LabNation SmartScope USB Oscilloscope

Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS (with WiFi bridge). Connect the SmartScope to pretty much any device!

Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes.

With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second.

The Software for the support of Windows / macOS) / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given.

Features

  • Channel sampled at 100 MHz/s each
  • AC/DC coupling on analog inputs
  • 100% silent
  • 64 Mbit RAM: x10000 zoom
  • Arbitrary Waveform Generator
  • 8 digital inputs at 100 MS/s each
  • 4 digital outputs at 100 MS/s each
  • Externally power your scope in case your mobile can't supply the juice.

Specifications

Oscilloscope
Bandwidth 30 MHz (-3 dB point)
Sample rate 2x 100 MS/s
Channels 2
Max pre-trigger position 16x full scale
Max post-trigger position Full scale
Max full voltage scale 10 V/div (±35 V input range)
Min full voltage scale 20 mV/div
Analog input range -35 V, +35 V
Max input peak-to-peak 40 V
Signal coupling AC / DC
Precision 8 bit
Input impedance 1 MΩ // 10 pF
Waverforms 200 waveforms/s
Data delay to host < 10 ms
Sample depth Up to 4 million samples per channel
External trigger Yes
Logic Analyzer
Input channels 8
Input impedance 100 kOhm // 2 pF to GND
Sample rate 100 MS/s
Logic level 1.8 V to 5.0 V
Diode protection Bidirectional
Input data buffer 4 million samples
Waverforms 200 waveforms/s
Data delay to host < 10 ms
Protocol decoders I²C, SPI, UART, I²S integrated User extensible
Wave Generator (Analog Output)
Output channels 1
Data rate Up to 50 MS/s
Output level 0-3.3 V (Opamp driven)
Output buffer Up to 2048 samples
Max slew rate 30 ns/V
Step 13 mV
Wave Generator (Digital Output)
Channels 4
Data rate Up to 100 MS/s
Output level 3.3 V or 5 V (selectable)
Output buffer Up to 2048 samples
Diode protected Yes
Programmable Logic
USB controller MicroChip PIC18F14K50
USB interface PicKit3 or USB flashable
FPGA Xilinx Spartan 6
FPGA interface JTAG and USB flashable
Size & Weight
Dimensions (L x W x D) 4.33 x 2.52 x 0.95" (110 x 64 x 24.2 mm)
Weight 158 g
Case Aluminium
Connectivity
Device/Host mini USB included
Record waveforms Store Matlab (.mat) or Excel (.csv) files through Dropbox
Analog BNC 2 probes included
Digital 8x 0.1" pitch, probes (included)
Sync USB micro B-B
Power USB micro B (optional)

Included

  • 1x SmartScope USB Oscilloscope
  • 2x Analog probes
  • 1x Digital probe cable
  • 1x Mini-B USB cable

Downloads

Product form

Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS... Read more

€ 239,00€ 149,95 incl. VAT
Members identical

    • Ship today? Order within Mar 29, 2024 17:00:00 +0100

    Details

    SKU: 17169
    EAN: 0705184339341

    Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS (with WiFi bridge). Connect the SmartScope to pretty much any device!

    Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes.

    With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second.

    The Software for the support of Windows / macOS) / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given.

    Features

    • Channel sampled at 100 MHz/s each
    • AC/DC coupling on analog inputs
    • 100% silent
    • 64 Mbit RAM: x10000 zoom
    • Arbitrary Waveform Generator
    • 8 digital inputs at 100 MS/s each
    • 4 digital outputs at 100 MS/s each
    • Externally power your scope in case your mobile can't supply the juice.

    Specifications

    Oscilloscope
    Bandwidth 30 MHz (-3 dB point)
    Sample rate 2x 100 MS/s
    Channels 2
    Max pre-trigger position 16x full scale
    Max post-trigger position Full scale
    Max full voltage scale 10 V/div (±35 V input range)
    Min full voltage scale 20 mV/div
    Analog input range -35 V, +35 V
    Max input peak-to-peak 40 V
    Signal coupling AC / DC
    Precision 8 bit
    Input impedance 1 MΩ // 10 pF
    Waverforms 200 waveforms/s
    Data delay to host < 10 ms
    Sample depth Up to 4 million samples per channel
    External trigger Yes
    Logic Analyzer
    Input channels 8
    Input impedance 100 kOhm // 2 pF to GND
    Sample rate 100 MS/s
    Logic level 1.8 V to 5.0 V
    Diode protection Bidirectional
    Input data buffer 4 million samples
    Waverforms 200 waveforms/s
    Data delay to host < 10 ms
    Protocol decoders I²C, SPI, UART, I²S integrated User extensible
    Wave Generator (Analog Output)
    Output channels 1
    Data rate Up to 50 MS/s
    Output level 0-3.3 V (Opamp driven)
    Output buffer Up to 2048 samples
    Max slew rate 30 ns/V
    Step 13 mV
    Wave Generator (Digital Output)
    Channels 4
    Data rate Up to 100 MS/s
    Output level 3.3 V or 5 V (selectable)
    Output buffer Up to 2048 samples
    Diode protected Yes
    Programmable Logic
    USB controller MicroChip PIC18F14K50
    USB interface PicKit3 or USB flashable
    FPGA Xilinx Spartan 6
    FPGA interface JTAG and USB flashable
    Size & Weight
    Dimensions (L x W x D) 4.33 x 2.52 x 0.95" (110 x 64 x 24.2 mm)
    Weight 158 g
    Case Aluminium
    Connectivity
    Device/Host mini USB included
    Record waveforms Store Matlab (.mat) or Excel (.csv) files through Dropbox
    Analog BNC 2 probes included
    Digital 8x 0.1" pitch, probes (included)
    Sync USB micro B-B
    Power USB micro B (optional)

    Included

    • 1x SmartScope USB Oscilloscope
    • 2x Analog probes
    • 1x Digital probe cable
    • 1x Mini-B USB cable

    Downloads

    Reviews

    LabNation SmartScope USB-oscilloscoop

    LabNation SmartScope USB Oscilloscope

    4.7 out of 5 stars

    3 have reviewed this product

      Customer Reviews

      Based on 3 reviews Write a review

    Recently viewed products

    Login

    Forgot password?

    Don't have an account yet?
    Create an account