Raspberry Pi Pico EVB combined with the WizFi360-PAWizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin-compatible with Raspberry Pi Pico board and can be used for IoT Solution development.Specifications RP2040 microcontroller with 2 MByte Flash Dual-core cortex M0+ at up to 133 MHz 264 kByte multi-bank high performance SRAM External Quad-SPI Flash with eXecute In Place (XIP) Includes WizFi360-PA Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE WiFi 2.4G, 802.11 b/g/n Support Station / SoftAP / SoftAP+Station operation modes Support “Data pass-through” and “AT command data transfer” mode Support serial AT command configuration Support TCP Server / TCP Client / UDP operating mode Support configuration of operating channel 0 ~ 13 Support auto 20 MHz / 40 MHz bandwidth Support WPA_PSK / WPA2_PSK encryption Support built-in unique MAC address and user configurable Industrial grade (operating temperature range: -40°C ~ 85°C) CE, FCC certification Includes 16 Mbit Flash Memory Micro-USB B port for power and data (and for reprogramming the Flash) 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1' through-hole pins also with edge castellations 3-pin ARM Serial Wire Debug (SWD) port Built-in LDO DownloadsDocumentation

Read more less

After power on, YDLIDAR G4 start rotating and scanning the environment around it. The scanning distance is 16 m and the device offers a scanning rate of 9,000 times per second. It makes detailed examinations of its environment and can locate the smallest of objects surrounding it. Featuring a high-precision brushless motor and encoder disc mounted on bearings, it rotates smoothly and has a service life of up to 500,000 hours of operation. The G4 is an inexpensive solution for projects that require obstacle detection, obstacle avoidance, and/or simultaneous localization and mapping (SLAM). All YDLIDAR products are ROS ready. Features 360 degree 2D range scanning Stable performance, high precision 16 m range Strong resistance to environmental light interference Brushless motor drive, stable performance FDA Laser safety standard Class I 360 degree omnidirectional scanning, 5-12 Hz adaptive scanning frequency OptoMagnetic technology Wireless data communication Scanning rate of 9000 Hz Downloads Datasheet User Manual Development Manual SDK Tool ROS

Read more less

YDLIDAR SDM18 is a high-performance single-point LiDAR. Based on the principle of ToF, it is equipped with related optics, electricity, and algorithm design to achieve high-precision laser distance measurement and outputting high frame rate point cloud data of the scanning environment. It can be used for UAV alt-hold, robot obstacle avoidance and navigation, etc. Specifications High Ranging frequency: 50-250 Hz Range Distance: 0.2-18 m FDA Class I eye safety standard Support UART and I²C interfaces Dimensions: 21 x 15 x 7.87 mm Weight: 1.35 g Applications UAV alt-hold and obstacle avoidance Robot obstacle avoidance Intelligent equipment obstacle avoidance Navigation and obstacle avoidance of home service robots / robot vacuum cleaners Downloads Datasheet User Manual Development Manual SDK Tool ROS

Read more less

YDLIDAR TG15 is a 360-degree two-dimensional rangefinder. Based on the principle of TOF, it is equipped with related optics, electricity, and algorithm design to achieve high-frequency and high-precision distance measurement. The mechanical structure rotates 360 degrees to continuously output the angle information as well as the point cloud data of the scanning environment while ranging. Features 360 degree omnidirectional scanning ranging distance measurement Small distance error, stable performance and high accuracy IP65 protection level Strong resistance to ambient light interference Industrial grade brush-less motor drive for stable performance Laser power meets Class I laser safety standards 5-12 Hz adaptive scanning frequency (support customization) Photomagnetic fusion technology to achieve wireless communication, wireless power supply Ranging frequency up to 20 kHz (support customization) Applications Robot navigation and obstacle avoidance Industrial automation Robot ROS teaching and research Regional security Smart transportation Environmental scanning and 3D reconstruction Commercial robot /Robot vacuum cleaner Downloads Datasheet User Manual Development Manual SDK Tool ROS

Read more less

YDLIDAR TG30 is a 360 degrees 2D LiDAR. Based on the principle of ToF, it is equipped with related optics, electricity, and algorithm design to achieve high-frequency and high-precision distance measurement. The mechanical structure rotates 360 degrees to continuously obtain the angle information and output the point cloud data of the scanning environment while ranging. Features IP65 protection level 360 degrees omnidirectional scanning and 5-12 Hz frequency Ranging frequency up to 20 kHz High accuracy, stable performance Strong resistance to ambient light interference Class I eye safety Specifications Range Frequency 20000 Hz Scan Frequency 5-12 Hz Range Distance 0.05-30 m Scan Angle 360° Angle resolution 0.09°-0.22° Size Φ 75.8 x 34.7 mm Applications Robot navigation and obstacle avoidance Industrial automation Regional security Smart transportation Environmental scanning and 3D reconstruction Digital multimedia interaction Robot ROS teaching and research Downloads Datasheet User manual Development manual

Read more less

YDLIDAR X4PRO is a 360 degrees two-dimensional rangefinder. Based on the principle of triangulation, it is equipped with related optics, electricity, and algorithm design to achieve high-frequency and high- accuracy distance measurement. The mechanical structure rotates 360 degrees to continuously output the angle information as well as the point cloud data of the scanning environment while ranging. Features 360 degrees omnidirectional scanning ranging distance measurement Small distance error, stable performance and high accuracy Wide ranging distance Strong resistance to ambient light interference Low power consumption, small size and long service life Laser power meets Class I laser safety standards Adjustable motor speed, scanning frequency is 6~12 Hz High-speed ranging, ranging frequency up to 5 kHz Applications Robot navigation and obstacle avoidance Robot ROS teaching and research Regional security Environmental scanning and 3D reconstruction Navigation and obstacle avoidance of robot vacuum cleaner/ROS Learning robot Specifications Range Frequency 5000 Hz Scan Frequency 6-12 Hz Range Distance 0.12 10 m Scan Angle 360° Angle Resolution 0.43-0.85° Dimensions 110.6 x 71.1 x 52.3 mm Downloads Datasheet User Manual Development Manual SDK Tool ROS

Read more less

The Ynvisible Segment E-Paper Displays are thin & flexible, sunlight readable, very easy to operate, and that they are the most energy-efficient display technology on the market for most applications. Get started today! Evaluate the ultra-low-power, thin and flexible Segment E-Paper Displays. The kit contains display designs and includes a manual display driver as well as a display driver with I²C interface. Display parameters White Reflectance 40% Contrast Ratio (Yb/Yd) 1:3 Angle Dependency No, lambertian Thickness 300 µm Graphical layout Segments Segment dimensions 1-100 mm Response time 100-1000 ms Power parameters Driving voltage 1.5 V Driving method Direct drive Energy consumption 1 mJ/cm^2 Pulse energy 0.25 mJ/cm^2 Image retention w/o power 1-5 minutes Operating conditions -20°C - +60°C Activations/Cycles 1.000.000 Included Ynvisible Segment Displays (‍Segmented e-paper displays with different layouts, shapes, and symbols, suitable for testing and evaluation.) 3 single-digit display 1 double-digit display 5 single-segment/icon displays 4 progress bars (7-segment and 3-segment) Manual Display Clicker (Manual display controller for ON/OFF operations) Display Driver and Software Library (Dedicated display driver with I²C communication interface. Compatible with Arduino and other easy-to-use development boards.) Flexible Display Adapter (‍For convenient connection of the flexible displays on a plastic substrate to rigid electronics (such as development boards), using a FFC/FPC connector.) Downloads Datasheet Guide & Instructions

Read more less

This adjustable circuit board holder is ideal for clamping PCB for soldering, desoldering or rework. Features 2 adjustable grips on a retractable stand to accommodate various board sizes. The adjustable clamps allow the PCB to rotate 360 degrees and stay set in any position. The base of this rigid metal stand features four rubber feet to ensure stability. Specifications Product size 30 x 16.5 x 12.5 cm Max. holding size 20 x 14 cm Weight 450 g

Read more less

This multi-purpose tool offers an excellent all round solution, ideal for holding big size PCBs and desoldering work, etc. Features The arms of the repair station can move up and down conveniently, easy for operation. The adjustable parts are made of the same material for microscope, with high quality, perfect stability and precision. The rubber feet can move in all directions, ensuring the operation platform is always on a flat surface. Suitable for desoldering BGA ICs. Specifications Rough adjusting range in height 0∼230 mm Precise adjusting range in height 0∼60 mm Max. holding size of PCB 250 mm (length or width) Min. holding size of PCB 20 mm (length or width)

Read more less

This mechanical arm is a perfect tool for holding a soldering iron, hot air pump and other suitable tools.

Read more less

This PCB holder is ideal for any application where a third or fourth hand and a magnifying lamp are needed. Features The helping hands with 4 adjustable gooseneck arms. LED magnifying lamp with USB-C interface. Metal base with non-slip rubber strips. Comes with a cleaning ball, a sponge, a solder wire stand and rosin. Specifications Length of gooseneck arms: 270 mm LED magnifying lamp with 5-diopter lens Power supply via USB Dimensions (stand): 185 x 175 x 20 mm Weight: 620 g

Read more less

Fumes released during the soldering process are potentially harmful to health. This solder fume extractor is securely fastened to the work table with a bracket. Thanks to the 3 axes, the solder fume extractor can be positioned perfectly, i.e. directly above the rising solder fumes. The harmful solder fumes are extracted by a powerful but quiet fan and filtered by an activated-carbon filter mat. Features Removes solder fumes Absorbs toxic gases and fumes from brazing operations Helps reduce the likelihood of headaches, eye irration and neusea Adjustable absorption angle for accurate placement Easy replaceable activated carbon filter High-performance fan Low noise and long life service Specifications Absorption capacity: 1 m³/min (max.) Power consumption: 23 W Power supply: 220-240 VAC Amount of activated carbon filter: 7 g Maximum absorption weight: 2 g Dimensions: 220 x 270 x 168 mm (W x H x D) Weight: 1.4 kg

Read more less

This silicone soldering mat can be used as a base for all kinds of soldering work such as assembly or repair. Specifications Withstands 200-230°C constantly and 480-500°C for short periods Ideal for soldering electronics components or repairing PCBs, smartphones, etc. Color: Green Dimensions: 209 x 295 mm

Read more less

The ZD-5L Hot Glue Gun is a versatile and easy-to-use tool designed for household, DIY, and professional use. It features a compact and lightweight design for comfortable handling, and its built-in stand ensures safe and stable operation. Whether you're a DIY enthusiast or a professional, this Glue Gun is a perfect addition to your toolkit, an efficient and practical solution for bonding, repairing, and creating. It is ideal for various materials like glass, cardboard, metal, plastic, leather, fabric and more. The ZD-5L uses 7.2 mm glue sticks. It is powered by an 18650 battery and charged via USB-C. Specifications Charging Voltage 5 V DC Charging Current Adaptive, 2 A (max) Charging Interface USB-C Battery 18650 Lithium Glue Stick 7.2 mm OD Heat-up time approx. 2 min. Time of Use approx. 60 min. Sleep Time 5 min. without action Included 1x ZD-5L Glue Gun 1x 18650 Lithium battery (2200 mAh) 2x Glue Sticks (10 cm) 1x USB cable

Read more less

This 2-in-1 hot air soldering station offers a cost-effective solution for soldering and desoldering all types of SMD components. Features Incl. soldering iron and hot air pump. It is suitable for soldering and desoldering all types of surface mounted IC, PCB or components. The control unit has 2 LEDs that display the temperature and in °C and °F. The temperature can be easily adjusted with simple up/down buttoms. The hot air temperature can be calibrated from 3L/min to 24L/min continuously. Temperature is micro-processor controlled and can be adjusted. Temperature range: 50-480°C for soldering iron, 100-500°C for hot air pump. Specifications Power Soldering iron: 24 V, 60 WHot air pump: 300 W Power supply 220-240 V AC/50 Hz Temperature range Soldering iron: 50-480°CHot air pump: 100-500°C Dimensions 113 x 125 x 175 mm Weight 2 kg Included 1x ZD-8922 Rework station 1x Soldering iron 1x Hot air gun 3x Hot air nozzles 1x Soldering iron with needle bit 1x Power cord 1x Soldering iron stand with sponge

Read more less

The ZD-8951 is a 3-in-1 temperature-controlled digital soldering station with built-in fume extractor and LED lighting. The rapid-heating function reaches a temperature of 400°C in less than 1 minute. Specifications (Soldering Iron) Power: 60 W (max. 130 W) Temperature range: 160°C to 480°C (320°F to 896°F) PTC rapid heating element With °C/°F conversion function Temperature can be easily adjusted with the knob. LCD display with changing backlight. With rapid heating function, it takes less than 1 minute to rise from the room temperature to 400°C (752°F). Specifications (Fume Extractor) Power: 23 W Air flow: 1 m³/min (max) Specifications (LED Light) Power: 5 W Lighting: 12 LEDs Brightness: 242 lm

Read more less

This temperature-controlled digital soldering station with adjustable temperature range from 160°C to 480°C is an affordable and reliable tool for all kinds of soldering work in the (home) laboratory. Thanks to the high-quality coated heating element, the desired soldering temperature (Celsius or Fahrenheit) is quickly reached and shown on the LED display. Features A temperature controlled soldering station with adjustable temperature range from 160°C to 480°C (320°F to 896°F). A two-line LED readout simultaneously displays temperature setting and actual temperature. Gloss finish pleasing to the eye. Compact and lightweight soldering iron with silicone cord. A user-friendly soldering iron handle with a foam sleeve. Easier way to achieve °C/°F conversion with the asterisk button. Specifications Power 25 W (max. 50 W) Display LED Temperature 160°C to 480°C (320°F to 896°F) Temperature deviation ±5% Grounded Yes Heating rate Melt solder within 20s Withstand voltage 1500/1MA Input voltage AC 220-240 V (50 Hz) Output voltage 24 V Included ZD-8961-A Soldering station Solderin iron stand Soldering iron with soldering tip N8-1 Cleaning sponge Cleaning ball Power cord (EU)

Read more less

This Rework Station Bundle, consisting of the ZD-8968 Hot Air Rework Station and the ZD-11P PCB holder, offers precise temperature control, adjustable airflow, and a stable hold for your circuit board. The ZD-8968 Hot Air Rework Station is a high-performance device designed for precision desoldering and rework tasks with SMD components. It features a wide temperature range of 100-500°C (212-932°F), with adjustable air and temperature control, a clear LED display, and an automatic sleep mode for enhanced safety and efficiency. The ZD-11P PCB Holder is equipped with 5 adjustable 360° rotatable goosenecks (4 with alligator clips, 1 with flashlight holder + flashlight), providing additional flexibility and stability. It securely holds the PCB in place, making the handling of SMD components easier and more precise. Features 300 W heating power ensures quick heat-up Wide temperature range 100-500°C (212-932°F) allows precise control Closed-loop sensor and MCU zero-crossing design ensure accurate and stable temperature regulation. The hot air pump handle includes a built-in sensor that switches to Working Mode when picked up and to Standby Mode when placed back in the holder. Automatic standby mode activates after 10 minutes of inactivity. Automatic cooling system and deferred power-off function protect the heating element. Brushless motor fan provides quiet operation, smooth airflow, and an extended lifespan. High-quality heating element doubles working efficiency and saves energy. LED digital display for clear monitoring of temperature settings. Simple buttons for adjusting air volume and temperature. Switching between °C and °F Heat-resistant stand with hot air gun holder, 5 flexible adjustable arms with alligator clips and a flashlight (AA battery not included) Specifications ZD-8968 Hot Air Rework Station Power 300 W Temperature range 100-500°C (212-932°F) Power supply 220-240 V AC/50 Hz Weight 1.2 kg ZD-11P PCB Holder Base (Dimensions) 210 x 134 mm Metal rod (Height) 250 mm Included Base, metal rod, 4 gooseneck arms with alligator clips, 1 gooseneck arm with flashlight holder Included 1x ZD-8968 Hot Air Rework Station 1x ZD-11P PCB Holder (stand with soldering iron holder with 5 adjustable arms, 4 with alligator clips and 1 with flashlight holder) 1x Flashlight (AA battery not included) 3x Hot air nozzles (79-7911, 79-7912, 79-7913) 1x Power cord (EU) 1x Power cord (UK) 1x Manual

Read more less

The powerful soldering station with LCD panel has been designed for a wide temperature range (from 150-450°C) and is ideal for general purpose soldering as well as specialized lead-free soldering applications. The soldering iron is controlled automatically by the microprocessor. With its high-quality sensor the heat exchange system guarantees precise temperature control at the soldering tip. This digital temperature controlled soldering station includes a holder and cleaning sponge. Specificaties Operating voltage 220-240 V, 50 Hz Power consumption 80 W Soldering iron power 48 W Operating voltage soldering iron 24 V Temperature (adjustable) 150-450°C Dimensions 195 x 87 x 165 mm

Read more less