Features Compatible with Raspberry Pi 4 only Cutout in lid for 40x30mm heatsink or Fan SHIM Super-slimline profile Fully HAT-compatible Protects your beloved Pi Clear top and base leave Raspberry Pi 4 visible GPIO cut-out Handy laser-etched port labels Leaves all ports accessible Made from lightweight, high-quality, cast acrylic Great for hacking and tinkering! Made in Sheffield, UK Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99 × 66 × 15 mm. In the video below you can see a quick assembly guide.

Read more less

Grove - Time of Flight Distance Sensor-VL53L0X is a high speed, high accuracy and long range distance sensor based on VL53L0X. The VL53L0X is a new generation Time-of-Flight (ToF) laser-ranging module and it is one of the smallest on the market today. It provides accurate distance measurement independent of the target reflectances, making it superior to other conventional technologies. It can measure absolute distances up to 2 m, raising the standards in ranging performance levels and allowing various new applications. The VL53L0X integrates a leading-edge SPAD array (Single Photon Avalanche Diodes) and embeds ST’s second generation Flight SenseTM patented technology. The VL53L0X’s 940 nm VCSEL emitter (Vertical-Cavity Surface-Emitting Laser), is totally invisible to the human eye, coupled with internal physical infrared filters, it enables longer ranging distances, higher immunity to ambient light, and better robustness to cover glass optical crosstalk. Features VCSEL driver Ranging sensor with advanced embedded microcontroller Advanced embedded optical cross-talk compensation to simplify cover glass selection Safe for eyes: Class 1 laser device compliant with latest standard IEC 60825-1:2014 - 3rd edition Single power supply I²C interface for device control and data transfer Xshutdown (reset) and interrupt GPIO Programmable I²C address Working voltage: 3.3 V / 5 V Working temperature: 20 ℃ - 70 ℃ Recommended measurement distance: 30 mm - 1000 mm Default I²C address: 0x52 Included 1x Grove - Time of Flight Distance Sensor-VL53L0X 1x Grove Cable

Read more less

This flash memory allows you to store and read data externally via the SPI interface of your microcontroller. The control of the module is exactly the same as with a conventional SD card and is therefore particularly simple. The module is especially suitable for mobile setups, where normal SD cards could slip out of the SD card slot. Specifications Special feature 3 V and 5 V operation due to the integrated voltage converter Supply voltage Vcc 3-5 V Logic level Vcc Interface SPI Memory size 512 MB Clock frequency Up to 50 MHz Dimensions 18 x 22 x 12 mm Weight 3 g

Read more less

The Waveshare PCIe to Gigabit Ethernet and USB 3.2 Gen 1 HAT+ is an expansion board designed specifically for the Raspberry Pi 5. It enhances the Raspberry Pi's connectivity by adding three high-speed USB 3.2 Gen 1 ports and a Gigabit Ethernet port, all in a driver-free, plug-and-play setup. Features Based on 16-pin PCIe Interface of Raspberry Pi 5 Equipped with RTL8153B high-performance Gigabit Ethernet chip Supports Raspberry Pi OS, Ubuntu, OpenWRT, etc. Stable and reliable network speed Real-time monitoring of power status Supports USB port power control via software Included 1x PCIe to Gigabit Ethernet USB 3.2 HAT+ 1x Network cable (1.5 m) 1x 16P Cable (40 mm) 1x Standoff pack Downloads Wiki

Read more less

The Pimoroni Explorer Starter Kit is an electronic adventure playground for physical computing based on the RP2350 chip. It includes a 2.8-inch LCD screen, a speaker, a mini breadboard and much more. It's ideal for tinkering, experiments, and building small prototypes. Features Mini breadboard for wiring up components Servo headers Analog inputs Built-in speaker Plenty of general purpose inputs/outputs Connectors for attaching crocodile leads Qw/ST connectors for attaching I²C breakouts Specifications Powered by RP2350B (Dual Arm Cortex-M33 running at up to 150 MHz with 520 KB of SRAM) 16 MB of QSPI flash supporting XiP 2.8" IPS LCD screen (320 x 240 pixels) Driver IC: ST7789V Luminance: 250 cd/m² Active area: 43.2 x 57.5 mm USB-C connector for programming and power Mini breadboard Piezo speaker 6x user-controllable switches Reset and boot buttons Easy access GPIO headers (6x GPIOs and 3x ADCs, plus 3.3 V power and grounds) 6x Crocodile clip terminals (3x ADCs, plus 3.3 V power and grounds) 4x 3-pin servo outputs 2x Qw/ST (Qwiic/STEMMA QT) connector 2-pin JST-PH connector for adding a battery Lanyard slot! Includes 2x desktop stand feet Fully-assembled (no soldering required) Programmable with C/C++ or MicroPython Included 1x Pimoroni Explorer 1x Multi-Sensor Stick – a fancy new all-in-one super sensor suite for environmental, light and movement sensing Selection of different colored LEDs to get blinky with (including red, yellow, green, blue, white and RGB) 1x Potentiometer (for analog amusements) 3x 12 mm switches with different coloured caps 2x Continuous rotation servos 2x 60 mm wheels for attaching to your servos 1x AAA battery holder (batteries not included) 1x Velcro to stick the battery holder to the back of Explorer 20x Pin to pin and 20x pin to socket jumper wires for making connections on your breadboard 1x Qw/ST cable to plug in the Multi-Sensor Stick 1x Silicon USB-C cable Downloads GitHub Schematic

Read more less

The GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for soldering or breadboards: plug in your Grove sensors and start programming directly. Grove is an easy-to-use collection of more than 100 inexpensive plug-and-play modules that sense and control the physical world. By connecting Grove Sensors to Raspberry Pi, it empowers your Pi in the physical world. With hundreds of sensors to choose from Grove families, the possibilities for interaction are endless. Set-up in 4 simple steps Slip the GrovePi+ board over your Raspberry Pi Connect the Grove modules to the GrovePi+ board Upload your program to Raspberry Pi Begin taking in the world data

Read more less