Soldering Accessories
-
Zhongdi ZD-153A Solder Fume Extractor
Fumes released during the soldering process are potentially harmful to health. This solder fume extractor is securely fastened to the work table with a bracket. Thanks to the 3 axes, the solder fume extractor can be positioned perfectly, i.e. directly above the rising solder fumes. The harmful solder fumes are extracted by a powerful but quiet fan and filtered by an activated-carbon filter mat. Features Removes solder fumes Absorbs toxic gases and fumes from brazing operations Helps reduce the likelihood of headaches, eye irration and neusea Adjustable absorption angle for accurate placement Easy replaceable activated carbon filter High-performance fan Low noise and long life service Specifications Absorption capacity: 1 m³/min (max.) Power consumption: 23 W Power supply: 220-240 VAC Amount of activated carbon filter: 7 g Maximum absorption weight: 2 g Dimensions: 220 x 270 x 168 mm (W x H x D) Weight: 1.4 kg
€ 52,95
-
Zhongdi Desoldering Tip Set for ZD Models
This set contains 3 desoldering tips for digital desoldering stations such as ZD-915 or ZD-8965. Included 1x Desoldering tip N5-1 (0.8 mm) 1x Desoldering tip N5-2 (1.0 mm) 1x Desoldering tip N5-3 (1.3 mm)
€ 9,95€ 4,95
Members identical
-
Niimbot Niimbot D110 Label Printer
Based on direct thermal technology, the Niimbot D110 label printer offers a printing experience without ink, toner or ribbons, making it a cost-effective solution compared to traditional printers. Its compact size and light weight make it easy to transport and fits easily into any pocket. With Bluetooth connectivity and a built-in 1500 mAh battery, this wireless mini printer allows you to print from up to 10 meters away, giving you flexibility on the go, whether you're printing from your smartphone or tablet. The "Niimbot" app (available for iOS and Android) offers a variety of free templates for customizing labels. Specifications Model D110_M (Upgraded Version 2024) Material ABS Resolution 203 DPI Printing speed 30-60 mm/s Print width 12-15 mm Printing technology Thermal Operating temperature 5°C ~ 45°C (41°F ~ 113°F) Battery capacity 1500 mAh Charging interface USB-C Charging time 2 hours Connection Bluetooth 4.0 Wireless distance 10 m Dimensions 98 x 76 x 30 mm Weight 149 g Included 1x Niimbot D110 Label Printer 1x Label tape (12 x 40 mm) 1x USB cable 1x Manual Downloads iOS App Android App
€ 29,95€ 19,95
Members identical
-
Stickvise Stickvise PartLift Component Holder (Pack of 2)
An easy way to hold parts to the bottom of a PCB while soldering PartLift holds thru hole parts in place to free up your hands while you solder the legs. A simple but useful tool to go along with your Stickvise. The base pad is non-slip silicone foam, the body of the tool is ABS which provides very light spring tension to hold your part in place. The tip of the tool is made from high temperature silicone that withstands soldering temperatures without being damaged. Features PartLift holds thru hole parts in place during soldering Use with a Stickvise or any low profile PCB holder The tip is silicone that withstands soldering temperatures The base pad is non-slip silicone foam Specifications Material Silicone Dimensions 109 x 40 x 40 mm Weight 59 g
€ 19,95€ 9,95
Members identical
-
Stickvise Stickvise High Temperature PTFE Jaw (Pack of 2)
An upgraded jaw set that withstands direct contact with a soldering iron Stickvise High Temperature PTFE Vise Jaws will withstand accidental contact with a soldering iron and will not melt. These are a great upgrade for your Stickvise. Features Made from PTFE with extremely high melting point Withstands incidental contact with a soldering iron This is the jaw plates only, does not include a Stickvise Specifications Material Aluminum Dimensions 73 x 53 x 3 mm Weight 21 g
€ 19,95€ 9,95
Members identical
-
Zhongdi ZD-129 Magnifying LED Desk Lamp
This desk lamp is ideal for your workplace. With the 5-inch 5D-lens, the finest work can be done. The lamp has 80 integrated LEDs. Features Lens size: 5 inch Lens material: glass Diopter: 5D Light source: T5 22 W fluorescent energy-saving bulb (80pcs LED) Standard mount: table base Voltage: 220-240 V Power: 22 W
€ 50,00
-
ATETOOL T80-B Soldering Tip for Soldering Station AE970D
T80-B (T80-D08) Soldering Tip for Soldering Station AE970D (0.8 mm, pointed)
€ 9,95€ 4,95
Members identical
-
Aoyue Replacement Filter Set for Aoyue 8486 Fume Extractor
This complete replacement filter set for the Aoyue 8486 Fume Extractor contains a HEPA (High Efficiency Particulate Air) filter, a cotton air (sub) filter and an activated carbon air filter.
€ 39,95€ 19,95
Members identical
-
ATETOOL T80-D Soldering Tip for Soldering Station AE970D
T80-D (T80-D12) Soldering Tip for Soldering Station AE970D (1.2 mm, chisel)
€ 9,95€ 4,95
Members identical
-
ATETOOL T80-K Soldering Tip for Soldering Station AE970D
T80-K (T80-BC1) Soldering Tip for Soldering Station AE970D (1 mm, beveled)
€ 9,95€ 4,95
Members identical
-
ATETOOL T80-C Soldering Tip for Soldering Station AE970D
T80-C (T80-D16) Soldering Tip for Soldering Station AE970D (1.6 mm, chisel)
€ 9,95€ 4,95
Members identical
-
Zhongdi Nozzle Set for Hot Air Rework Stations (ZD Models)
This set contains 3 nozzles for Hot Air Rework Stations such as ZD-8922 or ZD-8968. Included 1x Hot air nozzle 79-3911 1x Hot air nozzle 79-3912 1x Hot air nozzle 79-3913
€ 12,95€ 6,50
Members identical
-
Robins Tools Pixel Pump – Pick-and-Place Machine for Manual SMT Assembly
Pixel Pump is an open source vacuum pump for manual SMT assembly. It comes with a comfortable pen, a foot pedal, RGB LED buttons, and a variety of features that make hand assembly a lot more fun. It’s the perfect companion for manual SMT soldering applications, from individual prototypes to small production runs. Thoughtful, High-Quality Design Pixel Pump ships with a set of five stainless-steel nozzles in each of five different sizes, with outer diameters ranging from 0.3 mm all the way up to 1.8 mm. With this set, you should be able to pick and place most SMD components, including small 0402 passives, larger parts like inductors and ICs, and just about everything in between. The nozzles are held in place by a Luer lock slip fitting that facilitates quick nozzle changes and broad compatibility with third-party nozzles. The pen itself features a barbed connection for the air hose and incorporates four M8 steel nuts to give it some heft and to enable magnetic attachment to Pixel Pump. Tactile silicone buttons with RGB backlighting offer full control over the unit. You can change operation modes, switch between high- and low-power settings, or activate reverse mode to clean your nozzle. The buttons also allow you to configure things like vacuum power and LED brightness. Pixel Pump has a pressure-relief valve that dumps vacuum to ensure that your part gets released quickly when you release the foot pedal. Optionally, you can configure that valve to switch from suction mode to pressure mode, which quickly and easily cleans the nozzle in case you have accidentally sucked in debris like solder paste. A sintered air filter protects the vacuum pump and valves from debris that might otherwise be sucked into the system. It is accessible from the outside and can easily be cleaned and reused. A Perfect Companion For Prototype Boards & Small-Scale Manufacturing Pixel Pump was designed primarily for individuals and organizations that manufacture one-off prototypes, but it’s also well suited for small production runs. It’s super easy to use and is actually faster than an automated pick-and-place machine for smaller batch sizes, especially when combined with SMD Magazines. Pixel Pump is the perfect companion for hobbyists and professionals who love making their own PCBs. Features Comfortable pen that accommodates various vacuum nozzles Small, flexible, heat-resistant silicone hose that connects the pen to Pixel Pump Magnetic base for the pen Strong, adjustable vacuum, perfect for picking small and large components alike Tactile, silicone RGB-button interface Foot pedal for triggering the pump Adjustable high/low power settings Adjustable LED brightness Reverse mode, which creates pressure instead of suction to clean nozzles Vacuum relief valve for quick depressurization to drop parts more quickly Easy software updates via USB Type-C Compact design that respects the limited surface area of your workbench Downloads 3D STL Files Firmware Mainboard Schematics UI Board Schematics Motor Controller Schematics
-
Robins Tools SMD Magazine for Pixel Pump (Eight Pack) – Organizing SMD Parts
SMD Magazines are injection-molded containers and a great way to organize and consume SMD parts. They are custom built to store components and present them for picking. They can load up to 12-mm-wide, 9.5-mm tall tapes. They replace those hard-to-find plastic bags while being an excellent source of parts to pick and placing using Pixel Pump. Each SMD-Magazine Rail presents up to eight magazines at the perfect angle for you to pick and place their components using Pixel Pump. You can also use these rails to group components for specific projects. They are equipped with non-slip rubber feet and weighted for extra stability.
€ 54,95€ 27,50
Members identical
-
Robins Tools SMD Magazine Rail for Pixel Pump
An SMD Magazine rail holds up to eight SMD Magazines. A given rail can be used to hold a project-specific set of magazines indefinitely. Magazines are held at a right angle, ready to be picked and placed by Pixel Pump. Each SMD-Magazine Rail presents up to eight magazines at the perfect angle for you to pick and place their components using Pixel Pump. You can also use these rails to group components for specific projects. They are equipped with non-slip rubber feet and weighted for extra stability.
€ 54,95€ 27,50
Members identical
-
Loomia Loomia Single Backlit Button
The single backlit button is a simple mechanical switch that comes with an LED inside. When you press the button, the circuit is completed, driving your pin high or low. Use the embedded LED to make a glowing power icon, logo , or whatever suits your fancy. Features Press durability: Up to 10,000 times pressing under 5lbf (22.24 N) LED Voltage: 5 V Component: 2" x 3" Individual (5,08 x 7,62 cm) Button Size: 1" radius circle (2,54 cm)
€ 49,95€ 24,95
Members identical
-
Loomia Loomia Double Backlit User Interface
Double Backlit User Interface: The dual backlit button is just like the single backlit button, but twice the fun! Use this component when you need to operate something up and down, or right to left. Using cut-out vinyl, you can create icons and stickers on fabric that show your users button functionality. Features Component: 4.6 x 6.3" Individual Button Size: 1" radius circle Press Durability: Up to 10,000 presses under 5lbf LED Voltage: 5 V
€ 54,95€ 27,50
Members identical
