NanoVNA V2 Vector Network Analyzer (50 kHz – 3 GHz)

Description

The NanoVNA V2 with 3.2-inch color touch display is a portable vector network analyzer that operates up to 3 GHz. Designed for higher frequency measurements, this compact analyzer is encased in an all-metal housing that not only shields and reduces external interference but also fully protects the internal precision circuits.

With this device, you can measure RF, VHF, and UHF standing waves, among other parameters. It offers powerful functions, including the measurement of S-parameters, voltage standing wave ratio (VSWR), phase, delay, and Smith charts.

Specifications

Frequency range 50 kHz – 3 GHz
System dynamic range (after calibration) 70 dB (up to 1.5 GHz)
60 dB (up to 3 GHz)
S11 noise floor (after calibration) −50 dB (up to 1.5 GHz)
−40 dB (up to 3 GHz)
Sweep rate 100 points/second
Sweep points (on device) 10-201 points (adjustable)
Sweep points (USB) 1-1024 points (adjustable)
Power supply USB (4.6-5.5 V)
RF port SMA
USB interface Micro USB
Display 3.2" color touch screen (320 x 480)
Battery 1x 2000 mAh lithium battery (built-in)
Port 2 return loss ≥13 dB (up to 3 GHz), 20 dB (up to 1.5 GHz)
Display tracking 4, Marking: 4, Save settings: 5
Case material Metal
Dimensions 115 x 86 x 25 mm

Included

  • 1x NanoVNA V2 Vector Network Analyzer
  • 2x SMA Male to Male SS405 RF cable (30 cm)
  • 1x SMA Female to Female connector
  • 1x Calibration Kit (50 Ω Load)
  • 1x Calibration Kit (Short)
  • 1x Calibration Kit (Open)
  • 1x Stylus pen
  • 1x USB data cable
  • 1x Manual
Product form

The NanoVNA V2 with 3.2-inch color touch display is a portable vector network analyzer that operates up to 3 GHz. Designed... Read more

Pre-order

€ 109,95€ 89,95 incl. VAT
Members identical

    Details

    SKU: 20913
    EAN: 020913

    Description

    The NanoVNA V2 with 3.2-inch color touch display is a portable vector network analyzer that operates up to 3 GHz. Designed for higher frequency measurements, this compact analyzer is encased in an all-metal housing that not only shields and reduces external interference but also fully protects the internal precision circuits.

    With this device, you can measure RF, VHF, and UHF standing waves, among other parameters. It offers powerful functions, including the measurement of S-parameters, voltage standing wave ratio (VSWR), phase, delay, and Smith charts.

    Specifications

    Frequency range 50 kHz – 3 GHz
    System dynamic range (after calibration) 70 dB (up to 1.5 GHz)
    60 dB (up to 3 GHz)
    S11 noise floor (after calibration) −50 dB (up to 1.5 GHz)
    −40 dB (up to 3 GHz)
    Sweep rate 100 points/second
    Sweep points (on device) 10-201 points (adjustable)
    Sweep points (USB) 1-1024 points (adjustable)
    Power supply USB (4.6-5.5 V)
    RF port SMA
    USB interface Micro USB
    Display 3.2" color touch screen (320 x 480)
    Battery 1x 2000 mAh lithium battery (built-in)
    Port 2 return loss ≥13 dB (up to 3 GHz), 20 dB (up to 1.5 GHz)
    Display tracking 4, Marking: 4, Save settings: 5
    Case material Metal
    Dimensions 115 x 86 x 25 mm

    Included

    • 1x NanoVNA V2 Vector Network Analyzer
    • 2x SMA Male to Male SS405 RF cable (30 cm)
    • 1x SMA Female to Female connector
    • 1x Calibration Kit (50 Ω Load)
    • 1x Calibration Kit (Short)
    • 1x Calibration Kit (Open)
    • 1x Stylus pen
    • 1x USB data cable
    • 1x Manual

    Customer Reviews

    Based on 5 reviews
    60%
    (3)
    20%
    (1)
    20%
    (1)
    0%
    (0)
    0%
    (0)
    J
    J.D.
    Nano VNA

    Snel geleverd, in tegenstelling tot eerdere ervaringen.
    werkt prima,maar onduidelijk of de firmware van dit toestel nog te updaten is.

    D
    Danny B.
    Onmisbaar

    Na de eerste ervaringen een onmisbaar instrument voor de RF man. Een toestelletje met uitgebreide mogelijkheden waarbij wel verwacht wordt dat de gebruiker de nodige technische RF kennis heeft. Honderd procent tevreden met mijn aankoop.

    H
    Heinz B.
    NanoVNA V2

    Schnell und gut

    H
    Hendrik K.F.M.
    Als Clone super für das Geld!

    Als Clone des original NanoVNA V2 von HCXQS und OwOComm ein sehr gelungenes kleine Gerät wenn man die etwas schlechteren Specs zum Original in Kauf nehmen kann. Gute Messkabel sind einfach ein Muss. Und ein SMA Dreh Moment Schlüssel ist definitiv zu empfehlen! Ich lasse meine Messkabel immer am Gerät (0,45Nm) und habe somit auch jederzeit wiederholbare Messergebnisse. Wer sich also kein Gerät von RigExpert leisten will oder kann, der ist mit diesem kostengünstigen Analyzer gut bedient sofern er weiss was die Grenzen dieses kleinen Teils sind. 😏
    Persönlich bin ich damit sehr zufrieden.

    J
    JH
    Fehlende Zusatz-Informationen

    Ich bin leider enttäuscht, dass kein Manual (speziell für diesen Typ - im www. gibt es verwirrend viele Versionen) beigelgt oder referenziert wurde.

    Login

    Forgot password?

    Don't have an account yet?
    Create an account