humidity 1x Analog Hall 1x Hall Magnetic 1x DS18B20 Temp 1x Analog Temp 1x IR Emission 1x IR Receiver 1x Tap Module 1x Light Blocking Please note: For security reasons the Mercury Tilt Switch and Light Cup are no longer available in current sensor boxes. Downloads Manual

    Out of stock

    $56.00$34.00

    Members identical

  •  -18% DIY LiPo Supercharger Kit V2 (by GreatScott!)

    Elektor Labs DIY LiPo Supercharger Kit V2 (by GreatScott!)

    This DIY LiPo Supercharger/Booster (developed the electronics engineer/YouTuber GreatScott! and produced by Elektor) can charge a single-cell LiPo battery and protect it against the effects of overvoltage, overload, and short-circuits. Additionally, it can boost the battery voltage to 5 V or 12 V. The boosted output voltage is protected by an ‘eFuse’ IC outputting 1.52 A at 5 V or 0.76 A at 12 V maximum.The charger part of the circuit needs a +5 V power supply which can be connected through USB-C, or simply two wires soldered to pads on the PCB.In addition, other connections can be soldered to pads on the PCB or by using single pinheaders.Included 1x Mainboard pre-assembled with the 4 ICs 15x Resistors 3x LEDs 13x Capacitors 2x Switches 1x USB-C on a breakout board 2x Diodes Please note: Battery is not included.The board uses a DC/DC Converter, an IC charger, and an e Fuse from Texas Instruments. The battery protection IC is from Xysemi and provides under-voltage lockout, over current protection, and reverse battery protection.The board is connected to the power and recharges the batteries via a USB-C connection.Specifications Battery Single-cell lithium-ion or lithium-polymer battery Input Voltage +5 V / 2 A max. Output Voltage 5 V / 1.52 A12 V / 0.76 A LiPo Protection XB8089D Overcharge Detection 4.250 V Overcharge Release 4.10 V Overdischarge Detection 2.50 V Overdischarge Release 3 V Overcurrent Detection 10.0 A Thermal Shutdown Auto-retry Enable/Undervoltage Lockout Rising: 1.2 V (typ.)Falling: 1.1 V (typ.)

    $34.00$28.00

    Members identical

  • PiKVM met stalen behuizing

    PiKVM PiKVM Steel Case

    Features Steel enclosure: High quality steel with cool ​​sand-texture finishing Tiny LCD screen: It can display the IP address, host name, uptime, and can also be used to display other information. PiKVM OS includes a set of libraries that allows you to display almost anything using Python. Fan for active cooling: It will protect your device from overheating. PiKVM is able to control the fan speed using PWM, so it will not run at maximum speed all the time. Plastic housing for the LCD screen: This tiny piece of plastic is responsible for the robust support of the LCD screen inside the case. Injection molding eas used for making that display holder. Assembly hardware: A set of screws and nuts to assemble the case and install the fan.

    $56.00

    Members $50.40

  •  -18% Arduino Uno Experimenteerbundel

    Elektor Bundles Arduino Uno Experimenting Bundle

    Out of stock

    The project book, written by well-known Elektor author Dogan Ibrahim, holds many software- and hardware-based projects especially developed for the Arduino Uno Experimenting Kit. The kit comes with an Arduino Uno board, several LEDs, sensors, actuators, and other components. The purpose of the kit is to make a flying start with hardware and software aspects of projects designed around the Arduino Uno microcontroller system. The projects given in this guide are fully evaluated and working and fully employ all the supplied components. A block diagram, a circuit diagram, an extensive program listing, and a complete program description is given for every project in the guide. Included in the kit 1x Arduino Uno Rev3 board 1x RFID reader module 1x DS1302 clock module 1x 5 V stepper motor 1x "2003" stepper motor drive board 5x Green LED 5x Yellow LED 5x Red LED 2x Rocker switch 1x Flame sensor 1x LM35 sensor module 1x Infrared receiver 3x Light-dependent resistors (LDRs) 1x IR remote controller 1x Breadboard 4x Pushbutton (with four caps) 1x Buzzer 1x Piezo sounder 1x Adjustable resistor (potentiometer) 1x 74HC595 shift register 1x 7-segment display 1x 4-digit 7-segment display 1x 8x8 Dot-matrix display 1x 1602 / I²C LCD module 1x DHT11 Temperature and humidity module 1x Relay module 1x Sound module Set of Dupont cables Set of Breadboard cables 1x Water sensor 1x PS2 Joystick 5x 1 k-ohm resistor 5x 10 k-ohm resistor 5x 220-ohm resistor 1x 4x4 keypad module 1x 9g Servo (25 cm) 1x RFID card 1x RGB module 1x 9 V battery DC jack Project book (237 pages) Over 60 Projects in the Book Hardware Projects with LEDs Blinking LED – using the onboard LED Blinking LED – using an external LED LED flashing SOS Alternately-blinking LEDs Chasing LEDs Chasing LEDs 2 Binary counting LEDs Random flashing LEDs – Christmas lights Button controlled LED Controlling the LED flashing rate – external interrupts Reaction timer LED color wand RGB fixed colors Traffic lights Traffic lights with pedestrian crossings Using the 74HC595 shift register – binary up counter Using the 74HC595 shift register – randomly flashing 8 LEDs Using the 74HC595 shift register – chasing LEDs Using the 74HC595 shift register – turn ON a specified LED Using the 74HC595 shift register – turn ON specified LEDs 7-Segment LED Displays 7-Segment 1-digit LED counter 7-Segment 4-digit multiplexed LED display 7-Segment 4-digit multiplexed LED display counter – timer interrupts 7-Segment 4-digit multiplexed LED display counter – eliminating the leading zeroes 7-Segment 4-digit multiplexed LED display – reaction timer Timer interrupt blinking onboard LED Liquid Crystal Displays (LCDs) Display text on the LCD Scrolling text on the LCD Display custom characters on the LCD LCD based conveyor belt goods counter LCD-based accurate clock using timer interrupts LCD dice Sensors Analog temperature sensor Voltmeter On/Off temperature controller Darkness reminder using a light-dependent resistor (LDR) Tilt detection Water-level sensor Displaying water levels Water level controller Flooding detector with buzzer Sound detection sensor – relay control by hand clapping Flame sensor – fire detection with relay output Temperature and humidity display Generating musical tones with the melody maker The RFID Reader Finding the Tag ID RFID door lock access control with relay The 4x4 Keypad Display the pressed key code on the Serial Monitor Integer calculator with LCD Keypad door security lock with relay The Real-Time Clock (RTC) Module RTC with Serial Monitor RTC with LCD Temperature and humidity display with time stamping The Joystick Reading joystick analog values 8x8 LED Matrix Displaying shapes Motors Test-rotate the servo Servo sweep Joystick-controlled servo Rotate the motor clockwise and then anticlockwise Infrared Receiver and Remote Controller Unit Decoding the IR remote control codes Remote relay activation/deactivation Infrared remote stepper motor control

    Out of stock

    $95.00$78.00

    Members identical

  • Makerfabs Jumper Wires Combo Pack

    Makerfabs Makerfabs Jumper Wires Combo Pack

    With these jumper wires (length: 20 cm) you can connect a Raspberry Pi or an Arduino with breadboards. Each cable consists of 40 individual wires/pins which can also be separated. Included 1x 40-pins female to female 1x 40-pins male to male 1x 40-pins male to female

    $8.00

    Members $7.20

  •  -26% Electronics Fans Package – Component Basic Starter Kit

    Kuongshun Electronics Fans Package - Component Basic Starter Kit

    Contents 1x High Quality Retail Box 10x  1/4W 1% 100R Resistor 10x  1/4W 1% 220R Resistor 10x  1/4W 1% 330R Resistor 10x  1/4W 1% 1K Resistor 10x  1/4W 1% 10K Resistor 10x  1/4W 1% 100K Resistor 10x  1/4W 1% 4.7K Resistor 10x  1/4W 1% 47K Resistor 10x  100PF Ceramic Capacitor 10x  10NF Ceramic Capacitor 10x  100NF Ceramic Capacitor 10x  22PF Ceramic Capacitor 10x  10UF aluminum electrolytic capacitor 10x  470UF aluminum electrolytic capacitor 10x Red LED 10x Green LED 10x Yellow LED 10x Blue LED 8x  12x12x7.3 Switch 2x Red Cap 2x Yellow Cap 2x Green Cap 2x Blue Cap 1x 10K Precision Potentiometer 2x RGB LED 1x Active Buzzer 1x Passive Buzzer 1x Pin Header 1x40 1x Resistor Card 1x 400pts Breadboard 1x 30pcs/pack Breadboard Jumper Wires Set

    $23.00$17.00

    Members identical

  • JOY-iT Uno R3 DIP

    JOY-iT JOY-iT Uno R3 DIP

    The Uno R3 board is the perfect microcontroller for those who want to enter the programming world without any fuss. Its ATMega328 microcontroller provides you with enough power for your ideas and projects. The Uno board has a USB type B connector so that you can easily use it with programs – of course via the well-known programming environment Arduino IDE. You can connect it to the power source via the USB port or alternatively use its own power connection. Please note: The CH341 driver must be installed beforehand so that Uno board is recognized by the Arduino IDE. Microcontroller ATmega 328 Clock speed 16 MHz Operating voltage 5 V Input voltage 5-10 V Digital I/O Pins 14 with PWM 6 USB 1x SPI 1x I²C 1x ICSP 1x Flash Memory 32 KB EEPROM 1x

    $17.00

    Members $15.30

  • WIZnet W5100S-EVB-Pico RP2040-based Evaluation Board

    WIZnet WIZnet W5100S-EVB-Pico

    Features RP2040 microcontroller with 2 MB Flash Dual-core cortex M0+ at up to 133 MHz 264 KB multi-bank high performance SRAM External Quad-SPI Flash with eXecute In Place (XIP) High performance full-crossbar bus fabric 30 multi-function General Purpose IO (4 can be used for ADC) 1.8-3.3 V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3 V) 12-bit 500 ksps Analogue to Digital Converter (ADC) Various digital peripherals 2× UART, 2× I²C, 2× SPI, 16× PWM channels 1× Timer with 4 alarms, 1× Real Time Counter 2× Programmable IO (PIO) blocks, 8 state machines total Flexible, user-programmable high-speed IO Can emulate interfaces such as SD Card and VGA Includes W5100S Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE Supports 4 Independent Hardware SOCKETs simultaneously Internal 16 KB Memory for TX/ RX Buffers SPI Interface Micro-USB B port for power and data (and for reprogramming the Flash) 40 pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins also with edge castellations 3-pin ARM Serial Wire Debug (SWD) port 10 / 100 Ethernet PHY embedded Supports Auto Negotiation Full / Half Duplex 10 / 100 Based Built-in RJ45 (RB1-125BAG1A) Built-in LDO (LM8805SF5-33V) Downloads RP2040 Datasheet W5100S Datasheet Schematic & Part list & Gerber File C/C++ Examples CircuitPython Examples

    $17.00

    Members $15.30

  • JOY-iT Mega 2560 R3

    JOY-iT JOY-iT Mega 2560 R3

    If you want to enter the programming world quickly and easily, JOY-iT Mega 2560 R3 is the board for you. Due to the abundance of tutorials and instructions for this microcontroller online, you will start programming without any complications. Based on an ATmega2560, which offers sufficient power for your projects and ideas, JOY-iT Mega 2560 R3 has many connection options with 54 digital inputs and outputs and 16 analog inputs. To start programming your JOY-iT Mega 2560 R3, you need to install the development environment, and, of course, the drivers, on your computer. The Arduino IDE is best for using with the Mega 2560. This IDE is completely compatible with this board and offers you every driver you need for a quick start. Microcontroller ATmega2560 Clock speed 16 MHz Operating voltage 5 V/DC Digital I/O Pins 54 (of which 15 with PWM) Analog Input Pins 16 Analog Output Pins 15 Flash Memory 256 KB EEPROM 4 KB SRAM 8 KB Download JOY-iT Mega 2560 R3 Starter Kit here.

    $28.00

    Members $25.20

  • Arduino Uno Rev3

    Arduino Arduino Uno Rev3

    Arduino Uno is an open-source microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. You can tinker with your Uno without worring too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again. "Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards. Specifications Microcontroller ATmega328P Operating Voltage 5 V Input Voltage (recommended) 7-12 V Input Voltage (limit) 6-20 V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3 V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz LED_BUILTIN 13 Dimensions 68.6 x 53.4 mm Weight 25 g

    $28.00

    Members identical

  • ESP32-Cam-CH340 Development Board

    Espressif ESP32-Cam-CH340 Development Board

    Features Product model: HW-818 Working voltage: DC 5V Product size: 27mm x 48.5 mm x 4.5 mm / 1.06” x 1.9” x 0.17” SPI Flash: Default 32Mbit RAM: Internal 520KB + External 4MPSRAM Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards Wi-Fi: 802 II b/g/n/e/i Support interfaces: UART, SPI, I2C, PWM Supporting TF Card: Maximum Supporting 4G IO port: 9 Serial port rate: default 115200 BPS Image output format: JPEG (OV2640 only), BMP, GRAYSCALE Spectrum range: 2412-2484 MHz Antenna form: board PCB antenna, gain 2dBi Transmitting power: 802.l1b: 17 + 2dBm (1lMbps) 802.l1g:14+2dBm (54Mbps) 802.l1n:13+2dBm (MCS7)

    $14.00

    Members $12.60

  • JOY-iT NodeMCU ESP32 Development Board

    JOY-iT JOY-iT NodeMCU ESP32 Development Board

    With the NodeMCU-ESP32, comfortable prototyping is possible with simple programming via Luascript or the Arduino IDE and the breadboard-compatible design. This board has 2.4 GHz dual-mode Wifi and a BT wireless connection. In addition, a 512 KB SRAM and a 4 MB memory are integrated on the microcontroller development board. The board has 21 pins for interface connection, including I²C, SPI, UART, DAC and ADC. Specifications Type ESP32 Processor Tensilica LX6 Dual-Core Clock Frequency 240 MHz SRAM 512 kB Memory 4 MB Wireless Lan 802.11 b/g/n Frequency 2.4 GHz Bluetooth Classic / LE Data Interfaces UART / I²C / SPI / DAC / ADC Operating Voltage 3.3 V (operable via 5 V microUSB) Operating Temperature –40°C – 125°C Dimensions 48 x 26 x 11.5 mm Weight 10 g Downloads Manual

    $15.00

    Members $13.50

  • ESP32-DevKitC-32D

    Espressif ESP32-DevKitC-32D

    Out of stock

    ESP32-DevKitC V4 is a small-sized ESP32-based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can connect these pins to peripherals as needed. Standard headers also make development easy and convenient when using a breadboard. The board supports various ESP32 modules, including ESP32-WROOM-32, ESP32-WROOM-32U, ESP32-WROOM-32D, ESP32-SOLO-1, and ESP32-WROVER series. The following list and figure below describe key components, interfaces and controls of ESP32-DevKitC V4 board ESP32-WROOM-32 module soldered to the ESP32-DevKitC V4 board. Optional Space for ESP32-WROVER: Longer ESP32-WROVER modules may be soldered instead of the ESP32-WROOM-32. A single chip USB-to-UART bridge provides up to 3 Mbps transfers rates. Download button: holding down the Boot button and pressing the EN button initiates the firmware download mode. Then the user can download firmware through the serial port. EN Button: Reset button - pressing this button resets the system Micro USB Port: USB interface. It functions as the power supply for the board and the communication interface between PC and the ESP module. 5 V Power On LED: This LED lights when the USB or an external 5 V power supply is applied to the board. I/O Connector: Most of the pins on the ESP module are broken out to the pin headers on the board. Users can program ESP32 to enable multiple functions such as PWM, ADC, DAC, I2C, I2S, SPI, etc ESP32-DevKitC V4 schematic (PDF)

    Out of stock

    $19.00

    Members $17.10

  • OPEN-SMART GPS – Serial GPS Module for Arduino (APM2.5 Flight Control)

    Kuongshun OPEN-SMART GPS - Serial GPS Module for Arduino (APM2.5 Flight Control)

    The GT-7U GPS module, with its high sensitivity, low power consumption, miniaturization, and its extremely high tracking sensitivity, delivers an extended area of coverage. In an area that the conventional GPS receiver would fail, such as narrow urban sky, dense Jungle environment, GT-7U can achieve high-precision positioning. Its compact size makes it suitable for applications in vehicles, mobile phones, video cameras, and other mobile positioning systems, and it is an excellent choice for GPS applications. Specifications Operating Frequency L1 (1575.42 ±10 MHz) Operating Voltage 3.3 - 5.2 V Operating Current Normal Mode: 50 mA Power-Saving Mode: 30 mA Communication Interface TTL serial port, microUSB interface Serial Port Baud Rate 9600 bps Communication format 8N1 Interface Logic Voltage 3.3 or 5 V External Antenna Inteface IPX Dimensions 2.2 x 2.1 x 0.5 cm Weight 8.5 g

    $13.00

    Members $11.70

  • LILYGO T-Display-S3 ESP32-S3 Development Board (with Headers)

    LILYGO LILYGO T-Display-S3 ESP32-S3 Development Board (with Headers)

    Out of stock

    LILYGO T-Display-S3 ESP32-S3 1.9-inch ST7789 LCD Display Development Board WiFi Bluetooth 5.0 Wireless Module 170x320 Resolution T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication or programming. Specifications MCU ESP32-S3R8 Dual-core LX7 microprocessor Wireless Connectivity Wi-Fi 802.11, BLE 5 + BT Mesh Programming Platform Arduino IDE Micropython Flash 16 MB PSRAM 8 MB Bat voltage detection IO04 Onboard functions Boot + Reset + IO14 Button LCD 1.9" diagonal, Full-color TFT Display Drive Chip ST7789V Resolution 170(H)RGB x320(V) 8-Bit Parallel Interface Working power supply 3.3 V Support STEMMA QT / Qwiic  Connector JST-GH 1.25 mm 2-pin Downloads Pinout GitHub

    Out of stock

    $34.00

    Members $30.60

  • Makerfabs RC522 RFID Reader met Cards Kit (13.56 MHz)

    Makerfabs Makerfabs RC522 RFID Reader with Cards Kit (13.56 MHz)

    Out of stock

    This RC522 RFID Kit includes a 13.56 MHz RF reader module that uses an RC522 IC and two S50 RFID cards to help you learn and add the 13.56 MHz RF transition to your project. The MF RC522 is a highly integrated transmission module for contactless communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode. The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino. Features Operating Current: 13-26 mA/DC 3.3 V Idle Current: 10-13 mA/DC 3.3 V Sleep Current: Peak Current: Operating Frequency: 13.56 MHz Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, Mifare Pro, MIFARE DESFire Environmental Operating Temperature: -20-80 degrees Celsius Environmental Storage Temperature: -40-85 degrees Celsius Relative humidity: relative humidity 5% -95% Reader Distance: ≥50 mm/1.95" (Mifare 1) Module Size: 40×60 mm/1.57*2.34" Module interfaces SPI Parameter Data transfer rate: maximum 10 Mbit/s Included 1x RFID-RC522 Module 1x Standard S50 Blank Card 1x S50 special-shaped card (as shown by the keyring shape) 1x Straight Pin 1x Curved Pin Downloads Arduino Library MFRC522 Datasheet MFRC522_ANT Mifare S50

    Out of stock

    $7.00

    Members $6.30

  •  -28% Elektor US-Style Sirene Kit

    Elektor Labs Elektor US-Style Siren Kit

    A great way to explain the workings of an electronic circuit is to position the discrete parts on the board exactly as in the schematic. Press the button and this "Elektor Classic" responds with 1 of 3 siren sounds: police, ambulance, or fire brigade. The kit is composed of through-hole parts only and includes a wooden desktop stand. A full explanation of the circuit operation appears on the back of the circuit board. Features Realistic Sound from Onboard Speaker Unique PCB Layout Equals Schematic Elektor Heritage Circuit Symbols Tried & Tested by Elektor Labs Educational & Geeky Project Through-Hole Parts Only Included Printed Circuit Board All Components Wooden Desktop Stand

    $39.00$28.00

    Members identical

  • BBC micro:bit v2

    BBC micro:bit v2

    Differences between micro:bit v1 and micro:bit v2 The BBC micro:bit v2 is equipped with BLE Bluetooth 5.0 It has a Power off button(push and hold power button) MEMS microphone with a LED indicator Onboard speaker Touch-sensitive logo pin LED power indicator A notched edge connector for easier connections.

    $28.00

    Members $25.20

  • 2.2` SPI TFT Display Module ILI9341 (240x320)

    Kuongshun 2.2" SPI TFT Display Module ILI9341 (240x320)

    ILI9341 is a 262144-color single-chip SOC driver for a TFT liquid crystal display with resolution of 240x320 dots (RGB), comprising a 720-channel source driver, a 320-channel gate driver, 172800 bytes GRAM for graphic display data of 240x320 dots (RGB), and power supply circuit.ILI9341 supports parallel 8-/9-/16-/18-bit data bus MCU interface, 6-/16-/18-bit data bus RGB interface and 3-/4-line serial peripheral interface (SPI).The moving picture area can be specified in internal GRAM by window address function. The specified window area can be updated selectively, so that moving picture can be displayed simultaneously independent of still picture area.ILI9341 can operate with 1.65V ~ 3.3V I/O interface voltage and an incorporated voltage follower circuit to generate voltage levels for driving an LCD.ILI9341 supports full color, 8-color display mode and sleep mode for precise power control by software and these features make the ILI9341 an ideal LCD driver for medium or small size portable products such as digital cellular phones, smart phone, MP3 and PMP where long battery life is a major concern.Features Display resolution: 240 x 320 (RGB) Output: 720 source outputs | 320 gate outputs | Common electrode output (VCOM) a-TFT LCD driver with on-chip full display RAM: 172,800 bytes System Interface 8-bits, 9-bits, 16-bits, 18-bits interface with 8080-Ⅰ/8080- Ⅱ series MCU 6-bits, 16-bits, 18-bits RGB interface with graphic controller 3-line / 4-line serial interface Display mode: Full color mode (Idle mode OFF): 262K-color Reduced color mode (Idle mode ON): 8-color Power saving modes: Sleep mode Deep standby mode On chip functions: VCOM generator and adjustment Timing generator Oscillator DC/DC converter Line/frame inversion 1 preset Gamma curve with separate RGB Gamma correction Content Adaptive Brightness Control MTP (3 times): 8-bits for ID1, ID2, ID3 7-bits for VCOM adjustment Low-power consumption architecture Low operating power supplies: VDDI = 1.65V ~ 3.3V (logic) VCI = 2.5V ~ 3.3V (analog) LCD Voltage drive: Source/VCOM power supply voltage AVDD - GND = 4.5V ~ 5.5V VCL - GND = -2.0V ~ -3.0V Gate driver output voltage VGH - GND = 10.0V ~ 20.0V VGL - GND = -5.0V ~ -15.0V VGH - VGL 3 ≦ 2V VCOM driver output voltage VCOMH = 3.0V ~ (AVDD – 0.5)V VCOML = (VCL+0.5)V ~ 0V VCOMH - VCOML ≦ 6.0V Operate temperature range: -40℃ to 85℃

    $26.00

    Members $23.40

Here you will find all kinds of parts, components and accessories that you need in different projects, starting with simple wires, sensors and displays to already pre-assembled modules and kits.

Login

Forgot password?

Don't have an account yet?
Create an account