The OWON XDM1141 is a fast. high-precision digital True RMS benchtop multimeter with a high-resolution 3.5-inch LCD and 50.000 counts. Its DC voltage accuracy is up to 0.05% and it can measure up to 65 values per second.
Features
3.5" high-resolution LCD (480x320 pixels)
55000 counts. DC voltage accuracy up to 0.05%
Up to 65 readings per second
Dual line display supported
Trend analysis accessible in chart mode
AC True RMS measurements (bandwidth: 20 Hz ? 1 kHz)
SCPI support: Remote control the multimeter through PC software via USB port
Data record function. you can record the measured data into internal memory. and then read and process the recorded data with your computer.
Specifications
Measurement Range
Resolution
Accuracy
DC Voltage
50.000 mV
0.001 mV
0.1% +10
500.00 mV
0.01 mV
0.05% +5
5.0000 V
0.0001 V
0.05% +5
50.000 V
0.001 V
0.05% +5
500.00 V
0.01 V
0.1% +5
1000.0 V
0.1 V
0.1% +10
AC Voltage
500 mV?750 V
20 Hz?45 Hz
1% +30
45 Hz?65 Hz
0.5% +30
65 Hz?1 KHz
0.7% +30
DC Current
500 uA
0.01 uA
0.15% +20
5000 uA
0.1 uA
0.15% +10
50 mA
0.001 mA
0.15% +20
500 mA
0.01 mA
0.15% +10
5 A
0.0001 A
0.5% +10
10 A
0.001 A
0.5% +10
AC Current
500 uA?500 mA
20 Hz?1 KHz
0.5% +20
5 A-10 A
1.5% +20
Resistance
500 ?
0.01 ?
0.15% +10
5 K?
0.0001 K?
0.15% +5
50 K?
0.001 K?
0.15% +5
500 K?
0.01 K?
0.15% +5
5 M?
0.0001 M?
0.3% +5
50 M?
0.001 M?
1% +10
Frequency
10.000 Hz?60 MHz
/
±(0.2% +10)
Capacitance
50 nF?500 uF
/
2.5% +10
5 mF?50 mF
5% +10
Diode
3.0000 V
0.0001 V
/
Continuity
1000 ?
0.1 ?
Adjustable threshold
Temperature
K type. PT100
Max Display
55.000 counts
Data-logging Function
Logging Duration
15ms?9999.999s
Logging Length
1.000 points
Display
3.5' TFT LCD (480x320 pixels)
Dimensions
200 x 88 x 150 mm
Weight
approx. 0.5 kg
Included
1x OWON XDM1141 Multimeter
1x Power cord
2x Test leads
1x Fuse
1x USB cable
1x Manual
Downloads
Programming Manual
PC Software
The OWON XDM2041 is a low-cost, high-precision benchtop multimeter. The meter has a True RMS function to measure the AC voltage and current and it has a reading speed of up to 65 values per second. Also, the XDM2041 is equipped with functions such as measuring 2-wire and 4-wire resistance.
The XDM2041 is able to store data internally in the memory of the meter and display it on the 3.7" high-resolution LCD display. Up to 1000 points can be stored and the time interval can be varied from 15ms to 9999s. By means of the RS232 port on the back of the device, the meter can be programmed and controlled via SCPI.
Specifications
Measurement Range
Resolution
Accuracy ±(% of reading + LSB)
DC Voltage
50.000mV
0.001mV
0.1%+10
500.00mV
0.01mV
0.025%+5
5.0000V
0.0001V
0.025%+5
50.000V
0.001V
0.03%+5
500.00V
0.01V
0.1%+5
1000.0V
0.1V
0.1%+5
AC Voltage
500mv-750v
20Hz~45Hz
1%+30
45Hz~65Hz
0.5%+30
65Hz~1KHz
0.7%+30
DC Current
500uA
0.01uA
0.15%+20
5000uA
0.1uA
0.15%+10
50mA
0.001mA
0.15%+20
500mA
0.01mA
0.15%+10
5A
0.0001A
0.5%+10
10A
0.001A
0.5%+10
AC Current
500uA-500mA
20 Hz-1 kHz
0.5%+20
5A-10A
1.5%+20
Resistance
500Ω
0.01Ω
0.1%+10
5KΩ
0.0001KΩ
0.1%+5
50KΩ
0.001KΩ
0.1%+5
500KΩ
0.01KΩ
0.1%+5
5MΩ
0.0001MΩ
0.25%+5
50MΩ
0.001MΩ
0.1%+10
Four-wire resistance
500Ω
0.01Ω
0.1%+10
5KΩ
0.0001KΩ
0.1%+5
50KΩ
0.001KΩ
0.1%+5
Measurement Range
Resolution
Accuracy ±(% of reading + % of range)
Frequency
10.000Hz-60MHz
/
±(0.2%+8)
Capacitance
50nF-500uF
/
2.5%+5
5mF-50mF
5%+8
Diode
3.0000 V
0.0001V
/
Continuity
1000 Ω
0.1Ω
/
Temperature
K type，PT100
Display
55,000
Data-logging Function
Logging Duration
15ms-9999s
Logging Length
1,000 points
Included
1x OWON XDM2041 Multimeter
2x Multimeter leads
2x Alligator clips
1x Fuse
1x Manual
Downloads
User manual
Programming manual
PC software
The OWON XDM1041 is a fast, high-precision digital True RMS benchtop multimeter with a high-resolution 3.5-inch LCD and 50,000 counts. Its DC voltage accuracy is up to 0.05% and it can measure up to 65 values per second.
Features
3.5“ high-resolution LCD (480x320 pixels)
55000 counts, DC voltage accuracy up to 0.05%
Up to 65 readings per second
Dual line display supported
Trend analysis accessible in chart mode
AC True RMS measurements (bandwidth: 20 Hz – 1 kHz)
SCPI support: Remote control the multimeter through PC software via USB port
Data record function, you can record the measured data into internal memory, and then read and process the recorded data with your computer.
Specifications
Measurement Range
Resolution
Accuracy
DC Voltage
50.000 mV
0.001 mV
0.1% +10
500.00 mV
0.01 mV
0.05% +5
5.0000 V
0.0001 V
0.05% +5
50.000 V
0.001 V
0.05% +5
500.00 V
0.01 V
0.1% +5
1000.0 V
0.1 V
0.1% +10
AC Voltage
500 mV～750 V
20 Hz～45 Hz
1% +30
45 Hz～65 Hz
0.5% +30
65 Hz～1 KHz
0.7% +30
DC Current
500 uA
0.01 uA
0.15% +20
5000 uA
0.1 uA
0.15% +10
50 mA
0.001 mA
0.15% +20
500 mA
0.01 mA
0.15% +10
5 A
0.0001 A
0.5% +10
10 A
0.001 A
0.5% +10
AC Current
500 uA～500 mA
20 Hz～1 KHz
0.5% +20
5 A-10 A
1.5% +20
Resistance
500 Ω
0.01 Ω
0.15% +10
5 KΩ
0.0001 KΩ
0.15% +5
50 KΩ
0.001 KΩ
0.15% +5
500 KΩ
0.01 KΩ
0.15% +5
5 MΩ
0.0001 MΩ
0.3% +5
50 MΩ
0.001 MΩ
1% +10
Frequency
10.000 Hz～60 MHz
/
±(0.2% +10)
Capacitance
50 nF～500 uF
/
2.5% +10
5 mF～50 mF
5% +10
Diode
3.0000 V
0.0001 V
/
Continuity
1000 Ω
0.1 Ω
Adjustable threshold
Temperature
K type, PT100
Max Display
55,000 counts
Data-logging Function
Logging Duration
15ms～9999.999s
Logging Length
1,000 points
Display
3.5“ TFT LCD (480x320 pixels)
Power supply
230 V AC mains voltage
Dimensions
200 x 88 x 150 mm
Weight
approx. 0.5 kg
Included
1x OWON XDM1041 Multimeter
1x Power cord
2x Test leads
1x Fuse
1x USB cable
1x Manual
Downloads
Programming Manual
PC Software
The OWON XDM1241 is a fast, high-precision digital True RMS benchtop multimeter with a high-resolution 3.5-inch LCD and 50,000 counts. Its DC voltage accuracy is up to 0.05% and it can measure up to 65 values per second.
Features
3.5' high-resolution LCD (480x320 pixels)
55000 counts, DC voltage accuracy up to 0.05%
Up to 65 readings per second
Dual line display supported
Trend analysis accessible in chart mode
AC True RMS measurements (bandwidth: 20 Hz – 1 kHz)
SCPI support: Remote control the multimeter through PC software via USB port
Data record function, you can record the measured data into internal memory, and then read and process the recorded data with your computer.
Specifications
Measurement Range
Resolution
Accuracy
DC Voltage
50.000 mV
0.001 mV
0.1% +10
500.00 mV
0.01 mV
0.05% +5
5.0000 V
0.0001 V
0.05% +5
50.000 V
0.001 V
0.05% +5
500.00 V
0.01 V
0.1% +5
1000.0 V
0.1 V
0.1% +10
AC Voltage
500 mV～750 V
20 Hz～45 Hz
1% +30
45 Hz～65 Hz
0.5% +30
65 Hz～1 KHz
0.7% +30
DC Current
500 uA
0.01 uA
0.15% +20
5000 uA
0.1 uA
0.15% +10
50 mA
0.001 mA
0.15% +20
500 mA
0.01 mA
0.15% +10
5 A
0.0001 A
0.5% +10
10 A
0.001 A
0.5% +10
AC Current
500 uA～500 mA
20 Hz～1 KHz
0.5% +20
5 A-10 A
1.5% +20
Resistance
500 Ω
0.01 Ω
0.15% +10
5 KΩ
0.0001 KΩ
0.15% +5
50 KΩ
0.001 KΩ
0.15% +5
500 KΩ
0.01 KΩ
0.15% +5
5 MΩ
0.0001 MΩ
0.3% +5
50 MΩ
0.001 MΩ
1% +10
Frequency
10.000 Hz～60 MHz
/
±(0.2% +10)
Capacitance
50 nF～500 uF
/
2.5% +10
5 mF～50 mF
5% +10
Diode
3.0000 V
0.0001 V
/
Continuity
1000 Ω
0.1 Ω
Adjustable threshold
Temperature
K type, PT100
Max Display
55,000 counts
Data-logging Function
Logging Duration
15ms～9999.999s
Logging Length
1,000 points
Display
3.5' TFT LCD (480x320 pixels)
Power supply
Lithium battery via USB-C or 5 V DC input
Dimensions
235 x 88 x 65 mm
Weight
approx. 0.5 kg
Included
1x OWON XDM1241 Multimeter
2x Test leads
1x USB cable
1x USB to DC cord
1x Manual
Downloads
Programming Manual
PC Software
Features
4 1/2 bit resolution (20000 Counts)
Data Logger
Multimeter
Thermometer
True RMS test supported
BLE 4.0 wireless transmission, more stable,less power consumption
Build-in offline record function
Chart and Diagram mode helps to analyze the data tendency
Flashlight function lightens the darkness
Support NCV non-contact voltage sense
Widely supported on Android, iOS, Windows
Included
OWON OW18E Multimeter
Quick Guide
Multimeter Lead
K-type Thermocouple
Bolt Driver
App Download
The Bluetooth function of this multimeter is compatible with Android-app version 1.5.8.0 or newer.
Use the QR code in the box or go to http://files.owon.com.cn/bluetooth.
The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions.
As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness.
In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.
Through these many technical qualities, this device is suitable for the outdoor use of every electrician, technician and engineer in the service, construction or industrial sector.
Features
Automatic illuminated functions keys and rotary switch
Integrated powerful LED Flashlight
Bleutooth 4.0 interface for data transfer to Android or iOS smartphones
TrueRMS measurement
ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z)
3 5/6-digits measurement value display (max. 5999)
LCD-Display with Relative-value measurement and 42-segment bargraph
Continuity with buzzer and diode-test
Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %)
Heavy Duty Case, IP67 dust- and waterproof
Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
Accessories: Carrying case, Test Leads, K-type
Specifications
DCV
600 mV / 6 / 60 / 600 / 1000 V +/-0,8% + 5 dgt.
ACV + DCV @ 10 MΩ
6 / 60 / 600 / 1000 V +/-1,5% + 20 dgt.
ACV + DCV @ 3 kΩ (LO Z)
6 / 60 / 600 / 1000 V +/-3% + 30 dgt.
ACV + DCV Frequency range
50 Hz … 400 Hz
ACV
6 / 60 / 600 / 1000 V +/-1% + 5 dgt.
ACV Frequency range
50 Hz … 1000 Hz
DCA
600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt.
ACA
600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt.
ACA Frequency range
50 Hz … 400 Hz
Ohm
600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,5% + 5 dgt.
Capacitance
60 / 600 nF / 6 / 60 / 600 / 6000 µF +/-3% + 5 dgt.
Frequency
10 Hz … 10 kHz +/- 1,0% + 5 dgt.
Temperature
20.0 °C … +760 °C +/-1,0% + 5 °C
Interface
Bluetooth 4.0 Low Energy
Operating Voltage
4 x 1,5 V AAA Batteries
Dimensions (WxHxD)
75 x 170 x 50 mm
Weight
400 g
The PCW03A True RMS digital multimeter is an innovative tool for any electrician. technician. or ambitious hobbyist. It can measure AC/DC voltage. current. and resistance. as well as frequency. duty ratio. and temperature.
Due to its smart measurement function. the PCW03A detects the inteded measurement (continuity. voltage. resistance) and chooses the correct measurement range/function for the user. making super easy to use and beginner-friendly. Another great feature of the device. especially for beginners. are the illuminated input sockets. Here the device indicates which input sockets to use for the chosen measurement function. This way it is almost impossible to connect the measurement leads to the wrong socket and it will prevent the device from damage.
With its 9999 counts and bright colors. the HD display provides precise measurement read-outs. Additionally. the CAT III 1000V; CAT IV 600V rating ensures safety while in use for various applications. Its smartphone-like design is easy and intiutive to use. making it a joy for daily operations. The double insulation. ceramic fuse. and removable rubber casing provide durability and protection for device and the user.
Features
CAT III 1000 V; CAT IV 600 V
9999 counts & True RMS
Auto Range & smart measurement function: device automatically recognizes intended measurement (continuity. voltage. resistance) and chooses correct measurement range/function
LED illuminated input sockets ? the device shows you which input socket to use according to the measurement function chosen. Perfect for beginners to avoid damage to the device.
AC/DC voltage. AC/DC current. resistance. capacitance. frequency. duty ratio. and temperature measurement
NCV (non-contact voltage detection). live line. continuity. and diode test
Double insulation & ceramic fuses
Removable rubber casing with cushioning function for extra protection
Large colour HD display with backlight
Data hold with Min/Max function
LED work light
Innovative design and 5 button operating concept: like a smartphone
Manual in various languages: EN. GER. ES. FR. PT. IT. GR
Dimensions: 165 x 85 x 25 mm
Weight: 255 g
Included
PCW03A Multimeter
Batteries
High-quality test leads
K-type temp. probes
Transport case
Downloads
Datasheets
The PeakTech 3350 was specially developed for use in the craftsmanship and industry and offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight, which is used to illuminate the area where the measurement has to be taken. A multi-colored LED bar is located above the 6000-digit display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is found in NCV mode, yellow when measuring large capacities or flashes red when the phase tester mode is active (LIVE).
The PeakTech 3350 was manufactured according to the latest development aspects and has a double-insulated injection-molded housing with rubber coating, a tilt stand on the back, which can be removed to replace the batteries. The fuses are located underneath the stand as well, if it is neccessary to replace these. With this device the measuring range is selected automatically, which enable particularly fast response times.
Features
True RMS voltage up to 600 V and current up to 10 A AC/DC
6,000 LCD display with automatic backlight
Multi-colored warning LED for various measuring functions
Automatic range selection
Manual range selection possible using selection buttons
Integrated LED flashlight for lighting the area where the measurement has to be taken
Auto off and battery status display
Safety: EN 61010-1; CAT III 600 V
Accessories: bag, test leads, temperature sensor, temperature adapter, batteries and user manual
Specifications
Basic Accuracy DC
±0.5%
Battery
1.5 V AAA
Capacitance max.
60 mF
Digital counts
6000
Display Type
LCD
Info LEDs
■
LED lamp
■
NCV
■
Over voltage category
CAT III 600 V
Range selection
Auto
True RMS
■
V DC max.
600 V
A AC max.
10 A
Hz max.
10 MHz
OHM max.
60 MΩ
Temp. max.
1000°C
Temp. min.
-18°C
mA DC max.
600 mA
mV DC max.
600 mV
µA DC max.
6000 µA
V AC max.
600 V
mV AC max.
600 mV
A DC max.
10 A
mA AC max.
600 mA
µA AC max.
6000 µA
Downloads
Manual
The PeakTech 1073 smart digital multimeter combines state-of-the-art technology with an impressive range of functions in a compact design. It measures voltages up to 600 V AC/DC, is CAT III certified and features True RMS for precise measurements with varying voltages. The integrated NCV voltage tester enables non-contact voltage detection, while the LIVE test reliably identifies phases and neutral conductors.
Thanks to the automatic search of the measuring function, you no longer need a rotary selector switch. The multimeter automatically recognizes what is being measured and adjusts itself accordingly. The 4000-digit LCD display with blue backlighting ensures clear readability of the measured values and changes to red when measuring ranges are exceeded or the NCV voltage tester detects a voltage.
In addition to the standard measurements for voltage, current (AC & DC), resistance, continuity, diode test and temperature, this multimeter also offers capacitance and frequency measurements.
Features
Smart True RMS multimeter with automatic function selection
Manual function selection possible at the touch of a button
3¾ digit LCD display with 4,000 counts
Backlight (blue/red) and LED light
Continuity test and diode test function
Capacitance, temperature & frequency measurement
Live test and NCV voltage tester
Auto-Power-Off and battery status indicator
Sturdy ABS plastic housing
Safety: EN 61010-1, CAT III 600 V
Specifications
Digital counts
4000
Basic Accuracy DC
±0.5%
Over voltage category
CAT III 600 V
Display Type
LCD
Range selection
Auto
Auto-Scan
Yes
LED-lamp
Yes
NCV
Yes
True RMS
Yes
V DC max.
600 V
A AC max.
10 A
Hz max.
4 kHz
Capacitance max.
1 mF
OHM max.
40 MΩ
Temp. max.
1200°C (2192°F)
Temp. min.
−200°C (−328°F)
mA DC max.
4000 mA
V AC max.
600 V
A DC max.
10 A
mA AC max.
4000 mA
Power supply
2x 1.5 V AAA batteries
Dimensions
130 x 63 x 35 mm
Weight
116 g (incl. batteries)
Included
1x PeakTech 1073 Multimeter
2x Test leads
1x Thermocouple
2x Batteries
1x Manual
Downloads
Manual
The FNIRSI S1 portable digital multimeter can accurately measure AC/DC voltage, resistance, NCV, diode, continuity, capacitance, temperature, frequency and live wire. It is a really useful tool for solving electrical issues in industry and the home. It is suitable for household sockets, fuses, batteries (including vehicles), troubleshooting automotive circuits, charging systems, testing electronics in cars, etc.
Smart Multimeter
The multimeter can automatically detect AC/DC voltage, resistance and continuity, which is suitable for both beginners and professionals.
Specifications
AC voltage
0~1000 V
±(0.8% +3)
DC voltage
0~1000 V
±(0.8% +3)
Resistance
0~100 MΩ
±(1.2% +3)
Capacitance
0 nF~10 mF
±(4.5% +5)
Frequency
0 Hz~10 Mhz
±(0.1% +3)
Temperature
−20~1000°C
±(2% +5)
Diode
Yes
Automatic OFF
Yes
Lighting
Yes
On-off buzzer
Yes
Auto range
Yes
NCV induced voltage
Yes
Live mode
Yes
Data hold
Yes
Analog
Yes
Low voltage indication
Yes
Max range
9999 counts
Valid value
50 Hz~1 kHz
Material
ABS
Display
VA color screen
Power supply
via USB-C (1000 mA rechargeable lithium battery)
Dimensions
143 x 75 x 19 mm
Weight
135 g
Included
FNIRSI S1 Multimeter
Tip table pen
Temperature probe
USB cable
Manual
Downloads
Manual
