This newly developed and innovative digital storage oscilloscope offers cutting-edge technology and performance, and multi-functionality for different user groups from the electronics, service, development or industrial sector.
The unit benefits from a clean and fast waveform display thanks to its used 12-bit technology which can be represented by its fast waveform update rate and accurate detection of even the smallest error and variations in waveform display.
Also the slim case design at only 9 cm overall depth of the device and the intuitive operability while delivering excellent image display on the high-resolution Touchscreen TFT-display should be highlighted.
In addition to the 2-channel oscilloscope a full digital multimeter with voltage, current, resistance and capacitance measuring range is integrated in the device. Additionally arbitrary waveforms can be outputted with the integrated 25 MHz waveform generator.
Furthermore, this device has a LAN interface for integration into networks and a USB interface for direct data transfer to the user's PC. Measurement data can also be saved directly to a USB storage device or to the internal memory with menu-controlled file manager. You can also connect an external video monitor or display over the integrated VGA port, so the display size can be increased for a better visibility.
About wireless LAN, the device can either be integrated into the existing network or the oscilloscope creates a private network that your Android device found and can be Connected. can be queried in real time over the phone or tablet then the oscilloscope and the generator function.
|Display||20 cm (8“) Touchscreen TFT with 65536 Colors|
|Resolution||800 x 600 Pixel|
|Vertical Resolution||12 bits|
|Record length||40 M|
|Waveform Refresh Rate||75,000 wfms/s|
|Horizontal Scale||2 ns/div - 1000 s/div, step by 1 - 2 - 5|
|Rise Time||≤ 3.5ns|
|Input Impedance||1 MΩ ± 2%, in parallel with 15 pF ± 5 pF; 50 Ω ± 2%|
|Channel Isolation||50 Hz : 100 : 1, 10 MHz : 40 : 1|
|Max Input Voltage||1 MΩ≤300 Vrms; 50 Ω≤5 Vrms|
|DC Accuracy||average ≥16：± (3% reading + 0.05 div) for △V|
|Input Coupling||DC, AC, and GND|
|Vertical Sensitivity||1 mV/div - 10 V/div (at input)|
|Trigger Type||Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic|
|Trigger Mode||Auto, Normal and Single|
|Automatic Measurement||Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count|
|Math function||＋, －, ×, ÷, FFT|
|Waveform Storage||100 waveforms|
|Display||3 ¾ digits (max 4000 count)|
|Capacitance||51.2 nF - 100 uF: ±(3% ± 3 digits)|
|Voltage||VDC: 400 mV, 4 V, 400 V: ±(1 ± 1 digit); max input: DC 1000 V
VAC: 4V, 40V, 400V: ±(1 ± 3 digits); frequency: 40Hz - 400Hz; max input: AC 750V (virtual value)
|Current||DC: 40mA, 400mA: ±(1.5% ± 1 digit); 10A: ±(3% ± 3 digits)
AC: 40mA: ±(1.5% ± 3 digits), 400mA: ±(2% ± 1 digit), 10A: ±(3% ± 3 digits)
|Resistance||400 Ω: ± (1% ± 3 digits),4 kΩ - 40 MΩ: ± (1% ± 1 digit)|
|Arbitrary Waveform Generator|
|Max. Frequency||25 MHz|
|Sample Rate||125 MS/s|
|Vertical Resolution||14 bits|
|Amplitude Range||10 mVpp - 6 Vpp|
|Waveform Length||8 K|
|Standard Waveform||Sine, Square, Pulse, Ramp|
|Arbitrary Waveform||Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, Noise, and others, total 46 built-in waveforms, and user-defined arbitrary waveform|
|Interfaces USB host, USB device, W-LAN, LAN, VGA|
|Operation voltage||100 V - 240 V AC, 50/60 Hz, CAT II|
|Dimensions (WxHxD)||340 x 177 x 90 mm|
|Weight||approx. 2.6 kg|