ESP32

1 product


  •  -24% Phambili Newt 2.7" IoT Display (powered by ESP32 - S2) - Elektor

    Phambili Phambili Newt 2.7" IoT Display (powered by ESP32-S2)

    1 review

    A low-power, open source, 2.7-inch IoT display powered by an ESP32-S2 module and featuring SHARP's Memory-in-Pixel (MiP) screen technology The Newt is a battery-powered, always-on, wall-mountable display that can go online to retrieve weather, calendars, sports scores, to-do lists, quotes…really anything on the Internet! It is powered by an ESP32-S2 microcontroller that you can program with Arduino, CircuitPython, MicroPython, or ESP-IDF. It's perfect for makers: Sharp’s Memory-in-Pixel (MiP) technology avoids the slow refresh times associated with E-Ink displays A real-time clock (RTC) was added to support timers and alarms The Newt was designed with battery operation in mind; every component on the board was chosen for its ability to operate at low power. Newt was designed to operate 'untethered,' which means it can be mounted in places where a power cord would be inconvenient, for example a wall, refrigerator, mirror, or dry-erase board. With the optional stand, desks, shelves, and nightstands are also good options. Newt is open source, and all design files and libraries are available for review, use, and modification. However, doing that is not required. Each Newt is delivered with working code with the following features: Current weather details Hourly and daily weather forecast Alarm Timer Inspirational quotes Air-quality forecast Habit calendar Pomodoro timer Oblique Strategy cards Only following the Wi-Fi provisioning instructions is needed to get started. No app downloads are required. Specifications Display Sharp Memory LCD Screen Size 2.7 inch Resolution 240 x 400 Deep Sleep Current 30 uA Refresh Rate < 0.001 s Periodic Screen Refresh Required No Input Buttons 10 capacitive pads, 1 push button RTC included Yes Speaker included Yes Power Input USB Type-C Battery included No Programming Languages Arduino, CircuitPython, ESP IDF, MicroPython Dimensions 91 x 61 x 9 mm Microcontroller Espressif ESP32-S2-WROVER Module with 4 MB flash and 2 MB PSRAM Wi-Fi capable Supports Arduino, MicroPython, CircuitPython, and ESP-IDF Deep sleep current as low as 25 μA Display 2.7-inch, 240 x 400 pixel MiP LCD Capable of delivering high-contrast, high-resolution, low-latency content with ultra-low power consumption Reflective mode leverages ambient light to eliminate the need for a backlight Time Keeping, Timers, and Alarms Micro Crystal RV-3028-C7 RTC Optimized for extreme low-power consumption (45 μA) Able to simultaneously manage a periodic timer, a countdown timer, and an alarm Hardware interrupt for timers and alarms 43 bytes of non-volatile user memory, 2 bytes of user RAM Separate UNIX time counter Buzzer Speaker/buzzer with mini class-D amplifier on DAC output A0 can play tones or lo-fi audio clips User Input Power switch Two programmable tactile buttons for Reset and Boot 10 capacitive touchpads Power Newt is designed to operate for one to two months between charges using a 500 mAH LiPo battery. The exact run time varies. (Heavy Wi-Fi use, in particular, will reduce battery charge more quickly.) USB Type-C connector for programming, power, and charging Low-quiescence voltage regulator (TOREX XC6220) that can output 1 A of current and operate as low as 8 μA. JST connector for a Lithium-Ion battery Battery-charging circuity (MCP73831) Low-battery indicator (1 μA quiescence current) Software Newt hardware is compatible with open-source Arduino libraries for ESP32-S2, Adafruit GFX (fonts), Adafruit Sharp Memory Display (display writing), and RTC RV-3028-C7 (RTC) Arduino libraries and sample programs are under development and will be available in our GitHub repository before launch CircuitPython libraries and registration are on the roadmap, with the development of a CircuitPython library for the RV-3028 real-time clock as a key dependency Included Phambili Newt – Fully assembled with pre-loaded firmware Laser-cut desktop stand Mini-magnet feet Required screws Support & Documentation Full instructions for use GitHub: Arduino Library and Codebase GitHub: Board schematics Videos of prototypes or demos (build tracked on Hackaday)

    € 144,95€ 109,95

    Members identical

The ESP32 is a chip designed for mobile, wearable electronics and Internet-of-Things (IoT) applications. It's packed with all the state-of-the-art low-power features you need, including clock gating, multiple power modes and dynamic power scaling.

Microcontroller with Wi-Fi and Bluetooth

The ESP32 is a highly integrated chip that combines Wi-Fi and Bluetooth capabilities with a powerful CPU and memory. It is ideal for applications that require low power consumption, such as sensors and wearable devices.

ESP32 offers two CPU cores that can be controlled separately, clocked up to 240 MHz, and each equipped with its own set of peripherals. In addition to the CPU cores, the ESP32 has a special Tensilica LX6 microprocessor for ultra-low power co-processing.

ESP32 module and applications

The ESP32 module can be used in different ways. The most popular ways to use the ESP32 in a project is:

ESP32 as Arduino compatible board

The ESP32 can be used as an Arduino compatible board. This means you can use the Arduino IDE to develop applications for the ESP32. The ESP offers users the ability to make WiFi and Bluetooth connections.

ESP32 as a standalone microcontroller

The ESP32 can also be used as a standalone microcontroller. This means you can develop applications for the ESP32 without using the Arduino IDE. The ESP32 is a good choice for many Internet of Things applications. The built-in WiFi and Bluetooth make it perfect for wireless applications.

Internet of Things projects with ESP32

The ESP32 is a great choice for many Internet of Things applications. The built-in WiFi and Bluetooth make it perfect for wireless applications. The ESP32 is also a very popular microcontroller for hobbyists. Some popular applications for the ESP32 are:

  • Home automation
  • IoT devices
  • Wearable electronics

Manual and books about ESP32

When you work with ESP modules for the first time, it is nice to receive an explanation so that you become familiar with the possibilities and projects with ESP32 technology. The Official ESP32 Book is a book that takes you step by step as a beginner. The Elektor ESP32 Smart Kit offers beginners everything they need to follow the projects in the book.

Login

Forgot password?

Don't have an account yet?
Create an account