The PeakTech 5620 is a professional thermal imaging camera with a high thermal resolution of 384x288 thermal image points and a variety of excellent features for work in building thermography or industrial use.
In addition to the pure thermal image display, this new development also offers a PIP (picture-in-picture) display, a real image camera or a fusion function in which the contours of the real image recording are combined with the thermal image in order to ensure an even better display.
All of the image modes mentioned can also be used for video recording, which also enables audio recordings for the respective video.
The many functions are controlled via push buttons on the device, but also via the touch screen function of the color TFT display.
All thermal images can be opened and evaluated using the enclosed software, with subsequent changes, e.g. can be done on the pallet selection.
Features
Professional thermal imaging technology
3.5" touchscreen and graphic menu navigation
Thermal image resolution of 384x288 pixels
High temperature measuring range up to +550°C
High quality thermal image sensor with high temperature sensitivity
Fast thermal imaging with 25 Hz
Seven color palettes (Iron, Rainbow, White, Black ...)
Photo and video recordings with audio commentary
WiFi, USB and Bluetooth interfaces
IP 54 protected against dust and splash water
Accessories: Hard case, 2x Li-Po battery, charger, carrying strap, connection cable, software and instructions
Specifications
Thermal Resolution
384 x 288 Pixel
Temperature Range
-20°C … 550°C (-4°F … 1022°F), 0,1° Resolution
Accuracy
±2% (±2°C)
Display
3.5" Touchscreen TFT
Thermal Sensivity
<40 mK
Field of View (FOV)
37,2°x 28,5°
Pixel Pitch
17 µm
IFOV
1.7 mrad
Wave Length
8 ... 14 µm
Emissivity
0.01~1.0
Image Frequency
25 Hz
Storage
Micro SD (64 GB)
Data Interface
USB, WiFi, Bluetooth
Operation voltage
5000 mAh / 3.7 V Li-Ion
Dimensions
100 x 244 x 104 mm
Weight
approx. 660 g
The PeakTech 1265 is an affordable 30 MHz 2-channel digital storage oscilloscope with a high-resolution TFT color display and extensive additional functions. It has a sampling rate of up to 250 MS/s and convinces with its high quality and easy handling with the best price/performance ratio. To quickly display each incoming waveform, simply press the Autoset key and the oscilloscope itself searches for the best possible display. With Autoscale, however, the scaling of the time base can be adjusted in a user-friendly manner. This oscilloscope has a VGA output for displaying the oscilloscope display on an external monitor or projector.
Features
2-channel oscilloscope with 30 MHz analog bandwidth at max. 250 MS/s sampling rate
8 inch (20 cm) TFT color display with 800 x 600 pixels
LAN, USB host, USB device & VGA interface
Autoset function for user-friendly operation
Recording length of max. 10,000 points
Automatic measurement modes, XY mode and FFT function
Specifications
Bandwidth
30 MHz
Channels
2
Screen size (TFT)
8' (20 cm)
Resolution
800 x 600 Pixel
Display Type
Color-TFT
Sampling 1 CH
250 MS/s
Sampling 2 CH
125 MS/s
Hor. scale max.
100 s/div
Hor. scale min.
5 ns/div
Memory depth
10,000 Points
Rise Time
< 14 ns
Vert. resolution
8 Bit
Vert. scale max.
10 V/div
Vert. scale min.
2 mV/div
Interfaces
1x USB, 1x LAN, 1x VGA
Mains voltage
110/240 V AC; 50/60 Hz
Included
PeakTech 1265 Oscilloscope
USB cable
Software CD for Windows
Power cord
2 probes
BNC cable
Carrying case
Manual
Downloads
Software
Datasheet_DE-EN
Datasheet_FR
Datasheet_IT
Datasheet_ES
The PeakTech 1240 is a 60 MHz 2-channel digital storage oscilloscope with a high-resolution TFT color display and extensive additional functions. It has a sampling rate of up to 500 MS/s and convinces with its high quality and easy handling with the best price/performance ratio.
Features
High-resolution TFT color display with 800 x 600 pixels and 65536 colors
USB port for real-time data transmission or reading of internal memory
Saving of measured values and graphics directly onto the USB-stick
VGA-output port for external monitor
Autoset and autoscale function for easy operation
LAN connection for remote access via network
Internal memory of 10 million points per channel or 15 waveforms
20 automatic measurement modes and FFT function
PASS/FAIL function
Safety: EN 61010-1; CAT II
Accessories: 2 pcs. BNC cable, USB cable, software CD for Windows 2000/XP/Vista/7/8/10, power cable, 2 probes, carrying case and manual
Specifications
Bandwidth
60 MHz
Display
20 cm (8”) TFT with 65536 colors
Resolution
800 x 600 Pixel
Channel
2 CH
Sampling mode
Normal/peak detect/average
Sampling rate each Channel
250 MSa/s
Input coupling
AC, DC, GND
Input impedance
1 MΩ +/- 2 % in parallel with 10 pF +/- 5 pF
Input voltage
400 V DC or ACpp
Sensitivity
2 mV - 10 V/Skt/div.
Rise time
< 5,8 ns
Accuracy
+/- 3 %
Vertical resolutions
8 Bits (2 CH simultaneously)
Horizontal scale
5ns-100s/Skt./div
Sampling range
0,5 - 250 S/s
Trigger type
Edge/Video/Pulse/Slope
Trigger mode
Auto, Normal, Single
Trigger coupling
DC, AC, LF, HF
20 automat. measurements
peak-peak, cycle RMS, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, rise time, fall time, +width, -width, +duty, -duty, delay A→B (rising), delay A→B(falling), frequency, period, min, max
Phase difference
+/- 3°
Record length
10.000.000 points/CH
Interfaces
USB Device 2.0, USB Host 2.0, VGA, LAN
Operation voltage
100~240 V ACrms / 50/60 Hz
Dimensions
340 x 155 x 70 mm
Weight
1.8 kg
ILI9341 is a 262144-color single-chip SOC driver for a TFT liquid crystal display with resolution of 240x320 dots (RGB), comprising a 720-channel source driver, a 320-channel gate driver, 172800 bytes GRAM for graphic display data of 240x320 dots (RGB), and power supply circuit.ILI9341 supports parallel 8-/9-/16-/18-bit data bus MCU interface, 6-/16-/18-bit data bus RGB interface and 3-/4-line serial peripheral interface (SPI).The moving picture area can be specified in internal GRAM by window address function. The specified window area can be updated selectively, so that moving picture can be displayed simultaneously independent of still picture area.ILI9341 can operate with 1.65V ~ 3.3V I/O interface voltage and an incorporated voltage follower circuit to generate voltage levels for driving an LCD.ILI9341 supports full color, 8-color display mode and sleep mode for precise power control by software and these features make the ILI9341 an ideal LCD driver for medium or small size portable products such as digital cellular phones, smart phone, MP3 and PMP where long battery life is a major concern.Features
Display resolution: 240 x 320 (RGB)
Output: 720 source outputs | 320 gate outputs | Common electrode output (VCOM)
a-TFT LCD driver with on-chip full display RAM: 172,800 bytes
System Interface
8-bits, 9-bits, 16-bits, 18-bits interface with 8080-Ⅰ/8080- Ⅱ series MCU
6-bits, 16-bits, 18-bits RGB interface with graphic controller
3-line / 4-line serial interface
Display mode:
Full color mode (Idle mode OFF): 262K-color
Reduced color mode (Idle mode ON): 8-color
Power saving modes:
Sleep mode
Deep standby mode
On chip functions:
VCOM generator and adjustment
Timing generator
Oscillator
DC/DC converter
Line/frame inversion
1 preset Gamma curve with separate RGB Gamma correction
Content Adaptive Brightness Control
MTP (3 times):
8-bits for ID1, ID2, ID3
7-bits for VCOM adjustment
Low-power consumption architecture
Low operating power supplies:
VDDI = 1.65V ~ 3.3V (logic)
VCI = 2.5V ~ 3.3V (analog)
LCD Voltage drive:
Source/VCOM power supply voltage
AVDD - GND = 4.5V ~ 5.5V
VCL - GND = -2.0V ~ -3.0V
Gate driver output voltage
VGH - GND = 10.0V ~ 20.0V
VGL - GND = -5.0V ~ -15.0V
VGH - VGL 3 ≦ 2V
VCOM driver output voltage
VCOMH = 3.0V ~ (AVDD – 0.5)V
VCOML = (VCL+0.5)V ~ 0V
VCOMH - VCOML ≦ 6.0V
Operate temperature range: -40℃ to 85℃
This ESP32 S3 7-inch IPS 5-point capacitive touch display with an ultra-high resolution of 1024 x 600 pixels is ideal for IoT applications. It is ideal for applications such as home automation. An integrated SD card enables recording/playback of stored data. There are also two Mabee/Grove connectors to connect various sensors to this board to create personal prototype projects in no time.
Specifications
Controller: ESP32-S3-WROOM-1, PCB antenna, 16 MB Flash, 8 MB PSRAM, ESP32-S3-WROOM-1-N16R8
Wireless: Wifi & Bluetooth 5.0
LCD: 7-inch High Lightness IPS
FPS: >30
Resolution: 1024 x 600
LCD interface: RGB 565
Touch panel: Capacitive 5-point touch
Touch panel driver: GT911
USB: Dual USB-C (one for USB-to-UART and one for native USB)
UART to UART chip: CP2104
Power supply: USB-C 5.0 V (4.0 V~5.25 V)
Button: Flash button and reset button
Mabee interface: 1x I²C, 1x GPIO
MicroSD: Yes
Arduino support: Yes
Type-C Power Delivery: Not supported
Operation temperature: −40 to +85°C
Downloads
Wiki
GitHub
ESP32-S3 Datasheet
Screen touch coordinates calibration
The PeakTech 1094 two-pole voltage tester is a reliable and practical tool for measuring voltages up to 400 V. It uses LED indicators to display voltage levels at 12 V, 24 V, 50 V, 120 V, 240 V, and 400 V. The device supports both AC and DC voltage measurements and automatically detects and displays polarity when measuring DC voltages – no manual switching between AC and DC is required.
This tester operates without batteries, ensuring it is always ready for use, even after extended periods of inactivity. With its IP54 protection rating, the PeakTech 1094 is robust and resistant to dust and splashing water, making it suitable for use in both indoor and outdoor environments.
Specifications
DC Voltage (max.)
400 V
AC Voltage (max.)
400 V
Over voltage category
CAT III 400 V
Accuracy
-30% to 0% of the measured value
Voltage test
Automatically
Polarity check
Entire measuring range
Range selection
Automatically
Response time
<0.1s
AC Voltage frequency range
50/60 Hz
Dimensions
223 x 40 x 32 mm
Weight
95 g
Downloads
Manual
The ESP32-S3 Parallel TFT not only offers more SRAM and ROM (compared to the S2 version), but with Bluetooth 5.0 it is also suitable for applications such as local monitoring and controlling.
The built-in LCD driver ILI9488 uses 16-bit parallel lines to communicate with ESP32-S3, the main clock can be up to 20 MHz, which makes the display smooth enough for video displays. With this display, you can create more IoT display projects.
Features
Controller: ESP32-S3-WROOM-1, PCB Antenna, 16 MB Flash, 2 MB PSRAM, ESP32-S3-WROOM-1-N16R2
Wireless: Wifi & Bluetooth 5.0
LCD: 3.5-inch TFT LCD
Resolution: 480x320
Color: RGB
LCD Interface: 16-bit parallel
LCD Driver: ILI9488
Touch Panel: Capacitive
Touch Panel Driver: FT6236
USB: Dual USB Type-C (one for USB-to-UART and one for native USB)
UART to UART Chip: CP2104
Power Supply: USB Type-C 5.0 V (4.0 V~5.25 V)
Button: Flash button and reset button
Mabee Interface: 1x I²C, 1x GPIO
Backlight Controller: Yes
MicroSD: Yes
Arduino support: Yes
Type-C Power Delivery: Not supported
Operation temperature: -40℃ to +85℃
Dimension: 66 x 84.3 x 12 mm
Weight: 52 g
Downloads
ESP32-S3 Datasheet
GitHub
Wiki
LVGL Demo Code
The PeakTech 6193 is a linear regulated 2-channel laboratory power supply with 0-30 V/0-5 A DC output. Its integrated safety transformer ensures reliable operation and high safety standards for lab and workshop use.
Key features include current preselection for safe setup, four-digit blue LED displays for voltage, current, and power, and an Output On/Off button to prevent accidental changes. The temperature-controlled fan provides efficient and quiet cooling.
With four precision potentiometers, output values can be adjusted quickly and accurately. A USB interface enables remote control and data readout via PC, making it ideal for versatile and automated applications.
Features
Two outputs adjustable from 0-30 V and 0-5 A DC
Fixed voltage output 5 V/1 A DC
With USB interface and PC software
4-digit segment displays for current and voltage
Channels can be used independently, in series or in parallel
Overload protection and short-circuit proof
Temperature-controlled fan
High load stability and low residual ripple
Sturdy metal housing with carrying handle
Output of safety extra-low voltage (SELV)
Specifications
Channels
2
Display Type
Segment
Output Voltage
0-30 V DC
Output Current
0-5 A
Input voltage
115-230 VAC 50/60 Hz
Auxillary output
5 V DC
Cooling
Active
Included
1x PeakTech 6193 DC Power Supply
1x Power cable
1x USB cable
1x CD-ROM
1x Manual
Downloads
Datasheet
Software
Interface Protocol
The PeakTech 6192 is a linear regulated, dual-channel laboratory power supply that delivers reliable performance and enhanced safety, thanks to its integrated safety transformer. With adjustable outputs ranging from 0-60 V and 0-2.5 A DC, it is versatile and well-suited for various laboratory and workshop applications.
It features a current preselection function, allowing users to set the desired current before connecting the load. The four-digit blue LED displays clearly and precisely show voltage, current, and power values. The output button ensures that output is only activated after settings have been configured, preventing unintentional changes and increasing operational safety.
A temperature-controlled fan automatically responds to the device's internal temperature, providing efficient cooling and quiet operation. The unit is equipped with four potentiometers for quick and precise adjustment of current and voltage values. Additionally, a USB interface enables remote control and data readout via PC.
Features
Two outputs adjustable from 0-60 V and 0-2.5 A DC
Fixed voltage output 5 V/1 A DC
With USB interface and PC software
4-digit segment displays for current and voltage
Channels can be used independently, in series or in parallel
Overload protection and short-circuit proof
Temperature-controlled fan
High load stability and low residual ripple
Sturdy metal housing with carrying handle
Output of safety extra-low voltage (SELV)
Safety: EN-61010-1, EN 61558-2-6
Specifications
Adjustable DC Output voltage
2x 20...60 V
Rechargeable DC Output current
2x 0...2.5 A
Fixed value output
5 V/1 A
USB interface
Yes
Input voltage
104~127 V AC (60 Hz) or207~253 V AC (50 Hz) switchable
Grid stability (at 0-100% load)
CV ≤0.01% + 3 mVCC ≤0.2% + 3 mA
Load stability (at 0-100% load)
CV ≤0.05% + 5 mVCC ≤0.5% + 5 mA
Ripple (at 100% load)
CV ≤1 mVrmsCC ≤3 mArms
Overload protection
Constant current limiter circuit and short-circuit proof
Accuracy of the voltage display
±0.5% + 5 digits
Accuracy of the current display
±0.5% + 5 digits
Operating temperature
0°C ... +40°C (<90% RH)
Dimensions (W x H x D)
255 x 160 x 335 mm
Weight
approx. 9 kg
Included
1x PeakTech 6192 DC Power Supply
1x Power cable
1x USB cable
1x CD-ROM
1x Manual
Downloads
Datasheet
Interface protocol
Software
This is a simple DIY kit using Makerfabs' ESP32-S3 3.5" Parallel TFT with Touch (320x480) and Mabee MLX90640 module to monitor the temperature and display on the screen or save to SD card. It is a nice tool for circuit testing and non-contact temperature sensing.
Features
Based on ESP32-S3, 3.5-inch TFT with capacitive touch
Auto check the highest temperature point
Temperature accuracy: <1°C
Suitable for applications such as human temperature checking or electronic boards debugging
All hardware & software are open, users can modify & add more functions, such WiFi/Bluetooth data transmitting
Downloads
Default firmware
New remote monitoring firmware
Blog
This ESP32 terminal is a microcontroller based on the ESP32 master. It adopts Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240 Mhz, supports 2.4 GHz Wi-Fi and Bluetooth 5 (LE), and can easily handle common edge terminal device application scenarios, such as industrial control, agricultural production environment detection and processing, intelligent logistics monitoring, smart home scenarios and more.
The ESP32 module also has a 3.5-inch parallel RGB interface capacitive touch screen with a resolution of 320x480 to ensure perfect image output at a frame rate 60 FPS. The 4 Crowtail interfaces on the back of this terminal can be used with Crowtail series sensors, plug and play, and create more interesting projects quickly and conveniently. In addition, it is also equipped with an SD card slot for extended storage (SPI leads) and a buzzer function.
The ESP32 touchscreen supports ESP-IDF and Arduino IDE development and is compatible with Python/MicroPython/Arduino. It also supports LVGL, which is the most popular free and open-source embedded graphics library to create beautiful UIs for any MCU, MPU, and display type. Now it has also obtained the official certification of LVGL. LVGL's board certificate shows that the boards can be easily used with LVGL and has decent performance for UI applications. The onboard charging circuit and lithium battery interface can use the type-C power supply interface to supply power and charge the battery at the same time, providing more outdoor scene expansion possibilities.
Features
Integrated ESP32-S3 module, which is support 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
LCD 3.5 inches parallel TFT-LCD with 320x480 resolution
Compatible with Arduino/Python/MicrmoPython
Mature software support, support ESP-IDF and Arduino IDE development
Support open-source Graphics Library-LVGL
Support 1T1R mode, data rate up to 150 Mbps, Wireless Multimedia (WMM)
Perfect security mechanism, support AES-128/256, Hash, RSA, HMAC, digital signatures and secure boot
Onboard charging chip and interface, use type-C interface to charge
With 4 Crowtail interfaces (HY2.0-4P connector), plug and play with various Crowtail sensor
Applications
Smart Home
Industrial Control
Medical Monitor
Home Appliance Display
Logistics Monitoring
Specifications
ESP32-S3 module with 16 MB Flash and 8 MB PSRAM
Wi-Fi Protocol: 802.11b/g/n (802.11n up to 150 Mbps) Wi-Fi Frequency Range: 2.402-2.483 Ghz
Support Bluetooth 5
With 4 Crowtail interfaces (HY2.0-4P connector) and onboard Micro TF card slot
3.5-inch TFT LCD RGB true color LCD screen with 320x480 resolution
Driver chip: ILI9488 (16-bit parallel line)
Capacitive touch panel controller IC FT6236 series
Operating Voltage: DC 5 V-500 mA
Sleep current:
USB power supply: 6.86 mA
Lithium battery power supply: 3.23 mA
LiPo Battery Interface: PH2.0
Operating temperature: -10°C ~ 65°C
Active Area: 73.63 x 49.79 mm (L x W)
Dimensions: 106 x 66 x 13 mm (L x W x H)
Included
1x 3.5-inch ESP RGB Display with Acrylic Shell
1x USB-C Cable
Downloads
Wiki
Schematic Diagram
16 learning Lessons for LVGL
Source code
Lesson code
LVGL Reference
ESP32-S3 Datasheet
ILI9488 Datasheet
Capacitive Touch Display Data
SD card quality is crucial for a good Raspberry Pi experience. Raspberry Pi's A2 microSD cards support higher bus speeds and command queuing, improving random read performance and narrowing the gap with NVMe SSDs. These cards are rigorously tested for optimal performance with Raspberry Pi models.
Features
Capacity: 32 GB
Support for DDR50 and SDR104 bus speeds and command queueing (CQ) extension
Speed Class: C10, U3, V30, A2
Random 4 KB read performance: 3,200 IOPS (Raspberry Pi 4, DDR50) 5,000 IOPS (Raspberry Pi 5, SDR104)
Random 4 K write performance: 1,200 IOPS (Raspberry Pi 4, DDR50) 2,000 IOPS (Raspberry Pi 5, SDR104)
Shock-proof, X-ray–proof, and magnet-proof
microSDHC/microSDXC formats
Downloads
Datasheets
