3 products

  •  -25% Microchip AVR-IoT WA Development Board

    Microchip Microchip AVR-IoT WA Development Board

    The AVR-IoT WA development board combines a powerful ATmega4808 AVR MCU, an ATECC608A CryptoAuthentication™ secure element IC and the fully certified ATWINC1510 Wi-Fi network controller – which provides the most simple and effective way to connect your embedded application to Amazon Web Services (AWS). The board also includes an on-board debugger, and requires no external hardware to program and debug the MCU.Out of the box, the MCU comes preloaded with a firmware image that enables you to quickly connect and send data to the AWS platform using the on-board temperature and light sensors. Once you are ready to build your own custom design, you can easily generate code using the free software libraries in Atmel START or MPLAB Code Configurator (MCC).The AVR-IoT WA board is supported by two award-winning Integrated Development Environments (IDEs) – Atmel Studio and Microchip MPLAB X IDE – giving you the freedom to innovate with your environment of choice.Features ATmega4808 microcontroller Four user LED’s Two mechanical buttons mikroBUS header footprint TEMT6000 Light sensor MCP9808 Temperature sensor ATECC608A CryptoAuthentication™ device WINC1510 WiFi Module On-board Debugger Auto-ID for board identification in Atmel Studio and Microchip MPLAB X One green board power and status LED Programming and debugging Virtual COM port (CDC) Two DGI GPIO lines USB and battery powered Integrated Li-Ion/LiPo battery charger

    € 39,95€ 29,95

    Members identical

  • Microchip MPLAB PICkit 5 in-circuit debugger/programmer

    Microchip Microchip MPLAB PICkit 5 in-circuit debugger/programmer

    The MPLAB PICkit 5 in-circuit debugger/programmer enables quick prototyping and portable, production-ready programming for all Microchip devices, including PIC microcontrollers (MCUs) and dsPIC Digital Signal Controllers (DSCs), AVR and SAM devices and Arm Cortex-based microprocessors (MPUs). It works alongside the MPLAB X Integrated Development Environment (IDE) to provide a powerful and easy-to-use Graphical User Interface (GUI) for debugging and programming. Alternatively, the MPLAB PICkit 5 in-circuit debugger/programmer can be used stand-alone with the MPLAB Programmer-to-Go (PTG) mobile app, allowing you to connect to the tool from your smartphone via Bluetooth. With stand-alone programming features accessible from your smartphone, the MPLAB PICkit 5 in-circuit debugger/programmer is a versatile programming companion that lets you prototype and debug your solution and then unplug and bring the device with you to deploy that solution out in the field. Features Improved Programmer-to-Go (PTG) support with the MPLAB PTG mobile app Connect wirelessly from your smartphone via Bluetooth Select from multiple saved program images on the SD card Start programming from the app or by pressing on the logo Supply 150 mA to the target Option to be self-powered from the target (2.7 V to 5 V) Simplify your workspace USB-C connector and cable No external power needed when the device is powered by high-speed USB 2.0 Use the eight-pin single in-line header Supports JTAG, SWD, UART VCP Adapter board allows use of standard connectors for JTAG, SWD, ICSP, and AVR Protocols Reduce Costs Features and performance at a fraction of the cost of comparable debuggers/programmers Included 1x MPLAB PICkit 5 In-Circuit Debugger/Programmer 1x USB-A to USB-C cable 2x MPLAB PICkit 5 In-Circuit Debugger/Programmer (stickers) Downloads User guide MPLAB X IDE

    € 164,95

    Members € 148,46

  • Microchip MPLAB ICD 5 in-circuit debugger/programmer

    Microchip Microchip MPLAB ICD 5 in-circuit debugger/programmer

    The MPLAB ICD 5 In-Circuit Debugger/Programmer offers advanced connectivity and power options for developers of designs based on PIC, AVR and SAM devices and dsPIC Digital Signal Controllers (DSCs). It debugs and programs with the powerful and easy-to-use graphical user interface of MPLAB X Integrated Development Environment (IDE). This next-generation tool offers a variety of capabilities and features that you would normally find in more expensive products to speed up your development and reduce your debug time. With its support for Fast Ethernet connectivity and Power over Ethernet Plus (PoE+), the MPLAB ICD 5 Debugger/Programmer offers flexibility and the convenience of remote development while isolating your application from environmental conditions. Whether you're an experienced developer or just starting out, the MPLAB ICD 5 In-Circuit Debugger/Programmer will accelerate your development process and help you take your designs to the next level. Features USB-C interface makes it easy to connect to a PC High-Speed USB 2.0 host PC interface supports speeds up to 480 Mbps for fast data transfer rates PoE+ (IEEE 802.3at) offers a convenient and flexible option to power up the debugger/programmer and deliver power to the target Fast Ethernet connectivity supports speeds up to 100 Mbps Wired/DHCP/APIAP IP addressing Static IP addressing Connects to more targets using an RJ11 or RJ45 modular cable Includes adapter board that supports JTAG, SWD, ICSP and AVR MCU protocols Professional-grade safety features and support for devices ranging from 1.2 V to 5.5 V Safely powers the target at up to 1 A using the PoE power supply or a PC with a USB-C connector Receives feedback from debugger when an external power supply is needed for the target CE and RoHS compliant, conforms to industry standards Advanced trace capabilities Support for instrumented trace via the Arm Serial Wire Debug (SWD) interface Power monitoring Allows you to optimize your design's power consumption Captures power data, such as current and voltage values Works with MPLAB Data Visualizer, which graphically analyzes power data Data gateway interfaces UART over Windows Virtual COM Port (VCP) Power Continuous Integration/Continuous Delivery (CI/CD) Support Can be implemented over Ethernet using hardware in the loop Works with CI/CD wizard available with MPLAB X IDE v6.10 and later to set up system using Jenkins and Docker Powerful debugging High-powered debugging with MPLAB X IDE Multiple breakpoints, stopwatch and source code file debugging Selectable pull-up/pull-down option to the target interface in MPLAB X IDE’s editor for quick program modification and debugging High-speed programming Quick firmware reloading for fast debugging and in-circuit reprogramming Debugging speed can be adjusted for optimized programming Included MPLAB ICD 5 In-Circuit Debugger and Programmer USB-C cable Adapter kit Downloads User guide Datasheet

    € 649,00

    Members € 584,10


Forgot password?

Don't have an account yet?
Create an account