Bundle: Getting Started with ESPHome + LILYGO T-Display ESP32 (16 MB)

Description

About the book

Espressif's ESP8266 and ESP32 microcontrollers have brought DIY home automation to the masses. However, not everyone is fluent in programming these microcontrollers with Espressif's C/C++ SDK, the Arduino core, or MicroPython. This is where ESPHome comes into its own: with this project, you don’t program your microcontroller but configure it.

This book demonstrates how to create your own home automation devices with ESPHome on an ESP32 microcontroller board. You’ll learn how to combine all kinds of electronic components and automate complex behaviours. Your devices can work completely autonomously, and connect over Wi-Fi to your home automation gateways such as Home Assistant or MQTT broker.

By the end of this book, you will be able to create your own custom home automation devices the way you want. Thanks to ESPHome and the ESP32, this is within everyone’s grasp.

  • Set up an ESPHome development environment and create maintainable configurations
  • Use buttons and LEDs
  • Sound a buzzer and play melodies
  • Read measurements from various types of sensors
  • Communicate over a short distance with NFC, infrared light, and Bluetooth Low Energy
  • Show information on various types of displays

About the board

Chipset Espressif-ESP32 240 MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
FLASH QSPI flash 16 MB
SRAM 520 kB SRAM
Button Reset
USB to TTL CP2104
Modular interface UART, SPI, SDIO, I²C, LED PWM, TV PWM, I²S, IRGPIO, ADC, capacitor touch sensor, DACLNA pre-amplifier
Display IPS ST7789V 1.14 Inch
Working voltage 2.7-4.2 V
Working current About 67 MA
Sleep current About 350 uA
Working temperature range -40℃ ~ +85℃
Size & Weight 51.52 x 25.04 x 8.54 mm (7.81 g)
Power Supply USB 5 V/1 A
Charging current 500 mA
Battery 3.7 V lithium battery
JST Connector 2-Pin 1.25 mm
USB Connector USB-C
Product form

About the book Espressif's ESP8266 and ESP32 microcontrollers have brought DIY home automation to the masses. However, not everyone is... Read more

€ 54,95€ 39,95 incl. VAT
Members identical

      Details

      SKU: 19896
      EAN: 019896
      Language: English
      Pages: 156 (Full Color)
      Format: 17 x 23.5 cm (Paperback)

      Description

      About the book

      Espressif's ESP8266 and ESP32 microcontrollers have brought DIY home automation to the masses. However, not everyone is fluent in programming these microcontrollers with Espressif's C/C++ SDK, the Arduino core, or MicroPython. This is where ESPHome comes into its own: with this project, you don’t program your microcontroller but configure it.

      This book demonstrates how to create your own home automation devices with ESPHome on an ESP32 microcontroller board. You’ll learn how to combine all kinds of electronic components and automate complex behaviours. Your devices can work completely autonomously, and connect over Wi-Fi to your home automation gateways such as Home Assistant or MQTT broker.

      By the end of this book, you will be able to create your own custom home automation devices the way you want. Thanks to ESPHome and the ESP32, this is within everyone’s grasp.

      • Set up an ESPHome development environment and create maintainable configurations
      • Use buttons and LEDs
      • Sound a buzzer and play melodies
      • Read measurements from various types of sensors
      • Communicate over a short distance with NFC, infrared light, and Bluetooth Low Energy
      • Show information on various types of displays

      About the board

      Chipset Espressif-ESP32 240 MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
      FLASH QSPI flash 16 MB
      SRAM 520 kB SRAM
      Button Reset
      USB to TTL CP2104
      Modular interface UART, SPI, SDIO, I²C, LED PWM, TV PWM, I²S, IRGPIO, ADC, capacitor touch sensor, DACLNA pre-amplifier
      Display IPS ST7789V 1.14 Inch
      Working voltage 2.7-4.2 V
      Working current About 67 MA
      Sleep current About 350 uA
      Working temperature range -40℃ ~ +85℃
      Size & Weight 51.52 x 25.04 x 8.54 mm (7.81 g)
      Power Supply USB 5 V/1 A
      Charging current 500 mA
      Battery 3.7 V lithium battery
      JST Connector 2-Pin 1.25 mm
      USB Connector USB-C

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      Recently viewed products

      Login

      Forgot password?

      Don't have an account yet?
      Create an account