The PeakTech 6193 is a linear regulated 2-channel laboratory power supply with 0-30 V/0-5 A DC output. Its integrated safety transformer ensures reliable operation and high safety standards for lab and workshop use.
Key features include current preselection for safe setup, four-digit blue LED displays for voltage, current, and power, and an Output On/Off button to prevent accidental changes. The temperature-controlled fan provides efficient and quiet cooling.
With four precision potentiometers, output values can be adjusted quickly and accurately. A USB interface enables remote control and data readout via PC, making it ideal for versatile and automated applications.
Features
Two outputs adjustable from 0-30 V and 0-5 A DC
Fixed voltage output 5 V/1 A DC
With USB interface and PC software
4-digit segment displays for current and voltage
Channels can be used independently, in series or in parallel
Overload protection and short-circuit proof
Temperature-controlled fan
High load stability and low residual ripple
Sturdy metal housing with carrying handle
Output of safety extra-low voltage (SELV)
Specifications
Channels
2
Display Type
Segment
Output Voltage
0-30 V DC
Output Current
0-5 A
Input voltage
115-230 VAC 50/60 Hz
Auxillary output
5 V DC
Cooling
Active
Included
1x PeakTech 6193 DC Power Supply
1x Power cable
1x USB cable
1x CD-ROM
1x Manual
Downloads
Datasheet
Software
Interface Protocol
The PeakTech 6192 is a linear regulated, dual-channel laboratory power supply that delivers reliable performance and enhanced safety, thanks to its integrated safety transformer. With adjustable outputs ranging from 0-60 V and 0-2.5 A DC, it is versatile and well-suited for various laboratory and workshop applications.
It features a current preselection function, allowing users to set the desired current before connecting the load. The four-digit blue LED displays clearly and precisely show voltage, current, and power values. The output button ensures that output is only activated after settings have been configured, preventing unintentional changes and increasing operational safety.
A temperature-controlled fan automatically responds to the device's internal temperature, providing efficient cooling and quiet operation. The unit is equipped with four potentiometers for quick and precise adjustment of current and voltage values. Additionally, a USB interface enables remote control and data readout via PC.
Features
Two outputs adjustable from 0-60 V and 0-2.5 A DC
Fixed voltage output 5 V/1 A DC
With USB interface and PC software
4-digit segment displays for current and voltage
Channels can be used independently, in series or in parallel
Overload protection and short-circuit proof
Temperature-controlled fan
High load stability and low residual ripple
Sturdy metal housing with carrying handle
Output of safety extra-low voltage (SELV)
Safety: EN-61010-1, EN 61558-2-6
Specifications
Adjustable DC Output voltage
2x 20...60 V
Rechargeable DC Output current
2x 0...2.5 A
Fixed value output
5 V/1 A
USB interface
Yes
Input voltage
104~127 V AC (60 Hz) or207~253 V AC (50 Hz) switchable
Grid stability (at 0-100% load)
CV ≤0.01% + 3 mVCC ≤0.2% + 3 mA
Load stability (at 0-100% load)
CV ≤0.05% + 5 mVCC ≤0.5% + 5 mA
Ripple (at 100% load)
CV ≤1 mVrmsCC ≤3 mArms
Overload protection
Constant current limiter circuit and short-circuit proof
Accuracy of the voltage display
±0.5% + 5 digits
Accuracy of the current display
±0.5% + 5 digits
Operating temperature
0°C ... +40°C (<90% RH)
Dimensions (W x H x D)
255 x 160 x 335 mm
Weight
approx. 9 kg
Included
1x PeakTech 6192 DC Power Supply
1x Power cable
1x USB cable
1x CD-ROM
1x Manual
Downloads
Datasheet
Interface protocol
Software
The PeakTech 1094 two-pole voltage tester is a reliable and practical tool for measuring voltages up to 400 V. It uses LED indicators to display voltage levels at 12 V, 24 V, 50 V, 120 V, 240 V, and 400 V. The device supports both AC and DC voltage measurements and automatically detects and displays polarity when measuring DC voltages – no manual switching between AC and DC is required.
This tester operates without batteries, ensuring it is always ready for use, even after extended periods of inactivity. With its IP54 protection rating, the PeakTech 1094 is robust and resistant to dust and splashing water, making it suitable for use in both indoor and outdoor environments.
Specifications
DC Voltage (max.)
400 V
AC Voltage (max.)
400 V
Over voltage category
CAT III 400 V
Accuracy
-30% to 0% of the measured value
Voltage test
Automatically
Polarity check
Entire measuring range
Range selection
Automatically
Response time
<0.1s
AC Voltage frequency range
50/60 Hz
Dimensions
223 x 40 x 32 mm
Weight
95 g
Downloads
Manual
This laboratory power supply offers a controllable 0...60 V or 0...6 A DC main output with a maximum continuous power of 150 W. For developers, this laboratory power supply offers two switchable USB outputs with their own LCD display with voltage and current values.If you use a load up to 2.5 A, you can set the output voltage up to 60 V. If you want to use a higher current up to 6 A, set the load to a maximum of 25 V. Of course, all stages are also adjustable in between, e.g. 30 V/5 A, 40 V/3.7 A or 50 V/3 A.The current and voltage setting also can be done when the output is switched off. By pressing the knob for current or voltage, the setting resolution can be fine/coarse switched from 1 mA to 100 mA or 10 mV to 1 V.Due to the high range of functions and the simple operation with the best price-performance ratio, this laboratory power supply is ideal for the education, hobby, development and service sector.
Blue LCD display showing the output voltage and current values
Green LCD display showing the USB output voltage and current values
150 W constant output power
Adjustable voltage range: 0~60 V at 0~2.5 A and 0~25 V at 2.5~6 A
Voltage and current pre-selection with switchable output
C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load
Protection against short circuit, overload and overtemperature
Accessories: Power cable, Connection Leads and Manual
Output Voltage
0 ~ 60 V DC (@2,5 A)
Output Current
0 ~ 6 A DC (@ 25 V)
Output Power
150 W
Display Resolution (V)
10 mV
Display Resolution (A)
1 mA
Setting Resolution (V)
10 mV / 1 V switchable
Setting Resolution (A)
1 mA / 100 mA switchable
Ripple & noise
≤ 5 mV RMS; ≤ 20 mA RMS
Load regulation
≤ 0.05% + 5 mV, ≤ 0.5% + 5 mA
Line regulation
≤ 0.1% + 3 mV, ≤ 0.2% + 3 mA
Display accuracy
+/- 0,5% + 5 dgt.
Protection
Overload, overtemperature, short circuit
Operating voltage
115 / 240 V AC; 50/60 Hz
Dimensions (WxHxD)
80 x 160 x 260 mm
Weight
1.6 kg
The PeakTech 1265 is an affordable 30 MHz 2-channel digital storage oscilloscope with a high-resolution TFT color display and extensive additional functions. It has a sampling rate of up to 250 MS/s and convinces with its high quality and easy handling with the best price/performance ratio. To quickly display each incoming waveform, simply press the Autoset key and the oscilloscope itself searches for the best possible display. With Autoscale, however, the scaling of the time base can be adjusted in a user-friendly manner. This oscilloscope has a VGA output for displaying the oscilloscope display on an external monitor or projector.
Features
2-channel oscilloscope with 30 MHz analog bandwidth at max. 250 MS/s sampling rate
8 inch (20 cm) TFT color display with 800 x 600 pixels
LAN, USB host, USB device & VGA interface
Autoset function for user-friendly operation
Recording length of max. 10,000 points
Automatic measurement modes, XY mode and FFT function
Specifications
Bandwidth
30 MHz
Channels
2
Screen size (TFT)
8' (20 cm)
Resolution
800 x 600 Pixel
Display Type
Color-TFT
Sampling 1 CH
250 MS/s
Sampling 2 CH
125 MS/s
Hor. scale max.
100 s/div
Hor. scale min.
5 ns/div
Memory depth
10,000 Points
Rise Time
< 14 ns
Vert. resolution
8 Bit
Vert. scale max.
10 V/div
Vert. scale min.
2 mV/div
Interfaces
1x USB, 1x LAN, 1x VGA
Mains voltage
110/240 V AC; 50/60 Hz
Included
PeakTech 1265 Oscilloscope
USB cable
Software CD for Windows
Power cord
2 probes
BNC cable
Carrying case
Manual
Downloads
Software
Datasheet_DE-EN
Datasheet_FR
Datasheet_IT
Datasheet_ES
DC brushed motors are the most commonly used and widely available motors in the market. The Cytron 10 Amp 5-30 V DC Motor Driver will help you add functionality to your DC motor. It supports both sign-magnitude PWM signal and locked-antiphase. It is compatible with full solid-state components resulting in higher response time and eliminates the wear and tear of the mechanical relay. Features Supports motor voltage from 5 V to 30 V DC Current up to 13 A continuous and 30 A peak 3.3 V and 5 V logic level input Compatible with Arduino and Raspberry Pi Speed control PWM frequency up to 20 kHz Fully NMOS H-Bridge for better efficiency No heat sink is required Bi-directional control for one Brushed DC motor Regenerative Braking Downloads User Manual Arduino Library
The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions.
As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness.
In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.
Through these many technical qualities, this device is suitable for the outdoor use of every electrician, technician and engineer in the service, construction or industrial sector.
Features
Automatic illuminated functions keys and rotary switch
Integrated powerful LED Flashlight
Bleutooth 4.0 interface for data transfer to Android or iOS smartphones
TrueRMS measurement
ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z)
3 5/6-digits measurement value display (max. 5999)
LCD-Display with Relative-value measurement and 42-segment bargraph
Continuity with buzzer and diode-test
Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %)
Heavy Duty Case, IP67 dust- and waterproof
Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
Accessories: Carrying case, Test Leads, K-type
Specifications
DCV
600 mV / 6 / 60 / 600 / 1000 V +/-0,8% + 5 dgt.
ACV + DCV @ 10 MΩ
6 / 60 / 600 / 1000 V +/-1,5% + 20 dgt.
ACV + DCV @ 3 kΩ (LO Z)
6 / 60 / 600 / 1000 V +/-3% + 30 dgt.
ACV + DCV Frequency range
50 Hz … 400 Hz
ACV
6 / 60 / 600 / 1000 V +/-1% + 5 dgt.
ACV Frequency range
50 Hz … 1000 Hz
DCA
600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt.
ACA
600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt.
ACA Frequency range
50 Hz … 400 Hz
Ohm
600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,5% + 5 dgt.
Capacitance
60 / 600 nF / 6 / 60 / 600 / 6000 µF +/-3% + 5 dgt.
Frequency
10 Hz … 10 kHz +/- 1,0% + 5 dgt.
Temperature
20.0 °C … +760 °C +/-1,0% + 5 °C
Interface
Bluetooth 4.0 Low Energy
Operating Voltage
4 x 1,5 V AAA Batteries
Dimensions (WxHxD)
75 x 170 x 50 mm
Weight
400 g
The PeakTech 3350 was specially developed for use in the craftsmanship and industry and offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight, which is used to illuminate the area where the measurement has to be taken. A multi-colored LED bar is located above the 6000-digit display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is found in NCV mode, yellow when measuring large capacities or flashes red when the phase tester mode is active (LIVE).
The PeakTech 3350 was manufactured according to the latest development aspects and has a double-insulated injection-molded housing with rubber coating, a tilt stand on the back, which can be removed to replace the batteries. The fuses are located underneath the stand as well, if it is neccessary to replace these. With this device the measuring range is selected automatically, which enable particularly fast response times.
Features
True RMS voltage up to 600 V and current up to 10 A AC/DC
6,000 LCD display with automatic backlight
Multi-colored warning LED for various measuring functions
Automatic range selection
Manual range selection possible using selection buttons
Integrated LED flashlight for lighting the area where the measurement has to be taken
Auto off and battery status display
Safety: EN 61010-1; CAT III 600 V
Accessories: bag, test leads, temperature sensor, temperature adapter, batteries and user manual
Specifications
Basic Accuracy DC
±0.5%
Battery
1.5 V AAA
Capacitance max.
60 mF
Digital counts
6000
Display Type
LCD
Info LEDs
■
LED lamp
■
NCV
■
Over voltage category
CAT III 600 V
Range selection
Auto
True RMS
■
V DC max.
600 V
A AC max.
10 A
Hz max.
10 MHz
OHM max.
60 MΩ
Temp. max.
1000°C
Temp. min.
-18°C
mA DC max.
600 mA
mV DC max.
600 mV
µA DC max.
6000 µA
V AC max.
600 V
mV AC max.
600 mV
A DC max.
10 A
mA AC max.
600 mA
µA AC max.
6000 µA
Downloads
Manual
The PeakTech 1240 is a 60 MHz 2-channel digital storage oscilloscope with a high-resolution TFT color display and extensive additional functions. It has a sampling rate of up to 500 MS/s and convinces with its high quality and easy handling with the best price/performance ratio.
Features
High-resolution TFT color display with 800 x 600 pixels and 65536 colors
USB port for real-time data transmission or reading of internal memory
Saving of measured values and graphics directly onto the USB-stick
VGA-output port for external monitor
Autoset and autoscale function for easy operation
LAN connection for remote access via network
Internal memory of 10 million points per channel or 15 waveforms
20 automatic measurement modes and FFT function
PASS/FAIL function
Safety: EN 61010-1; CAT II
Accessories: 2 pcs. BNC cable, USB cable, software CD for Windows 2000/XP/Vista/7/8/10, power cable, 2 probes, carrying case and manual
Specifications
Bandwidth
60 MHz
Display
20 cm (8”) TFT with 65536 colors
Resolution
800 x 600 Pixel
Channel
2 CH
Sampling mode
Normal/peak detect/average
Sampling rate each Channel
250 MSa/s
Input coupling
AC, DC, GND
Input impedance
1 MΩ +/- 2 % in parallel with 10 pF +/- 5 pF
Input voltage
400 V DC or ACpp
Sensitivity
2 mV - 10 V/Skt/div.
Rise time
< 5,8 ns
Accuracy
+/- 3 %
Vertical resolutions
8 Bits (2 CH simultaneously)
Horizontal scale
5ns-100s/Skt./div
Sampling range
0,5 - 250 S/s
Trigger type
Edge/Video/Pulse/Slope
Trigger mode
Auto, Normal, Single
Trigger coupling
DC, AC, LF, HF
20 automat. measurements
peak-peak, cycle RMS, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, rise time, fall time, +width, -width, +duty, -duty, delay A→B (rising), delay A→B(falling), frequency, period, min, max
Phase difference
+/- 3°
Record length
10.000.000 points/CH
Interfaces
USB Device 2.0, USB Host 2.0, VGA, LAN
Operation voltage
100~240 V ACrms / 50/60 Hz
Dimensions
340 x 155 x 70 mm
Weight
1.8 kg
You can control the motor driver with PWM and DIR inputs. The Arduino pins for these inputs are configurable via jumpers. If the specified pins on Arduino are already used up by other application/shield, you can select another pin easily with the jumper. There is also a possibility to quickly and conveniently test the functionality of the motor driver with the onboard test buttons and output LEDs. Buck regulator which produces 5 V output is also available to power the Arduino mainboard, which eliminates the need of extra power supply for the Arduino mainboard. The board also offers various protection features. Overcurrent protection prevents the motor driver from damage when the motor stalls or an oversized motor is hooked up. When the motor is trying to draw current more than what the motor driver can support, the motor current will be limited at the maximum threshold. Assisted by temperature protection, the maximum current limiting threshold is determined by the board temperature. The higher the board temperature, the lower the current limiting threshold. As a result, the motor driver delivers its full potential depending on the current conditions without damaging any MOSFETs. Features Shield for Arduino form factor Bidirectional control for two brushed DC motors Control one unipolar/bipolar stepper motor Operating Voltage: DC 7 V to 30 V Maximum Motor Current: 10 A continuous, 30 A peak Buck regulator to produce 5 V output (500 mA max) Buttons for quick testing LEDs for motor output state Selectable Arduino pins for PWM/DIR inputs. PWM/DIR inputs compatible with 1.8 V, 3.3 V and 5 V logic PWM frequency up to 20 kHz (Output frequency is same as input frequency). Overcurrent protection with active current limiting Temperature protection Undervoltage shutdown Possible applications Mobile Robot Automated Guided Vehicle (AGV) Solar Tracker Game Simulator Automation Machine
Downloads Datasheet Sample Code 3D CAD Files Packing List 1x 10Amps 7V-30V DC Motor Driver Shield for Arduino (2 Channels) MDD010
More than 200 power supply designs for home construction This USB Stick contains over 200 different power supply circuits from the volumes 2001-2022 of Elektor. The article search feature allows you to search full-text content. The results are always displayed as pre-formatted PDF documents. Highlights Cuk Converter Automatic Battery Switchover Battery Voltage LED Digital Benchtop Power Supply Lithium-Ion Charger Solar Cell Charger Electronic Fuse High Voltage Regulator Power Supply for USB Devices Step-up Converter for LEDs Battery Management and much more... On the Stick you will also find a folder with additional material such as PCB layouts, Gerber files and software.
