Raspberry Pi Kits

30 products


  •  -20% Raspberry Pi Pico Experimenteerbundel

    Elektor Bundles Raspberry Pi Pico Experimenting Bundle

    The project book, written by well-known Elektor author Dogan Ibrahim, is an introduction to using the Raspberry Pi Pico Experimenting Kit. The kit is based on the Raspberry Pi Pico processor and includes several on-board as well as external sensors, and an actuator. The kit is programmed using the MicroPython programming language. The Thonny development environment (IDE) is used in all the projects in the book. All the projects given in the book have been fully tested and are working. No prior programming or electronic experience are required to follow the projects.The book’s fully evaluated projects feature all the supplied components. Each project includes a block diagram, a circuit diagram, a full program listing, and a complete program description.Included in the bundle Raspberry Pi Pico RP2040 Pico Expansion Board 1.44-inch TFT LCD with ST7735 driver 3x Pushbutton input 3x LED output 1x Active buzzer 6x Interfaces (UART/GPIO/I²C/ADC) Grove-compatible Powered by Micro-USB 8 Modules MPU6050 6-axis IMU DHT11 humidity & temperature sensor 10 A relay SG90 servo Slide potentiometer Serial-to-WiFi (ESP8266) module Ultrasonic range sensor 8-bit RGB addressable LED (WS2818) module Project book (178 pages) 42 Projects in the BookBoard-Hardware-Based Projects Flashing an on-board LED Flashing SOS Flashing LED – using a timer Alternately flashing LEDs Pushbutton control Changing the LED flashing rate using pushbutton interrupts Binary counting LEDs Randomly flashing yellow, green, and blue LEDs Chasing LEDs Reaction timer Buttons and LEDs The TFT Display Second counter Event counter Reaction timer Display LED and button status Temperature and humidity – display in Thonny window Temperature and humidity – LED output Temperature and humidity – display on TFT ON/OFF temperature control ON/OFF temperature control – setting the desired temperature Voltmeter Changing the brightness of an LED Ultrasonic distance measurement - display in Thonny window Ultrasonic distance measurement - display on TFT Height of a person (stadiometer) Ultrasonic reverse-parking aid with buzzer Ultrasonic liquid level controller Melody maker Servo motor control Accurate servo motor control WS2812 LED strip light show - state machine approach WS2812 LED strip light show – using the neopixel library WS2812 LED strip show – another neopixel library example Displaying 3 dimensions of acceleration A car’s maximum acceleration – using the TFT display Level display using the gyroscope MPU6050 temperature display TFT display test TFT bitmap display Using the WiFi Connect to the local Wi-Fi network and display the IP address Controlling an LED from a smartphone using Wi-Fi Displaying the temperature on a smartphone using Wi-Fi

    € 74,95€ 59,95

    Members identical

  •  -14% Raspberry Pi 5 Ultimate Starter Kit (8 GB)

    Elektor Bundles Raspberry Pi 5 Ultimate Starter Kit (8 GB)

    Now save more than €25 with this Starter Kit compared to buying them separately! This Raspberry Pi 5 Ultimate Starter Kit includes everything you need to get started right away with the latest version of the world's most popular mini computer as a development and multimedia device. Kit Contents Raspberry Pi 5 (8 GB RAM)The new Raspberry Pi 5 delivers more performance than ever before. Thanks to the faster CPU, GPU and RAM, Raspberry Pi 5 is up to 3x faster than its already fast predecessor. 64-bit quad-core ARM Cortex-A76 processor (2.4 GHz) VideoCore VII GPU (800 MHz) 8 GB of LPDDR4X RAM (4267 MHz) Raspberry Pi silicon RP1 I/O controller chip Real-time clock On/off button PCIe 2.0 UART connector Fan connector Official 27 W Power Supply for Raspberry Pi 5 (EU, white)The official Raspberry Pi 27 W PD USB-C power supply is designed specifically to power the Raspberry Pi 5. microSD Card pre-installed with Raspberry Pi OS (32 GB)With this microSD (32 GB, Class 10) with pre-installed Raspberry Pi OS you can start using your Raspberry Pi right away. Official Case for Raspberry Pi 5 (white/red)The Raspberry Pi 5 case offers improved thermal features to support the higher peak power consumption of the Raspberry Pi 5. Active Cooler for Raspberry Pi 5The active cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. Official HDMI Cable for Raspberry Pi (white, 1 m)The official Raspberry Pi micro-HDMI to HDMI (A/M) cable (white, 1 m) is designed for the Raspberry Pi. FPC Camera Cable for Raspberry Pi 5 (200 mm)With this cable you can connect your current Raspberry Pi camera products to the Raspberry Pi 5. FPC Display Cable for Raspberry Pi 5 (200 mm)With this cable you can connect your current Raspberry Pi display products to the Raspberry Pi 5. Book: Raspberry Pi 5 Essentials – Program, build, and master over 60 projects with Python This 322-page book (written by the best-selling author Dogan Ibrahim) starts with an introduction to the Raspberry Pi 5 computer and covers the important topics of accessing the computer locally and remotely. Use of the console language commands as well as accessing and using the desktop GUI are described with working examples. The remaining parts of the book cover many Raspberry Pi 5-based hardware projects using components and devices such as LEDs and buzzers, LCDs, Ultrasonic sensors, Temperature and atmospheric pressure sensors, The Sense HAT, Camera modules.

    € 185,50€ 159,95

    Members identical

  • Sand Clock Kit (based on Raspberry Pi Pico)

    Elektor Labs Sand Clock Kit (based on Raspberry Pi Pico)

    Raspberry Pi-based Eye Catcher A standard sand clock just shows how time passes. In contrast, this Raspberry Pi Pico-controlled sand clock shows the exact time by “engraving” the four digits for hour and minute into the layer of sand. After an adjustable time the sand is flattened out by two vibration motors and everything begins all over again. At the heart of the sand clock are two servo motors driving a writing pen through a pantograph mechanism. A third servo motor lifts the pen up and down. The sand container is equipped with two vibration motors to flatten the sand. The electronic part of the sand clock consists of a Raspberry Pi Pico and an RTC/driver board with a real-time clock, plus driver circuits for the servo motors. A detailed construction manual is available for downloading. Features Dimensions: 135 x 110 x 80 mm Build time: 1.5 to 2 hours approx. Included 3x Precut acrylic sheets with all mechanical parts 3x Mini servo motors 2x Vibration motors 1x Raspberry Pi Pico 1x RTC/driver board with assembled parts Nuts, bolts, spacers, and wires for the assembly Fine-grained white sand

    € 62,95

    Members € 56,66

  •  -33% Raspberry Pi T-Type Kit

    Kuongshun Raspberry Pi T-Type Kit

    Features Suitable for Raspberry Pi + GPIO Extension Board Exquisite appearance DIY operation Specifications Size of GPIO Extension Board: 7.5 x 6 cm (3 x 2.4") Size of Breadboard: 16.5 x 5.5 x 1 cm (6.5 x 2.2 x 0.4") Included 1x GPIO Extension Board 1x Breadboard 1x 40P Pin Connect Line 8x 1K Resistor 8x 10K Resistor 4x LED (yellow) 4x LED (red) 4x Key 10x 25 mm Jumper Wires A 10x 25 mm Jumper Wires B

    € 14,95€ 9,95

    Members identical

  •  -25% Electronics Fans Package – Component Basic Starter Kit

    Kuongshun Electronics Fans Package - Component Basic Starter Kit

    Contents 1x High Quality Retail Box 10x  1/4W 1% 100R Resistor 10x  1/4W 1% 220R Resistor 10x  1/4W 1% 330R Resistor 10x  1/4W 1% 1K Resistor 10x  1/4W 1% 10K Resistor 10x  1/4W 1% 100K Resistor 10x  1/4W 1% 4.7K Resistor 10x  1/4W 1% 47K Resistor 10x  100PF Ceramic Capacitor 10x  10NF Ceramic Capacitor 10x  100NF Ceramic Capacitor 10x  22PF Ceramic Capacitor 10x  10UF aluminum electrolytic capacitor 10x  470UF aluminum electrolytic capacitor 10x Red LED 10x Green LED 10x Yellow LED 10x Blue LED 8x  12x12x7.3 Switch 2x Red Cap 2x Yellow Cap 2x Green Cap 2x Blue Cap 1x 10K Precision Potentiometer 2x RGB LED 1x Active Buzzer 1x Passive Buzzer 1x Pin Header 1x40 1x Resistor Card 1x 400pts Breadboard 1x 30pcs/pack Breadboard Jumper Wires Set

    € 19,95€ 14,95

    Members identical

  • Last stock! Raspberry Pi 400 Kit – Raspberry Pi 4-gebaseerde PC Kit (EU)

    Raspberry Pi Foundation Raspberry Pi 400 Kit - Raspberry Pi 4-based PC Kit (EU)

    2 reviews

    1 in stock

    Technical Specifications (Raspberry Pi 400) Processor Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8 GHz RAM 4 GB LPDDR4-3200 Connectivity Dual-band (2.4 GHz and 5.0 GHz) IEEE 802.11b/g/n/ac wireless LANBluetooth 5.0, BLEGigabit Ethernet2 × USB 3.0 and 1 × USB 2.0 ports GPIO Horizontal 40-pin GPIO header Video & Sound 2 × micro HDMI ports (supports up to 4Kp60) Multimedia H.265 (4Kp60 decode)H.264 (1080p60 decode, 1080p30 encode)OpenGL ES 3.0 graphics SD card support MicroSD card slot for operating system and data storage Keyboard US keyboard Power 5 V DC via USB connector Operating temperature 0°C to +40°C Dimensions 286 × 122 × 23 mm (maximum) Kit Contents Raspberry Pi 400 (US keyboard layout, QWERTY) Official EU Power Supply (5.1 V, 3 A) for Raspberry  Pi 4 (white) Official Raspberry Pi Mouse (white/red) Official HDMI Cable for Raspberry Pi 4 (white, 1 m) microSD Card (16 GB, Class 10) with SD Adapter (Pre-Installed with NOOBS) The Official Raspberry Pi Beginner's Guide (4th Edition)

    1 in stock

    € 109,95

    Members € 98,96

  •  -16% Raspberry Pi 5 Ultimate Starter Kit (4 GB)

    Elektor Bundles Raspberry Pi 5 Ultimate Starter Kit (4 GB)

    Now save more than €25 with this Starter Kit compared to buying them separately! This Raspberry Pi 5 Ultimate Starter Kit includes everything you need to get started right away with the latest version of the world's most popular mini computer as a development and multimedia device. Kit Contents Raspberry Pi 5 (4 GB RAM)The new Raspberry Pi 5 delivers more performance than ever before. Thanks to the faster CPU, GPU and RAM, Raspberry Pi 5 is up to 3x faster than its already fast predecessor. 64-bit quad-core ARM Cortex-A76 processor (2.4 GHz) VideoCore VII GPU (800 MHz) 4 GB of LPDDR4X RAM (4267 MHz) Raspberry Pi silicon RP1 I/O controller chip Real-time clock On/off button PCIe 2.0 UART connector Fan connector Official 27 W Power Supply for Raspberry Pi 5 (EU, white)The official Raspberry Pi 27 W PD USB-C power supply is designed specifically to power the Raspberry Pi 5. microSD Card pre-installed with Raspberry Pi OS (32 GB)With this microSD (32 GB, Class 10) with pre-installed Raspberry Pi OS you can start using your Raspberry Pi right away. Official Case for Raspberry Pi 5 (white/red)The Raspberry Pi 5 case offers improved thermal features to support the higher peak power consumption of the Raspberry Pi 5. Active Cooler for Raspberry Pi 5The active cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. Official HDMI Cable for Raspberry Pi (white, 1 m)The official Raspberry Pi micro-HDMI to HDMI (A/M) cable (white, 1 m) is designed for the Raspberry Pi. FPC Camera Cable for Raspberry Pi 5 (200 mm)With this cable you can connect your current Raspberry Pi camera products to the Raspberry Pi 5. FPC Display Cable for Raspberry Pi 5 (200 mm)With this cable you can connect your current Raspberry Pi display products to the Raspberry Pi 5. Book: Raspberry Pi 5 Essentials – Program, build, and master over 60 projects with Python This 322-page book (written by the best-selling author Dogan Ibrahim) starts with an introduction to the Raspberry Pi 5 computer and covers the important topics of accessing the computer locally and remotely. Use of the console language commands as well as accessing and using the desktop GUI are described with working examples. The remaining parts of the book cover many Raspberry Pi 5-based hardware projects using components and devices such as LEDs and buzzers, LCDs, Ultrasonic sensors, Temperature and atmospheric pressure sensors, The Sense HAT, Camera modules.

    € 160,50€ 134,95

    Members identical

  • 4tronix M.A.R.S. Rover Robot Kit voor Raspberry Pi Zero

    4tronix M.A.R.S. Rover Robot Kit for Raspberry Pi Zero

    Inspired by NASA's “Curiosity” and “Perseverance” Mars Rovers, this innovative M.A.R.S. Rover is an autonomous vehicle designed to drive around on rough terrain here on Earth. It uses the same rocker arm, bogey and differential arm mechanism. M.A.R.S. is an acronym for "Mobile Autonomous Robotic System". Features 6 Motors: 80 rpm 6 V, N20 micro gear motors 4 Servos: MG90S metal gear analog micro servos 4 FireLEDs Ultrasonic distance sensor on steerable mast Total number of special PCBs: 30 Number of different PCB designs: 11 Length: 200 mm Width: 185 mm Height with Mast: 170 mm Weight excluding Raspberry Pi Zero and batteries: 460 g There is a Python library module for the Raspberry Pi Zero that makes it easy to control the unit. Required Raspberry Pi Zero 4 rechargeable AA batteries Downloads Assembly of 4tronix M.A.R.S. Rover Kit Programming M.A.R.S. Rover on Raspberry Pi Zero Coding using Microsoft Makecode on GitHub

    € 184,95

    Members € 166,46

  • Basic Kit for Raspberry Pi Pico (Pico included)

    Kuongshun Basic Kit for Raspberry Pi Pico (Pico included)

    Contents Raspberry Pi Pico RP2040 Development Board 30 cm Micro:bit flat USB cable for Smart Car 10-Pin Male to Female Dupont Line Three-leaf Fan Blue Motor Bracket with Screw 3 V DC motor with wire ULN2003 Driver Board Stepper Motor Green 28 mm Leg LED 5 mm Red (1pcs) 28 mm Leg LED 5 mm Green (1pcs) 28 mm Leg LED 5 mm Yellow (1pcs) 28 mm Leg LED 5 mm Blue (1pcs) Resistor 220R 1/4W 1% (1pcs) 400 Points Soldless Breadboard Infrared Obstacle Avoidance Tracking Sensor Module Active Alarm Buzzer Driver Module Low Current Blue 7 Color Flashing LED Module Tachile Switch Module

    € 34,95

    Members € 31,46

  • MonkMakes Air Quality Kit for Raspberry Pi

    MonkMakes MonkMakes Air Quality Kit for Raspberry Pi

    Out of stock

    The board has a display of six LEDs (green, orange and red) that display the air quality and a buzzer. Temperature and air quality readings can be read by your Raspberry Pi, and the buzzer and LED display can also be controlled from your Raspberry Pi. The Air Quality Sensor board plugs directly into the back of a Raspberry Pi 400, but, can also be used with other models of Raspberry Pi, using the jumper wires and GPIO template included in the kit. It uses the CCS811 VOC sensor IC and a TMP235 temperature sensor. It also has a rudimentary display and a buzzer. It also uses a bi-directional UART interface to communicate with the Pi. The Air Quality Sensor board is designed for use with the Raspberry Pi 400 but also works with other models of Raspberry Pi using the jumper wires included in the kit. Downloads Instructions Datasheet

    Out of stock

    € 29,95

    Members € 26,96

  • Official Raspberry Pi 4 Desktop Kit (EU)

    Raspberry Pi Foundation Official Raspberry Pi 4 Desktop Kit (EU)

    This "All in One" Raspberry Pi 4 Desktop Starterkit contains all official parts and allows an easy and quick start! Raspberry Pi 4 Desktop Kit contains: Raspberry Pi US Keyboard & Mouse 2x micro HDMI to Standard HDMI cable (A/M) 1 m Raspberry Pi 15.3 W USB-C Power Supply (EU version) Raspberry Pi 4 Case Official Raspberry Pi Beginner's Guide (English language) 16 GB NOOBS with Raspbian microSD card Raspberry Pi 4 B is NOT included.

    € 79,95

    Members € 71,96

  • SmartPi 3.0 Smart Meter for Raspberry Pi (Bundle)

    enerserve SmartPi 3.0 Smart Meter for Raspberry Pi (Bundle)

    Out of stock

    The Smart Pi 3.0 expansion module extends the Raspberry Pi with interfaces to measure voltage and current in a contactless manner. It enables to control electricity production consumption and turns the Raspberry Pi into a full featured smart meter. All measurement data can be stored and are accessable via the local network or Internet for disposal. Current is measured contactless via inductive current sensors. In the standard version currents up to 100 A can be measured. A simple changeover of the jumper enables the connection of any cable re-converter with a secondary current of 1 A. This allows currents of up to 1000 A and more to be detected. The SmartPi 3.0 has 3 inputs for current measurement (L1, L2, L3) and three inputs for voltage measurement. This allows measurements on all three phases and even the neutral conductor. The SmartPi 3.0 and the Raspberry Pi can be powered by the voltage input. An external power supply is not required. If the voltage measurement is connected, the direction of the energy flow can be determined and the SmartPi is a full-fledged bi-directional smart meter. Other Units Current Voltage Power Active power Reactive power Apparent power Energy consumption Energy generation Power consumption Power generation Power frequency Cos phi The interfaces to the Raspberry Pi are electrically isolated to ensure maximum safety. Website and REST interface Open Source software is written in Go and includes all the necessary drivers, a web server with web page and a REST interface. All measurement data can be logged and displayed on tablet or smartphone. The REST interface allows to integrate the SmartPi into self-made applications and apps. Application examples for the SmartPi Energy Monitor via network and Internet Monitoring of power frequency  Power monitor Alarms for electricity consumers Alarms at increased consumption Integration into energy management systems Cost control Software Features Reading current, voltage, power, and many other data Minutes store the values ​​in the database MQTT Support Prometheus support (not yet documented) CSV FTP upload Web interface for display and configuration UMTS support Features/Specifications Raspberry Pi compatible connector Raspberry Pi compatible size Galvanic isolation Integrated power supply from the voltage measuring path via stable terminals OpenSource driver and API Current measurement at 3-phase + neutral conductor Connection for inductive current sensors with a secondary output of 50 mA, 333 mV and 1 A Screw terminals for connection of current and voltage measurement Compatibility with all Raspberry Pi models  Buffered RTC (the Raspberry Pi continues to run even without an Internet connection after a power failure) Additional status LED Valuable housing with DIN rail mounting Package Contents 1x SmartPi 3 expansion module 3x Current probe (100 A, 50 mA) 1x Housing for Raspberry Pi 4 Links Installation Forum GitHub

    Out of stock

    € 199,95

    Members € 179,96

  • Last stock! Joy-Pi Note – 11,6` Raspberry Pi 4-gebaseerde Notebook

    JOY-iT Joy-Pi Note - 11.6” Raspberry Pi 4-based Notebook

    1 in stock

    3-in-1 Solution: Notebook, Learning Platform and Experiment Center The Joy-Pi Note is the new flagship in the Joy-Pi family. With its 11.6" IPS screen and a detachable, wireless keyboard, it takes the Joy-Pi‘s basic concept in a new, high-quality and attractive format. With 46 courses and 18 projects, the Joy-Pi Note is not only suitable as an experiment center, but is also ideal for use in the education sector. With over 22 integrated sensors and modules, there are no limits to the user‘s own joy of experimentation. This simplifies the introduction to electrical engineering and programming. Due to the installed learning platform, which was developed especially for the Joy-Pi Note, the installed units can be operated and learned independently of one‘s own previous knowledge. It is also possible to connect additional sensors and modules via the pins of the Raspberry Pi, which are routed to the outside, and thus also carry out more complex projects. Of course, the Joy-Pi Note can also be used as a „classic“ notebook. All programs compatible with the Raspberry Pi 4 can be installed. The integrated 2 MP camera also makes video conferencing possible, for example. All Raspberry Pi 4 models can be used (we recommend 4 GB RAM or higher). On the bottom of the device, you will find a compartment where you can insert a power bank to also operate the Joy-Pi Note mobile. Specifications Main Features Screen 11.6" 1920x1080 IPS LCD Camera 2 MP Special features Fully equipped set, completely integrated experiment center, pre-installed learning platform, detachable wireless keyboard, integrated compartment for powerbank & accessories Lessons of the learning platform 46 courses & 18 projects for Python and Scratch Power supply 12 V hollow plug, 5 V USB Compatible to Raspberry Pi 4 (4 GB and 8 GB RAM) Keyboard layouts DE (default) + US, UK, FR, IT, PT and Nordic Dimensions 291 x 190 x 46 mm Weight 1.3 kg Included sensors, modules & accessories Display 7-segment display, 16x2 LCD module, 8x8 RGB Matrix Sensors DHT11 temperature & humidity sensor, tilt sensor, motion sensor, sound sensor, touch sensor, RFID module, light sensor, ultrasonic distance sensor Motors Servo interface, stepper motor interface, vibration motor Control Joystick, 4x4 button matrix, Raspberry Pi & PCB connection switch, motion sensor, sensitivity controller, sound sensor sensitivity controller, 16x2 LCD module brightness controller Others Relay, fan, GPIO extension, GPIO LED indicator, breadboard, IO/ADC/I²C/UART expansion interface, infrared sensor interface, buzzer, display driver Accessories RFID chip, RFID card, 12 V power supply, servo motor, stepper motor, infrared receiver, infrared remote control, DC motor with fan attachment, HDMI connector, screwdriver, microSD card (32 GB), SD card reader, electronic accessories, wireless mouse, wireless keyboard Included Joy-Pi Note Accessories Quick guide Required Raspberry Pi 4 (4 GB or 8 GB RAM)

    1 in stock

    € 399,00

    Members € 359,10

  • SunFounder 4WD Robot Car Kit for Raspberry Pi Pico

    SunFounder SunFounder 4WD Robot Car Kit for Raspberry Pi Pico

    Out of stock

    Features The Pico Car Kit is a Raspberry Pi Pico based, cool, robotics kit for beginners (12+ Teens) and adults to learn Raspberry Pi Pico programming, electronics assembling and robotics knowledge. (Raspberry Pi Pico with pre-soldered GPIO pins is included.) The Raspberry Pico Car is equipped with a variety of module, ultrasonic module, grayscale sensor, speed sensor, etc and three 8-bit WS2812 RGB boards. In addition, this 4-wheel drive car with Pico RDP also can be DIY interesting functions. The Pico robot building kit can perform Obstacle Avoidance, Object Tracking, Speed Measurement, Mileage Calculation, Line Following and Cliff Detection. In addition, the car is surrounded by three 8-bit WS2812 RGB boards that are capable of displaying cool light effects and direction indications. In addition to providing MicroPython code and tutorials, the customizable application SunFounder Controller is also provided to control this robotic kit. The Raspberry Pi Pico-4WD robot car kit is completely Open Source, providing structure diagrams, module schematics and source code. Includes 3 8-Bit WS2812 RGB Boards Strip. Each LED can be Independently Controlled to Display a Myriad of Colors. Package List Raspberry Pi Pico × 1 Speed Module × 1 Grayscale Semsor Module × 1 8-Bit WS2812B RGB × 3 Pico RDP × 1 Encoder Disk × 2 Ultrasonic Module × 1 Motor × 4 Servo × 1 Top Plate × 1 Bottom Plate × 1 Support × 4 Radar support × 1 R2056 Rivet × 4 R2655 Rivet × 12 R3055 Rivet × 6 Battery Holder × 1 Wheel × 4 M1.5x 4 Self-tapping Screw × 4 M3x8 Self-tapping Screw × 4 M1.4x6 Screw × 6 M2.5x6Screw × 10 M3x6 Screw × 12 M3x28 Screw × 10 M1.4 Nut × 6 M3 Nut 6 × 12 M2.5 x 11Standoff  × 6 M3X30 Standoff × 7 Screwdriver × 1 5-pin Wire × 2 4-pin Wire × 4 3-pin Wire × 5 Riboon × 1 USB Cable × 1 Zip Tie × 4 Online Tutorial https://docs.sunfounder.com/projects/pico-4wd-car

    Out of stock

    € 84,95

    Members € 76,46

  •  -20% MonkMakes Servo Kit for Raspberry Pi

    MonkMakes MonkMakes Servo Kit for Raspberry Pi

    This kit includes 2 servo motors and a Monk Makes ServoSix interface board for use with Raspberry Pi. It also includes a Raspberry Leaf GPIO template, a bunch of female-to-female header pins and a 4xAA battery box.Features of the Servo Six board Screw terminals for servo power supply Reverse-polarity protection for the servo power supply 470 µF 16 V capacitor for servo supply 470 Ω current limiting resistors for servo control lines (to protect GPIO pins) Power indicator LE DownloadsInstructions

    € 24,95€ 19,95

    Members identical

  • SunFounder PiCar-4WD Raspberry Pi Car Robot Kit

    SunFounder SunFounder PiCar-4WD Raspberry Pi Car Robot Kit

    Out of stock

    SunFounder PiCar-4WD is a very cool raspberry pi robot kit designed for both Raspberry Pi beginners and professionals to learn electronic kits. It is suitable for the Raspberry Pi 4B and 3 Model B+/ 3B. With the grayscale module, ultrasonic module, Photo-interrupter sensor module, the car can realize obstacle avoidance, line-following, object following, cliff detection, velocity measurement, mileage calculation, and so on.In addition, this new raspberry pi smart car with a tutorial make you easy to assemble this robot car kit, we have written a friendly browser software that quickly turns on/off and freely combines the above-mentioned various functions. U will see a cool appearance car kit to learn electronics, programming, and robotics.If you are interested in autonomous driving, you should own a SunFounder PiCar-4WD! Features 【PROGRAMMING LANGUAGES & VARIOUS MODULES】The Raspberry Pi robot be programmed by Python language. It comes with four sensor modules including 4WD HAT Module, Velocity Measurement Module, 3-ch Grayscale Sensor Module, and 3.3V Ultrasonic Module【MULTIPLE FUNCTIONS】The Multifunctional SunFounder 4WD Smart Car supports multiple functions: Obstacle Avoidance; Line Following; Object Following; Cliff Detection; Velocity Measurement; Mileage Calculation; Radar Sampling. In addition, It has 4 powerful motors, create more power than SunFounder PicarV and PicarS.【WEB CONTROL】The Raspberry Pi Car can be controlled by Android and iOS Mobile to get web remote control, only need your phone can connect the Internet. It compatible with PC (use keyboard control) /Phone (recommended)/Tablet, make robot kits easy, make robot kits fun.【FRIENDLY DESIGN】It comes with a user manual, including operational examples of web terminal, also provides the original python code for in-depth learning. Package List Electronic Parts1 x 4WD HAT Module1 x 2-ch Photo-interrupter Module(Velocity Measurement Module)1 x 3-ch Grayscale Sensor Module1 x 3.3V Ultrasonic Module Other Parts1 x Connection Wire(Grayscale Sensor Module)1 x Connection Wire(Ultrasonic Module)1 x Connection Wire(Photo-interrupter Module)1 x Ribbon4 x Cable Tie1 x Screwdriver4 x Wheels 1 x Battery Holder Driving Parts 4 x Motor1 x Servo Structural Plates1 x Top Plate1 x Bottom Plate2 x Spoiler4 x Support1 x Radar support Mechanical Parts4 x M1.5*4mm Self-tapping Screw6 x M1.4*8mm Screw4 x M2*10 mm Screw10 x M2.5*6mm Screw4 x M3*8mm Flat-head16 x M3*8mm Screw10 x M3*28mm Screw6 x M1.4 Nut4 x M2 Nut18 x M3 Nut6 x M2.5*11mm Bi-pass Nylon Standoff2 x Encoding Disk6 x M2.5*8+6mm Single-pass Nylon Standoff6 x M3*30mm Bi-pass Nylon Standoff

    Out of stock

    € 139,95

    Members € 125,96

  • Kitronik Discovery Kit for Raspberry Pi Pico

    Kitronik Kitronik Discovery Kit for Raspberry Pi Pico

    The kit ships with a comprehensive guide booklet. The booklet covers the basic setup and then how to complete each of the 7 experiments. Each experiment is complete with detailed circuit diagrams, explanations, and a complete code run-through. This means that you can get started without having to understand too much Python.The Raspberry Pi Pico board, a new low cost, high-performance microcontroller. The board features a powerful new, Raspberry Pi designed ARM-based dual-core chip-- the RP2040. The pico also features 64KB of internal RAM and support for up to 16MB of off-chip Flash. A wide range of flexible I/O options includes I2C, SPI, and Programmable I/O (PIO). These support endless possible applications for this small and affordable board.The kit is programmed using MicroPython. This is a full Python 3 implementation created specifically for small embedded microcontrollers, such as the Pico and the popular BBC micro:bit. You will use the Thonny editor to create your code, which can then be saved directly to the Pico from the editor via USB. Thonny is a Python Editor/IDE designed to allow beginners to get up and running with Python coding with as little fuss as possible.A power pack is not required as power will be supplied via the USB connection to the computer that the Thonny editor is running on.Features This kit offers a great introduction to microcontrollers, Python coding, and physical computing. Make the 7 experiments in the step-by-step tutorial book and learn as you go. All parts are included to conduct the 7 experiments. The kit is supplied with a detailed booklet that covers setup and then how to complete the 7 experiments. The experiments explore; simple coding, Interrupts, Threads, Digital Inputs, and Analog and Digital Outputs. Once you have completed all of the included experiments, you have the perfect prototyping system for further learning/prototyping with the Raspberry Pi Pico board. Included is a large format breadboard for ease of prototyping. The kit is supplied in re-usable packaging suitable for long term storage of the kit. Contents 1x Large Prototype Breadboard 2x Red 5mm LED 2x Yellow 5mm LED 2x Green 5mm LED 10x 330Ω Resistor 1x Piezo Element Buzzer 20x Male to Male Jumper Wires 2x Push Switches A booklet guide containing basic setup information and the following 7 experiments Exp. 1 - Show Me The Light Exp. 2 - Control an Input Exp. 3 - Interrupt Me Exp. 4 - Making a Noise Exp. 5 - So Many Interruptions Exp. 6 - Rub Head and Pat Tummy - Threads Exp. 7 - Building a System from the Blocks we have Learnt The kit is supplied in re-usable packaging suitable for long term storage of the kit. Requires USB Lead Raspberry Pi Pico Pin Headers

    € 17,95

    Members € 16,16

  • MonkMakes Amplified Speaker Kit for Raspberry Pi

    MonkMakes MonkMakes Amplified Speaker Kit for Raspberry Pi

    The Speaker Kit for Raspberry Pi is a small amplified speaker designed for the Raspberry Pi. Included MonkMakes Amplified Speaker Set of 10 female to female header wires Short stereo audio lead Raspberry Leaf GPIO template Downloads Instructions Datasheet

    € 19,95

    Members € 17,96

  • Joy-Pi Advanced - Development Platform for Raspberry Pi, Arduino and ESP32

    JOY-iT Joy-Pi Advanced - Development Platform for Raspberry Pi, Arduino and ESP32

    The Joy-Pi Advanced is a compact and powerful device that allows you to realize your projects quickly and easily. Whether you already have a lot of experience, or next to none, the Joy-Pi Advanced lets you unleash your creativity. Thanks to its compatibility with a wide range of platforms, including Raspberry Pi, Raspberry Pi Pico, Arduino Nano, BBC micro:bit, and NodeMCU ESP32, you can easily and quickly access your preferred platform. In addition, the Joy-Pi Advanced features more than 30 stations, lessons, and modules, giving you an unlimited variety of ways to get your projects done. With the self-developed learning center, you can not only improve your skills but also create new projects. The learning center offers a wealth of information and tutorials that will guide you step by step through your projects. Joy-Pi Advanced is characterized in particular by its intelligent switch units, which allow an extended use of the available pins. A total of three switch units are integrated, each equipped with 12 individual switches that provide precise control of the connected sensors and modules. This system solves the well-known problem of limited pin count that occurs with conventional microcontrollers. The switch units allow you to operate a large number of sensors and modules in parallel by switching them on and off individually. This simulates multiple pin assignment, allowing you to exploit the full power of your projects without compromising functionality. By combining innovative adapter boards and the micro:bit slot, you can achieve seamless compatibility with a wide range of microcontrollers such as Raspberry Pi Pico, NodeMCU ESP32, micro:mit and Arduino Nano. The specially developed adapter boards are designed to perfectly match the respective microcontroller. By plugging the microcontroller onto the appropriate adapter board and then plugging it into the micro:bit slot, the Joy-Pi Advanced quickly and easily becomes compatible with the different microcontrollers. This allows seamless integration of your preferred platform and the ability to combine the strengths of the different microcontrollers in your projects. This way, you can fully focus on your creative projects without worrying about the compatibility of different microcontrollers. The Joy-Pi Advanced simplifies the development process and gives you the possibility to design your projects flexibly and individually. Features Highly integrated development platform & learning center Fast, easy & wireless combination of various sensors & actuators Installation option for Raspberry Pi 4 Compatible with various microcontrollers Self-developed, didactic learning platform for Raspberry Pi & Windows Specifications Compatible to Raspberry Pi 4, Arduino Nano, NodeMCU ESP32, BBC micro:bit, Raspberry Pi Pico Installed sensors, actuators & components 39 Learning platform Over 40 entries in the know-ledge database, 10 projects, 10 learning tasks, 14 visions Displays 7-segment display, 16x2 display, 1.8“ TFT display, 0.96“ OLED display, 8x8 RGB matrix Sensors DS18B20, shock sensor, hall sensor, barometer, sound sensor, gyroscope, PIR sensor, Light barrier, NTC, Light sensor, 6x touch sensor, color sensor, ultrasonic distance sensor, DHT11 temperature & humidity sensor Control Joystick, 5x switches, potentiometer, rotary encoder, 4x4 button matrix, relays, PWM fan Motors Servo interface, Stepper motor interface, Vibration motor Measuring & conversion modules Analog-Digital Converter, Level converter, voltmeter, Variable voltage supply Other components RTC real time clock, buzzer, EEPROM memory, infrared receiver, breadboard, RFID reader Adapter boards Adapter for NodeMCU ESP32, Arduino Nano & Raspberry Pi Pico, Board connectors for Raspberry Pi & External Boards Electronic components Infrared remote control, RFID chip, RFID card, 6x alligator clips, microSD card reader, servo motor, stepper motor, 32 GB microSD card Components 40x resistors, 3x green LEDs, 3x yellow LEDs, 3x red LEDs, 1x transistor, 5x buttons, 1x potentiometer, 2x capacitors Other accessories Screw assortment, screwdriver, accessory storage bag, power supply & power cable, servo mount Power supply Built-in power supply: 36 W, 12 V, 3 A Case connector: Small device plug C8 Voltage outputs 12 V, 5 V, 3.3 V, Variable voltage output (2-11 V) Data buses & signal outputs I²C, SPI, Analog to digital converter Battery (RTC) CR2032 Dimensions 327 x 200 x 52 mm Required Raspberry Pi 4 Downloads Joy-Pi website Datasheet Manual

    € 369,00

    Members € 332,10

  • SunFounder Kepler Kit (Ultimate Starter Kit for Raspberry Pi Pico W)

    SunFounder SunFounder Kepler Kit (Ultimate Starter Kit for Raspberry Pi Pico W)

    Your gateway to IoT and microcontroller programming With 450+ components and 117 online projects, this comprehensive kit ignites your creativity. The tutorials by Paul McWhorter make learning enjoyable for beginners and advanced users. This kit supports MicroPython, C/C++, and Piper Make, offering diverse programming options. Explore sensors, actuators, LEDs, and LCDs for endless project possibilities. From home automation to robotics, this kit empowers your tech journey. Features IoT Starter Kit for Beginners: This kit offers a rich IoT learning experience for beginners. With 450+ components, 117 projects, and expert-led video lessons, this kit makes learning microcontroller programming and IoT engaging and accessible. Expert-Guided Video Lessons: The kit includes 27 video tutorials by the renowned educator, Paul McWhorter. His engaging style simplifies complex concepts, ensuring an effective learning experience in microcontroller programming. Wide Range of Hardware: The kit includes a diverse array of components like sensors, actuators, LEDs, LCDs, and more, enabling you to experiment and create a variety of projects with the Raspberry Pi Pico W. Supports Multiple Languages: The kit offers versatility with support for three programming languages - MicroPython, C/C++, and Piper Make, providing a diverse programming learning experience. Dedicated Support: Benefit from our ongoing assistance, including a community forum and timely technical help for a seamless learning experience. Included Raspberry Pi Pico W Breadboard Jumper Wires Resistor Transistor Capacitor Diode Li-po Charger Module 74HC595 TA6586 – Motor Driver Chip LED RGB LED LED Bar Graph 7-segment Display 4-Digit 7-Segment Display LED Dot Matrix I²C LCD1602 WS2812 RGB 8 LEDs Strip Buzzer DC Motor Servo DC Water Pump Relay Button Micro Switch Slide Switch Potentiometer Infrared Receiver Joystick Module 4x4 Keypad MPR121 Module MFRC522 Module Photoresistor Thermistor Tilt Switch Reed Switch PIR Motion Sensor Module Water Level Sensor Module Ultrasonic Module DHT11 Humiture Sensor MPU6050 Module Documentation Online Tutorials in 3 languages (EN, DE and JP)

    € 69,95

    Members € 62,96

  • Seeed Studio Grove Starter Kit voor Raspberry Pi Pico

    Seeed Studio Seeed Studio Grove Starter Kit for Raspberry Pi Pico

    Features Get Started with Raspberry Pi Pico easily and quickly  14 handpicked Grove Modules, including 5 sensors/ 5 actuators/ 2LED/ 1 LCD display/ 1 Grove shield   Detailed and comprehensive Micropython tutorials for each module  (Arduino Guide is on the way)  No wiring, no welding, plug & play experience Included 1 x Grove - LED Pack 1 x Grove - RGB LED (WS2813 Mini) 1 x Grove - Light Sensor 1 x Grove - Sound Sensor 1 x Grove - Rotary Angle Sensor 1 x Grove - Temperature & Humidity Sensor 1 x Grove - mini PIR motion sensor 1 x Grove - Passive Buzzer 1 x Grove - Button 1 x Grove - Servo 1 x Grove - Mini Fan 1 x Grove - Relay 1 x Grove - 16x2 LCD 1 x Grove Shield for Pi Pico 8 x Grove Cable

    € 54,95

    Members € 49,46

  • Seeed Studio Grove Smart Agriculture Kit for Raspberry Pi 4

    Seeed Studio Seeed Studio Grove Smart Agriculture Kit for Raspberry Pi 4

    Features Easy-to-use and low-cost hardware kit: combines an affordable hardware kit with FREE curriculums and activities for students’ hands-on experience in precision agriculture techniques to food production. New tools for STEAM Education learners: students learn about AI, Machine learning, and IoT by building a garden monitoring system. Easily use with Raspberry Pi 4: with atmospheric and environmental sensors to understand their soil's health, analyze data, and make decisions.  Real-time data collection: The student-built IoT devices connect to custom Microsoft Excel workbooks that collect real-time data using Excel’s Data Streamer. Building your own Machine Learning models: using Lobe.ai, students apply the technique to predict nutrient deficiencies in their plants and identifying pests in their garden. Introducing Microsoft responsible AI framework: engaging students with some of the social and ethical challenges raised by this new technology. Applications Combined with software and curriculum & resources, you can get hands-on experience, learn about artificial intelligence, machine learning, the Internet of Things, data science and then apply the knowledge in growing plants in the real world. This kit is highly suitable for use in different scenarios, no matter in the classroom, at home, at maker spaces/ fab labs or through distance learning courses: School garden monitoring Home garden monitoring Distance teaching /learning Online courses Hobby and DIY projects Included 1x Grove Base Hat for Raspberry Pi with a Fan 1x One Wire Temperature Sensor 1x Grove Capacitive Soil Moisture Sensor 1x Grove Sunlight Sensor 1x Grove Temperature & Humidity Sensor 1x Grove Relay 1x Grove Dual Button 1x micro SD Card with Card Reader (32 GB) 1x USB to TTL Serial Cable 1x Screwdriver Downloads FarmBeats for Student Kit Brochure FarmBeats Student Image

    € 114,95

    Members € 103,46

  • SunFounder NAS Kit for Raspberry Pi with Dual Fan

    SunFounder NAS Kit for Raspberry Pi with Dual Fan

    Features Abundant  Expandability- You can add a hard drive by merely adding the nylon standoff and acrylic board. The OpenMediaVault includes services such as SSH, (S)FTP, SMB/CIFS, DAAP media servers, RSync, BitTorrent clients. The E-Ink screen makes it more power-efficient. It provides you with an excellent visual experience, which is used to display Raspberry Pi's CPU temperature, CPU usage, disk usage, fan power, etc. Simple product composition, accessories with corresponding numbers, and providing detailed tutorials make it easy to set up. Dual fans and heat sinks installed, working automatically when the CPU temperature exceeds 54 degrees, quickly and effectively solving the heating problem of Raspberry pi motherboard. Specification for E-Ink Working voltage:3.3 V Communication interface: 3-wireSPI, 4-wireSPI Dimensions: 59.2 mm x 29.2 mm x 1.05 mm Display size: 48.55 mm x 23.71 mm Pitch: 0.194 x 0.194 Resolution: 250 x 122 Display color: black and white Gray level: 2 Global refresh: 2s Refresh function: 26.4 Mw (Typ.) Standby power consumption Viewing angle > 170 ° If the manual refresh mode is set, you will need to press OK to refresh. In auto mode, the E-Ink screen will refresh automatically every 500 ms; Package List 1 x NAS HAT 3 x NAS 3 mm transparent acrylic 1 x Micro SD card (8 G) 1 x SATA to USB hard drive cable ( length 0.45 M) 1 x Screwdriver 4 x Silicone Pad 1 x Dual fan 3 x Heat sink 10 x M2 x 12 Screws 10 x M2 Nut 14x M3 x 8 mm Screws 10 x M2.5 x 6 mm Screws 6 x M3 x 26 mm Nylon Standoff 6 x M3 x 13 + 6 mm Single-pass Nylon Standoff 6 x M2.5 x 11 mm Nylon Standoff 6 x M2.5 x 8 + 6 mm single-pass Nylon Standoff NOTE: It is recommended to use the RPi 4B with the SunFounder NAS Kit together, as the USB3.0 interface can provide you with higher file transfer efficiency. The SunFounder NAS Kit currently only supports the expansion of two hard-drive. 

    € 89,95

    Members € 80,96

  • Google AIY Vision Kit for Raspberry Pi

    Google Google AIY Vision Kit for Raspberry Pi

    Out of stock

    Google AIY Projects brings do-it-yourself artificial intelligence to your maker projects. The Google AIY Vision Kit lets you build an image recognition device that can see and identify objects, powered by TensorFlow’s machine learning models.The kit includes all of the components needed to assemble the basic kit that works with the Google Assistant SDK as well as on-device image & vision recognition with TensorFlow using the Intel Movidius Myriad Vision Processing Unit (VPU) hardware assist.Assembling the kit should take about one hour. There is no-soldering-required, complete AIY kit is an awesome Pi Zero-powered project!Included Vision Bonnet Board with Movidius VPU for Raspberry Pi - fully assembled Raspberry Pi Zero WH (Fully assembled) Raspberry Pi Camera Board Pi Zero Camera flat flex cable CSI flat flex cable to connect to the camera MicroSD card for the operating system 11mm Plastic standoffs Privacy LED Arcade Push Button Button harness Piezo buzzer LED bezel USB cable - A/MicroB Tripod mounting nut External cardboard box Internal cardboard frame

    Out of stock

    € 104,95

    Members € 94,46

Buying Raspberry PI kits for starters

Can't wait to get started with Raspberry Pi? With a starter kit, you have all the components you need.

Those eager to start programming on a Raspberry will make a flying start with Elektor's starter kit. With the Raspberry Pi Starter Kit, you have all the necessary components, the right power supply and memory card, with a case, to get started.

Whether you want to build your own media player, smart-home controller, or pocket-sized desktop PC. With a starter kit, you have everything at once to install and use the world's most popular and widely used minicomputer.

The benefits of a Raspberry pi starter kit

With the Raspberry Pi starter kits, you have all the necessities in one go to get started. It takes a lot of time, especially for beginners, to buy all the components separately. With a starter kit, you have everything together right away!

It saves you a lot of time and also money when you don't have to purchase all the separate components. Especially as a beginner, it's convenient to start with the starter kits, as you can be overwhelmed by all the available information and the endless possibilities with a Raspberry Pi.

As Elektor is an official seller of the Raspberry Foundation, we receive the Raspberry kits directly from the developer's factory. Therefore, we offer you the lowest possible price for a starter kit and official accessories such as power supplies, cases, sensors, robots, cameras, displays, and books.

Starter kits for different Raspberry PI variants

Originally, the Raspberry Pi was intended for education in electronics, computers, and computer technology. Nowadays, Raspberry's hardware has made such a big leap in speed and computing power that Raspberry's are used at home and in industry.

Today, the open-source community still develops daily on the soft- and hardware of the different Raspberry products. This has led to the availability of various starter kits:

  • Raspberry Pi 4 Starterkit - The Pi 4 starter kit has everything you need to start with a full-fledged pocket-sized computer. It's your smart-home hub, media player, or desktop computer on a motherboard. The starter kit comes with:
    • Raspberry Pi 4 B (2, 4, or 8 GB RAM)
    • JOY-iT Aluminum case for Raspberry Pi 4 with passive cooling
    • Official EU Power Supply for Raspberry Pi 4 (black),
    • Official HDMI Cable for Raspberry Pi 4 (black)
    • and MicroSD card (32 GB) with pre-installed NOOBS
  • Raspberry Pi Zero Starterkit - The Zero is the smallest and cheapest Pi computer and, as the successor to the Pi 2 W, is much faster in daily practice. The Elektor starter kit comes with:
    • Raspberry Pi Zero 2 W,
    • official case, and
    • HDMI cable.
  • Raspberry Pico starter kit - With the Pico starter kit, you have the cheapest Raspberry Pi ever made. With this powerful, flexible, and versatile microcontroller board, it's possible to control light displays and IoT devices.

Login

Forgot password?

Don't have an account yet?
Create an account