The SEQURE ES666 is a smart electric screwdriver designed for precision tasks such as assembling and disassembling electronics, RC models, drones, and more. It features multiple operation modes: Sensing Mode, Fixed Mode, and Automatic Mode, allowing for versatile use. The device includes an OLED display and a 600 mAh rechargeable battery providing up to 4 hours of no-load operation. Features Smart Control: Supports angle sensing control and adjustable sensitivity. It starts and stops automatically for hands-free operation, and stops automatically when the screw is fully tightened. Enhanced Visibility: Equipped with front-facing shadowless LED lights with on/off and delay modes. Robust Design: Constructed with a metal shell and anti-slip strips for a secure grip that prevents rolling. High-Quality Bits: Includes durable S2 steel bits with built-in strong magnets for fast screw assembly and disassembly. Powerful Performance: Features a metal gear reduction motor and a built-in high-capacity battery for stable, continuous use. Smart Display: Comes with a dynamic multi-functional UI interface and supports firmware upgrades. Versatile Use: Offers 7 torque settings to suit a variety of tasks – ideal for repairing, assembling, or disassembling RC models, drones, mobile phones, computers, watches, glasses, and other electronics. Specifications Manual Torque 22kgf.cm / 2.2N.m Torque Gears 7 Battery 600 mAh No-load Speed 250 rpm Working Time No-load 4h Charging USB-C 5 V Bits 4 mm Hexagon Display 128 x 32 OLED Front Lighting LED Working Modes Sensing, Fixed, Automatic Firmware Upgrades Yes Menu Languages English, Russian, and Chinese Dimensions 15 x 16 x 140 mm Weight (Screwdriver) 57 g Included 1x SEQURE ES666 Electric Screwdriver 30x Magnetic S2 steel bits 1x USB-C charging cable 1x Carrying case

Read more less

This versatile digital microscope covers a wide magnification range (18-720x, 1560-2040x, 2760-4080x, 3600-5100x, 60-240x) with 5 lenses for hobby, industrial and biologic purposes. Lens A (18-720x) can be used to observe whole coins or parts, circuit boards, plants, stones, etc. With lens B (1560-2040x), C (2760-4080x) and M (3600-5100x) you can observe biological slides. Lens L is ideal for soldering and repair work. In addition, the microscope has an endoscope for clear observation of the sides of components and inner tubes, allowing 360° viewing without blind spots. Specifications Magnification Lens A 18-720x Lens B 1560-2040x Lens C 2760-4080x Lens M 3600-5100x Lens L 60-240x Screen size 10 inch (25.7 cm) Video resolution (max.) UHD 2880x2160 (24fps) Video format MP4 Photo format JPG Photo resolution 5600x2400 (with interpolation) Frame rate Max. 120fps HDMI output Yes (only HDMI monitor displays) PC output Yes Power supply USB 5 V DC (not included) Stand material Metal Stand size 20 x 19 x 40 cm Included 1x Andonstar AD269S Digital Microscope 1x Metal stand with 2 LEDs 1x X-Y Moveable stage 1x Lens A 1x Lens set (B, C, M) 1x Lens L 1x Endoscope (+ accessories) 1x USB cable 1x HDMI cable 1x Remote control 1x Dimmer cable 3x Backdrop board 5x Biological slides 1x 32 GB microSD card 1x Observation box 1x Tweezers 1x Manual

Read more less

The powerful soldering station with LCD panel has been designed for a wide temperature range (from 150-450°C) and is ideal for general purpose soldering as well as specialized lead-free soldering applications. The soldering iron is controlled automatically by the microprocessor. With its high-quality sensor the heat exchange system guarantees precise temperature control at the soldering tip. This digital temperature controlled soldering station includes a holder and cleaning sponge. Specificaties Operating voltage 220-240 V, 50 Hz Power consumption 80 W Soldering iron power 48 W Operating voltage soldering iron 24 V Temperature (adjustable) 150-450°C Dimensions 195 x 87 x 165 mm

Read more less

This multi-purpose tool offers an excellent all round solution, ideal for holding big size PCBs and desoldering work, etc. Features The arms of the repair station can move up and down conveniently, easy for operation. The adjustable parts are made of the same material for microscope, with high quality, perfect stability and precision. The rubber feet can move in all directions, ensuring the operation platform is always on a flat surface. Suitable for desoldering BGA ICs. Specifications Rough adjusting range in height 0∼230 mm Precise adjusting range in height 0∼60 mm Max. holding size of PCB 250 mm (length or width) Min. holding size of PCB 20 mm (length or width)

Read more less

The SEQURE T55 Smart Mini Temperature Adjustable Soldering Hot Plate is a compact and efficient tool designed for precise preheating and desoldering tasks. With its adjustable temperature range from 50°C to 280°C (122°F to 536°F), it is suitable for various applications, e.g. cell phone repair, PCB assembly, etc. Features Adjustable heating temperature range: 50°C to 280°C (122°F to 536°F) Equipped with a heat-resistant ceramic temperature sensor, ensuring high-accuracy data measurement under continuous high temperatures. Automatically stops heating after reaching the preset working time. Supports PD, QC, and DC (max 25 V). Intelligent temperature control algorithm for temperature compensation and power adjustment. 128 x 32 resolution OLED display with a built-in buzzer to indicate operating status. °C/°F conversion Specifications Heating Area 55 x 55 mm Working Temperature 50-280°C (122-536°F) Max Voltage 25 V Max Power 95 W Recommend Voltage 19-25 V PD Power Supply PD 20 V ≥3A Power Supply Modes PD, QC, DC Interface USB-C Display 128 x 32 OLED Menu Languages English, Russian, and Chinese Dimensions 55 x 60 x 37 mm Weight 92 g Included 1x SEQURE T55 Smart Mini Soldering Hot Plate 1x PD 65 W Power Supply (EU) 1x Fast Charging Cable (100 W/5 A)

Read more less

The Miniware Cordless Soldering Station TS1C (with integrated OLED screen and Bluetooth) is an intelligent soldering tool that heats up to 400°C in less than 20 seconds. Thanks to the built-in battery, the wireless soldering pen sits comfortably in the hand and is easy to use. Features New high-efficiency supercapacitor energy storage technology, 10,000-level charge and discharge times Seperate design + true wireless, enjoy wireless soldering experience BLE4.2 Bluetooth communication technology to realize remote control and setting Standard PD2 20 V 45 W max power input, up to 36 W soldering power, can continuously solder more than 180 solder joints (0805) with a single full charge Control station preheating to improve heating efficiency 3 expansion slots for accessories Control Station Standard PD2 20 V 45 W max power input, over current safety protection 128x64 pixel OLED screen, display soldering pen status in real time Control station preheating, improve heating efficiency Remote control and setting: temperature regulating, menu setting, viewing device info and status, etc. Work as soldering stand and charging station 3 expansion slots for multiple expandable accessories like sponge slot Soldering Pen Built-in 750F high-efficiency energy storage supercapacitor, can be charged via control station (or via its USB Type-C interface in emergency cases) 36 W maximum heating power, can solder more than 180 solder joints (0805) continuously under a single full charge Compatible with Miniware 3.5 mm audio interface soldering tips (TS80/80P soldering tip series) Boost mode (holding the button on the pen) Included TS1C Soldering pen TS1C Control station Soldering tip (TS-B02) Silicone cable Sponge slot incl. sponge Manual

Read more less

Done printing? Let’s add some components! Just be sure to use the Voltera recommended solder wire and plenty of flux to ensure a strong solder joint. Voltera has chemically tested it to be most compatible with their ink. Alloy: Sn42 Bi57 Ag1 Dia: 1.0 mm Flux: 2% Weight: 20g Recommended Temp: < 205°C (400°F) RoHS Compliant

Read more less

STEMTera is a programmable breadboard module, compatible with Arduino Uno. It has two microcontrollers built in: ATmega328P and ATmega32U2 and the I/O (40 mA per pin) are accessible without cabling. The underside of the board (112 x 80 x 17 mm) is compatible with LEGO. Specifications Pin-to-pin compatible with Arduino Uno Mechanically compatible with LEGO blocks Two microcontrollers (41 I/O of which 9 as PWM) USB interface with ATmega32U2 using LUFA (Lightweight USB Framework for AVRs) for keyboard, joystick, MIDI, etc... Programming with the Arduino IDE (micro-USB) Reset button, 4 LEDs (including TX, RX, Power), power connector Power via micro-USB or 7...20 V DC on socket 5,5 x 2,1 mm (+ center) Multiple programming environments: Atmel Studio Arduino IDE AVR-GCC AVR-GCC with LUFA library Scratch etc. Microcontrollers ATmega328P: 14 pins of I/O including 6 PWM 6 analog inputs (10 bit ADC) I²C, SPI and serial Interrupt controller ATmega32U2: 21 pins of I/O Flash Memory: 32 KB SRAM: 2 KB EEPROM: 1 KB Clock: 16 MHz Downloads Beginner's Guide

Read more less

This desk lamp is ideal for your workplace. With the 5-inch 5D-lens, the finest work can be done. The lamp has 80 integrated LEDs. Features Lens size: 5 inch Lens material: glass Diopter: 5D Light source: T5 22 W fluorescent energy-saving bulb (80pcs LED) Standard mount: table base Voltage: 220-240 V Power: 22 W

Read more less

The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 2x SQ10 probes and pin tipped test needles (red/black) 2x Banana to dupont test wires (red/black) 1x Set of cable holders (red/black) 2x Extra test needles Downloads User guide

Read more less

The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide

Read more less

This set includes all necessary tools to start soldering, plus two festive minikits to put your skills to the test. The basic tools for soldering are a soldering iron (110 V AC version) and a support piece. We also included lead-free solder which is pretty easy to work with and its fumes are not harmful! Lastly, you’ll need some side cutters to trim the component’s leads. The first minikit is the electronic candle, it has a warm yellow LED that mimics a real candle! This little solder kit only has 6 components to solder, which makes it the ideal starter kit. Then it’s time to expand your skills with the original electronic Christmas tree kit. Solder more advanced components and a whopping 16 red LEDs. Each kit is accompanied by an illustrated and comprehensive manual to make sure that anyone can master the art of soldering. Features Soldering iron and support (230 V AC version) Lead-free solder Side cutters 2 minikits

Read more less

This tool set contains essential tools for all kinds of electronic work. Included Soldering iron Desoldering pump Precision screwdriver 2.5x75 mm Screwdriver 3x75 mm Screwdriver 5x75 mm Screwdriver 6x125 mm Long nose plier (5') Diagonal cutting plier (4.5') IC extractor Wire stripper & cutter Multimeter Hex key wrench Soldering wire Component storage box Tweezers (Long nose) Bag size: 340 x 210 x 50 mm

Read more less

The AxiDraw MiniKit 2 The AxiDraw MiniKit 2 is a special compact addition to the AxiDraw lineup. Designed for lighter-duty applications, It takes up less desk space and less storage space. It's considerably more portable, too. The AxiDraw MiniKit is also the only DIY kit model of AxiDraw that you get to assemble yourself. All other AxiDraw models ship fully assembled, tested, and ready to use.) A Mini Plotter The AxiDraw MiniKit 2 has a working area of about 6 × 4 inches (150 × 100 mm): Big enough to be useful for a wide range of applications including short notes, postcards, and addressing envelopes. It's also ideally suited for use as a signature machine, for signing checks, letters, books, or artwork. Applications The AxiDraw is an extremely versatile machine, designed to serve a wide variety of everyday and specialized drawing and writing needs. You can use it for almost any task that might normally be carried out with a handheld pen. It allows you to use your computer to produce writing that appears to be handmade, complete with the unmistakable appearance of using a real pen (as opposed to an inkjet or laser printer) to address an envelope or sign one's name. And it does so with precision approaching that of a skilled artist, and – just as importantly – using an arm that never gets tired. Specifications Performance Usable pen travel (inches): 6.3 × 4 inches Usable pen travel (millimeters): 160 × 101 mm Vertical pen travel: 0.7 inch (17 mm) Maximum XY travel speed: 10 inches (25 cm) per second Native XY resolution: 2032 steps per inch (80 steps per mm) Reproducibility (XY): Typically better than 0.005 inches (0.1 mm) at low speeds Physical Major structural components are machined, extruded, or folded aluminum, manufactured and anodized in the USA. Holds pens and other drawing instruments up to 5/8' (16 mm) diameter and 25 g weight. Overall dimensions: Approximately 14.25 × 9.25 × 4.25 inches (36 × 23.5 × 11 cm) Maximum height with cable guides: Approximately 9 inches (23 cm) Footprint: Approximately 13.5 × 1.7 inches (35 x 4.5 cm) Weight: 3.2 Lb (1.5 kg) Software Compatible with Mac, Windows, and Linux Drive directly from within Inkscape, using the AxiDraw extension Comprehensive user guide available for download Driver software software free to download and open source Internet access is required to download software Additionally, AxiDraw Merge software available at no cost to AxiDraw owners. Programming interfaces Note: Programming is not required to use the AxiDraw Stand-alone command line interface (CLI) Available AxiDraw Python API RESTful API available for full machine control, stand-alone or accessible by running RoboPaint in the background. Simplified 'GET-only' API available as well, for use in programming environments (such as Scratch, Snap) that permit only retrieval of URLs. Direct EiBotBoard (EBB) command protocol available for use in any programming environment that supports communication with USB-based serial ports. Code that generates SVG files can also be used to (indirectly) control the machine. Included All parts and materials necessary to build the AxiDraw MiniKit 2 writing and drawing machine. Multi-plug power supply with EU adapter USB cable Small Easel (Board and clips) for paper holding Tools needed Scissors or diagonal cutters Small Phillips-head screwdrivers: #0 and #1 sizes Small flat-head screwdriver: 2 mm or 5/64' blade width recommended Miniature pliers (Recommended but not required) Small hobby knife (Recommended but not required) Downloads User Guide

Read more less

If you're hand soldering components with the provided solder wire, make sure to use flux to promote solder wetting. Out of solder wire? The wire in our store has been tested for best performance with the conductive ink and standard copper.

Read more less