WIZnet W6100-EVB-Pico

  • BrandWIZnet

Description

W6100-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.

Features

  • RP2040 microcontroller with 2 MByte Flash
    • Dual-core cortex M0+ at up to 133 MHz
    • 264 kByte multi-bank high performance SRAM
    • External Quad-SPI Flash with eXecute In Place (XIP)
    • High performance full-crossbar bus fabric
    • 30 multi-function General Purpose I/O (4 can be used for ADC)
      • 1.8-3.3 V I/O voltage (Note: Pico I/O voltage is fixed at 3.3 V)
    • 12-bit 500 ksps Analogue to Digital Converter (ADC)
    • Various digital peripherals
      • 2x UART, 2x I²C, 2x SPI, 16x PWM channels
      • 1x Timer with 4 alarms, 1x Real Time Counter
    • 2x Programmable IO (PIO) blocks, 8 state machines total
    • Flexible, user-programmable high-speed I/O
    • Can emulate interfaces such as SD card and VGA
  • Includes W6100
    • Supports Hardwired Internet Protocols: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
    • Supports 8 independent SOCKETs simultaneously with 32 KB memory
    • Internal 16 Kbytes Memory for TX/RX Buffers
    • SPI Interface
  • Micro-USB B port for power and data (and for reprogramming the Flash)
  • 40-pin 21x51 ‘DIP’ style 1 mm thick PCB with 0.1' through-hole pins also with edge castellations
  • 3-pin ARM Serial Wire Debug (SWD) port
  • 10 / 100 Ethernet PHY embedded
  • Supports Auto Negotiation
    • Full / Half Duplex
    • 10 / 100 Based
  • Built-in RJ45 (RB1-125BAG1A)
  • Built-in LDO (LM8805SF5-33V)

Downloads

Product form

W6100-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W6100 – and... Read more

€ 21,95 € 8,78 (incl. VAT)
Members identical

    Details

    SKU: 20428
    EAN: 020428

    Description

    W6100-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.

    Features

    • RP2040 microcontroller with 2 MByte Flash
      • Dual-core cortex M0+ at up to 133 MHz
      • 264 kByte multi-bank high performance SRAM
      • External Quad-SPI Flash with eXecute In Place (XIP)
      • High performance full-crossbar bus fabric
      • 30 multi-function General Purpose I/O (4 can be used for ADC)
        • 1.8-3.3 V I/O voltage (Note: Pico I/O voltage is fixed at 3.3 V)
      • 12-bit 500 ksps Analogue to Digital Converter (ADC)
      • Various digital peripherals
        • 2x UART, 2x I²C, 2x SPI, 16x PWM channels
        • 1x Timer with 4 alarms, 1x Real Time Counter
      • 2x Programmable IO (PIO) blocks, 8 state machines total
      • Flexible, user-programmable high-speed I/O
      • Can emulate interfaces such as SD card and VGA
    • Includes W6100
      • Supports Hardwired Internet Protocols: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
      • Supports 8 independent SOCKETs simultaneously with 32 KB memory
      • Internal 16 Kbytes Memory for TX/RX Buffers
      • SPI Interface
    • Micro-USB B port for power and data (and for reprogramming the Flash)
    • 40-pin 21x51 ‘DIP’ style 1 mm thick PCB with 0.1' through-hole pins also with edge castellations
    • 3-pin ARM Serial Wire Debug (SWD) port
    • 10 / 100 Ethernet PHY embedded
    • Supports Auto Negotiation
      • Full / Half Duplex
      • 10 / 100 Based
    • Built-in RJ45 (RB1-125BAG1A)
    • Built-in LDO (LM8805SF5-33V)

    Downloads

    Login

    Forgot password?

    Don't have an account yet?
    Create account