FNIRSI DSO-TC4 (3-in-1) Oscilloscope (10 MHz) + Transistor Tester + Signal Generator

Description

The FNIRDSI DSO-TC4 is a multifunctional transistor oscilloscope that is both comprehensive and practical. It is designed for use in maintenance and R&D applications, integrating an oscilloscope, transistor tester, and signal generator into a single device.

Features

  • Equipped with a 2.8-inch TFT color screen for a clear and intuitive display
  • Built-in high-capacity rechargeable lithium battery (1500 mAh) with a standby time of up to 4 hours
  • Compact and lightweight, ideal for mobile use

Specifications

Oscilloscope
Analog Bandwidth 10 MHz
Real-Time Sampling Rate 48 MSa/s
Input Impedance 1 MΩ
Coupling Mode AC/DC
Test Voltage Range 1:1 Probe: 80 Vpp (+40 V)
10:1 Probe: 800 Vpp (+400 V)
Vertical Sensitivity 10 mV/div~10 V/div (X1 range)
Vertical Displacement Adjustable with indication
Time Base Range 50ns~20s
Trigger Mode Auto/Normal/Single
Trigger Type Rising edge, Falling edge
Trigger Level Adjustable with indication
Waveform Freeze Yes (HOLD function)
Automatic Measurement Max, Min, Avg, RMS, Vpp, Frequency, Cycle, Duty Cycle
Component Tester
Transistor Amplification factor "hfe"; Base-Emitter voltage "Ube", Ic/Ie, Collector-Emitter reverse leakage current "Iceo", Ices, Forward voltage drop of protection diode "Uf"
Diode Forward voltage drop <5 V (Forward voltage drop, Junction capacitance, Reverse leakage current)
Zener Diode 0.01~32 V
Reverse Breakdown Voltage (K-A-A Test Area)
Field-Effect Transistor (FET) JFET: Gate capacitance "Cg", Drain current Id under "Vgs", Forward voltage drop of protection diode "Uf"
IGBT: Drain current Id under Vgs, Forward voltage drop of protection diode Uf
MIOSTET: Threshold voltage "Vt", Gate capacitance "Cg", Drain-Source resistance "Rds", Forward voltage drop of protection diode "Uf"
Unidirectional SCR Trigger voltage <5V, Gate level (Gate voltage)
Bidirectional SCR Trigger current <6mA (Gate voltage)
Capacitor 25pF~100mF, Capacitance value, Loss factor "Vloss"
Resistor 0.01Ω~50MΩ
Inductor 10μH~1000μH, DC resistance
DS18B20 Temperature sensor, Pins: GND, DQ, VDD
DHT11 Temperature and humidity sensor, Pins: VDD, DATA, GND
Signal Generator
Output Waveform Supports 13 waveform outputs
Waveform Frequency 0-50 KHz
Square Wave Duty Cycle 0-100%
Waveform Amplitude 0.1-3.0 V
General
Display 2.8-inch TFT color screen
Backlight Brightness adjustable
Power Supply USB-C (5 V/1 A)
Battery 3.7 V/1500 mAh
Languages English, German, Spanish, Portuguese, Russian, Chinese, Japanese, Korean
Dimensions 90 x 142 x 27.5 mm
Weight 186 g

Included

  • 1x FNIRSI DSO-TC4 (3-in-1) Oscilloscope (10 MHz)
  • 1x P6100 Oscilloscope probes (10X)
  • 1x Alligator clip probe
  • 3x Test hooks
  • 1x Adapter
  • 1x USB-C charging cable
  • 1x Manual

Downloads

Product form

The FNIRDSI DSO-TC4 is a multifunctional transistor oscilloscope that is both comprehensive and practical. It is designed for use in... Read more

€ 89,95€ 74,95 incl. VAT
Members identical

    • Ship today? Order within May 21, 2025 16:00:00 +0200

    Details

    SKU: 21146
    EAN: 021146

    Description

    The FNIRDSI DSO-TC4 is a multifunctional transistor oscilloscope that is both comprehensive and practical. It is designed for use in maintenance and R&D applications, integrating an oscilloscope, transistor tester, and signal generator into a single device.

    Features

    • Equipped with a 2.8-inch TFT color screen for a clear and intuitive display
    • Built-in high-capacity rechargeable lithium battery (1500 mAh) with a standby time of up to 4 hours
    • Compact and lightweight, ideal for mobile use

    Specifications

    Oscilloscope
    Analog Bandwidth 10 MHz
    Real-Time Sampling Rate 48 MSa/s
    Input Impedance 1 MΩ
    Coupling Mode AC/DC
    Test Voltage Range 1:1 Probe: 80 Vpp (+40 V)
    10:1 Probe: 800 Vpp (+400 V)
    Vertical Sensitivity 10 mV/div~10 V/div (X1 range)
    Vertical Displacement Adjustable with indication
    Time Base Range 50ns~20s
    Trigger Mode Auto/Normal/Single
    Trigger Type Rising edge, Falling edge
    Trigger Level Adjustable with indication
    Waveform Freeze Yes (HOLD function)
    Automatic Measurement Max, Min, Avg, RMS, Vpp, Frequency, Cycle, Duty Cycle
    Component Tester
    Transistor Amplification factor "hfe"; Base-Emitter voltage "Ube", Ic/Ie, Collector-Emitter reverse leakage current "Iceo", Ices, Forward voltage drop of protection diode "Uf"
    Diode Forward voltage drop <5 V (Forward voltage drop, Junction capacitance, Reverse leakage current)
    Zener Diode 0.01~32 V
    Reverse Breakdown Voltage (K-A-A Test Area)
    Field-Effect Transistor (FET) JFET: Gate capacitance "Cg", Drain current Id under "Vgs", Forward voltage drop of protection diode "Uf"
    IGBT: Drain current Id under Vgs, Forward voltage drop of protection diode Uf
    MIOSTET: Threshold voltage "Vt", Gate capacitance "Cg", Drain-Source resistance "Rds", Forward voltage drop of protection diode "Uf"
    Unidirectional SCR Trigger voltage <5V, Gate level (Gate voltage)
    Bidirectional SCR Trigger current <6mA (Gate voltage)
    Capacitor 25pF~100mF, Capacitance value, Loss factor "Vloss"
    Resistor 0.01Ω~50MΩ
    Inductor 10μH~1000μH, DC resistance
    DS18B20 Temperature sensor, Pins: GND, DQ, VDD
    DHT11 Temperature and humidity sensor, Pins: VDD, DATA, GND
    Signal Generator
    Output Waveform Supports 13 waveform outputs
    Waveform Frequency 0-50 KHz
    Square Wave Duty Cycle 0-100%
    Waveform Amplitude 0.1-3.0 V
    General
    Display 2.8-inch TFT color screen
    Backlight Brightness adjustable
    Power Supply USB-C (5 V/1 A)
    Battery 3.7 V/1500 mAh
    Languages English, German, Spanish, Portuguese, Russian, Chinese, Japanese, Korean
    Dimensions 90 x 142 x 27.5 mm
    Weight 186 g

    Included

    • 1x FNIRSI DSO-TC4 (3-in-1) Oscilloscope (10 MHz)
    • 1x P6100 Oscilloscope probes (10X)
    • 1x Alligator clip probe
    • 3x Test hooks
    • 1x Adapter
    • 1x USB-C charging cable
    • 1x Manual

    Downloads

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    G
    G.F. H.
    FNIRSI DSO-TC4

    Der Teil Oszillograf und der Teil Signalgenerator funktionieren ganz einwand-frei,, aber bei der Spannungsmessung werden nur positive Spannungen angezeigt - bei negativen Spannungen bleibt die Anzeige auf 0,00. Soll das so sein?
    In der Beschreibung wierden als IR- Empfangsdiode die 11 Löchers ( Ziffer 7 ) auf der Vorderseite angeboten - aber dort befindet sich der Signalsummer.
    Bei nahezu baugleichen Geräten im Internet wird als Empfangsstelle für IR-Signale das kleine Loch auf der rechten Seite neben dem USB-Anschluß empfohlen.
    Aber auch dort kam keine Anzeige, obwohl die TV-Fernbedienung einwandfrei funktioniert und bei einem ähnlichen Gerätt die Daten richtig anzeigt. werden.
    Mit besten Grüßen
    Elektronikservice
    G. F. Hering

    Login

    Forgot password?

    Don't have an account yet?
    Create an account