SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic)

  • BrandSparkFun

Description

The NEO-M8U module is a 72-channel u-blox M8 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~2.5-meter accuracy. The module supports the concurrent reception of three GNSS systems. The combination of GNSS and integrated 3D sensor measurements on the NEO-M8U provide accurate, real-time positioning rates of up to 30Hz.

Compared to other GPS modules, this breakout maximizes position accuracy in dense cities or covered areas. Even under poor signal conditions, continuous positioning is provided in urban environments and is also available during complete signal loss (e.g. short tunnels and parking garages). With UDR, position begins as soon as power is applied to the board, even before the first GNSS fix is available! Lock time is further reduced with an on-board rechargeable battery; you'll have backup power enabling the GPS to get a hot lock within seconds!

Additionally, this u-blox receiver supports I²C (u-blox calls this Display Data Channel), making it perfect for the Qwiic compatibility, so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1'-spaced pins if you prefer to use a breadboard.

U-blox based GPS products are configurable using the popular but dense, windows program called u-centre. Plenty of different functions can be configured on the NEO-M8U: baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All of this can be done within the SparkFun Arduino Library!

The SparkFun NEO-M8U GPS Breakout is also equipped with an on-board rechargeable battery that provides power to the RTC on the NEO-M8U. This reduces the time-to-first fix from a cold start (~26s) to a hot start (~1.5s). The battery will maintain RTC and GNSS orbit data without being connected to power for plenty of time.

Features

  • Integrated U.FL connector for use with an antenna of your choice
  • 72-Channel GNSS Receiver
  • 2.5 m Horizontal Accuracy
  • 30 Hz Max Update Rate
  • Time-To-First-Fix:
    • Cold: 26 s
    • Hot: 1.5 s
  • Max Altitude: 50,000 m
  • Max G: ≤4
  • Max Velocity: 500 m/s
  • Velocity Accuracy: 0.5m/s
  • Heading Accuracy: 1 degree
  • Built-In Accelerometer and Gyroscope
  • Time Pulse Accuracy: 30 ns
  • 3.3 V VCC and I/O
    • Current Consumption: ~29 mA Continuous Tracking, Default Concurrent Mode
  • Software Configurable
    • Geofencing
    • Odometer
    • Spoofing Detection
    • External Interrupt
    • Pin Control
    • Low Power Mode
    • Many others!
  • Supports NMEA, UBX, and RTCM protocols over UART or I²C interfaces

Product form

The NEO-M8U module is a 72-channel u-blox M8 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS,... Read more

€ 71,95 incl. VAT
Members € 64,76

      Details

      SKU: 19656
      EAN: GPS-16329

      Description

      The NEO-M8U module is a 72-channel u-blox M8 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~2.5-meter accuracy. The module supports the concurrent reception of three GNSS systems. The combination of GNSS and integrated 3D sensor measurements on the NEO-M8U provide accurate, real-time positioning rates of up to 30Hz.

      Compared to other GPS modules, this breakout maximizes position accuracy in dense cities or covered areas. Even under poor signal conditions, continuous positioning is provided in urban environments and is also available during complete signal loss (e.g. short tunnels and parking garages). With UDR, position begins as soon as power is applied to the board, even before the first GNSS fix is available! Lock time is further reduced with an on-board rechargeable battery; you'll have backup power enabling the GPS to get a hot lock within seconds!

      Additionally, this u-blox receiver supports I²C (u-blox calls this Display Data Channel), making it perfect for the Qwiic compatibility, so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1'-spaced pins if you prefer to use a breadboard.

      U-blox based GPS products are configurable using the popular but dense, windows program called u-centre. Plenty of different functions can be configured on the NEO-M8U: baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All of this can be done within the SparkFun Arduino Library!

      The SparkFun NEO-M8U GPS Breakout is also equipped with an on-board rechargeable battery that provides power to the RTC on the NEO-M8U. This reduces the time-to-first fix from a cold start (~26s) to a hot start (~1.5s). The battery will maintain RTC and GNSS orbit data without being connected to power for plenty of time.

      Features

      • Integrated U.FL connector for use with an antenna of your choice
      • 72-Channel GNSS Receiver
      • 2.5 m Horizontal Accuracy
      • 30 Hz Max Update Rate
      • Time-To-First-Fix:
        • Cold: 26 s
        • Hot: 1.5 s
      • Max Altitude: 50,000 m
      • Max G: ≤4
      • Max Velocity: 500 m/s
      • Velocity Accuracy: 0.5m/s
      • Heading Accuracy: 1 degree
      • Built-In Accelerometer and Gyroscope
      • Time Pulse Accuracy: 30 ns
      • 3.3 V VCC and I/O
        • Current Consumption: ~29 mA Continuous Tracking, Default Concurrent Mode
      • Software Configurable
        • Geofencing
        • Odometer
        • Spoofing Detection
        • External Interrupt
        • Pin Control
        • Low Power Mode
        • Many others!
      • Supports NMEA, UBX, and RTCM protocols over UART or I²C interfaces

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      Login

      Forgot password?

      Don't have an account yet?
      Create an account