Hand Tools

28 products


  • Sensepeek 4019 PCBite Kit met 2x 200 MHz en 4x SP10 handsfree Probe

    Sensepeek Sensepeek 4019 PCBite Kit with 2x 200 MHz and 4x SP10 handsfree Probe

    PCBite holds your circuit board during soldering, inspection and test. SP200: 200 MHz hands-free oscilloscope probe The first truly hands-free 200-MHz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to set up. Just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54 mm (0.100ʺ) pitch pin header. The SP200 comes with a powerful magnet in the base, as for all PCBite probes and holders, which makes the probe easy to place and reposition. This probe is perfect for those who already has a metal base plate and holders which is a must for the function. SP10: Passive 1:1 hands-free probe A truly hands-free probe! Makes instant measurements or long triggering sessions simple. No more soldering wires to connect your probe or complicated tools to setup. Just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool. The dual pin header connector fits directly on a 2.54 mm (0.100”) connector. The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders, which makes the probe easy to place and reposition. Included 4x PCBite holder 1x Large Base plate (A4) 4x SP10 probes with pin tipped test needles 4x Extra test needles 1x Set of yellow insulation washers 5x Dupont-to-dupont test wires 2x Banana-to-dupont test wires 1x Micro fiber cloth 2x SP200 (200-MHz hands-free oscilloscope probe) 2x Testhook with detachable cable for ground connection 4x Ground cables (5 cm and 10 cm) 2x Set of color coded cable holders (4 colors) 2x Extra test needle Downloads (User Guides) PCBite Kit SP200 SP10

    $298.00

    Members $268.20

  • Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    Sensepeek Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.The dual pin header connector fits directly on a 2.54 mm (0.100”) connector.The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.Included 4x PCBite holder 1x Large base plate (A4) 4x PCBite probe with pin tipped test needle 4x Extra crown tipped test needle 1x Set of yellow insulation washers 5x Dupont to dupont test wire 2x Banana to dupont test wire 1x Microfiber cloth DownloadsUser Guide

    $161.00

    Members $144.90

  • Sensepeek 6003 PCBite Kit incl. 4x SQ10 Probe and Test Wires

    Sensepeek Sensepeek 6003 PCBite Kit incl. 4x SQ10 Probe and Test Wires

    Out of stock

    The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with the included PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. One side of the included baseplate is matte and the other is mirror polished. The mirror polished surface makes it easy to see components on the circuit board underside. For added protection during measurement the included insulation cover can be mounted on one of the surfaces. Included 4x PCBite PCB holders 1x Set of yellow insulation washers for the PCB holders 1x Large Base plate (A4) 1x Insulation cover for the base plate (A4) 1x Micro fiber cloth 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide (PCBite kit) User guide (SQ10 probes)

    Out of stock

    $183.00

    Members $164.70

  • Cleaning Nozzle Drill Kit (0.1-1.0 mm)

    Cleaning Nozzle Drill Kit (0.1-1.0 mm)

    Cleaning nozzle drill kit small box containing 10 carbide PCB drills from 0.1 mm to 1 mm all with 4 mm shaft. Ideal for drilling small precision holes in pcb's, plastic or soft metal.

    $10.00

    Members $9.00

  • PCB Holder ZD-11E

    Zhongdi PCB Holder ZD-11E

    This adjustable circuit board holder is ideal for clamping PCB for soldering, desoldering or rework. Features 2 adjustable grips on a retractable stand to accommodate various board sizes. The adjustable clamps allow the PCB to rotate 360 degrees and stay set in any position. The base of this rigid metal stand features four rubber feet to ensure stability. Specifications Product size 30 x 16.5 x 12.5 cm Max. holding size 20 x 14 cm Weight 450 g

    $12.00

    Members $10.80

  • Sensepeek 4020 PCBite 3x vergrootglas

    Sensepeek Sensepeek 4020 PCBite 3x Magnifier

    The PCBite Magnifier (premium build quality made from CNC machined aluminum) enlarges your target and makes it easier to see during soldering, inspection and measurements. Especially useful when placing PCBite hands free probes on fine pitch SMD components during measurements. 3x magnification edgeless lens for increased visibility of the work surface and AR coating (anti-reflection) to reduce reflections from nearby light sources. Optimized design, magnification and focal point for use together with the PCBite PCB holders and baseplates included in all PCBite kits. Can also be used handheld but not standalone without a metal surface as base. At the bottom of the magnifier foot there is a strong magnet perfectly balanced in strength. A low friction bottom cap protects the magnet and the baseplate to make the magnifier easy to slide when repositioning or removing the magnifier from the baseplate. Friction based adjustment of lens tilt and rotate positions takes away the need for annoying and complicated set screws.

    $83.00

    Members $74.70

  • Sensepeek 4012 PCBite Kit incl. 2x SP10 Probe for DMM

    Sensepeek Sensepeek 4012 PCBite Kit incl. 2x SP10 Probe for DMM

    PCBite is the complete solution handling your circuit board during the development phase. Powerful magnets together with a stainless base plate makes the system flexible, mobile and user friendly. The holder can easily be repositioned to handle circuit boards of varying shape and sizes. The probes are steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter or prefered tool. Included 4x PCBite holder 2x Banana to DuPont test wires red/black 2x SP10 probe with red/black probe head and pin tipped test needles 2x Extra crown tipped test needle 1x Set of yellow insulation washers 1x Large Baseplate (A4) 1x Microfiber cloth Downloads User Guide

    $117.00

    Members $105.30

  •  -40% ESD Tweezers ZD-156D

    Zhongdi ESD Tweezers ZD-156D

    These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 120 mm Width 9 mm

    $5.00$3.00

    Members identical

  •  -40% ESD Tweezers ZD-156A

    Zhongdi ESD Tweezers ZD-156A

    These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 125 mm Width 11 mm

    $5.00$3.00

    Members identical

  • Sensepeek 4013 SP100 (100 Mhz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 4013 SP100 (100 Mhz handsfree Oscilloscope Probe)

    The ground probe connection has a detachable quality hook, and the cable fits directly on a 2.54 mm pitch pin header. Included 1 x SP100 - 100 Mhz handsfree oscilloscope probe 1 x Set of color-coded cable holders(4 colors) 1 x Test hook with detachable cable for ground connection 1 x Extra test needle Download User Guide

    $56.00

    Members $50.40

  • Sensepeek 4015 PCBite Kit incl. 2x SP100 (100 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 4015 PCBite Kit incl. 2x SP100 (100 MHz handsfree Oscilloscope Probe)

    Features This complete kit includes everything you need for hands-free measurements with your oscilloscope. SP100 is the first truly handsfree 100 Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54 mm (0.100”) pitch pin header. The SP100 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. Included 4x PCBite holder 2x SP100 (100 MHz handsfree oscilloscope probe) 1x Large baseplate (A4) 1x Microfiber cloth 1x Set of yellow insulation washers Downloads User Guide (PCBite Kit) User Guide (SPx00)

    $188.00

    Members $169.20

  • PCB Drill Kit 0.8 mm

    PCB Drill Kit 0.8 mm

    Cleaning nozzle drill kit small box containing 10 carbide PCB drills 0.8 mm all with 4 mm shaft. Ideal for drilling small precision holes in pcb's, plastic or soft metal.

    $10.00

    Members $9.00

  •  -40% ESD Tweezers ZD-156F

    Zhongdi ESD Tweezers ZD-156F

    Out of stock

    These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 120 mm Width 9 mm

    Out of stock

    $5.00$3.00

    Members identical

  •  -40% ESD Tweezers ZD-156E

    Zhongdi ESD Tweezers ZD-156E

    These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 115 mm Width 9 mm

    $5.00$3.00

    Members identical

  • Sensepeek 6011 2x SQ10 Probe for DMM (red/black)

    Sensepeek Sensepeek 6011 2x SQ10 Probe for DMM (red/black)

    The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 2x SQ10 probes and pin tipped test needles (red/black) 2x Banana to dupont test wires (red/black) 1x Set of cable holders (red/black) 2x Extra test needles Downloads User guide

    $56.00

    Members $50.40

  • Sensepeek 6005 4x SQ10 Probe incl. Test Wires

    Sensepeek Sensepeek 6005 4x SQ10 Probe incl. Test Wires

    The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide

    $106.00

    Members $95.40

  •  -14% Repair Platform Tool and PCB Holder ZD-11F

    Zhongdi Repair Platform Tool and PCB Holder ZD-11F

    This multi-purpose tool offers an excellent all round solution, ideal for holding big size PCBs and desoldering work, etc.Features The arms of the repair station can move up and down conveniently, easy for operation. The adjustable parts are made of the same material for microscope, with high quality, perfect stability and precision. The rubber feet can move in all directions, ensuring the operation platform is always on a flat surface. Suitable for desoldering BGA ICs. Specifications Rough adjusting range in height 0∼230mm Precise adjusting range in height 0∼60 mm Max. holding size of PCB 250 mm (length or width) Min. holding size of PCB 20 mm (length or width)

    $188.00$161.00

    Members identical

  •  -40% ESD Tweezers ZD-156C

    Zhongdi ESD Tweezers ZD-156C

    These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 135 mm Width 9 mm

    $5.00$3.00

    Members identical

  • PCW08G Tweezers Set (9 pieces)

    PCWork PCW08G Tweezers Set (9 pieces)

    With the PCW08G 9-piece tweezer set, you are well equipped to perform precision work on sensitive electronic components. The tweezers are made of coated stainless steel and are therefore particularly durable and resistant. The set is antistatic and ESD-safe, which means that the tweezers are ideal for working with electronic components, as they prevent electrostatic charges, thus avoiding damage to the components. With the set you get a storage bag, enabling you to safely store and transport your tweezers. So you always have everything ready to hand when you need it. Thanks to the different shapes and tip types of the tweezers, the set is ideal for a variety of applications, such as model making, jewelry making and watch repair. Even the smallest components can be easily gripped and positioned. Included ESD-10, straight tip ESD-11, straight tip ESD-12, straight tip ESD-14, straight tip ESD-16, straight tip ESD-13, flat round head ESD-15, 45° curved tip ESD-17, 30° curved tip ESD34A-sa, flat head Storage bag

    $12.00

    Members $10.80

  • Sensepeek 6014 SQ200 (200 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 6014 SQ200 (200 MHz handsfree Oscilloscope Probe)

    3 in stock

    The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. Features The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Included 1x SQ200 200 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.2

    3 in stock

    $83.00

    Members $74.70

  •  -40% ESD Tweezers ZD-156B

    Zhongdi ESD Tweezers ZD-156B

    These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 110 mm Width 9 mm

    $5.00$3.00

    Members identical

  • Hobby Creek Fume Extractor Arm

    Hobby Creek Hobby Creek Fume Extractor Arm

    Blow away the fumes with this handy little fume extractor! This extractor comes ready to run and can be powered off any USB power source with the included 6 foot cable. Simply screw it into any of our Third Hand products, plug in the cable and let her rip! The 3D printed housing creates a compact and durable enclosure that holds the carbon filter to the fan. This system not only pulls away the fumes but also filters it. The small size and flexible arm allows you to place the extractor exactly where you need it. What you get Pre-assembled fume extractor on an arm 6 foot USB micro cable Spare carbon filter Tech Specs Housing dimensions: 2.25 x 2 x 1.25 inch Arm Length: 12' Current Draw: 500 mA Voltage: 5 V (any USB port will work) Note: power source not included. Can use any USB port including phone chargers or computers.

    $40.00

    Members $36.00

  • Last stock! Weller ESF 120ESD PCB-houder

    Weller Weller ESF 120ESD PCB Holder

    2 in stock

    This fast mounting frame has a spring clamp, rotates through 360° in increments of 15° and has a cushioned pressure arm for keeping components in place when you flip the board upside down for soldering. Max. size 160 x 235 mm Rotates through 360° in increments of 15° Spring clamp Cushioned arm for component fixing PCB holder

    2 in stock

    $183.00

    Members $164.70

  • Sensepeek 6024 SQ500 (500 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 6024 SQ500 (500 MHz handsfree Oscilloscope Probe)

    The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Features Passive 10:1 probe with support for oscilloscopes with automatic scaling Spring-loaded test needle for fine pitch measurements Multiple ground options Color coded cable holders Probe tip protection Insulated, can be used handheld Improved probe holder for handsfree measurement when used with PCBite PCB holders Included 1x SQ500 500 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.1

    $133.00

    Members $119.70

Login

Forgot password?

Don't have an account yet?
Create an account