Nowadays, more and smarter phones and laptops adopt USB-C ports for its powerful function that can transmit power, data, and video information. USB-C solution can also make the device much thinner compared to the Thunderbolt 3 or HDMI-compatible port. That’s why we the CrowVi portable USB-C monitor was created. The super thin CrowVi 13.3' monitor has 2 USB-C ports, one is for power delivery, and the other is for data transmission of video and touch screen commands. The screen also can be connected through the mini HDMI-compatible port. The resolution of CrowVi is 1920x1080, which will provide a better experience for gaming and watching movies. Features CrowVi shell is made of aluminum alloy, its thickness is as thin as 5 mm, and the screen border is as narrow as 6 mm. The whole monitor looks exquisite and elegant. CrowVi can not only act as the dual monitor for smartphones, and laptops but also as the single monitor for gaming devices and some computer mainframes like Mac mini, Raspberry Pi, etc. CrowVi brings you a much larger view compared to the phone. It enables better experiences for gaming and watching movies. Specifications Screen 13.3' TFT IPS LCD Screen Size 294.5 x 164 mm Thickness 5-10 mm Resolution 1920 x 1080 Brightness 300 nits Refresh Rate 60 Hz Color Gamut 16.7M, NTSC 72%, sRGB up to 100% Contrast 800:1 Backlight LED Viewing Angle 178° Aspect Ratio 16:9 Speaker Dual speakers 8 Ω, 2 W Shell Aluminum alloy Input Mini-HD, Type-C, PD Output 3.5 mm headphone jack Power PD 5-20 V or USB-C 3.0 Operating Temperature 0-50°C Dimensions 313 x 198 x 10 mm Weight (Smart Case) 350 g Weight (Monitor) 700 g Included 13.3-inch Touch screen monitor Smart case USB-C to USB-C cable (1 m) USB-A to USB-C power cable (1 m) HDMI to mini-HDMI cable (1 m) Power adapter (5 V/2 A) HDMI to mini-HDMI adapter Dust cloth User manual Downloads User manual
This display features an IPS resolution of 480x480 with capacitive touch and a frame rate of up to 75 FPS. It is very bright and has 65,000 colors. The mechanical rotary encoder supports clockwise/counterclockwise rotation and also supports the entire pressing process, which can usually be used to confirm the process. The display module is based on ESP32-S3 with WiFi & Bluetooth 5.0 to easily connect to the Internet for IoT projects. It can be powered and programmed directly via the USB port. It also has two expansion ports, I²C and UART. Specifications Controller ESP32-S3 WROOM-1-N16R8 (16 MB Flash, 8 MB PSRAM, PCB antenna) Wireless WiFi & Bluetooth 5.0 Resolution 480x480 LCD 2.1' IPS LCD, 65K color LCD driver ST7701S Frame rate >70 FPS LCD interface RGB 565 Touch panel 5-points capacitive touch Touch panel driver CST8266 USB USB-C native Interfaces 1x I²C, 1x UART (1.25 mm, 4-pin connector) Arduino support Yes Downloads Wiki Usage with Squareline/LVGL GitHub Datasheet_ESP32-S3-WROOM-1
The Diamex LED Tube Clock ESP Kit has a WLAN interface, with which the current highly accurate time can be retrieved directly from the Internet via the home router. In addition, a battery-buffered real-time clock is built in, which takes over when no WLAN is available. The WLAN access data are configured via the LED-Basic development environment (from version 15.3.0). The Diamex LED Tube Clock ESP Kit can be operated worldwide, the time zone can be chosen arbitrarily. The winter/summer time changeover is done automatically. Specifications 8-digit, bright 7-segment display Real-time clock including mounting bracket for a CR2012 battery Time setting via PC, WLAN or directly at the clock 4 buttons Beeper (sound output) Micro USB port for power supply, basic data, bios update and terminal output Board size: approx. 130 x 75 mm
This 7' touch display convinces with its variety of different application possibilities. The display can be connected via HDMI as well as via VGA. It has a 3.5 mm audio connector and a 4-pin JST-connector, to which headphones or two 2 W / 5 Ω speakers can be connected. The integrated software allows you to configure settings such as contrast and brightness using the buttons on the side. Specifications LCD type IPS Resolution 1024 x 600 Contrast 800:1 Brightness 350 CD/m² Multitouch Capacitive, 5 Points Connections Connections HDMI, VGA, Audio 3.5 mm, JST connector for two 2 W / 5 Ω speaker Power supply 5 V/2 A Viewing angle 175° Colors 16,7 M Further special features Additional solder pads to lead the buttons to the Dimensions 165 x 124 x 13 mm Included 1x 7' Display 1x microUSB-cable 1x VGA-cable 1x HDMI-cable 1x HDMI-microHDMI-cable Downloads Datasheet Manual
The traditional 16x2 LCD requires up to 10 I/O pins to display, and the 16x2 LCD with RGB backlight requires an extra 3 pins to control the backlight color. This will take up a lot of I/O pins on the main control board, especially for development boards with fewer I/O resources such as Arduino and Raspberry Pi. With the help of the Grove I2C connector, only 2 signal pins and 2 power pins are needed. You don't even need to care about how to connect these pins. Just plug it into the I2C interface on Seeeduino or Arduino/Raspberry Pi+baseshield via the Grove cable. No complicated wiring, no soldering, no need to worry about burning the LCD caused by the wrong current limiting resistor. Easy peasy. Specifications Dimensions: 83 mm x 44 mm x 13 mm Weight: 42 g Battery: Exclude Input Voltage: 5 V
Specifications Resolution 1920 x 1080 Screen Size 15.6' Refresh Rate 60 Hz Contrast 800:1 Brightness 300 nit Screen Type TFT IPS LCD Backlight LED Backlight Color Gamut 16.7M, NTSC 72%, sRGB up to 100% Speaker Double Speaker Viewing Angle 178 ° Aspect Ratio 16:9 Power Supply 5 - 20 V or Type-C USB 3.0 Inputs Mini HDMI, Type-C, Voltage Input Outputs 3.5 mm Jack Plug Operating Temperature 0 °C - 50°C Case Aluminum Alloy Dimensions 360 mm x 230 mm x 10 mm Weight 1390 g Included Joy-View 15 Display Smart Case 1.5m HDMI to mini-HDMI cable 1m Type-C to Type-C cable 1m USB-A to USB-C cable Power Adapter HDMI to mini HDMI adapter Cleaning Towel
This mini IPS 7-inch HD monitor supports a resolution of 1024x600. IPS monitors help keep colors consistent at a wide viewing angle. The 2 removable speakers enhance your audio-visual experiences. Features Four corner holes let you mount the small monitor onto your DIY IoT projects that you’re working on. This Raspberry Pi display also comes with 2 stands, is easy to install and remove, great for on-the-go use. With a capacitive USB touchscreen, simply power the USB touch port to achieve touch function and no need to install the driver, just plug and play! Signal via HDMI-compatible port, power&touch via micro USB port, drive free. No cable solution to Raspberry Pi 4, just using 2 simple adapters to connect your Raspberry Pi 4 directly. You can use it with your Raspberry Pi 4/3/2, Laptop, TV, video game console like Nintendo Switch/Xbox/PS4, and security camera. 170-degree wide view angle 5-point capacitive HD touch display Specifications Display size 7 inch (154 x 86 mm) Resolution 1024 x 600 Display type IPS Touch Capacitive Touchscreen Frame rate 60 fps Brightness 260 cd/m² Speaker Support Interface HD & USB Working temperature −20 to +60°C Dimensions 164 x 99 mm Weight 235 g Included 1x 7-inch Monitor 1x USB to Micro USB Connector 1x HD to Micro HD Connector 1x USB to Micro USB Cable 1x HD to HD Cable 4x M2.5 Screws 4x Small Copper Pillars 2x Pro Stand 2x M3 Screws 2x Speakers 1x User Manual Downloads User Manual
The Unicorn Pack fits nicely on the back of your Pico - with a tidy 7x16 matrix (that's 112 RGB LEDs!) it's surely the fanciest backpack going. The four tactile buttons can be used to switch between modes, as controls for simple games, or adjusting brightness. It's possible to control the colour and brightness of each LED individually so you can use it to display animations, text, simple images, and more. Make a mini photo FX lamp, a smart status light for Zoom, use it to display colourful scrolling messages on your fridge, or just enjoy some pretty animations. Features 16x7 matrix of RGB LEDs (112 total) Individual colour/brightness control of each LED 4 x tactile buttons Pre-soldered female headers for attaching to Pico Compatible with Raspberry Pi Pico. Fully assembled No soldering required (as long as your Pico has header pins attached). Dimensions: approx 62mm x 25mm x 10mm (L x W x H, including headers and buttons) C/C++ and MicroPython libraries
Features LEDs: 5 x 5 x 5 = 125 LEDs User programmable via USB (creation of animation/scenes) Large amount of user programmable frames Frames are separately dimmable 4 transition speeds Available frames: 3200 5 levels LED dimming available No coding skills required Software similar to (3 x 3 x 3) Specifications Regulated power supply: 9 VDC (not incl.) Power consumption: 300 mA max. Dimensions: 110 x 110 x 150 mm / 4.33 x 4.33 x 5.9″
Arduino, MicroPython, and CircuitPython-compatible compact development board powered by Raspberry Pi RP2040RP2040-0.42LCD is a high-performance development board with integrated 0.42' LCD (70x40 resolution) with flexible digital interfaces.It incorporates Raspberry Pi's RP2040 microcontroller chip. The RP2040 features a dual-core Arm Cortex-M0+ processor clocked at 133 MHz with 264 KB internal SRAM and 2 MB flash storage.Specifications
SoC
Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller at up to 125 MHz, with 264 KB SRAM
Storage
2 MB SPI flash
Display
0.42-inch OLED
USB
1x USB Type-C port for power and programming
Expansion
– Qwiic I²C connector– 7-pin and 8-pin headers with up to 11x GPIOs, 2x SPI, 2x I²C, 4x ADC, 1x UART, 5 V, 3.3 V, VBAT, GND
Misc
– Reset and Boot buttons– RGB LED, power LED
Power supply
– 5 V via USB-C port or Vin– VBAT pin for battery input– 3.3 V regulator with 500 mA peak output
Dimensions
23.5 x 18 mm
Weight
2.5 g
DownloadsGitHub
The NixieCron M4 offers a high-precision watch chip, temperature compensated with a deviation of only a few seconds per month. It comes with a sound module, that plays hour gong and announces the current time at the push of a button. You can also connect it with the DS18B20 temperature sensor and configure it via a rotary knob. Changes, updates, extensions are easily possible via the LED-Basic development environment. Size: 250 x 120 x 100 mm Power supply 5 V via Micro-USB connection. Almost any 5 V mobile phone power supply (min. 500 mA) with Micro-USB plug can be used to power it up. Alternatively: Micro-USB cable for connection to the PC. Click here to download the software necessary for any modifications you want to perform.
Inky Frame 5.7' features a nice, big seven color E Ink display with loads of space for displaying images, text, graphs or interfaces. There's five buttons with LED indicators for interacting with the display, two Qw/ST connectors for plugging in breakouts and a micro SD card slot for all-important storage of cat photos. Every Inky Frame comes with a pair of sleek little metal legs so you can stand it up on your desk (and a selection of mounting holes if you'd prefer to do something else). There's also a battery connector so you can power it without annoying trailing wires, and some neato power saving features that mean you can run it from batteries for ages. Inky Frame is great for: Checking your calendar and upcoming appointments at a glance Attaching to your office door to display your availability Displaying motivational posters, quotes, or images (fungible or otherwise) Showing readouts from other wirelessly connected environmental boards Features Raspberry Pi Pico W Aboard Dual Arm Cortex M0+ running at up to 133 Mhz with 264 kB of SRAM 2 MB of QSPI flash supporting XiP Powered and programmable by USB micro-B 2.4 GHz wireless 5.7' EPD display (600 x 448 pixels) E Ink Gallery Palette 4000 ePaper ACeP (Advanced Color ePaper) 7-color with black, white, red, green, blue, yellow, orange. Ultra wide viewing angle – >170° Dot pitch – 0.1915 x 0.1915 mm 5x Tactile buttons with LED indicators Two Qw/ST connectors for attaching breakouts microSD card slot Dedicated RTC chip (PCF85063A) for deep sleep/wake Fully assembled No soldering required. C/C++ and MicroPython libraries Schematic Included 1x Inky Frame 5.7' (incl. Pico W) 2x Metal legs Downloads MicroPython (Learn) Getting Started with Inky Frame (Readme) Installing MicroPython
(Readme) MicroPython FAQs (and troubleshooting)
Download pirate-brand MicroPython (you'll want the Inky Frame.uf2) MicroPython examples PicoGraphics function reference C/C++ C examples Picographics function reference
A low-power, open source, 2.7-inch IoT display powered by an ESP32-S2 module and featuring SHARP's Memory-in-Pixel (MiP) screen technology The Newt is a battery-powered, always-on, wall-mountable display that can go online to retrieve weather, calendars, sports scores, to-do lists, quotes…really anything on the Internet! It is powered by an ESP32-S2 microcontroller that you can program with Arduino, CircuitPython, MicroPython, or ESP-IDF. It's perfect for makers: Sharp’s Memory-in-Pixel (MiP) technology avoids the slow refresh times associated with E-Ink displays A real-time clock (RTC) was added to support timers and alarms The Newt was designed with battery operation in mind; every component on the board was chosen for its ability to operate at low power. Newt was designed to operate 'untethered,' which means it can be mounted in places where a power cord would be inconvenient, for example a wall, refrigerator, mirror, or dry-erase board. With the optional stand, desks, shelves, and nightstands are also good options. Newt is open source, and all design files and libraries are available for review, use, and modification. However, doing that is not required. Each Newt is delivered with working code with the following features: Current weather details Hourly and daily weather forecast Alarm Timer Inspirational quotes Air-quality forecast Habit calendar Pomodoro timer Oblique Strategy cards Only following the Wi-Fi provisioning instructions is needed to get started. No app downloads are required. Specifications Display Sharp Memory LCD Screen Size 2.7 inch Resolution 240 x 400 Deep Sleep Current 30 uA Refresh Rate < 0.001 s Periodic Screen Refresh Required No Input Buttons 10 capacitive pads, 1 push button RTC included Yes Speaker included Yes Power Input USB Type-C Battery included No Programming Languages Arduino, CircuitPython, ESP IDF, MicroPython Dimensions 91 x 61 x 9 mm Microcontroller Espressif ESP32-S2-WROVER Module with 4 MB flash and 2 MB PSRAM Wi-Fi capable Supports Arduino, MicroPython, CircuitPython, and ESP-IDF Deep sleep current as low as 25 μA Display 2.7-inch, 240 x 400 pixel MiP LCD Capable of delivering high-contrast, high-resolution, low-latency content with ultra-low power consumption Reflective mode leverages ambient light to eliminate the need for a backlight Time Keeping, Timers, and Alarms Micro Crystal RV-3028-C7 RTC Optimized for extreme low-power consumption (45 μA) Able to simultaneously manage a periodic timer, a countdown timer, and an alarm Hardware interrupt for timers and alarms 43 bytes of non-volatile user memory, 2 bytes of user RAM Separate UNIX time counter Buzzer Speaker/buzzer with mini class-D amplifier on DAC output A0 can play tones or lo-fi audio clips User Input Power switch Two programmable tactile buttons for Reset and Boot 10 capacitive touchpads Power Newt is designed to operate for one to two months between charges using a 500 mAH LiPo battery. The exact run time varies. (Heavy Wi-Fi use, in particular, will reduce battery charge more quickly.) USB Type-C connector for programming, power, and charging Low-quiescence voltage regulator (TOREX XC6220) that can output 1 A of current and operate as low as 8 μA. JST connector for a Lithium-Ion battery Battery-charging circuity (MCP73831) Low-battery indicator (1 μA quiescence current) Software Newt hardware is compatible with open-source Arduino libraries for ESP32-S2, Adafruit GFX (fonts), Adafruit Sharp Memory Display (display writing), and RTC RV-3028-C7 (RTC) Arduino libraries and sample programs are under development and will be available in our GitHub repository before launch CircuitPython libraries and registration are on the roadmap, with the development of a CircuitPython library for the RV-3028 real-time clock as a key dependency Included Phambili Newt – Fully assembled with pre-loaded firmware Laser-cut desktop stand Mini-magnet feet Required screws Support & Documentation Full instructions for use GitHub: Arduino Library and Codebase GitHub: Board schematics
Videos of prototypes or demos (build tracked on Hackaday)
Circuit Playground Bluefruit is the third board in the Circuit Playground series, another step towards a perfect introduction to electronics and programming. Adafruit has taken the popular Circuit Playground Express and made it even better! Now the main chip is an nRF52840 microcontroller which is not only more powerful, but also comes with Bluetooth Low Energy support for wireless connectivity. The board is round and has alligator-clip pads around it so you don't have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or with a Lipoly battery (for advanced users). Circuit Playground Bluefruit has built-in USB support. Built in USB means you plug it in to program it and it just shows up, no special cable or adapter required. Just program your code into the board then take it on the go! Features 1x nRF52840 Cortex M4 processor with Bluetooth Low Energy support 10x mini NeoPixels, each one can display any color 1x Motion sensor (LIS3DH triple-axis accelerometer with tap detection, free-fall detection) 1x Temperature sensor (thermistor) 1x Light sensor (phototransistor). Can also act as a color sensor and pulse sensor. 1x Sound sensor (MEMS microphone) 1x Mini speaker with class D amplifier (7.5 mm magnetic speaker/buzzer) 2x Push buttons, labeled A and B 1x Slide switch 8x alligator-clip friendly input/output pins Includes I²C, UART, 6 pins that can do analog inputs, multiple PWM outputs Green 'ON' LED so you know its powered Red '#13' LED for basic blinking Reset button 2 MB of SPI Flash storage, used primarily with CircuitPython to store code and libraries. MicroUSB port for programming and debugging USB port can act like serial port, keyboard, mouse, joystick or MIDI! Specifications Outer Diameter: ~50.6 mm / ~2.0' Weight: 8.9 g
Up to 2048 digital PWM LEDs can be comfortably managed and easily controlled by the Diamex LED Player M. Equipped with eight channels, small and even larger projects for party lighting, video boards or professional lighting installations can be implemented quickly. Live videos on a panel surface are possible as well as stored sequences, light moods or effect installations for small and large lighting performances. Applications such as party lighting, home cinema installations, pool lighting, garden and home lighting, moving stores or sophisticated LED lighting solutions indoors or outdoors - all no longer a problem. With the Diamex LED Player M the imagination has no limits. At the same time, the module is small, compact and highly configurable. Via USB, Windows pads or notebooks and PCs can be used as feed players. Free software like JINX! or gLEDiator are perfectly suited for home and professional applications. These sequences can also be stored as a file on a simple mini-SD card and inserted into the Diamex LED Player M, turning the module into a stand-alone light jockey. Simply put, it's a real powerhouse equipped with state-of-the-art Cortex M4 microcontroller technology, a real highlight for professionals and amateurs alike, which can handle a wide variety of strips and matrices and is also future-proof via online firmware update. Specifications LED panel programs like JINX or GLEDIATOR can send their data directly to the Diamex LED Player M via the USB port. Maximum capacity: 512 LEDs per channel, 2048 LEDs in total. Different LED protocols are supported, both for LEDs with only one asynchronous data line (single wire) and LEDs with synchronous DATA and TAKT lines (dual wire). LEDs, Stripes, Panels of the following types are supported: WS2811/12 (compatible UCS1903, PL9823), APA106, WS2821 (DMX), WS2801, APA102, LPD8803/06. Mini-USB 2.0 port for virtual COM port (player for JINX, GLEDIATOR etc.), configuration and updates via bootloader. 2 buttons for sequence control. Screw terminals for LED data outputs and power supply. Fully configurable via PC-Tool: Protocol for PC data, LED protocol, number of connected strips or panels, arrangement of colours in the data stream, length of strips, size of panels and arrangement of LEDs on panels, mirroring, timing parameters of protocols. MicroSD card slot for playing files in TPM2 format even without a PC. SD cards can be read and written directly from a PC as a virtual drive. Status LEDs for system and SD card. Controlled by powerful 32-bit Cortex-M4 microcontroller Board size: 71 x 31mm
The Electric Paint Lamp Kit is a great gift!
Transform any piece of paper into a touch-sensitive lamp with Electric Paint! Make three paper lamps with no tools, no programming, no special skills required.
Included
1x Light Up Board
1x Electric Paint 10ml Tube
1x Micro USB Cable
1x Touch Lamp Template
1x Dimmer Lamp Template
1x Proximity Lamp Template
1x Instruction Test Sheet
Transform a paper template into a beautiful lamp in three easy steps. Paint, plug, and play! Use Electric Paint to create custom touch-sensitive buttons connected to our Light Up Board and then use our lampshades to bring your lamp to life.
LEVEL: Beginner
The Electric Paint Lamp Kit is easy to use and makes a perfect gift. The Touch, Dimmer, and Proximity lamps all show off different aspects of Electric Paint and the Light Up Board and are perfect for your home, office or workshop.
About Electric Paint
Your design and electronics projects are about to change forever with this easy to use electrically conductive paint. Paint circuits or use as a conductive adhesive on almost anything including paper, plastic, textiles and conventional electronics.
About the Light Up Board
The Light Up Board is the heart of the Electric Paint Lamp Kit. It works straight out of the box, is powered by USB and requires no programming or special tools. The board’s six bright LEDs and three different modes provide the light for your lamps and the super easy connector system means that you can create lamps on any sheet material.
Ulanzi TC001 is an LED pixel clock consisting of 256 individual addressable RGB LEDs (8x32) with built-in battery, buzzer, light, temperature and humidity sensor. The integrated rechargeable battery offers a runtime of up to 5 hours. The WiFi connection to the clock is made via an ESP32 chip. Ulanzi TC001 uses an ESP32-WROOM-32D module. Features Pixelated message display Simultaneous Display of the Number of Followers: Fan growth is immediately visible, suitable for YouTube, Bilibili, and Weibo. Pomodoro Clock Design: Manage your own time more scientifically. Explore unlimited possibilities: Multiple programs need to be installed through the control server to achieve more functions. Awtrix Makes it Better: Awtrix simulator in TC001’s firmware simulates an Awtrix matrix and allows you to control the clock using a standard Awtrix host. Hi-tech and stunning appearance: Modeling simple atmosphere, LED full-color pixel screen with better imaging. Built-in 4400 mAh battery with up to 5 hours of battery life. Specifications Number of LEDs: 256 (8x32) Operating voltage: 3.7 V Power: 3 W Battery capacity: 4400 mAh Interface: USB-C Dimensions: 200.6 x 70.3 x 31.9 mm Weight: 283 g Inbegrepen Ulanzi TC001 Smart Pixel Clock USB cable Manual Downloads Firmware
The Ynvisible Segment E-Paper Displays are thin & flexible, sunlight readable, very easy to operate, and that they are the most energy-efficient display technology on the market for most applications. Get started today! Evaluate the ultra-low-power, thin and flexible Segment E-Paper Displays. The kit contains display designs and includes a manual display driver as well as a display driver with I²C interface. Display parameters White Reflectance 40% Contrast Ratio (Yb/Yd) 1:3 Angle Dependency No, lambertian Thickness 300 µm Graphical layout Segments Segment dimensions 1-100 mm Response time 100-1000 ms Power parameters Driving voltage 1.5 V Driving method Direct drive Energy consumption 1 mJ/cm^2 Pulse energy 0.25 mJ/cm^2 Image retention w/o power 1-5 minutes Operating conditions -20°C - +60°C Activations/Cycles 1.000.000 Included
Ynvisible Segment Displays (Segmented e-paper displays with different layouts, shapes, and symbols, suitable for testing and evaluation.) 3 single-digit display 1 double-digit display 5 single-segment/icon displays 4 progress bars (7-segment and 3-segment)
Manual Display Clicker (Manual display controller for ON/OFF operations)
Display Driver and Software Library (Dedicated display driver with I²C communication interface. Compatible with Arduino and other easy-to-use development boards.)
Flexible Display Adapter (For convenient connection of the flexible displays on a plastic substrate to rigid electronics (such as development boards), using a FFC/FPC connector.) Downloads Datasheet Guide & Instructions
Resolution 1920 x 1080 Screen Size 13.3' Refresh Rate 60 Hz Contrast 800:1 Brightness 300 nit Screen Type TFT IPS LCD Backlight LED Backlight Color Gamut 16.7M, NTSC 72%, sRGB up to 100% Speaker Double Speaker Viewing Angle 178 ° Aspect Ratio 16:9 Power Supply 5 - 20 V or Type-C USB 3.0 Inputs Mini HDMI, Type-C, Voltage Input Outputs 3.5 mm Jack Plug Operating Temperature 0 °C - 50°C Case Aluminum Alloy Dimensions 313 mm x 198 mm x 10 mm Weight 1010 g Included Joy-View 13 Display Smart Case 1.5m HDMI to mini-HDMI cable 1m Type-C to Type-C cable 1m USB-A to USB-C cable Power Adapter HDMI to mini -DMI adapter Cleaning Towel
Grove LED Bar is comprised of a 10 segment LED gauge bar and an MY9221 LED controlling chip. It can be used as a indicator for remaining battery life, voltage, water level, music volume or other values that require a gradient display. There are 10 LED bars in the LED bar graph: one red, one yellow, one light green, and the rest green. Demo code is available to get you up and running quickly. It lights up the LEDs sequentially from red to green, so the entire bar graph is lit up in the end. Want to go further? Go ahead and code your own effect! Features Each LED segment can be controlled individually via code Grove module Plug-and-play Can be cascaded for a larger display Flexible power option, supports 3-5.5 DC Available demo code Dimensions: 40 x 20 x 18 mm
Included 1x Grove LED Bar v2.0 1x Grove Cable Downloads Grove LED Bar Eagle File Grove LED Bar Library MY9221 Datasheet Suli-compatible Library GitHub repository for LED Bar 10 Segment LED Gauge Bar
The Picoboy is a powerful mini handheld measuring just 3 x 5 cm. It is suitable for learning programming, developing your own games or simply playing with it. An introduction to programming with the Arduino IDE and MicroPython is available. All you need is a PC, the PicoBoy and a USB-C cable. As the PicoBoy is compatible with the Raspberry Pi Pico and the Arduino IDE, there are countless other tutorials, examples and libraries on the internet to make programming easier. Specifications 1.3' OLED display with 128 x 64 pixels (black/white) RP2040 microcontroller makes it compatible with the Raspberry Pi Pico 2x 133 MHz ARM M0+ 2 MB Flash 264 KB RAM USB-C interface for programming and data transfer 3 Pre-installed games 5-way joystick Acceleration sensor (can now also be used in Python!) Power supply via USB-C or a CR2032 button cell Dimensions: 49,2 x 29,1 x 14,5 mm Downloads GitHub
Subtle diffusion makes the pixels extra-shiny by blurring the gaps. This improvement is obtained with a diffuser secured slightly away from the HAT. Unicorn HAT was hailed by raspberrypi.org for its versatility and row power with a score of 5/5! Features 256 RGB LED pixels in a 16x16 matrix Pixels driven by ARM STM32F and three STP16CPC26 LED drivers Bundled ninja diffuser (with nuts and bolts) Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W Comes fully assembled
This 10.1-inch HDMI touch screen has a high-definition resolution of 1280x800 and supports a viewing angle of 178°, providing an excellent visual experience. It supports Raspberry Pi, Windows, Linux, Ubuntu and other systems, and is also compatible with Raspberry Pi 3/3B+/4B/5, Jetson Nano, Beaglebone, Banana Pi and other mainstream development boards. You can easily adjust the desired brightness by adjusting the backlight button.
This Raspberry Pi capacitive touch screen supports 5-point touch, has fast response speed, and high-definition communication supports plug-and-play.It comes with a stand for easy desktop placement, and mounting holes on the back allow you to securely mount it on a wall or integrate it with a small form factor SBC (single board computer).
To protect the screen and enhance its visual appeal, the monitor comes with a durable and stylish acrylic cover.
Whether you need a high-quality monitor for gaming, multimedia entertainment, or industrial applications, our 10-inch monitors offer superior visuals, responsive touch controls, seamless connectivity, and versatile mounting options.
Features
IPS HD 1280x800 resolution and 178° full viewing angle offers crystal clear visuals and vivid colors for high-quality visual experience
Support backlight control, itcan be adjusted by button
Support capacitive 5-point touch, enable smooth, accurate and fast response
Use HD communication, plug and play, and easy to use
Support Windows, Linux, Ubuntu, Kodi, etc.
Compatible with Raspberry Pi 3/3B+/4B/5, Jetson Nano, Beaglebone
Specifications
Screen Size
10.1 inch
Screen Type
IPS screen
Resolution
1280 x 800
Backlight adjustment
Key switch adjustment
Touch Screen Type
Capacitive Touch Screen
Touch IC
SIS9200
Power
Micro-USB (5 V)
Overall power
5.2942 W (100% brightness)
Video Input Interface
HDMI-Compatible (up to 1080p)
Active Area
216.6 x 135.4 mm
Dimensions (L x W x H)
239.4 x 157.4 x 12.3 ±0.2 mm
Included
1x 10.1 inch Touch Display
1x HD to HD Cable
2x USB cable
1x HD to Mini HD Adapter
1x Screw Pack
2x Bracket
1x Screwdriver
1x Manual
Downloads
Manual
Wiki
