UNI-T UPO1104 4-ch Phosphor Oscilloscope (100 MHz)

  • BrandUni-Trend

Description

The UPO1104 4-channel digital oscilloscope utilizes Ultra Phosphor 2.0 technology. It features a bandwidth of 100 MHz and a real-time sampling rate of up to 2 GSa/s. It supports an independent DVM module. offers extensive trigger and bus decoding functions. and supports full-memory hardware real-time decoding.

The UPO1104 can be widely used in embedded system design. instrumentation. consumer electronics. automotive electronics. field maintenance. education. and many other fields.

Features

  • Bandwidth: 100 MHz
  • Channels: 4
  • Sampling rate: 2 GSa/s
  • Vertical scale: 500?V/div-20 V/div
  • Low-base noise: <100?Vrms
  • Maximum storage depth up to 56 Mpts
  • Waveform capture rate of up to 500.000 wfms/s
  • The hardware can be continuous waveform recording 120.000 frames in real time
  • Automatic measurement of 36 waveform parameters. the measurement range divides into screen and cursor area
  • Supports 7 digits hardware frequency meter measurement
  • DVM supports AC/DC TRMS (true virtual value) measurement
  • Waveform calculation function (FFT. add. subtract. multiply. divide. digital filter. logical operation and advanced operation)
  • 1M sampling points to enhance FFT function. it supports frequency setting. waterfall curve. demodulation mode and marker measurement
  • Multiple trigger functions (edge. pulse width. video. slope. runt pulse. over-amplitude pulse. delay. timeout. duration. setup hold. Nth edge and code pattern)
  • Supporting RS232. I²C. SPI trigger
  • Innovative RS232. I²C. SPI full memory hardware for real-time decoding
  • Ultra phosphor display effect. 256 grayscale display
  • 7-inch WVGA (800x480) TFT LCD
  • Multiple interfaces: USB Host. USB Device. LAN. EXT Trig. AUX Out (Trig Out. Pass/Fail. DVM)
  • Supporting waveform navigation. marker and segment
  • Supporting SCPI programmable standard command
  • Support WEB access and control
  • Dimensions: 306 x 138 x 107 mm
  • Weight: 2.45 kg

Specifications

Model UPO1104 UPO1204
Bandwidth 100 MHz 200 Mhz
Analog channels 4 4
Real-time sampling rate 2 GSa/s 2 GSa/s
Rise time ?3.5 ns ?1.8 ns
Storage depth 56 Mpts 56 Mpts
Waveform capture rate 500.000 Wfms/s 500.000 Wfms/s

Included

  • 1x UNI-T UPO1104 4-ch Phosphor Oscilloscope (100 MHz)
  • 1x Passive probe (100 MHz)
  • 1x Power cord
  • 1x USB cable
  • 1x Manual

Downloads

Product form

The UPO1104 4-channel digital oscilloscope utilizes Ultra Phosphor 2.0 technology. It features a bandwidth of 100 MHz and a real-time... Read more

€ 549,00 incl. VAT
Members € 494,10

      Details

      SKU: 20877
      EAN: 6935750511220

      Description

      The UPO1104 4-channel digital oscilloscope utilizes Ultra Phosphor 2.0 technology. It features a bandwidth of 100 MHz and a real-time sampling rate of up to 2 GSa/s. It supports an independent DVM module. offers extensive trigger and bus decoding functions. and supports full-memory hardware real-time decoding.

      The UPO1104 can be widely used in embedded system design. instrumentation. consumer electronics. automotive electronics. field maintenance. education. and many other fields.

      Features

      • Bandwidth: 100 MHz
      • Channels: 4
      • Sampling rate: 2 GSa/s
      • Vertical scale: 500?V/div-20 V/div
      • Low-base noise: <100?Vrms
      • Maximum storage depth up to 56 Mpts
      • Waveform capture rate of up to 500.000 wfms/s
      • The hardware can be continuous waveform recording 120.000 frames in real time
      • Automatic measurement of 36 waveform parameters. the measurement range divides into screen and cursor area
      • Supports 7 digits hardware frequency meter measurement
      • DVM supports AC/DC TRMS (true virtual value) measurement
      • Waveform calculation function (FFT. add. subtract. multiply. divide. digital filter. logical operation and advanced operation)
      • 1M sampling points to enhance FFT function. it supports frequency setting. waterfall curve. demodulation mode and marker measurement
      • Multiple trigger functions (edge. pulse width. video. slope. runt pulse. over-amplitude pulse. delay. timeout. duration. setup hold. Nth edge and code pattern)
      • Supporting RS232. I²C. SPI trigger
      • Innovative RS232. I²C. SPI full memory hardware for real-time decoding
      • Ultra phosphor display effect. 256 grayscale display
      • 7-inch WVGA (800x480) TFT LCD
      • Multiple interfaces: USB Host. USB Device. LAN. EXT Trig. AUX Out (Trig Out. Pass/Fail. DVM)
      • Supporting waveform navigation. marker and segment
      • Supporting SCPI programmable standard command
      • Support WEB access and control
      • Dimensions: 306 x 138 x 107 mm
      • Weight: 2.45 kg

      Specifications

      Model UPO1104 UPO1204
      Bandwidth 100 MHz 200 Mhz
      Analog channels 4 4
      Real-time sampling rate 2 GSa/s 2 GSa/s
      Rise time ?3.5 ns ?1.8 ns
      Storage depth 56 Mpts 56 Mpts
      Waveform capture rate 500.000 Wfms/s 500.000 Wfms/s

      Included

      • 1x UNI-T UPO1104 4-ch Phosphor Oscilloscope (100 MHz)
      • 1x Passive probe (100 MHz)
      • 1x Power cord
      • 1x USB cable
      • 1x Manual

      Downloads

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      Login

      Forgot password?

      Don't have an account yet?
      Create an account