Sensors & LiDAR
HuskyLens AI Camera
Do you need a simple AI camera to enhance your projects? The HuskyLens AI Camera intuitive design allows the user to control different aspects of the camera just by pressing buttons. You can start and stop learning new objects and even switch between algorithms from the device. To further reduce the need to be connected to a PC the HuskyLens AI Camera comes with a 2-inch display so you can see what's going on in real time. Specifications Processor: Kendryte K210 Image Sensor: OV2640 (2.0 Megapixel Camera) Supply Voltage: 3.3~5.0 V Current Consumption (TYP): 320 mA @ 3.3 V, 230 mA @ 5.0 V (face recognition mode; 80% backlight brightness; fill light off) Connection Interface: UART, I²C Display: 2.0-inch IPS screen with 320x240 resolution Built-in Algorithms: Face Recognition, Object Tracking, Object Recognition, Line Tracking, Color Recognition, Tag Recognition Dimension: 52 x 44.5 mm (2.05 x 1.75') Included 1x HuskyLens Mainboard 6x M3 Screws 6x M3 Nuts 1x Small Mounting Bracket 1x Heightening Bracket 1x Gravity 4-Pin Sensor Cable
€ 89,95
Members € 80,96
Garmin LIDAR-Lite v3
This easy-to-use 40-meter laser-based optical ranging sensor has all the core features that made the LIDAR-Lite v2 popular. Small in form and light in weight with a low power consumption of less than 130 mA during an acquisition. And it’s user-configurable, so you can adjust between accuracy, operating range and measurement time. Each LIDAR-Lite v3 features an edge-emitting, 905 nm (1.3 watts), single-stripe laser transmitter, 4 m Radian x 2 m Radian beam divergence, and an optical aperture of 12.5 mm. The third version of the LIDAR-Lite still operates at 5 V DC with a current consumption rate of <100 mA at continuous operation. On top of everything else, the LIDAR-Lite is user-configurable, allowing adjustment between accuracy, operating range and measurement time. It can be interfaced via I²C or PWM with the included 200 mm accessory cable. Features Range: 0 - 40 m Laser Emitter Accuracy: +/- 2.5 cm at distances greater than 1 m Power: 4.75 V- 5 V DC; 6 V Max Current Consumption: 105 mA idle; 130 mA continuous Rep Rate: 1 Hz - 500 Hz Laser Wave Length/Peak Power: 905 nm/1.3 watts Beam Divergence: 8 m Radian Optical Aperture: 12.5 mm Interface: I²C or PWM Dimensions: 20 x 48 x 40 mm
RPLiDAR A1M8-R6 360-degree Laser Scanner Kit (12 m)
RPLIDAR A1 is a low cost 360-degree 2D laser scanner (LIDAR) solution. The system can perform 360-degree scan within 12-meter range. The produced 2D point cloud data can be used in mapping, localization and object/environment modeling.RPLIDAR A1’s scanning frequency reached 5.5 Hz when sampling 1450 points each round. And it can be configured up to 10 Hz maximum.RPLIDAR A1 is basically a laser triangulation measurement system. It can work excellent in all kinds of indoor environment and outdoor environment without direct sunlight exposure.Technical Specifications Recommended applications Vacuum robot, Home robot Measuring Range 0.15 - 12 m Sampling Frequency 8K Rotational Speed 5.5 Hz Angular Resolution ≤1° Dimensions 96.8 x 70.3 x 55 mm System Voltage 5 V System Current 100 mA Power Consumption 0.5 W Output UART Serial (3.3 voltage level) Temperature Range 0℃-40℃ Angular Range 360° Range Resolution ≤1% of the range (≤12 m)≤2% of the range (12～16 m) Accuracy 1% of the range (≤3 m)2% of the range (3-5 m)2.5% of the range (5-25 m) DownloadsDatasheet
LDROBOT D500 LiDAR Kit - 360-degree Laser Range Scanner (12 m)
Time-of-flight ranging technology Using time-of-flight ranging technology, the distance is measured according to the flight time of the laser pulse. Within the effective detection range of 12 m, the radar ranging accuracy will not change with the distance, and the average ranging accuracy of ±45 mm can be achieved. With the first-class algorithm logic of LDROBOT, it can realize the robot's 360-degree environmental detection, autonomous mapping and obstacle detection. Long lasting Brushless Motor, high speed wireless data transmission, life time up to 10,000 hours of use. Resistant to bright light The rigorous optical design and powerful chip capability ensure that the STL-19P is resistant to strong light, and can effectively avoid strong light interference, and can resist 30,000 Lux of strong light, It is able to achieve high frequency and high precision distance measurement and accurate map building indoors and outdoors. 360° all-round laser-scanning The STL-19P rotates clockwise in the rangefinder core, enabling 360 degree scanning and range detection of the surrounding environment. This results in a contour map of the surrounding environment and a point cloud of information on the location of obstacles. Distance measurement up to 12 m radius The longer range allows the robot to perceive environmental information over a longer range, ensuring the robot's ability to cruise and build maps over a large area. Compact and stylish The compact structure design, with its stylish appearance, smaller size and lower power consumption, can be built into the machine, reducing the overall size and improving the robot's passability. Applications Home service robot Commercial service robot Special robot Drone Industrial robot Specifications Distance measuring range 0.02-12 m Scanning frequency 5-13 Hz Ranging accuracy ±45 mm Ranging frequency 4500 Hz Scanning angle 360° Size 38.6 x 38.6 x 34.8 mm Included 1x Lidar STL-19P 1x Serial line 1x Interface adapter 1x USB cable 1x User manual Downloads GitHub
€ 89,95
Members € 80,96
