OWON HDS2102s (3-in-1) 2-ch Oscilloscope (100 MHz) + Multimeter + Signal Generator

  • BrandOWON

Description

The OWON HDS2102s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth of 100 MHz, multimeter and signal generator. It features a high-contrast 3.5-inch color display suitable for outdoor facility maintenance, rapid on-site measurement, automobile maintenance, power detection. etc.

Features

  • Oscilloscope + multimeter + waveform generator, multifunction in one
  • 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
  • 18650 lithium battery, can work continuously for 3-6 hours
  • USB Type-C interface, support power bank, support PC software connection
  • Self-calibration function
  • SCPI supported, facilitate secondary development

Specifications

Bandwidth 100 MHz
Channels 2-ch Oscilloscope + 1-ch Generator
Sample Rate 500 MSa/s
Acquisition Model Normal, Peak detect
Record Length 8K
Display 3.5-inch LCD
Waveform Refresh Rate 10,000 wfrms/s
Input Coupling DC, AC, and Ground
Input Impedance 1 MΩ ±2%, in parallel with 16pF ±10pF
Probe Attenuation Factors 1X,10X,100X,1000X,10000X
Max. input Voltage 400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation)
Bandwidth Limit (typical) 20 MHz
Horizontal Scale 2ns/div - 1000s/div, step by 1 - 2 - 5
Vertical Sensitivity 10mV/div - 10V/div
Vertical Resolution 8 bits
Trigger Type Edge
Trigger Modes Auto, Normal, single
Automatic Measurement Frequency, Period, Amplitude, Max, Min, Mean, PK-PK
Cursor Measurement ΔV, ΔT, ΔT&ΔV between cursors
Communication Interface USB-C

Multimeter Specifications

Max. Resolution 20,000 counts
Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test
Input Impedance 10 MΩ
Max Input Voltage AC 750 V, DC 1000 V
Max Input Current DC: 10 A, AC: 10 A
Diode 0-2 V

Waveform Generator Specifications

Frequency Output Sine 0.1 Hz - 25 MHz
Square 0.1 Hz - 5MHz
Ramp 0.1 Hz - 1 MHz
Pulse 0.1 Hz - 5 MHz
Arbitrary 0.1 Hz - 5 MHz
Sampling Rate 125 MSa/s
Channel 1-ch
Amplitude Range (high impedance) 20 mVpp - 5 Vpp
Waveform Length 8K
Vertical Resolution 14 bits
Output Impedance 50Ω

Included

  • 1x OWON HDS2102s
  • 1x Power adapter
  • 1x USB cable
  • 1x Passive probes
  • 2x Crocodile clip cable
  • 1x Set of multimeter probes (one red and one black)
  • 1x User manual
  • 1x Probe correction adjustment knife

Downloads

Product form

The OWON HDS2102s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth... Read more

Out of stock

€ 249,00 € 189,95 (incl. VAT)
Members identical

    Details

    SKU: 20503
    EAN: 020503

    Description

    The OWON HDS2102s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth of 100 MHz, multimeter and signal generator. It features a high-contrast 3.5-inch color display suitable for outdoor facility maintenance, rapid on-site measurement, automobile maintenance, power detection. etc.

    Features

    • Oscilloscope + multimeter + waveform generator, multifunction in one
    • 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
    • 18650 lithium battery, can work continuously for 3-6 hours
    • USB Type-C interface, support power bank, support PC software connection
    • Self-calibration function
    • SCPI supported, facilitate secondary development

    Specifications

    Bandwidth 100 MHz
    Channels 2-ch Oscilloscope + 1-ch Generator
    Sample Rate 500 MSa/s
    Acquisition Model Normal, Peak detect
    Record Length 8K
    Display 3.5-inch LCD
    Waveform Refresh Rate 10,000 wfrms/s
    Input Coupling DC, AC, and Ground
    Input Impedance 1 MΩ ±2%, in parallel with 16pF ±10pF
    Probe Attenuation Factors 1X,10X,100X,1000X,10000X
    Max. input Voltage 400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation)
    Bandwidth Limit (typical) 20 MHz
    Horizontal Scale 2ns/div - 1000s/div, step by 1 - 2 - 5
    Vertical Sensitivity 10mV/div - 10V/div
    Vertical Resolution 8 bits
    Trigger Type Edge
    Trigger Modes Auto, Normal, single
    Automatic Measurement Frequency, Period, Amplitude, Max, Min, Mean, PK-PK
    Cursor Measurement ΔV, ΔT, ΔT&ΔV between cursors
    Communication Interface USB-C

    Multimeter Specifications

    Max. Resolution 20,000 counts
    Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test
    Input Impedance 10 MΩ
    Max Input Voltage AC 750 V, DC 1000 V
    Max Input Current DC: 10 A, AC: 10 A
    Diode 0-2 V

    Waveform Generator Specifications

    Frequency Output Sine 0.1 Hz - 25 MHz
    Square 0.1 Hz - 5MHz
    Ramp 0.1 Hz - 1 MHz
    Pulse 0.1 Hz - 5 MHz
    Arbitrary 0.1 Hz - 5 MHz
    Sampling Rate 125 MSa/s
    Channel 1-ch
    Amplitude Range (high impedance) 20 mVpp - 5 Vpp
    Waveform Length 8K
    Vertical Resolution 14 bits
    Output Impedance 50Ω

    Included

    • 1x OWON HDS2102s
    • 1x Power adapter
    • 1x USB cable
    • 1x Passive probes
    • 2x Crocodile clip cable
    • 1x Set of multimeter probes (one red and one black)
    • 1x User manual
    • 1x Probe correction adjustment knife

    Downloads

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot password?

    Don't have an account yet?
    Create account