Search results for "wireless m"
JOY-iT JOY-iT Tasta-Mini - Mini Wireless Keyboard
This small 14.1 x 8.2 cm Mini Wireless Keyboard is a practical universal tool with an integrated touchpad that saves you the hassle of using a separate mouse. If you use your Raspberry as a multimedia platform, this keyboard is a must. The large range of 10 metres allows you to take control from the comfort of your sofa. Due to the integrated RGB lighting, operation in the dark is no problem. Beside many special keys all keys of a conventional keyboard are also present. The integrated rechargeable battery can be recharged conveniently via the existing Micro USB connection with any commercially available power supply unit. Features Full functionality of a large keyboard Many additional function keys Wireless connection with 10-meter range Integrated rechargeable battery / charging via Micro-USB Adjustable RGB illumination Touchpad Technical details Number of keys: 80 Keyboard layout: QWERTZ with ä, ü, ö Frequency: 2.4 GHz Transmission power: +5 db max. Operating voltage: 3.7 V Charge current: < 200 mA Current in idle state: < 30 µA Battery type: BL-5B Battery capacity: 300 mAh Special functions: Adjustable RGB backlight, media buttons, integrated touchpad, rechargeable battery Dimensions: 141 x 82 x 13 mm Weight: 105 g
€ 24,95
Members € 22,46
Kuongshun nRF24L01+ Wireless Transceiver Module (2.4 GHz)
NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5 GHz. Features Wireless transceiver including: Frequency generator, enhanced type, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator The output power channel selection and protocol settings can be set extremely low current consumption, through the SPI interface As the transmit mode, the transmit power is 6 dBm, the current is 9.0 mA, the accepted mode current is 12.3 mA, the current consumption of the power-down mode and standby mode are lower Built-in 2.4 GHz antenna, supports up to six channels of data reception Size: 15 x 29 mm (including antenna)
€ 7,95
Members € 7,16
YDLIDAR YDLIDAR G4 Lidar - 360-degree Laser Range Scanner (16 m)
After power on, YDLIDAR G4 start rotating and scanning the environment around it. The scanning distance is 16 m and the device offers a scanning rate of 9,000 times per second. It makes detailed examinations of its environment and can locate the smallest of objects surrounding it. Featuring a high-precision brushless motor and encoder disc mounted on bearings, it rotates smoothly and has a service life of up to 500,000 hours of operation. The G4 is an inexpensive solution for projects that require obstacle detection, obstacle avoidance, and/or simultaneous localization and mapping (SLAM). All YDLIDAR products are ROS ready. Features 360 degree 2D range scanning Stable performance, high precision 16 m range Strong resistance to environmental light interference Brushless motor drive, stable performance FDA Laser safety standard Class I 360 degree omnidirectional scanning, 5-12 Hz adaptive scanning frequency OptoMagnetic technology Wireless data communication Scanning rate of 9000 Hz Downloads Datasheet User Manual Development Manual SDK Tool ROS
€ 329,00
Members € 296,10
YDLIDAR YDLIDAR TG15 Outdoor Lidar - 360-degree Laser Range Scanner (15 m)
YDLIDAR TG15 is a 360-degree two-dimensional rangefinder. Based on the principle of TOF, it is equipped with related optics, electricity, and algorithm design to achieve high-frequency and high-precision distance measurement. The mechanical structure rotates 360 degrees to continuously output the angle information as well as the point cloud data of the scanning environment while ranging. Features 360 degree omnidirectional scanning ranging distance measurement Small distance error, stable performance and high accuracy IP65 protection level Strong resistance to ambient light interference Industrial grade brush-less motor drive for stable performance Laser power meets Class I laser safety standards 5-12 Hz adaptive scanning frequency (support customization) Photomagnetic fusion technology to achieve wireless communication, wireless power supply Ranging frequency up to 20 kHz (support customization) Applications Robot navigation and obstacle avoidance Industrial automation Robot ROS teaching and research Regional security Smart transportation Environmental scanning and 3D reconstruction Commercial robot /Robot vacuum cleaner Downloads Datasheet User Manual Development Manual SDK Tool ROS
€ 374,00
Members € 336,60
JOY-iT JOY-iT VAX-1030 Wireless Multifunction Meter
Voltage Range 0 V - 100 V Voltage Resolution 0.01 V Voltage Accuracy ± 2% - 3 Digit Current Range 1 A - 30 A Current Resolution 0.01 A Power Range 0 W - 200 kW Power Resolution 0.001 W Working Measuring Range 0 W - 4000 kWh Working Measuring Resolution 0.001 Wh Load Display Range 0 Ah - 2000 kWh Load Display Resolution 0.001 Ah Temperature Range -20 °C - 120 °C Time Range 0 - 99 days Time Resolution 1 sec Negative Overcurrent Protection 0 A - -300 A Positive Overcurrent Protection 0 A - 300 A Overvoltage Protection (OVP) 0 V - 100 V Undervoltage Protection (LVP) 0 V - 100 V Protection Delay Time 0 - 10 sec Relays Internal Communication Channels A - Z (26 channels) Address Range 01 - 99 Communication Range Up to 10 m Dimensions 113.2 mm x 57.2 mm x 48.8 mm Weight 315 g
€ 42,95
Members € 38,66
LDROBOT D500 LiDAR Kit - 360-degree Laser Range Scanner (12 m)
Time-of-flight ranging technology Using time-of-flight ranging technology, the distance is measured according to the flight time of the laser pulse. Within the effective detection range of 12 m, the radar ranging accuracy will not change with the distance, and the average ranging accuracy of ±45 mm can be achieved. With the first-class algorithm logic of LDROBOT, it can realize the robot's 360-degree environmental detection, autonomous mapping and obstacle detection. Long lasting Brushless Motor, high speed wireless data transmission, life time up to 10,000 hours of use. Resistant to bright light The rigorous optical design and powerful chip capability ensure that the STL-19P is resistant to strong light, and can effectively avoid strong light interference, and can resist 30,000 Lux of strong light, It is able to achieve high frequency and high precision distance measurement and accurate map building indoors and outdoors. 360° all-round laser-scanning The STL-19P rotates clockwise in the rangefinder core, enabling 360 degree scanning and range detection of the surrounding environment. This results in a contour map of the surrounding environment and a point cloud of information on the location of obstacles. Distance measurement up to 12 m radius The longer range allows the robot to perceive environmental information over a longer range, ensuring the robot's ability to cruise and build maps over a large area. Compact and stylish The compact structure design, with its stylish appearance, smaller size and lower power consumption, can be built into the machine, reducing the overall size and improving the robot's passability. Applications Home service robot Commercial service robot Special robot Drone Industrial robot Specifications Distance measuring range 0.02-12 m Scanning frequency 5-13 Hz Ranging accuracy ±45 mm Ranging frequency 4500 Hz Scanning angle 360° Size 38.6 x 38.6 x 34.8 mm Included 1x Lidar STL-19P 1x Serial line 1x Interface adapter 1x USB cable 1x User manual Downloads GitHub
€ 89,95
Members € 80,96
SB Components Lo-Fi - ESP32 based LoRa Wireless Communication Device (EU868)
Lo-Fi (ESP32 + LoRa combination) is the perfect solution for anyone looking to establish long-range wireless communication in a variety of applications with WiFi capabilities. LoRa offers exceptional range and easy connectivity, it allows you to seamlessly communicate with devices up to 5 km away. Devices provide an efficient and trustworthy choice for long-range wireless communication in addition to WiFi access to link internet clouds best suited for Internet of Things applications, enabling connectivity in remote and challenging settings. Features Device powered by powerful ESP32 S3 WROOM-1 which is having Xtensa dual-core 32-bit LX7 microprocessor, up to 240 MHz Inbuilt Wi-Fi & Bluetooth LE for wireless connectivity Type C interface for Programming/Power 1.14" TFT display for visual interactions GPIO breakouts for interfacing additional peripherals Breadboard compatible for easy DIY breadboarding projects 2 separate user programmable buttons along with Reset and Boot buttons 3.7 V Lithium Battery connector for a portable use case with an onboard charging option Use new generation LoRa spread spectrum to ensure stable communication For LoRa, faster speed and a longer data transmission range of up to 5 km Applications Internet of Things (IoT) Smart Home Automation Agricultural Automation Emergency Services Environmental Monitoring Industrial Automation Specifications Microcontroller: ESP32 S3 WROOM-1 Wireless Interface: WiFi, BLE, LoRa Protocol: 802.11b/g/n, Bluetooth 5.0 Memory Size: 16 MB Flash, 384 kB ROM, 8 MB SRAM Supply Voltage: 5 V Operating Voltage: 3.3 V Display Size: 1.14” Display Type: TFT Display resolution: 135 x 240 pixels Display driver: ST7789V Display Appearance: RGB Display color: 4k/65k/252k Display Luminance: 400 Cd/m² Operating Temperature: -20 to 70°C Storage Temperature: -30 to 80°C LoRa Module Specs: Carrier Frequency (License Free ISM): 868 MHz Chip: Based on SX1262 RF chip Range: 5Km Transmitting Power: 22 dBm Receiving Sensitivity: -147 dbm Data Rate: Up to 62.5 kbps Communication Port: UART serial Downloads Getting started guide Hardware design files Included 1x Lo-Fi Board 1x Antenna (868 MHz)
€ 49,95
Members € 44,96
Dragino Dragino LSN50 Waterproof Long Range Wireless LoRa Sensor Node (EU868)
The LSN50 wireless part is based on SX1276/SX1278 allows the user to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on. The LSN50 MCU part uses STM32l0x chip from ST, STML0x is the ultra-low-power STM32L072xx microcontrollers incorporate the connectivity power of the universal serial bus (USB 2.0 crystal-less) with the high-performance ARM® Cortex®-M0+ 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (192 Kbytes of Flash program memory, 6 Kbytes of data EEPROM and 20 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals. The LSN50 is an open-source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found on the STM site for rapid development. Features STM32L072CZT6 MCU SX1276/78 LoRa Wireless Modem Pre-load with ISP bootloader I2C,LPUSART1,USB 18 x Digital I/Os 2 x 12bit ADC; 1 x 12bit DAC MCU wakes up by UART or Interrupt LoRa™ Modem Preamble detection Baud rate configurable LoRaWAN 1.0.2 Specification Software base on STM32Cube HAL drivers Open-source hardware / software IP66 Waterproof Enclosure Ultra-Low power consumption AT Commands to setup parameters 4000mAh Battery for Long term use Applications Wireless Alarm and Security Systems Home and Building Automation Automated Meter Reading Industrial Monitoring and Control Long-range Irrigation Systems LoRa Spec 168 dB maximum link budget. +20 dBm - 100 mW constant RF output vs. +14 dBm high-efficiency PA. Programmable bit rate up to 300 kbps. High sensitivity: down to -148 dBm. Bullet-proof front end: IIP3 = -12.5 dBm. Excellent blocking immunity. Low RX current of 10.3 mA, 200 nA register retention. Fully integrated synthesizer with a resolution of 61 Hz. FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation. Built-in bit synchronizer for clock recovery. Preamble detection. 127 dB Dynamic Range RSSI. Automatic RF Sense and CAD with ultra-fast AFC. Packet engine up to 256 bytes with CRC. Built-in temperature sensor and low battery indicator. MCU Spec MCU: STM32L072CZT6 Flash: 192KB SRAM: 20KB EEPROM: 6KB Clock Speed: 32Mhz Absolute Maximum Ratings VCC: 0.5 V ~ 3.9 V Operating Tempature: -40°C ~ 85°C I/O pins: 0.5 V ~ VCC+0.5 V Common DC Characteristics Supply Voltage: 1.8 V ~ 3.6 V Operating Tempature: -40°C ~ 85°C I/O pins: STM32L072CZT6 datasheet Power Consumption STOP Mode: 2.7 μA @ 3.3 V RX Mode: 7.2 mA TX Mode: 125 mA@ 20 dbm Battery Li/SOCI2 unchargable battery Capacity: 4000 mAh Self Discharge: < 1% / Year @ 25°C Max continuously current: 130 mA Max boost current: 2 A, 1 second
€ 54,95
Members € 49,46
Elektor March/April 2024 (EN)
Elektor GREEN and GOLD members can download their digital edition here. Not a member yet? Click here. CaptureCountAn Object Detector and Counter on the Raspberry Pi 5 Voltage Reference With Arduino Pro MiniLinearize and Calibrate Your Analog Inputs FPGAs for BeginnersThe Path From MCU to FPGA Programming Update: STM32 Wireless Innovation Design Contest 2024 Bluetooth LE With MAUIControl Apps for Android & Co. Port-Expanding Breakout BoardIncrease the Number of I/Os on Your Dev Board AI SpecialistMachine Learning with the Jetson Nano 2024: An AI OdysseyFirst Forays Into TensorFlow 262,144 Ways to Play The Game of LifeA Reader’s Project in Brief From Life’s ExperienceThe Chinese Dragon Get Your (Brushed DC) Motor Running!Sample Projects from the Elektor Motor Control Development Bundle ESP32-RS-232 AdapterA Wireless Link for Classic Test Equipment Starting Out in Electronics……More About Opamps ESP Library Recommendations Piezoelectric DevicesPeculiar Parts, the Series A Smart Object CounterImage Recognition Made Easy with Edge Impulse Resolve Your Trickiest Embedded Development Challenges ESP32 TerminalA Handheld Device with a Touch-Capable Display Getting Started With the Zephyr RTOSAs Powerful as It Is Hard to Master Award-Winning EthicsA Dialog with CTO Alexander Gerfer of Würth Elektronik eiSos on Enabling Innovation and Mindful Behavior Err-lectronicsCorrections, Updates, and Readers’ Letters Infographics: Embedded and AI Square Wave Generation BenchmarksExploring ESP32, Pico, and Other Microcontrollers
€ 10,95
Members € 9,86
Elektor Digital Elektor September/October 2023 (PDF)
Elektor GREEN and GOLD members can download their digital edition here. Not a member yet? Click here. Raspberry Pi Pico as Spectrum AnalyzerFFTs on a Low-Cost Hardware Basis ±40-V Linear Voltage RegulatorAn Alternative Power Supply for the Fortissimo-100 Power Amplifier… and Others! MCU Wireless Communication Made FlexibleEEPROM Opens Networking Prospects for Wireless MCUs €5,000 up for grabs!Join the STM32 Wireless Innovation Design Contest 2023: An AI OdysseyGetting Started with ChatGPT’s Code Interpreter LoRa, a Swiss Army Knife (1)The LoRa Protocol and Its Advantages Adjustable Current Sink with Integrated Clock GeneratorTest Power Supplies, Voltage Converters and Batteries Two New Arduino UNO R4 Boards: Minima and WiFi Logarithmic PotentiometersThey’re Exponential! Motor Driver Breakout BoardA BoB for a 5 A DC Motor Driver with a 3×3 mm Size From Life’s ExperienceHazardous Electronics Is Cellular the Lowest-Power Option for IoT?LTE-M and NB-IoT Energy Requirements in LPWAN Deployments Wireless Communication in IoT Systems – Using Arduino MKR ModulesThe Right Board for Wi-Fi, LoRa, and Many More Standards AC Losses in Magnetic ComponentsAvoid Hot Inductors! Measurement for Optimal Cloud Deployment Matter Adoption: What does it take to deploy Matter devices? YARD Stick OneA Sub-1 GHz Wireless Test Tool Latching RelaysPeculiar Parts, the Series PIC O’Clock – In Touch with TimeDesigning an SDR Time Signal Receiver Due Diligence DirectiveBusiness as Usual Will Not Do Starting Out in Electronics……Voltage Amplification Infrasound Recorder with the Arduino Pro MiniA Sample Project from Elektor’s “Arduino & Co.” Book Cloud-Based Energy MeterWith ESP32 Module and PZEM-004T Voltage/Current Sensor A Bare-Metal Programming Guide (Part 2)Accurate Timing, the UART, and Debugging Hexadoku
€ 7,50
Members € 6,75
SparkFun SparkFun Thing Plus Matter (MGM240P)
The SparkFun Thing Plus Matter is the first easily accessible board of its kind that combines Matter and SparkFun’s Qwiic ecosystem for agile development and prototyping of Matter-based IoT devices. The MGM240P wireless module from Silicon Labs provides secure connectivity for both 802.15.4 with Mesh communication (Thread) and Bluetooth Low Energy 5.3 protocols. The module comes ready for integration into Silicon Labs' Matter IoT protocol for home automation.What is Matter? Simply put, Matter allows for consistent operation between smart home devices and IoT platforms without an Internet connection, even from different providers. In doing so, Matter is able to communicate between major IoT ecosystems in order to create a single wireless protocol that is easy, reliable, and secure to use.The Thing Plus Matter (MGM240P) includes Qwiic and LiPo battery connectors, and multiple GPIO pins capable of complete multiplexing through software. The board also features the MCP73831 single-cell LiPo charger as well as the MAX17048 fuel gauge to charge and monitor a connected battery. Lastly, a µSD card slot for any external memory needs is integrated.The MGM240P wireless module is built around the EFR32MG24 Wireless SoC with a 32-bit ARM Cortext-M33 core processor running at 39 MHz with 1536 kb Flash memory and 256 kb RAM. The MGM240P works with common 802.15.4 wireless protocols (Matter, ZigBee, and OpenThread) as well as Bluetooth Low Energy 5.3. The MGM240P supports Silicon Labs' Secure Vault for Thread applications.Specifications MGM240P Wireless Module Built around the EFR32MG24 Wireless SoC 32-bit ARM-M33 Core Processor (@ 39 MHz) 1536 kB Flash Memory 256 kB RAM Supports Multiple 802.15.4 Wireless Protocols (ZigBee and OpenThread) Bluetooth Low Energy 5.3 Matter-ready Secure Vault Support Built-in Antenna Thing Plus Form-Factor (Feather-compatible): Dimensions: 5.8 x 2.3 cm (2.30 x 0.9') 2 Mounting Holes:4-40 screw compatible 21 GPIO PTH Breakouts All pins have complete multiplexing capability through software SPI, I²C and UART interfaces mapped by default to labeled pins 13 GPIO (6 labeled as Analog, 7 labeled for GPIO)All function as either GPIO or Analog Built-in-Digital to Analog Converter (DAC) USB-C Connector 2-Pin JST LiPo Battery Connector for a LiPo Battery (not included) 4-Pin JST Qwiic Connector MC73831 Single-Cell LiPo ChargerConfigurable charge rate (500 mA Default, 100 mA Alternate) MAX17048 Single-Cell LiPo Fuel Gauge µSD Card Slot Low Power Consumption (15 µA when MGM240P is in Low Power Mode) LEDs: PWR – Red Power LED CHG – Yellow battery charging status LED STAT – Blue status LED Reset Button: Physical push-button Reset signal can be tied to A0 to enable use as a peripheral device Downloads Schematic Eagle Files Board Dimensions Hookup Guide Datasheet (MGM240P) Fritzing Part Thing+ Comparison Guide Qwiic Info Page GitHub Hardware Repo
€ 34,95
Members € 31,46
-
, by Jean-François Simon The RC-RICK-868-EV Wireless Modem: A Compelling Addition to Your Workbench
The RC-RICK-868 is a radio modem with a UART interface using LoRa modulation, designed for easy point-to-point communication. Let's take a look.