6 products

  • WeMos D1 mini Pro – ESP8266 based WiFi Module

    WeMos D1 mini Pro - ESP8266 based WiFi Module

    This mini WiFi board has 16 MB flash, external antenna connector and built-in ceramic antenna based on ESP8266EX. Features 11 digital input/output pins Interrupt/pwm/I²C/one-wire 1 analog input (3.2 V max input) 16 MB Flash External antenna connector Built-in ceramic antenna CP2104 USB-TO-UART IC Specifications Operating Voltage 3.3 V Digital I/O Pins 11 Analog Input Pins 1 (3.2 V max) Clock Speed 80/160 MHz Flash 16 MB Size 34.2 x 25.6 mm Weight 3 g Pin Configuration Pin Function ESP8266 Pin RX RXD RXD A0 Analog input, max 3.2 V A0 D0 IO GPIO16 D1 IO, SCL GPIO5 D2 IO, SDA GPIO4 D3 IO, 10k Pull-up GPIO0 D4 IO, 10k Pull-up, BUILTIN_LED GPIO2 D5 IO, SCK GPIO14 D6 IO, MISO GPIO12 D7 IO, MOSI GPIO13 D8 IO, 10k Pull-down, SS GPIO15 G Ground GND 5V 5 V - 3V3 3.3 V 3.3 V RST Reset RST Included 1x WeMos D1 mini Pro (based on ESP8266EX) 2x Pin header (short) 2x Female connector strip (short) 2x Female connector strip (long)

    € 14,95

    Members € 13,46

  • ESP-12F – ESP8266-based Wi-Fi Module

    ESP-12F - ESP8266-based Wi-Fi Module

    This Wi-Fi module is based on the popular ESP8266 chip. The module is FCC and CE certified and RoHS compliant. Fully compatible with ESP-12E. 13 GPIO pins, 1 analog input, 4 MB flash memory.

    € 8,95

    Members € 8,06

  • ESP8266 ESP-01 WiFi Module

    Espressif ESP8266 ESP-01 WiFi Module

    The ESP8266 is an impressive, low cost WiFi module suitable for adding WiFi functionality to an existing microcontroller project via a UART serial connection. The module can even be reprogrammed to act as a standalone WiFi connected device – just add power! 802.11 b/g/n protocol Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack This module is a self-contained SOC (System On a Chip) that doesn’t necessarily need a microcontroller to manipulate inputs and outputs as you would normally do with an Arduino , for example, because the ESP-01 acts as a small computer. Thus, you can give a microcontroller internet access like the Wi-Fi shield does to the Arduino, or you can simply program the ESP8266 to not only have access to a Wi-Fi network, but to act as a microcontroller as well, which makes the ESP8266 very versatile.

    € 7,50

    Members € 6,75

  • NodeMCU Microcontroller Board with ESP8266 and Lua

    Espressif NodeMCU Microcontroller Board with ESP8266 and Lua

    1 review

    Note: NodeMCU is the name of both a firmware and a boardNodeMCU is an open source IoT platform, whose firmware runs on Espressif's SoC Wi-Fi ESP8266, based on the ESP8266 nonOS SDK. Its hardware is based on the ESP-12 module. The scripting language is Lua which allows to use many open source projects like lua-cjson and spiffs. Features Wi-Fi Module – ESP-12E module similar to ESP-12 module but with 6 extra GPIOs. USB – micro USB port for power, programming and debugging Headers – 2x 2.54 mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins Reset & Flash buttons Power: 5V via micro USB port Dimensions: 49 x 24.5 x 13 mm

    € 9,95

    Members € 8,96

  • ESP-01 Adapter Module 3.3-5 V (compatibel met Arduino)

    Kuongshun ESP-01 Adapter Module 3.3-5 V (Arduino compatible)

    Don't send 5 V signals to your ESP8266. The use of an ESP8266 with Arduino requires logic level translation of the UART signal, as provided by this easy 3.3 V - 5 V adapter. It makes the ESP-01 ESP8266 WiFi module (150445-91) the easiest WiFi transceiver for your Arduino (5 V). Adapter module for ESP-01 Wi-Fi module 3.3 V voltage regulator circuit & onboard level conversion for easy use of 5 V microcontroller with ESP-01 Wi-Fi module Compatible with Uno R3 4.5 ~ 5.5 V (on-board 3.3 V LDO Regulator) Interface logic voltage: 3.3 V / 5 V compatible (on-board level shift) Current: 0 - 240 mA

    € 5,95

    Members € 5,36

  • RoundyFi - Ronde LCD Raad (gebaseerd op ESP-12E)

    SB Components RoundyFi - Round LCD Board (based on ESP-12E)

    Specifications Operating Voltage: 3.3 V ESP-12E MCU Display Size: 1.28 inch USB Port for Power & Data Transmission Interface Pins: 4 GPIO, 1 GND, 1 Power Driver: GC9A01 Resolution240 x 240 Pixel Color: 65 K RGB Interface: SPI Downloads STEP File Dimensions 3D File Schematic GitHub

    € 54,95

    Members € 49,46

The ESP8266 chip is a SoC (system on a chip) and powerful microcontroller with built-in Wi-Fi receiver. In addition, this microcontroller is relatively cheap compared to others. With this chip you have everything you need to get started with Wi-Fi at a cheap price.

Application of the ESP8266

Specially designed to connect to the Internet, the ESP8266 microcontroller has everything you need to help you do just that. This chip is perfect for DIY IoT & home automation projects. The ESP8266 can be used using the AT command firmware or by connecting it to a microcontroller.

ESP8266; an Arduino replacement

Many novice technicians start with the hardware and software of Arduino. It offers an easy entry into the world of microcontrollers and technology. Compared to Arduino, the ESP8266 is a lot more extensive and therefore less suitable for the beginner. This does not have to be a barrier, there are many manuals available online. This way everyone can learn how to use the ESP8266.

The ESP8266 is sometimes sold as a WiFi shield for Arduino, but this really diminishes the capabilities and power of the ESP. For most projects, with an ESP8266 you no longer even need an Arduino.

ESP8266; Raspberry Pi and WiFi

With an ESP8266 it is possible to affordably add a Wi-Fi module to your microcontroller. An example project of what you can create with an ESP8266 is to use it on your Raspberry Pi RP2040 as an MCU to control the I/O pins.

NodeMCU or Wemos

Two popular Arduino controllers with ESP8266 are the NodeMCU and Wemos. These Wi-Fi compatible controllers are suitable for IoT projects and can be easily connected to the internet thanks to the ESP.

Differences between ESP8266 and ESP32

The difference between the ESP32 and ESP8266 is the lack of Bluetooth in the ESP8266. The ESP32 has further developed the technology of the 8266. You could say that the ESP8266 was a predecessor of the ESP32.


Forgot password?

Don't have an account yet?
Create an account