LCR Meters

6 products


  • JOY-iT LCR-T7 Multi-function Component Tester

    JOY-iT JOY-iT LCR-T7 Multi-function Component Tester

    1 review

    This LCR meter offers a wide range of functions at a low price. The LCR meter can measure capacitance, resistance, and inductance among other things. In addition, it can automatically recognize components, for example, it can distinguish between different types of transistors, such as NPN or PNP transistors. The device is particularly easy to operate, as all measurements are started at the touch of a single button. Thanks to the integrated 350 mAh battery, measurements can also be carried out on the road. The battery is charged with the help of a 5 V power supply unit (available separately) and the enclosed micro-USB cable. In addition, this measuring device can decode infrared signals and show them as a waveform on the display. Specifications Measurable components Resistor, capacitor, inductor, thyristor, triac, (double) diode, Z-diode, field effect transistor, bipolar transistor, infrared decoder Display type 3.5" TFT LCD (160 x 128 p) Special features Automatic calibration, One key operation Built-in battery Lithium Ion rechargeable, 3,7 V, 350 mAh Dimensions 90 x 70 x 27 mm Items delivered Tester, Micro-USB cable, Test clip, LED, Capacitor Measuring Ranges Capacitance 25 pF - 100 mF Resistance 0.01 Ω - 50 MΩ Inductance 0.01 mH - 20 H Battery 0.1 V - 4.5 V, 300 mAh Z-diode breakdown voltage 0.01 V - 30 V Z-diode 0.01 V - 4.5 V Diode UF < 4,5 V Thyristor / Triac IGT < 6 mA Downloads Manual

    € 29,95

    Members € 26,96

  • UNI-T UT603 LCR Meter

    Uni-Trend UNI-T UT603 LCR Meter

    The UT603 is a handheld digital inductance capacitance meter for testing resistors, capacitors and inductors. It can also be used to measure transistor parameters. This accurate meter (with 2000 counts) can be used to check electronic components in labs, production lines and maintenance facilities. Features Manual range Continuity buzzer Diode and transistor test Low battery indication Specifications Resistance (Ω) 200 Ω / 2 kΩ / 20 kΩ / 200 kΩ / 2 MΩ / 20 MΩ ±(0.8%+1) Capacitance (F) 2 nF / 20 nF / 200 nF / 2uF / 20 uF / 200 uF / 600uF ±(1%+5) Inductance (H) 2 mH / 20 mH / 200 mH / 2 H / 20 H ±(2%+8) Display counts 2000 Power 9 V battery (6F22) Display 61 x 32 mm Dimensions 172 x 83 x 38 mm Weight 312 g Included 1x UNI-T UT603 LCR meter 1x 9 V block battery 2x Test leads with alligator clips 1x Manual Downloads User manual Datasheet

    € 49,95

    Members € 44,96

  • LCR-T4 Mega328 Transistor Tester / ESR Meter

    Kuongshun LCR-T4 Component Tester (ESR Meter)

    With this device, you'll be able to automatically to detect NPN and PNP transistors, n-channel and p-channel MOSFETs, diodes, thyristors, resistors, capacitors and many other components. It is also possible to measure certain characteristics of these devices as, for example, the current amplification factor of BJT or the gate threshold voltage of a MOSFET and much more.Features Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFETs, diodes (including double diode), thyristors, resistor and capacitor and other components Automatic testing of the pins of a component, and displaying on the LCD Detection of the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage Measurement of the gate threshold voltage and the gate capacitance of the MOSFET Simultaneous measurement of the of two resistors while displaying resistor symbol Measurement of a single diode reverse capacitance Measurements of capacitance, resolution 1 pF Identification of Darlington transistors via the base-emitter threshold voltage and current amplification factor Measurement of the bipolar transistor current amplification factor and the base-emitter threshold voltage 2x16 Characters LCD-Display (12864 LCD with green backlight) Test ranges Resistance: Max. 50 MΩ, resolution 0.1 Ω Capacitance: 25 pF – 100000 µF Inductance: 0.01 mH – 20 H Specifications One-button operation Automatic shutdown for improved battery life Shutdown current less than 20 nA

    € 19,95

    Members € 17,96

  • Atlas ESR70 Plus – ESR Tester

    Peak Peak Atlas ESR70 Gold - Low Resistance and Capacitance Meter

    The Peak Atlas ESR70 Gold is an enhanced version of the previous Peak Atlas ESR70 Plus. It does everything that the ESR70 Plus did but better. It now measures capacitance up to 10x faster, and over a wider range, thanks to new test algorithms. The capacitance measurement is also much less influenced by parallel resistances or leakage current thanks to our new Triple-Slope measurement system. Using the supplied gold plated probes (removable), the Atlas ESR70 Gold can measure ESR down to a resolution of 0.01 ohms, up to 40 ohms. It can even measure ESR for capacitors that are in-circuit. Probes are removable, allowing 2 mm compatible probes to be fitted. Audible alerts are produced for various ESR levels allowing you to perform many tests in succession without having to look at the display. The ESR70 automatically takes capacitive reactance into account, so even low value capacitors (down to 0.3 uF) can have the ESR measured accurately. Features Uses a single AAA Alkaline cell (included). Alphanumeric LCD with backlight. Automatic analysis-start when you apply the probes. Automatic capacitor discharge using controlled discharge function. ESR (and low DC resistance) measurement (even in-circuit). Capacitive reactance automatically taken into account to ensure accurate ESR. Capacitance measurement (if testing out-of-circuit). Audible alerts for various ESR levels. Extended ESR measurement range up to 40 Ohms. Optional probe alternatives easily fitted. New Gold Features Improved LCD with better backlight. 10x faster capacitance measurement for large capacitors. Enhanced user options system. New triple-slope measurement system to vastly reduce the influence of parallel resistance and/or leakage current on capacitance measurements. Much wider capacitance measurement range now 0.3 uF to 90,000 uF (was 1uF to 22,000uF). Specifications Analyser type ESR and Capacitance Component types Capacitors (>0.3 uF) ESR range 0.00 Ohms to 40.0 Ohms ESR resolution From 0.01 Ohms In-circuit use ESR only Capacitance range 0.3 uF to 90000 uF Battery type 1.5 V Alkaline AAA Cell (supplied). Life typically 1500 ops Display type Alphanumeric LCD (with backlight) Included ESR70 Equivalent Series Resistance Meter Extra-long and extra-flexible test cables (450 mm of Silicone covered cable) 2 mm gold plated plugs and sockets with removeable gold plated crocodile clips Comprehensive illustrated user guide AAA Alkaline cell Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (IT)

    € 99,95

    Members € 89,96

  • DER EE DE-5000 LCR Meter (100 kHz)

    DER EE DE-5000 LCR Meter (100 kHz)

    The DE-5000 is a smart, high-accurate, flexible and easy-to-use portable LCR meter. It features automatic LCR check, 4-wire Kelvin measurement, backlit display with 19999/1999 counts, multiple measurement modes and selectable test frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz or 100 kHz). The DE-5000 LCR meter is a practical helper for engineers or technicians. Features Auto L.C.R. check Ls/Lp/Cs/Cp/Rs/Rp/DCR with D/Q/θ/ESR measurement 4-wire Kelvin measurement 20,000 / 2,000 counts display Backlight Relative mode Series / Parallel modes Components sorting function Low battery indication Auto power off Specifications Test frequency 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz Resistance range 20.000 Ω – 200.0 MΩ DCR range 200.00 Ω – 200.0 MΩ Capacitance range 200.00 pF – 20.00 mF Inductance range 20.000 µH – 2.000 KH Display (backlit LCD) 19999 / 1999 counts Selectable tolerance ±0.25%, ±0.5%, ±1%, ±2%, ±5%, ±10%, ±20% Power supply 9 V battery Dimensions 188 x 95 x 52 mm Weight 350 g (excluding battery) Included DE-5000 LCR meter Alligator test lead case (TL-21) AC/DC adaptor Guard line (TL-23) TL-22 SMD tweezers 9 V battery Carrying case Manual Downloads Datasheet

    € 219,00

    Members € 197,10

  • UNI-T UT622E LCR Meter

    Uni-Trend UNI-T UT622E LCR Meter

    The UT622E handheld LCR meter features powerful functions, high accuracy, fast speed, and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, large-capacity rechargeable battery, and 100 kHz test frequency, the meter can be used for longstanding accurate and convenient measurement in any occasion. It is suitable for the measurement and screening of inductance, capacitance, and resistance in laboratories, production lines, maintenance points, etc. Features Max. test frequency: 100 kHz Accuracy: 0.1% Display count: 99999 Max. test rate: 20 times/s DCR: Yes Connectivity: Mini-USB Display: 2.8" TFT LCD Specifications Testfrequency 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz Test level 0.1 Vmrs, 0.3 Vrms, 1 Vrms Output impedance 100 Ω Measurement parameters Primary: L/C/R/Z/DCRSecondary: D/Q/Θ/ESR DSR speed test Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Range Auto/Hold Tolerance range 1%~20% Equivalent mode Series/Parallel Clearing connection Open/Short circuit Fuse of test ports 0.1 A/250 V Communication interface Mini-USB MAX reading of primary parameters 99999 MIN resolution 0.0001 Maximum accuracy 0.10% L 0.00 µH~99.999 H C 0.00 pF~99.999 mF Z/R 0.0000 Ω~9.9999 MΩ ESR 0.0000 Ω~999.99 Ω D 0.0000~9.9999 Q 0.0000~99999 Θ -179.9°~179.9° DCR 0.01 mΩ~20.000 MΩ Power supply 3.7 V/1800 mAh lithium polymer battery Display 2.8" TFT LCD (320x240) Dimensions 93 x 192 x 44 mm Weight 420 g Included UT622E LCR meter Short circuit board Four-terminal kelvin test leads USB cable Manual Downloads Datasheet Manual Software

    € 339,00

    Members € 305,10

Login

Forgot password?

Don't have an account yet?
Create an account