The Red Pitaya (STEMlab) is a credit card-sized, open-source test and measurement board that can be used to replace most measurement instruments used in electronics laboratories. With a single click, the board can transform into a web-based oscilloscope, spectrum analyser, signal generator, LCR meter, Bode plotter, and microcontroller.The Red Pitaya (STEMlab) can replace the many pieces of expensive measurement equipment found at professional research organisations and teaching laboratories. The device, that based on Linux, includes an FPGA, digital signal processing (DSP), dual core ARM Cortex processor, signal acquisition and generation circuitry, micro USB socket, microSD card slot, RJ45 socket for Ethernet connection, and USB socket – all powered from an external mains adaptor.This book is an introduction to electronics. It aims to teach the principles and applications of basic electronics by carrying out real experiments using the Red Pitaya (STEMlab). The book includes many chapters on basic electronics and teaches the theory and use of electronic components including resistors, capacitors, inductors, diodes, transistors, and operational amplifiers in electronic circuits. Many fun and interesting Red Pitaya (STEMlab) experiments are included in the book. The book also makes an introduction to visual programming environment.The book is written for college level and first year university students studying electrical or electronic engineering.
The STEMlab sensor extension module enables users to interact with more than 30 sensors, indicators and actuators directly from the STEMlab Visual Programming environment. Users can immediately start measuring temperature, moisture, alcohol, water level, vibrations, UV light, sound, pressure, air quality detect motion,... as well as actuators and indicators like LEDs, displays, motors or relays in order to control high load devices. Furthermore, the sensor extension module also enables users to connect to the Arduino standard shields and extend its functionalities even further. The sensor extension module is not just a perfect add on for newcomers having fun while learning to program and bring their ideas to fruition - but also for developers that need, or would like to prototype their ideas faster. Features 13 connectors that enable users to connect up to 30 different types of sensor, indicators & actuators that are all supported by STEMlab Visual Programming environment Arduino shield compatibility Several jumpers for configuration of I/Os & power Additional power can be provided via an on board mini USB connector Please note: no sensors and no STEMlab board are included with this extension!
STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing. The STEMlab 125-14 unit is equipped with a Micro USB socket used for console connection, a microSD slot for microSD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.Features
High performance hardware at a surprising price tag.
Replaces most essential instruments: (Oscilloscope, Spectrum analyser, Signal generator, LCR meter)
LAN or wireless access from any WEB browser via tablet or a PC regardless of the OS (MAC, Linux, Windows, Android, iOS).
LabView and MATLAB® interface.
Possibility to make your own application and share it with others.
Open source software.
RF inputs
Number of channels: 2
Bandwidth: 50 MHz (3 dB)
Sample rate: 125 Msps
Input impedance: 1 MΩ / 10 pF
Connector: SMA-F
RF outputs
Number of channels: 2
Bandwidth: 50 MHz
Sample rate: 125 Msps
Load impedance: 50 Ω
Connector: SMA-F
Auxiliary analog input channels
Number of channels: 4
Nominal sampling rate: 100 ksps
ADC resolution: 14 bit
Input voltage range: 0 to +3.5 V
Input coupling: DC
Connector: IDC connector
Auxiliary analog output channels
Number of channels: 4
Output type: Low pass filtered PWM
PWM time resolution: 4ns (1/250 MHz)
Output voltage range: 0 to +1.8 V
Dimensions: 107 x 60 x 21 mmKit contents
1x STEMlab 125-14 board
1x Aluminium case
1x micro USB power supply adaptor
1x microSD card (4 GB) with pre-installed OS
1x Ethernet cable (1 m)
2x Osciloscope probes
2x SMA to BCN adapter
2x 50 ohm termination
2x SMA T adapter
1x WIFI dongle
STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing. The STEMlab 125-14 unit is equipped with a Micro USB socket used for console connection, a microSD slot for microSD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.Features:• High performance hardware at a surprising price tag.• Replaces most essential instruments: (Oscilloscope, Spectrum analyser, Signal generator, LCR meter)• LAN or wireless access from any WEB browser via tablet or a PC regardless of the OS (MAC, Linux, Windows, Android, iOS).• LabView and MATLAB® interface.• Possibility to make your own application and share it with others.• Open source software.RF inputs:• Number of channels: 2• Bandwidth: 50 MHz (3 dB)• Sample rate: 125 Msps• Input impedance: 1 MΩ / 10 pF• Connector: SMA-FRF outputs:• Number of channels: 2• Bandwidth: 50 MHz• Sample rate: 125 Msps• Load impedance: 50 Ω• Connector: SMA-FAuxiliary analog input channels:• Number of channels: 4• Nominal sampling rate: 100 ksps• ADC resolution: 14 bit• Input voltage range: 0 to +3.5 V• Input coupling: DC• Connector: IDC connectorAuxiliary analog output channels:• Number of channels: 4• Output type: Low pass filtered PWM• PWM time resolution: 4ns (1/250 MHz)• Output voltage range: 0 to +1.8 VDimensions: 107 x 60 x 21 mmCalibration:Calibration is performed in noise controlled environment. Inputs and outputs gains are calibrated with 0.02 % and 0.003 % DC reference voltage standards. Input gains calibration is performed in medium size timebase range. STEMlab 125-14 is non-shielded device and its inputs/outputs ground is not connected to the earth grounding as it is in case of classical Oscilloscopes. To achieve calibration results given below, STEMlab 125-14 must be grounded and shielded. Inputs LV settings (+/- 1 V range) LV settings (+/- 1 V range) DC gain accuracy @ 122 kS/s DC offset @ 122 kS/s DC gain accuracy @ 122 kS/s DC offset @ 122 kS/s 0.2 % +/- 0.5 mV 0.4 % +/- 2 mV Outputs DC offset DC gain accuracy Ripple @ 0.5V DC +/- 4 mV 0.4 % 0.4 mVpp Kit contents:• 1x STEMlab 125-14 board with calibrated Inputs and Outputs• 1x Aluminium case• 1x micro USB power supply adaptor• 1x microSD card (4 GB) with pre-installed OS• 1x Ethernet cable (1 m)• 2x Osciloscope probes• 2x SMA to BCN adapter• 2x 50 ohm termination• 2x SMA T adapter• 1x WIFI dongle
STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing. The STEMlab 125-14 unit is equipped with a Micro USB socket used for console connection, a microSD slot for microSD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.Features:• High performance hardware at a surprising price tag.• Replaces most essential instruments: (Oscilloscope, Spectrum analyser, Signal generator, LCR meter)• LAN or wireless access from any WEB browser via tablet or a PC regardless of the OS (MAC, Linux, Windows, Android, iOS).• LabView and MATLAB® interface.• Possibility to make your own application and share it with others.• Open source software.RF inputs:• Number of channels: 2• Bandwidth: 50 MHz (3 dB)• Sample rate: 125 Msps• Input impedance: 1 MΩ / 10 pF• Connector: SMA-FRF outputs:• Number of channels: 2• Bandwidth: 50 MHz• Sample rate: 125 Msps• Load impedance: 50 Ω• Connector: SMA-FAuxiliary analog input channels:• Number of channels: 4• Nominal sampling rate: 100 ksps• ADC resolution: 14 bit• Input voltage range: 0 to +3.5 V• Input coupling: DC• Connector: IDC connectorAuxiliary analog output channels:• Number of channels: 4• Output type: Low pass filtered PWM• PWM time resolution: 4ns (1/250 MHz)• Output voltage range: 0 to +1.8 VDimensions: 107 x 60 x 21 mmKit contents:• 1x STEMlab 125-14 board• 1x micro USB power supply adaptor• 1x microSD card (4 GB) with pre-installed OS• 1x Ethernet cable (1 m)
In this category you will find various STEMlab devices that can replace many expensive measuring instruments for your laboratory and help you learn faster.
