New Products
-
ZEEWEII DSO2512G 2-ch Oscilloscope (120 MHz) & Signal Generator
The DSO2512G dual-channel oscilloscope with advanced ARM+FPGA architecture delivers exceptional performance with a 120 MHz bandwidth and 500 MSa/s sampling rate, ensuring precision and stability for professionals and enthusiasts alike. Its versatility makes it ideal for MCU troubleshooting, vehicle repairs, appliance diagnostics, DIY electronics, power supply testing, and inverter analysis. The device also features an integrated signal generator, capable of outputting adjustable waveforms with a 2.5 V amplitude, a frequency range of 0-10 MHz (or 0-2 MHz), and an accuracy of 0.1 Hz. Features 120 MHz bandwidth 500 MSa/s sampling rate 10 MHz signal generator 2.8" display XY mode Video output Single trigger 10 mV sensitivity FFT spectrum Specifications Channels 2 Bandwidth 120 MHz Sampling rate 500 MSa/s Display 2.8" color TFT (320 x 240) Measurements 14 types Vertical precision ±2% Rise time <3ns Storage depth 128 Kb Impedance 1 MΩ Time base 5ns-10s Vertical sensitivity 10 mV/div-10 V/div Max voltage ±40 V (x1)±400 V (x10) Trigger mode Auto/Normal/Single Trigger type Rise/Fall Trigger level Manual/Auto Display mode YT/Roll Persistence None/1s/∞ Waveforms Sinus/Square/Triangle/Noise Frequency 0-10 MHz (sin)0-2 MHz (other) Power supply USB-C (5 V) Battery 4000 mAh Lithium battery Dimensions 137 x 82 x 38 mm Weight 286 g Included 1x DSO2512G Oscilloscope 2x P6100 probes 1x Video cable 1x USB cable 1x Ring-shaped Stand 1x Storage bag 1x Manual Downloads Manual
-
FNIRSI FNIRSI LCR-P1 Multi-Function Transistor Tester
The LCR-P1 transistor tester is a high-precision, multi-functional electronic tester specifically designed for electronics engineers, technicians and enthusiasts to determine and analyze the performance and characteristics of semiconductor components such as transistors, diodes, triodes and field-effect transistors (FETs). Equipped with a 1.44-inch color screen, it enables multi-parameter measurement of various components, automatically identifies the type and pin arrangement of the tested component, simplifies the operation process and improves test efficiency. Specifications Transistor range 10 < β < 600 Capacitance Range 25 pF-100 mF Inductance range 10 μH-1000 μH Resistance Range 0.01 Ω-50 MΩ Diode Forward voltage drop <4.5 V Voltage Regulator Diode 0.01-4.5 V0.01-32 V Field-Effect Transistor JFET / IGBT / MOSFET Bidirectional Thyristor Turn-on voltage <5 VGate trigger current <6 mA IR Decoding NEC protocol IR code Display 1.44" Color Screen Power Supply 300 mAh lithium battery Battery 0.1-4.5 V Charging USB-C (5 V/1 A) Operating Temperature 0~40°C Dimensions 71 x 87 x 28 mm Included 1x FNIRSI LCR-P1 Transistor Tester 1x Replaceable test board 3x Test hooks 1x USB cable 1x Manual Downloads Manual Firmware V1.0.9
-
Waveshare Waveshare ESP32-S3-GEEK Development Board
ESP32-S3-GEEK is a geek development board with built-in USB-A port, 1.14-inch LCD screen, TF card slot and other peripherals. It supports 2.4 GHz WiFi and BLE 5, with built-in 16 MB Flash & 2 MB PSRAM, provides I²C port, UART port and GPIO header for more possibilities for your project. Features Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512 KB SRAM, 384 KB ROM, 2 MB of on-chip PSRAM, and onboard 16 MB Flash memory Onboard 1.14-inch 240x135 pixels 65K color IPS LCD display Integrated 2.4 GHz WiFi and Bluetooth LE wireless communication WiFi supports Infrastructure BSS in Station, SoftAP, and Station + SoftAP modes WiFi supports 1T1R mode with data rate up to 150 Mbps Bluetooth supports high power mode (20 dBm) Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna Onboard 3-pin UART port, 3-pin GPIO header and 4-pin I²C port Equipped with plastic case and cables Provides online open-source demo and resources, more convenient for learning and development Dimensions: 61.0 x 24.5 x 9.0 mm Downloads Wiki
-
ThingPulse ThingPulse Pendrive S3
The ThingPulse Pendrive S3 is an ESP32-S3 device with USB-C plug, WS2812B RGB LED and 128 MB of flash. With the help of TinyUSB the ESP32-S3 can pretend to be many USB devices, such as: USB Memory Stick USB Keyboard USB Mouse Audio device Video device Networking device Applications As BadUSB Device with SuperWiFiDuck it can do KeyStroke injections As WiFiDisk it can be mounted by any regular computer like a memory stick and synchronize the files on the disk to the cloud As WiFiDongle it can add an additional WiFi networking device to any computer/phone Included ESP32-S3 PCB with WS2812B RGB Led Capacitive Touch Button (Spring) USB Drive Plastic Enclosure Downloads CircuitPython
-
FNIRSI FNIRSI NVS-20 4K Night Vision Monocular
The FNIRSI NVS-20 is a versatile monocular night vision device, ideal for clear observation in complete darkness or low light. It offers unlimited range in weak light and up to 300 m in total darkness. Featuring a USB port and TF card slot, it supports firmware updates and media storage. With a color screen, it performs seamlessly day or night, enabling photo capture, video recording, playback, and up to 6x electronic zoom. The NVS-20 is the ultimate tool for enhancing night vision capabilities. Specifications Electronic Zoom 6x Objective Lens Diameter 25 mm Low Light or Daytime Observation Distance 2 m~∞ Full Black Observation Distance 300 m (max) Video Resolution 4K (3840x2160) / 2K (2560x1440) / 1080FHD (1920x1080) / 720P (1280x720) / VGA (640x480) / QVGA (320x240) Photo Resolution 36MP / 32MP / 30MP / 24MP / 20MP / 16MP / 12MP / 10MP / 8MP / 5MP / 3MP / VGA IR Wavelength 850 nm Water Resistance Level IPX6 White Balance Automatic, Daylight, Cloudy, Tungsten Filament, Fluorescent ISO Auto, 100, 200, 400, 800 LCD Brightness Adjustment High, medium, and low levels Light Source Frequency 50 Hz / 60 Hz Storage 32 GB TF memory card Voltage 3.7 V Power supply 18650 internal battery Charging USB-C (5 V/1 A) Display 1.54 inch HD IPS screen Temperature −5~40°C Humidity 0-80% Languages Chinese / Traditional / English / Japanese / Italian / French / German / Russian / Spanish / Portuguese Dimensions 152 x 42 x 82 mm Weight 240 g Included 1x NVS-20 Night Vision Monocular 1x 18650 Lithium battery 1x TF memory card (32 GB) 1x USB cable 1x Manual Downloads Manual Firmware FW96675
-
ZEEWEII DSO154Pro Oscilloscope (18 MHz) & Signal Generator
The DSO154Pro with advanced ARM+FPGA architecture is a portable oscilloscope with a bandwidth of 18 MHz and a sampling rate of 40 MSa/s. It has an integrated signal generator that can output adjustable waveforms with an amplitude of 3 V and a frequency range of 0-500 KHz. Features 18 MHz bandwidth 40 MSa/s sampling rate 500 KHz signal generator 2.4" display 14 measurement parameters Auto adjustment Probe support: X1, X10, X100 Auto shutdown Specifications Bandwidth 18 MHz Sampling rate 40 MSa/s Display 2.4" color TFT (320 x 240) Measurements 14 types Vertical precision ±2% Rise time <3ns Storage depth 16 Kb Impedance 1 MΩ Time base 50ns-10s Vertical sensitivity 20 mV/div-10 V/div Max voltage ±40 V (x1)±400 V (x10) Trigger mode Auto/Normal/Single Trigger type Rise/Fall Trigger level Manual/Auto Display mode YT/Roll Persistence None/1s/∞ Waveforms Sinus/Square/Triangle/Noise Frequency 0-500 KHz Power supply USB-C (5 V) Battery 1000 mAh Lithium battery Dimensions 87 x 58 x 18 mm Weight 80 g Included 1x DSO154Pro Oscilloscope 1x P6100 probe 1x USB cable 1x Ring-shaped bracket 1x Manual
-
Waveshare Waveshare PCIe to Gigabit Ethernet & USB 3.2 HAT for Raspberry Pi 5
The Waveshare PCIe to Gigabit Ethernet and USB 3.2 Gen 1 HAT+ is an expansion board designed specifically for the Raspberry Pi 5. It enhances the Raspberry Pi's connectivity by adding three high-speed USB 3.2 Gen 1 ports and a Gigabit Ethernet port, all in a driver-free, plug-and-play setup. Features Based on 16-pin PCIe Interface of Raspberry Pi 5 Equipped with RTL8153B high-performance Gigabit Ethernet chip Supports Raspberry Pi OS, Ubuntu, OpenWRT, etc. Stable and reliable network speed Real-time monitoring of power status Supports USB port power control via software Included 1x PCIe to Gigabit Ethernet USB 3.2 HAT+ 1x Network cable (1.5 m) 1x 16P Cable (40 mm) 1x Standoff pack Downloads Wiki
€ 32,95€ 22,95
Members identical
-
Generic ICL8038 Signal Generator DIY Kit (5 Hz – 400 kHz)
The ICL8038 signal generator delivers versatile waveforms, including sine, triangle, square, and forward/reverse sawtooth, making it suitable for a wide range of applications. Powered by the ICL8038 chip and high-speed operational amplifiers, it ensures exceptional precision and signal stability. With a frequency range of 5 Hz to 400 kHz, it supports applications from audio to radio frequencies. Its adjustable duty cycle, ranging from 2% to 95%, allows for precise waveform customization to meet various needs. The DIY kit is beginner-friendly, featuring through-hole components for easy assembly. It includes all necessary parts, an acrylic shell, and a detailed manual, providing everything required to build and use the signal generator efficiently. Specifications Frequency range 5 Hz~400 KHz (adjustable) Power supply voltage 12 V~15 V Duty cycle range 2~95% (adjustable) Low distortion sine wave 1% Low temperature drift 50 ppm/°C Output triangular wave linearity 0.1% DC bias range −7.5 V~7.5 V Output amplitude range 0.1 V~11 VPP (working voltage 12 V) Dimensions 89 x 60 x 35 mm Weight 81 g Included PCB incl. all necessary components Acrylic shell Manual
€ 14,95€ 7,95
Members identical
-
Uni-Trend UNI-T UT381 Light Meter (Luxmeter)
The UT381 light meter measures light intensity and displays the results in Lux or FC. It has a high sampling rate of 100/s. The low power consumption enables continuous operation of up to 200 hours. The results can be stored in the device and transferred to a PC for further analysis, printing and saving. Features Auto/manual range, data hold Auto power off (cancelable) MAX/MIN modes 2044 sets data storage Displays time and adjustable record intervals (0.5~255s) Restore to default mode Lux/FC selectable Specifications Illuminance measurement (Lux) 20 Lux ±(3%+20) 200 Lux ±(3%+8) 2000 Lux ±(3%+8) 20000 Lux ±(3%+8) Display count 2000 Data storage 2044 Auto power off approx. 10 minutes Low battery indication approx. ≤7.1 V Auto range √ Data hold √ MAX/MIN mode √ Real-time clock √ Auto record time setup √ USB interface √ Power 9 V battery (6LF22) Display 22.5 x 32.5 mm Dimensions 195 x 45 x 26 mm Weight 185 g Downloads Datasheet Manual
-
Seeed Studio reComputer J1020 v2 – Edge AI Device with NVIDIA Jetson Nano (4 GB)
The reComputer J1020 v2 is a compact edge AI device powered by the NVIDIA Jetson Nano 4 GB production module, delivering 0.5 TFLOPs of AI performance. It features a robust aluminum case with a passive heatsink and comes pre-installed with JetPack 4.6.1. The device includes 16 GB of onboard eMMC storage and offers 2x SCI, 4x USB 3.0, M.2 Key M, HDMI, and DP. Applications Computer Vision Machine Learning Autonomous Mobile Robot (AMR) Specifications Jetson Nano 4 GB System-on-Module AI Performance Jetson Nano 4 GB (0.5 TOPS) GPU NVIDIA Maxwel architecture with 128 NVIDIA CUDA cores CPU Quad-core ARM Cortex-A57 MPCore processor Memory 4 GB 64-bit LPDDR4 25.6 GB/s Video Encoder 1x 4K30 | 2x 1080p60 | 4x 1080p30 | 4x 720p60 | 9x 720p30 (H.265 & H.264) Video Decoder 1x 4K60 | 2x 4K30 | 4x 1080p60 | 8x 1080p30 | 9x 720p60 (H.265 & H.264) Carrier Board Storage 1x M.2 Key M PCIe Networking Ethernet 1x RJ-45 Gigabit Ethernet (10/100/1000M) I/O USB 4x USB 3.0 Type-A1x Micro-USB port for device mode CSI Camera 2x CSI (2-lane 15-pin) Display 1x HDMI Type A; 1x DP Fan 1x 4-pin Fan Connector (5 V PWM) CAN 1x CAN Multifunctional Port 1x 40-Pin Expansion header 1x 12-Pin Control and UART header Power Supply DC 12 V/2 A Mechanical Dimensions 130 x 120 x 50 mm (with Case) Installation Desktop, wall-mounting Operating Temperature −10°C~60°C Included reComputer J1020 v2 (system installed) 12 V/2 A power adapter (with 5 interchangeable adapter plugs) Downloads reComputer J1020 v2 datasheet reComputer J1020 v2 3D file Seeed NVIDIA Jetson Product Catalog NVIDIA Jetson Device and Carrier Boards Comparison
€ 369,00€ 289,00
Members identical
-
Raspberry Pi Foundation Raspberry Pi PoE+ Injector
The Raspberry Pi PoE+ Injector adds Power-over-Ethernet (PoE) functionality to a single port of a non-PoE Ethernet switch, delivering both power and data through one Ethernet cable. It provides a plug-and-play, cost-effective solution for incrementally introducing PoE capability into existing Ethernet networks. The PoE+ Injector is a single-port, 30 W device suitable for powering equipment compliant with IEEE 802.3af and 802.3at standards, including all generations of Raspberry Pi PoE HATs. It supports network pass-through speeds of 10/100/1000 Mbps. Note: A separate IEC mains cable is required for operation (not included). Specifications Data rate 10/100/1000 Mbps Input voltage 100 to 240 V AC Output power 30 W Power output on pins 4/5 (+), 7/8 (–) Nominal output voltage 55 V DC Data connectors Shielded RJ-45, EIA 568A and 568B Power connector IEC c13 mains power input (not included) Storage humidity Maximum 95%, non-condensing Operating altitude –300 m to 3000 m Operating ambient temperature 10°C to +50°C Dimensions 159 x 51.8 x 33.5 mm Downloads Datasheet
€ 29,95
Members identical
