Arduino Nano ESP32 with Headers

Description

The Arduino Nano ESP32 (with and without headers) is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox). This is the first Arduino board to be based fully on an ESP32, and features Wi-Fi, Bluetooth LE, debugging via native USB in the Arduino IDE as well as low power.

The Nano ESP32 is compatible with the Arduino IoT Cloud, and has support for MicroPython. It is an ideal board for getting started with IoT development.

Features

  • Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects.
  • Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity.
  • Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps.
  • Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. The setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app.
  • HID support: Simulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer.

Specifications

Microcontroller u-blox NORA-W106 (ESP32-S3)
USB connector USB-C
Pins Built-in LED pins 13
Built-in RGB LED pins 14-16
Digital I/O pins 14
Analog input pins 8
PWM pins 5
External interrupts All digital pins
Connectivity Wi-Fi u-blox NORA-W106 (ESP32-S3)
Bluetooth u-blox NORA-W106 (ESP32-S3)
Communication UART 2x
I²C 1x, A4 (SDA), A5 (SCL)
SPI D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS)
Power I/O Voltage 3.3 V
Input voltage (nominal) 6-21 V
Source Current per I/O pin 40 mA
Sink Current per I/O pin 28 mA
Clock speed Processor Up to 240 MHz
Memory ROM 384 kB
SRAM 512 kB
External Flash 128 Mbit (16 MB)
Dimensions 18 x 45 mm

Downloads

Product form

The Arduino Nano ESP32 (with and without headers) is a Nano form factor board based on the ESP32-S3 (embedded in... Read more

€ 24,95 incl. VAT
Members € 22,46

    • Ship today? Order within Jun 15, 2024 17:00:00 +0200

    Details

    SKU: 20529
    EAN: 7630049203969

    Description

    The Arduino Nano ESP32 (with and without headers) is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox). This is the first Arduino board to be based fully on an ESP32, and features Wi-Fi, Bluetooth LE, debugging via native USB in the Arduino IDE as well as low power.

    The Nano ESP32 is compatible with the Arduino IoT Cloud, and has support for MicroPython. It is an ideal board for getting started with IoT development.

    Features

    • Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects.
    • Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity.
    • Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps.
    • Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. The setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app.
    • HID support: Simulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer.

    Specifications

    Microcontroller u-blox NORA-W106 (ESP32-S3)
    USB connector USB-C
    Pins Built-in LED pins 13
    Built-in RGB LED pins 14-16
    Digital I/O pins 14
    Analog input pins 8
    PWM pins 5
    External interrupts All digital pins
    Connectivity Wi-Fi u-blox NORA-W106 (ESP32-S3)
    Bluetooth u-blox NORA-W106 (ESP32-S3)
    Communication UART 2x
    I²C 1x, A4 (SDA), A5 (SCL)
    SPI D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS)
    Power I/O Voltage 3.3 V
    Input voltage (nominal) 6-21 V
    Source Current per I/O pin 40 mA
    Sink Current per I/O pin 28 mA
    Clock speed Processor Up to 240 MHz
    Memory ROM 384 kB
    SRAM 512 kB
    External Flash 128 Mbit (16 MB)
    Dimensions 18 x 45 mm

    Downloads

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    B
    Ben S.
    ESP32 Arduino style

    I used this product for the Circular Christmas Tree. I didn`t use micropython but the NeoPixels library from Adafruits. Although there seems to be a Nano ESP32 available at the ESP32 boards, I had to install the Arduino Nano ESP32 to be able to program the board. Furthermore, make sure to use the GPIO pinning style (legacy) via Tools -> Pinning Numbering -> By GPIO numbering (legacy). Using the By Arduino pinning (default) didn`t seemed to work for my when I used the Adafruits NeoPixels library.

    Login

    Forgot password?

    Don't have an account yet?
    Create an account