LabNation SmartScope USB Oscilloscope

Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS (with WiFi bridge). Connect the SmartScope to pretty much any device!

Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes.

With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second.

The Software for the support of Windows / macOS) / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given.

Features

  • Channel sampled at 100 MHz/s each
  • AC/DC coupling on analog inputs
  • 100% silent
  • 64 Mbit RAM: x10000 zoom
  • Arbitrary Waveform Generator
  • 8 digital inputs at 100 MS/s each
  • 4 digital outputs at 100 MS/s each
  • Externally power your scope in case your mobile can't supply the juice.

Specifications

Oscilloscope
Bandwidth 30 MHz (-3 dB point)
Sample rate 2x 100 MS/s
Channels 2
Max pre-trigger position 16x full scale
Max post-trigger position Full scale
Max full voltage scale 10 V/div (±35 V input range)
Min full voltage scale 20 mV/div
Analog input range -35 V, +35 V
Max input peak-to-peak 40 V
Signal coupling AC / DC
Precision 8 bit
Input impedance 1 MΩ // 10 pF
Waverforms 200 waveforms/s
Data delay to host < 10 ms
Sample depth Up to 4 million samples per channel
External trigger Yes
Logic Analyzer
Input channels 8
Input impedance 100 kOhm // 2 pF to GND
Sample rate 100 MS/s
Logic level 1.8 V to 5.0 V
Diode protection Bidirectional
Input data buffer 4 million samples
Waverforms 200 waveforms/s
Data delay to host < 10 ms
Protocol decoders I²C, SPI, UART, I²S integrated User extensible
Wave Generator (Analog Output)
Output channels 1
Data rate Up to 50 MS/s
Output level 0-3.3 V (Opamp driven)
Output buffer Up to 2048 samples
Max slew rate 30 ns/V
Step 13 mV
Wave Generator (Digital Output)
Channels 4
Data rate Up to 100 MS/s
Output level 3.3 V or 5 V (selectable)
Output buffer Up to 2048 samples
Diode protected Yes
Programmable Logic
USB controller MicroChip PIC18F14K50
USB interface PicKit3 or USB flashable
FPGA Xilinx Spartan 6
FPGA interface JTAG and USB flashable
Size & Weight
Dimensions (L x W x D) 4.33 x 2.52 x 0.95" (110 x 64 x 24.2 mm)
Weight 158 g
Case Aluminium
Connectivity
Device/Host mini USB included
Record waveforms Store Matlab (.mat) or Excel (.csv) files through Dropbox
Analog BNC 2 probes included
Digital 8x 0.1" pitch, probes (included)
Sync USB micro B-B
Power USB micro B (optional)

Included

  • 1x SmartScope USB Oscilloscope
  • 2x Analog probes
  • 1x Digital probe cable
  • 1x Mini-B USB cable

Downloads

Product form

Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS... Read more

SKU: 17169
EAN: 0705184339341

$266.00$167.00 incl. VAT
Members identical

      Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS (with WiFi bridge). Connect the SmartScope to pretty much any device!

      Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes.

      With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second.

      The Software for the support of Windows / macOS) / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given.

      Features

      • Channel sampled at 100 MHz/s each
      • AC/DC coupling on analog inputs
      • 100% silent
      • 64 Mbit RAM: x10000 zoom
      • Arbitrary Waveform Generator
      • 8 digital inputs at 100 MS/s each
      • 4 digital outputs at 100 MS/s each
      • Externally power your scope in case your mobile can't supply the juice.

      Specifications

      Oscilloscope
      Bandwidth 30 MHz (-3 dB point)
      Sample rate 2x 100 MS/s
      Channels 2
      Max pre-trigger position 16x full scale
      Max post-trigger position Full scale
      Max full voltage scale 10 V/div (±35 V input range)
      Min full voltage scale 20 mV/div
      Analog input range -35 V, +35 V
      Max input peak-to-peak 40 V
      Signal coupling AC / DC
      Precision 8 bit
      Input impedance 1 MΩ // 10 pF
      Waverforms 200 waveforms/s
      Data delay to host < 10 ms
      Sample depth Up to 4 million samples per channel
      External trigger Yes
      Logic Analyzer
      Input channels 8
      Input impedance 100 kOhm // 2 pF to GND
      Sample rate 100 MS/s
      Logic level 1.8 V to 5.0 V
      Diode protection Bidirectional
      Input data buffer 4 million samples
      Waverforms 200 waveforms/s
      Data delay to host < 10 ms
      Protocol decoders I²C, SPI, UART, I²S integrated User extensible
      Wave Generator (Analog Output)
      Output channels 1
      Data rate Up to 50 MS/s
      Output level 0-3.3 V (Opamp driven)
      Output buffer Up to 2048 samples
      Max slew rate 30 ns/V
      Step 13 mV
      Wave Generator (Digital Output)
      Channels 4
      Data rate Up to 100 MS/s
      Output level 3.3 V or 5 V (selectable)
      Output buffer Up to 2048 samples
      Diode protected Yes
      Programmable Logic
      USB controller MicroChip PIC18F14K50
      USB interface PicKit3 or USB flashable
      FPGA Xilinx Spartan 6
      FPGA interface JTAG and USB flashable
      Size & Weight
      Dimensions (L x W x D) 4.33 x 2.52 x 0.95" (110 x 64 x 24.2 mm)
      Weight 158 g
      Case Aluminium
      Connectivity
      Device/Host mini USB included
      Record waveforms Store Matlab (.mat) or Excel (.csv) files through Dropbox
      Analog BNC 2 probes included
      Digital 8x 0.1" pitch, probes (included)
      Sync USB micro B-B
      Power USB micro B (optional)

      Included

      • 1x SmartScope USB Oscilloscope
      • 2x Analog probes
      • 1x Digital probe cable
      • 1x Mini-B USB cable

      Downloads

      Reviews

      LabNation SmartScope USB-oscilloscoop

      LabNation SmartScope USB Oscilloscope

      4.7 out of 5 stars

      3 have reviewed this product

        Customer Reviews

        Based on 3 reviews Write a review

      Recently viewed products

      Login

      Forgot password?

      Don't have an account yet?
      Create an account